|
public VirtualToPhysical ( |
||
| eptp | ||
| aCR3 | ||
| Addr | long | |
| return | ||
/// <summary>
///
/// </summary>
/// <param name="Start"></param>
/// <param name="Stop">We just truncate VA's at 48 bit's</param>
/// <returns>count of new detections since last Run</returns>
public long Run(long Start = 0, long Stop = 0xFFFFffffFFFF)
{
DetectedFragments = new ConcurrentDictionary <long, VAScanType>();
// convert index to an address
// then add start to it
long i = Start;
var block = new long[0x200]; // 0x200 * 8 = 4k
while (i < Stop)
{
foreach (var scanner in CheckMethods)
{
HARDWARE_ADDRESS_ENTRY locPhys = HARDWARE_ADDRESS_ENTRY.MinAddr;
if (DPContext.vmcs != null)
{
//locPhys = MemoryBank[j].VirtualToPhysical(DPContext.vmcs.EPTP, DPContext.CR3Value, i);
locPhys = BackingBlocks.VirtualToPhysical(DPContext.vmcs.EPTP, DPContext.CR3Value, i);
}
else
{
//locPhys = MemoryBank[j].VirtualToPhysical(DPContext.CR3Value, i);
locPhys = BackingBlocks.VirtualToPhysical(DPContext.CR3Value, i);
}
var Curr = i;
i += 0x1000;
if (HARDWARE_ADDRESS_ENTRY.IsBadEntry(locPhys))
{
continue;
}
bool GotData = false;
BackingBlocks.GetPageForPhysAddr(locPhys, ref block, ref GotData, false);
if (!GotData)
{
continue;
}
var scan_detect = scanner(Curr, block);
if (scan_detect != VAScanType.UNDETERMINED)
{
DetectedFragments.TryAdd(Curr, scan_detect);
if (Vtero.VerboseOutput)
{
Console.WriteLine($"Detected PE @ VA {Curr:X}");
}
}
}
}
return(DetectedFragments.Count());
}
public override long Seek(long offset, SeekOrigin origin)
{
HARDWARE_ADDRESS_ENTRY PhysAddr = HARDWARE_ADDRESS_ENTRY.MaxAddr;
long DestAddr = long.MaxValue;
switch (origin)
{
default:
case SeekOrigin.Begin:
DestAddr = offset;
break;
case SeekOrigin.End:
DestAddr = Length - offset;
break;
case SeekOrigin.Current:
DestAddr = position;
DestAddr += offset;
break;
}
PhysAddr = MemBlockStorage.VirtualToPhysical(Proc.vmcs.EPTP, Proc.CR3Value, DestAddr);
if (PhysAddr == HARDWARE_ADDRESS_ENTRY.MinAddr || PhysAddr == HARDWARE_ADDRESS_ENTRY.MaxAddr || PhysAddr == HARDWARE_ADDRESS_ENTRY.MaxAddr - 1)
{
throw new PageNotFoundException($"unable to locate the physical page for the supplied virtual address {DestAddr}", PhysAddr, null, null);
}
position = DestAddr;
CurrPage = PhysAddr;
return(DestAddr);
}
/// <summary>
/// An Inline extraction for the page table hierarchy.
/// Why not let the compiler do it? I have code clones here?
///
/// I guess so, but we can see/deal with the subtle differences at each level here as we implement them.
/// e.g. some levels have LargePage bits and we may also lay over other CPU modes here like 32 in 64 etc..
/// </summary>
/// <param name="top"></param>
/// <param name="Level"></param>
/// <returns></returns>
long InlineExtract(PFN top, int Level)
{
if (Level == 0)
{
return(0);
}
var entries = 0L;
var VA = new VIRTUAL_ADDRESS(top.VA);
//WriteLine($"4: Scanning {top.PageTable:X16}");
var hPA = HARDWARE_ADDRESS_ENTRY.MinAddr;
var SLAT = top.SLAT;
var CR3 = top.PageTable;
// pull level 4 entries attach level 3
foreach (var top_sub in top.SubTables)
{
// scan each page for the level 4 entry
var PTE = top_sub.Value.PTE;
// we don't need to | in the PML4 AO (address offset) since were pulling down the whole page not just the one value
// and were going to brute force our way through the entire table so this was just confusing things.
