//NOTE: I think the axManifoldMap.NativeToScreen() method does the same as this.
public static Manifold.Interop.Point convertPointCoordinates(AxManifold.Interop.AxComponentControl p_Target, Manifold.Interop.Drawing p_Source, Manifold.Interop.Point p_objPoint)
{
Manifold.Interop.CoordinateSystem csSource = null;
Manifold.Interop.CoordinateSystem csTarget = null;
csTarget = p_Target.Application.DefaultCoordinateSystemLatLon;
if (p_Source.CoordinateSystemVerified == true)
{
csSource = p_Source.CoordinateSystem;
}
else
{
p_Source.CoordinateSystem = p_Target.Application.Application.NewCoordinateSystem("Irish Grid");
csSource = p_Target.Application.Application.NewCoordinateSystem("Irish Grid");
p_Source.CoordinateSystemVerified = true;
}
Manifold.Interop.CoordinateConverter objConverter = p_Target.Application.NewCoordinateConverter();
objConverter.Prepare((Manifold.Interop.Base)csTarget, (Manifold.Interop.Base)csSource);
objConverter.Convert((Manifold.Interop.Base)p_objPoint, null);
return p_objPoint;
}
private void axComponentControl1_EndTrack(object sender, AxManifold.Interop.IComponentControlEvents_EndTrackEvent e)
{
try
{
switch (axComponentControl1.MouseMode)
{
case Manifold.Interop.ControlMouseMode.ControlMouseModeGenericBoxCenter:
break;
case Manifold.Interop.ControlMouseMode.ControlMouseModeGenericPoint:
double x, y;
x = e.pArgs.GeomLatLon.Box.XMax;
y = e.pArgs.GeomLatLon.Box.YMax;
DrawPoint(x, y);
break;
case Manifold.Interop.ControlMouseMode.ControlMouseModeGenericLine:
DrawLine(e.pArgs.GeomNative);
break;
case Manifold.Interop.ControlMouseMode.ControlMouseModeGenericArea:
DrawArea(e.pArgs.GeomNative);
break;
default:
break;
}
}
catch (Exception err)
{
MessageBox.Show("ERROR:" + err.Message);
}
finally
{
EventHandler_onEditModeChanged(this, new ModeTypeEventArgs(MODETYPE_OPERATION.SelectMode));
}
}
private void axComponentControl1_ClickEvent(object sender, AxManifold.Interop.IComponentControlEvents_ClickEvent e)
{
try
{
double x, y;
x = e.pArgs.LocationLatLon.X;
y = e.pArgs.LocationLatLon.Y;
if (axComponentControl1.MouseMode == Manifold.Interop.ControlMouseMode.ControlMouseModeNone)
{
switch (e.pArgs.Button)
{
//HighLight is default selection
case Manifold.Interop.ControlMouseButton.MouseButtonLeft:
//HACK: adjust vertical location for the control's tool bar
Manifold.Interop.Point objPointScreen = e.pArgs.LocationScreen;
objPointScreen.Y += 27;
mapObjectSelection(objPointScreen);
break;
case Manifold.Interop.ControlMouseButton.MouseButtonMiddle:
break;
case Manifold.Interop.ControlMouseButton.MouseButtonRight:
this._IsDrawing = false;
break;
default:
break;
}
}
}
catch (Exception err)
{
MessageBox.Show("ERROR:" + err.Message);
}
}
/// <summary>
///
/// </summary>
/// <param name="p_MapControl">Reference to the Manifold ActiveX control.</param>
/// <param name="p_DrawingOriginalEditObject">The Drawing layer which contains the original Line\Area to edit.</param>
/// <param name="p_DrawingEdit">A temporary Drawing layer - used only to display inflection Points of the Line\area to edit.</param>
/// <param name="p_Draw">Internal class used to draw ojects on Drawings.</param>
/// <param name="p_MODETYPE_OPERATION"></param>
public EditDrawingFactorySQL(AxManifold.Interop.AxComponentControl p_MapControl, Manifold.Interop.Drawing p_DrawingOriginalEditObject, Manifold.Interop.Drawing p_DrawingEdit, MODETYPE_OPERATION p_MODETYPE_OPERATION)
{
try
{
//Map events
this._MapControl = p_MapControl;
this._MapControl.MouseDownEvent += new AxManifold.Interop.IComponentControlEvents_MouseDownEventHandler(this.MapControl_MouseDownEvent);
