/// <summary> /// This sample demonstrates the creation of a baseline set dimension in a drawing. /// Create a drawing view and select multiple edges in the view before running the sample. /// </summary> /// <remarks></remarks> public void CreateBaselineDimensionSet() { // Set a reference to the drawing document. // This assumes a drawing document is active. DrawingDocument oDrawDoc = (DrawingDocument)_InvApplication.ActiveDocument; // Set a reference to the active sheet. Sheet oActiveSheet = default(Sheet); oActiveSheet = oDrawDoc.ActiveSheet; ObjectCollection oIntentCollection = default(ObjectCollection); oIntentCollection = _InvApplication.TransientObjects.CreateObjectCollection(); // Get all the selected drawing curve segments. DrawingCurve oDrawingCurve = default(DrawingCurve); foreach (DrawingCurveSegment oSeg in oDrawDoc.SelectSet) { // Set a reference to the drawing curve. oDrawingCurve = oSeg.Parent; GeometryIntent oDimIntent = oActiveSheet.CreateGeometryIntent(oDrawingCurve); oIntentCollection.Add(oDimIntent); } // Set a reference to the view to which the curve belongs. DrawingView oDrawingView = oDrawingCurve.Parent; // Set a reference to the baseline dimension sets collection. BaselineDimensionSets oBaselineSets = oActiveSheet.DrawingDimensions.BaselineDimensionSets; // Determine the placement point Point2d oPlacementPoint = _InvApplication.TransientGeometry.CreatePoint2d(oDrawingView.Left - 5, oDrawingView.Center.Y); // Create a vertical baseline set dimension. BaselineDimensionSet oBaselineSet = oBaselineSets.Add(oIntentCollection, oPlacementPoint, DimensionTypeEnum.kHorizontalDimensionType); }
private static void GetDrawingDimension() { try { inventorApp = (Inventor.Application)Marshal.GetActiveObject("Inventor.Application"); Console.WriteLine("查找到可用的实例"); } catch { Console.WriteLine("未打开Inventor"); return; } DrawingDocument drawingDocument = (DrawingDocument)inventorApp.ActiveDocument; //在Inventor当前正在显示的工程图不一样的时候,ActiveSheet也会发生变化 Console.WriteLine("打开的图纸:" + drawingDocument.ActiveSheet.Name + " " + drawingDocument.FullFileName); DrawingView drawingView = drawingDocument.ActiveSheet.DrawingViews[1]; //特别注明:该类及其方法仅针对模型和草图文件 GeneralDimensionsEnumerator generalDimensionsEnumerator = drawingDocument.ActiveSheet.DrawingDimensions.GeneralDimensions.Retrieve(drawingView); Console.WriteLine("generalDimensionsEnumerator.Count = " + generalDimensionsEnumerator.Count); if (generalDimensionsEnumerator.Count != 0) { for (int i = 1; i <= generalDimensionsEnumerator.Count; i++) { Console.WriteLine(generalDimensionsEnumerator[i].Text); } } //////////////////////////////////////////////////////////////////////////////////////////////////////// BaselineDimensionSets baselineDimensionSets = drawingDocument.ActiveSheet.DrawingDimensions.BaselineDimensionSets; Console.WriteLine("baselineDimensionSets.Count = " + baselineDimensionSets.Count); if (baselineDimensionSets.Count != 0) { for (int i = 1; i <= baselineDimensionSets.Count; i++) { BaselineDimensionSet baselineDimensionSet = baselineDimensionSets[i]; Console.WriteLine("baselineDimensionSet.Members = " + baselineDimensionSet.Members); Console.WriteLine("baselineDimensionSet.DimensionType" + baselineDimensionSet.DimensionType); } } //////////////////////////////////////////////////////////////////////////////////////////////////////// Balloons ballons = drawingDocument.ActiveSheet.Balloons; Console.WriteLine("ballons.Count = " + ballons.Count); Balloon balloon = null; if (ballons.Count != 0) { for (int i = 1; i <= ballons.Count; i++) { Console.WriteLine("\n------------------------ballons[" + i + "]------------------------"); balloon = ballons[i]; //Console.WriteLine("balloon.Leader.RootNode = " + balloon.Leader.RootNode); //打印出 System.__ComObject //Console.WriteLine("balloon.Position = " + balloon.Position); //打印出 System.__ComObject AttributeSets attributeSets = balloon.AttributeSets; Console.WriteLine("attributeSets.Count = " + attributeSets.Count); for (int j = 1; j <= attributeSets.Count; j++) { AttributeSet attributeSet = attributeSets[j]; Console.WriteLine("attributeSet.Name = " + attributeSet.Name); } BalloonValueSets balloonValueSets = balloon.BalloonValueSets; for (int j = 1; j <= balloonValueSets.Count; j++) { BalloonValueSet balloonValueSet = balloonValueSets[j]; Console.WriteLine("balloonValueSet.ItemNumber = " + balloonValueSet.ItemNumber); Console.WriteLine("balloonValueSet.Value = " + balloonValueSet.Value); Console.WriteLine("balloonValueSet.OverrideValue = " + balloonValueSet.OverrideValue); //Console.WriteLine("balloonValueSet.ReferencedFiles = " + balloonValueSet.ReferencedFiles); Console.WriteLine("balloonValueSet.Type = " + balloonValueSet.Type); } Leader leader = balloon.Leader; Console.WriteLine("leader.ArrowheadType = " + leader.ArrowheadType); Console.WriteLine("leader.Type = " + leader.Type); AttributeSets attributeSets_leader = leader.AttributeSets; Console.WriteLine("attributeSets_leader.Count = " + attributeSets_leader.Count); for (int j = 0; j < attributeSets_leader.Count; j++) { AttributeSet attributeSet = attributeSets[j]; Console.WriteLine("attributeSet_leader.Name = " + attributeSet.Name); } Console.WriteLine("END------------------------ballons[" + i + "]------------------------\n"); } } //////////////////////////////////////////////////////////////////////////////////////////////////////// //DrawingViews views = drawingDocument.ActiveSheet.DrawingViews; //Console.WriteLine("views.count = " + views.Count); Console.WriteLine("drawingDocument.SelectSet.Count = " + drawingDocument.SelectSet.Count); SelectSet selectSet = null; DrawingCurveSegment drawingCurveSegment = null; if (drawingDocument.SelectSet.Count == 0) { Console.WriteLine("Select a drawing view"); DrawingView view = inventorApp.CommandManager.Pick(SelectionFilterEnum.kDrawingViewFilter, "Select a drawing view"); //selectSet = inventorApp.CommandManager.Pick(SelectionFilterEnum.kDrawingSheetFilter, "Select drawing sheet!"); drawingCurveSegment = inventorApp.CommandManager.Pick(SelectionFilterEnum.kDrawingCurveSegmentFilter, "Select drawing segment filter"); } else { selectSet = drawingDocument.SelectSet; } //DrawingCurveSegment drawingCurveSegment = selectSet[1];//drawingDocument.SelectSet[1]; DrawingCurve drawingCurve = drawingCurveSegment.Parent; //Get the mid point of the selected curve assuming that the selection curve is linear Point2d MidPoint = drawingCurve.MidPoint; //Set a reference to the TransientGeometry object. TransientGeometry TG = inventorApp.TransientGeometry; Console.WriteLine("TG : " + (TG == null)); ObjectCollection LeaderPoints = inventorApp.TransientObjects.CreateObjectCollection(); Console.WriteLine("LeaderPoints : " + (LeaderPoints == null)); LeaderPoints.Add(TG.CreatePoint2d(MidPoint.X + 10, MidPoint.Y + 10)); LeaderPoints.Add(TG.CreatePoint2d(MidPoint.X + 10, MidPoint.Y + 5)); //Add the GeometryIntent to the leader points collection. //This is the geometry that the balloon will attach to. GeometryIntent geometryIntent = drawingDocument.ActiveSheet.CreateGeometryIntent(drawingCurve); LeaderPoints.Add(geometryIntent); //Set a reference to the parent drawing view of the selected curve //DrawingView drawingView = drawingCurve.Parent; //Set a reference to the referenced model document Document ModelDoc = drawingView.ReferencedDocumentDescriptor.ReferencedDocument; Console.WriteLine(ModelDoc.Type); //PartDocument ModelDoc = drawingView.ReferencedDocumentDescriptor.ReferencedDocument; //AssemblyDocument ModelDoc = drawingView.ReferencedDocumentDescriptor.ReferencedDocument; //Check if a partslist or a balloon has already been created for thie model Boolean IsDrawingBOMDefined = drawingDocument.DrawingBOMs.IsDrawingBOMDefined(ModelDoc.FullFileName); // Balloon balloon; if (IsDrawingBOMDefined) { //当DrawingBOM已经被定义了 //Just create the balloon with the leader points. All other arguments can be ignored Console.WriteLine("当DrawingBOM已经被定义了\n创建气泡标注"); balloon = drawingDocument.ActiveSheet.Balloons.Add(LeaderPoints); } else { //当DrawingBOM没有被定义 AssemblyDocument assemblyDocument = (AssemblyDocument)ModelDoc; AssemblyComponentDefinition assemblyComponentDefinition = assemblyDocument.ComponentDefinition; ///* //First check if the 'structured' BOM view has been enabled in the model //Set a reference to the model's BOM object //BOM bom = ModelDoc.ComponentDefinition.BOM; BOM bom = assemblyComponentDefinition.BOM; if (bom.StructuredViewEnabled) { //Level needs to be specifieed. Numbering options jave already been defined. //Get the Level('All levels' of 'First level only') from the model BOM view - must use the same here PartsListLevelEnum Level; if (bom.StructuredViewFirstLevelOnly) { Level = PartsListLevelEnum.kStructured; } else { Level = PartsListLevelEnum.kStructuredAllLevels; } } else { //Level and numbering options must be specifieed. //The corresponding model BOM view will automatically be enabled NameValueMap NumberingScheme = inventorApp.TransientObjects.CreateNameValueMap(); //Add the option for a comma delimiter NumberingScheme.Add("Delimeter", ","); //Create the balloon by specifying the level and numbering scheme balloon = drawingDocument.ActiveSheet.Balloons.Add(LeaderPoints, PartsListLevelEnum.kStructuredAllLevels, NumberingScheme); } //*/ } }