this._MapControl.MouseUpEvent += new AxManifold.Interop.IComponentControlEvents_MouseUpEventHandler(this.MapControl_MouseUpEvent);
this._MapControl.MouseMoveEvent += new AxManifold.Interop.IComponentControlEvents_MouseMoveEventHandler(this.MapControl_MouseMoveEvent);
if (p_DrawingOriginalEditObject == null )
{
throw new Exception("The Original Edit objects Drawing was null in the EditDrawingFactory constructor. Assign an initialised Manifold.Interop.Drawing to it before calling this class.");
}
else
{
this._DrawingOriginalEditObject = p_DrawingOriginalEditObject;
}
if (p_DrawingEdit == null)
{
throw new Exception("The Edit Drawing layer was null in the EditDrawingFactory constructor. Assign an initialised Manifold.Interop.Drawing to it before calling this class.");
}
else
{
this._DrawingEdit = p_DrawingEdit;
}
this._EditModeOperation = p_MODETYPE_OPERATION;
clearEditLayer();
}
catch (Exception objEx)
{
throw;
}
}
private void MapControl_MouseUpEvent(object sender, AxManifold.Interop.IComponentControlEvents_MouseUpEvent e)
{
try
{
bool bPrepareEdit = false;
if (this._MouseIsClickedDown == true &&
(Utility.isModeTypeEditEnabled(EditModeOperation) == true))
{
//Need to set this here because it gets updated in the 'prepareEditObject()' methods
//and the GEOMChanged Event needs the original value before it was Edited.
//string sSelectedManifoldObjectOriginalGEOM = this._SelectedManifoldObjectOriginalGEOM;
switch (EditModeOperation)
{
case MODETYPE_OPERATION.EditDeleteCoordinate:
this._DrawingEdit.SelectNone();
break;
case MODETYPE_OPERATION.EditAddCoordinate:
this._DrawingEdit.SelectNone();
break;
case MODETYPE_OPERATION.EditModeEnabled:
if (this._SelectedEditManifoldID > 0 && this._UserMovedCoordinate == true)
{
Manifold.Interop.Point objPointScreen = e.pArgs.LocationScreen;
objPointScreen.Y += this._YCoordMapClickOffset;
objPointScreen = this._MapControl.ScreenToNative(objPointScreen);
moveOriginalPointCoordinate(objPointScreen.X, objPointScreen.Y);
bPrepareEdit = true;
//After MouseUp Event - remove selection for move so that it dosnt move anymore
this._SelectedEditManifoldID = -1;
}
break;
case MODETYPE_OPERATION.EditMoveGeom:
if (this._SelectedEditManifoldID > 0 && this._UserMovedGeom == true)
{
this._SelectedEditManifoldPointEnd = e.pArgs.LocationNative;
if (this._SelectedEditManifoldPointStart != null && this._SelectedEditManifoldPointEnd != null)
{
//Move Geom the difference in meters Horizontally and Vertically
moveGeomWithSQL();
bPrepareEdit = true;
}
//After MouseUp Event - remove selection for move so that it dosnt move anymore
this._SelectedEditManifoldID = -1;
}
break;
default:
break;
//}
}
if (this._DrawingOriginalEditObject.Selection.Count < 1 || Convert.ToInt32(this._DrawingOriginalEditObject.Selection[0].Record.get_Data("ID").ToString()) != this._SelectedManifoldID)
{
Utility.setSelection(this._MapControl, this._DrawingOriginalEditObject, this._SelectedManifoldID);
}
if (bPrepareEdit == true)
{
prepareEditObject();
}
}
}
catch (Exception objEx)
{
throw;
}
finally
{
this._UserMovedCoordinate = false;
this._UserAddedCoordinate = false;
this._UserDeletedCoordinate = false;
this._UserMovedGeom = false;
this._MouseIsClickedDown = false;
this._SelectedEditManifoldPointEnd = null;
this._SelectedEditManifoldPointStart = null;
this._SelectedPointBranchIndex = -1;
this._SelectedPointIndex = -1;
}
}
private void MapControl_MouseMoveEvent(object sender, AxManifold.Interop.IComponentControlEvents_MouseMoveEvent e)
{
try
{
//Move Coordinate
if (EditModeOperation == MODETYPE_OPERATION.EditModeEnabled && this._MouseIsClickedDown == true)
{
if (this._DrawingOriginalEditObject.Selection.Count < 1 || Convert.ToInt32(this._DrawingOriginalEditObject.Selection[0].Record.get_Data("ID").ToString()) != this._SelectedManifoldID)
{
Utility.setSelection(this._MapControl, this._DrawingOriginalEditObject, this._SelectedManifoldID);
}
if (this._SelectedEditManifoldID > 0)
{
Manifold.Interop.Point objPointScreen = e.pArgs.LocationScreen;
objPointScreen.Y += this._YCoordMapClickOffset;
objPointScreen = this._MapControl.ScreenToNative(objPointScreen);
moveEditPointCoordinate(objPointScreen.X, objPointScreen.Y);
}
if (this._DrawingOriginalEditObject.Selection.Count < 1 || Convert.ToInt32(this._DrawingOriginalEditObject.Selection[0].Record.get_Data("ID").ToString()) != this._SelectedManifoldID)
{
Utility.setSelection(this._MapControl, this._DrawingOriginalEditObject, this._SelectedManifoldID);
}
}
//Move Geom
if (EditModeOperation == MODETYPE_OPERATION.EditMoveGeom && this._MouseIsClickedDown == true)
{
if (this._DrawingOriginalEditObject.Selection.Count < 1 || Convert.ToInt32(this._DrawingOriginalEditObject.Selection[0].Record.get_Data("ID").ToString()) != this._SelectedManifoldID)
{
Utility.setSelection(this._MapControl, this._DrawingOriginalEditObject, this._SelectedManifoldID);
}
if (this._SelectedEditManifoldID > 0)
{
Manifold.Interop.Point objPointScreen = e.pArgs.LocationScreen;
objPointScreen.Y += this._YCoordMapClickOffset;
objPointScreen = this._MapControl.ScreenToNative(objPointScreen);
moveEditPointCoordinate(objPointScreen.X, objPointScreen.Y);
}
if (this._DrawingOriginalEditObject.Selection.Count < 1 || Convert.ToInt32(this._DrawingOriginalEditObject.Selection[0].Record.get_Data("ID").ToString()) != this._SelectedManifoldID)
{
Utility.setSelection(this._MapControl, this._DrawingOriginalEditObject, this._SelectedManifoldID);
}
}
}
catch (Exception objEx)
{
throw;
}
}
private void MapControl_MouseDownEvent(object sender, AxManifold.Interop.IComponentControlEvents_MouseDownEvent e)
{
try
{
if (Utility.isModeTypeEditEnabled(EditModeOperation) == true)
{
this._DrawingEdit.SelectNone();
if (this._DrawingOriginalEditObject.Selection.Count < 1 || Convert.ToInt32(this._DrawingOriginalEditObject.Selection[0].Record.get_Data("ID").ToString()) != this._SelectedManifoldID)
{
Utility.setSelection(this._MapControl, this._DrawingOriginalEditObject, this._SelectedManifoldID);
}
if (this._DrawingEdit.Selection.Count < 1)
{
//Save the Edit object GEOM string before any EDITING is performed on it.
this._SelectedManifoldObjectOriginalGEOM = this._DrawingOriginalEditObject.Selection[0].get_Geom().ToTextWKT();
//SET SELECTION
Manifold.Interop.Point objPointScreen = e.pArgs.LocationScreen;
objPointScreen.Y += this._YCoordMapClickOffset;
objPointScreen = this._MapControl.ScreenToNative(objPointScreen);
switch (EditModeOperation)
{
case MODETYPE_OPERATION.EditDeleteCoordinate:
this._MouseIsClickedDown = true;
deleteCoordinate(objPointScreen);
break;
case MODETYPE_OPERATION.EditAddCoordinate:
this._MouseIsClickedDown = true;
if (this._AddingCoordinate == false)
{
addCoordinate(objPointScreen);
}
break;
case MODETYPE_OPERATION.EditModeEnabled:
Utility.setNearestSelection(this._MapControl, this._DrawingEdit, objPointScreen, _SelectionTolerance);
if (this._DrawingEdit.Selection.Count > 0)
{
//Record selected Point object
this._MouseIsClickedDown = true;
this._SelectedEditManifoldID = Convert.ToInt32(this._DrawingEdit.Selection[0].Record.get_Data("ID").ToString());
this._SelectedPointBranchIndex = Convert.ToInt32(this._DrawingEdit.Selection[0].Record.get_Data("BranchIndex").ToString());
this._SelectedPointIndex = Convert.ToInt32(this._DrawingEdit.Selection[0].Record.get_Data("PointIndex").ToString());
}
else
{
this._SelectedEditManifoldID = -1;
}
break;
case MODETYPE_OPERATION.EditMoveGeom:
Utility.setNearestSelection(this._MapControl, this._DrawingEdit, objPointScreen, _SelectionTolerance);
if (this._DrawingEdit.Selection.Count > 0)
{
this._GeomMovedDetails = new GeomMovedDetails();
this._UserMovedGeom = false;
//Record selected Point object
this._MouseIsClickedDown = true;
this._SelectedEditManifoldID = Convert.ToInt32(this._DrawingEdit.Selection[0].Record.get_Data("ID").ToString());
this._SelectedEditManifoldPointStart = e.pArgs.LocationNative;
}
else
{
this._SelectedEditManifoldID = -1;
}
break;
default:
this._MouseIsClickedDown = false;
break;
}
}
}
}
catch (Exception objEx)
{
throw;
}
}
public static void unsetSelection(AxManifold.Interop.AxComponentControl p_MapControl, Manifold.Interop.Drawing p_Drawing)
{
try
{
string sSQL = string.Format(@"UPDATE [{0}] SET [Selection (I)] = False ", p_Drawing.Name);
executeSQL(sSQL);
p_MapControl.Refresh();
}
catch (Exception objEx)
{
throw;
}
}
public static void setSelection(AxManifold.Interop.AxComponentControl p_MapControl, Manifold.Interop.Drawing p_Drawing, Manifold.Interop.Point p_ptClickedLocation, double p_dblSelectionTolerance)
{
Manifold.Interop.Query tempQuery = p_MapControl.get_Document().NewQuery("TempQuery", false);
try
{
//Clear any Previous selection
unsetSelection(p_MapControl, p_Drawing);
StringBuilder sbSQL = new StringBuilder();
#region Method1
//Set current selection
//sbSQL.AppendLine(@"UPDATE [" + p_Drawing.Name + "] SET [Selection (I)] = True WHERE [ID] IN (");
//sbSQL.AppendLine(@" SELECT tblDistance.[ID] FROM [" + p_Drawing.Name + "] tblDistance WHERE ");
//sbSQL.AppendLine(@" DISTANCE(GEOM([ID]),AssignCoordSys(CGeom(CGeomWKB(""POINT (" + p_ptClickedLocation.X.ToString() + " " + p_ptClickedLocation.Y.ToString() + @")"")), CoordSys(""" + p_Drawing.Name + @""" AS COMPONENT))) = ");
//sbSQL.AppendLine(@" (");
//sbSQL.AppendLine(@" SELECT min (DISTANCE(GEOM([ID]),AssignCoordSys(CGeom(CGeomWKB(""POINT (" + p_ptClickedLocation.X.ToString() + " " + p_ptClickedLocation.Y.ToString() + @")"")), CoordSys(""" + p_Drawing.Name + @""" AS COMPONENT))))");
//sbSQL.AppendLine(@" FROM [" + p_Drawing.Name + "] tblDistance");
//sbSQL.AppendLine(@" WHERE DISTANCE(GEOM([ID]),AssignCoordSys(CGeom(CGeomWKB(""POINT (" + p_ptClickedLocation.X.ToString() + " " + p_ptClickedLocation.Y.ToString() + @")"")), CoordSys(""" + p_Drawing.Name + @""" AS COMPONENT))) < " + p_dblSelectionTolerance);
//sbSQL.AppendLine(@" ))");
#endregion
#region Method2
//string wkt = String.Format("POINT ({0} {1})", p_ptClickedLocation.X.ToString(), p_ptClickedLocation.Y.ToString());
//string sql = String.Format(@"UPDATE [{0}] SET [Selection (I)] = True " +
// @"WHERE TOUCHES([ID],BUFFER(AssignCoordSys(CGeom(CGeomWKB(""{1}"")), CoordSys(""{0}"" AS COMPONENT)),{2}))",
// p_Drawing.Name, wkt, p_dblSelectionTolerance);
#endregion
//Create selection Rectangle around clicked Point
Manifold.Interop.PointSet points = p_MapControl.Application.NewPointSet();
points.Add(p_MapControl.Application.NewPoint(p_ptClickedLocation.X - p_dblSelectionTolerance, p_ptClickedLocation.Y - p_dblSelectionTolerance));
points.Add(p_MapControl.Application.NewPoint(p_ptClickedLocation.X + p_dblSelectionTolerance, p_ptClickedLocation.Y - p_dblSelectionTolerance));
points.Add(p_MapControl.Application.NewPoint(p_ptClickedLocation.X + p_dblSelectionTolerance, p_ptClickedLocation.Y + p_dblSelectionTolerance));
points.Add(p_MapControl.Application.NewPoint(p_ptClickedLocation.X - p_dblSelectionTolerance, p_ptClickedLocation.Y + p_dblSelectionTolerance));
points.Add(VBManifoldWrapper.ManifoldObjectWrapper.getPointFromPointSet(points, 0));
//Create the geom to get WKT string to use in search
Manifold.Interop.Geom geom = p_MapControl.Application.NewGeom(Manifold.Interop.GeomType.GeomArea, null);
Manifold.Interop.BranchSet geomBranchSet = geom.get_BranchSet();
VBManifoldWrapper.ManifoldObjectWrapper.setPointSetInBranchSet(points, geomBranchSet);
string wkt = geom.ToTextWKT();
sbSQL.Length = 0;
sbSQL.AppendLine(@"UPDATE [" + p_Drawing.Name + "] SET [Selection (I)] = True ");
sbSQL.AppendLine("WHERE Touches(AssignCoordSys(CGeom(CGeomWKB(\"" + wkt + "\")), CoordSys(\"" + p_Drawing.Name + "\" AS COMPONENT)), [ID])");
tempQuery.Text = sbSQL.ToString();
tempQuery.Run();
p_MapControl.Refresh();
}
catch (Exception objEx)
{
throw;
}
finally
{
p_MapControl.get_Document().ComponentSet.Remove(tempQuery);
}
}
public static void setSelection(AxManifold.Interop.AxComponentControl p_MapControl, Manifold.Interop.Drawing p_Drawing, Int32 p_iManifoldObjectID)
{
try
{
//Clear any Previous selection
unsetSelection(p_MapControl, p_Drawing);
//Set selection
string sSQL = String.Format(@"UPDATE [{0}] SET [Selection (I)] = True WHERE [ID]= {1}", p_Drawing.Name, p_iManifoldObjectID.ToString());
//Manifold.Interop.Query tempQuery = p_MapControl.get_Document().NewQuery("TempQuery", false);
//p_MapControl.get_Document().ComponentSet.Remove(tempQuery);
executeSQL(sSQL);
p_MapControl.Refresh();
}
catch (Exception objEx)
{
throw;
}
}
public static void setNearestSelection(AxManifold.Interop.AxComponentControl p_MapControl, Manifold.Interop.Drawing p_Drawing, Manifold.Interop.Point p_ptClickedLocation, double p_dblSelectionTolerance)
{
try
{
executeSQL(getSQL_SetNearestSelection(p_Drawing, p_ptClickedLocation, p_dblSelectionTolerance));
}
catch (Exception objEx)
{
throw;
}
}
public static Manifold.Interop.Map loadManifoldMap(AxManifold.Interop.AxComponentControl p_axManifoldMap, string p_sMapPath, string p_sMapName)
{
Manifold.Interop.Map objReturn = null;
bool bMapExists = false;
try
{
p_axManifoldMap.set_Document(p_sMapPath);
Manifold.Interop.ComponentSet m_ComponentSet = p_axManifoldMap.get_Document().ComponentSet;
//Disaply _Map_Inspection if exists
foreach (Manifold.Interop.Component objComponent in m_ComponentSet)
{
switch (objComponent.Type)
{
case Manifold.Interop.ComponentType.ComponentMap:
if (p_sMapName.Equals(objComponent.Name))
{
//Get Map Name
objReturn = (Manifold.Interop.Map)objComponent;
p_axManifoldMap.ComponentName = objComponent.Name;
bMapExists = true;
break;
}
break;
default:
break;
}
}
//Create new Map if required
if (bMapExists == false)
{
Manifold.Interop.ComponentSet objNewComponentSet = p_axManifoldMap.get_Document().NewComponentSet();
foreach (Manifold.Interop.Component objComponent in m_ComponentSet)
{
switch (objComponent.Type)
{
case Manifold.Interop.ComponentType.ComponentDrawing:
objNewComponentSet.Add(objComponent);
break;
case Manifold.Interop.ComponentType.ComponentTable:
break;
default:
break;
}
}
//objReturn = p_axManifoldMap.get_Document().NewMap(p_sMapName, objNewComponentSet, p_axManifoldMap.Application.DefaultCoordinateSystem, true);
objReturn = p_axManifoldMap.get_Document().NewMap(p_sMapName, objNewComponentSet, p_axManifoldMap.Application.Application.NewCoordinateSystem("Irish Grid"), true);
p_axManifoldMap.ComponentName = p_sMapName;
p_axManifoldMap.ZoomToFit();
}
}
catch (Exception objEx)
{
throw;
}
return objReturn;
}