var l3HW_Addr = PTE.NextTableAddress; // | top_sub.Key.PML4;
// if we have an EPTP use it and request resolution of the HW_Addr
if (SLAT != 0)
{
var hl3HW_Addr = HARDWARE_ADDRESS_ENTRY.MaxAddr;
try { hl3HW_Addr = mem.VirtualToPhysical(SLAT, l3HW_Addr); } catch (Exception) { if (Vtero.DiagOutput)
{
WriteLine($"level3: Failed lookup {l3HW_Addr:X16}");
}
}
l3HW_Addr = hl3HW_Addr;
}
if (SLAT != 0 && (l3HW_Addr == long.MaxValue || l3HW_Addr == long.MaxValue - 1))
{
continue;
}
// copy VA since were going to be making changes
var s3va = new VIRTUAL_ADDRESS(top_sub.Key.Address);
//WriteLine($"3: Scanning {s3va.Address:X16}");
top_sub.Value.hostPTE = l3HW_Addr; // cache translated value
var lvl3_page = new long[512];
// extract the l3 page for each PTEEntry we had in l4
try { mem.GetPageForPhysAddr(l3HW_Addr, ref lvl3_page); } catch (Exception) { if (Vtero.DiagOutput)
{
WriteLine($"level3: Failed lookup {l3HW_Addr:X16}");
}
}
if (lvl3_page == null)
{
continue;
}
for (uint i3 = 0; i3 < 512; i3++)
{
if (lvl3_page[i3] == 0)
{
continue;
}
var l3PTE = new HARDWARE_ADDRESS_ENTRY(lvl3_page[i3]);
// adjust VA to match extracted page entries
s3va.DirectoryPointerOffset = i3;
// save 'PFN' entry into sub-table I should really revisit all these names
var l3PFN = new PFN(l3PTE, s3va.Address, CR3, SLAT);
top_sub.Value.SubTables.Add(s3va, l3PFN);
entries++;
/// TODO: Double check if this is a real bit...
/// I added it to help weed out some failure cases
if (!l3PTE.LargePage)
{
// get the page that the current l3PFN describes
var l2HW_Addr = l3PTE.NextTableAddress;
if (SLAT != 0)
{
var hl2HW_Addr = HARDWARE_ADDRESS_ENTRY.MaxAddr;
try { hl2HW_Addr = mem.VirtualToPhysical(SLAT, l2HW_Addr); } catch (Exception ex) { if (Vtero.DiagOutput)
{
WriteLine($"level2: Unable to V2P {l3PTE}");
}
}
l2HW_Addr = hl2HW_Addr;
}
// TODO: more error handling of exceptions & bad returns
// TODO: support software PTE types
if (l2HW_Addr == HARDWARE_ADDRESS_ENTRY.MaxAddr)
{
continue;
}
l3PFN.hostPTE = l2HW_Addr;
var lvl2_page = new long[512];
try { mem.GetPageForPhysAddr(l2HW_Addr, ref lvl2_page); } catch (Exception ex) { if (Vtero.DiagOutput)
{
WriteLine($"level2: Failed lookup {l2HW_Addr:X16}");
}
}
if (lvl2_page == null)
{
continue;
}
// copy VA
var s2va = new VIRTUAL_ADDRESS(s3va.Address);
//WriteLine($"2: Scanning {s2va.Address:X16}");
// extract PTE's for each set entry
for (uint i2 = 0; i2 < 512; i2++)
{
if (lvl2_page[i2] == 0)
{
continue;
}
var l2PTE = new HARDWARE_ADDRESS_ENTRY(lvl2_page[i2]);
s2va.DirectoryOffset = i2;
var l2PFN = new PFN(l2PTE, s2va.Address, CR3, SLAT)
{
Type = PFNType.Data
};
l3PFN.SubTables.Add(s2va, l2PFN);
entries++;
if (!l2PTE.LargePage)
{
var l1HW_Addr = l2PTE.NextTableAddress;
if (SLAT != 0)
{
var hl1HW_Addr = HARDWARE_ADDRESS_ENTRY.MaxAddr;
try { hl1HW_Addr = mem.VirtualToPhysical(SLAT, l1HW_Addr); } catch (Exception ex) { if (Vtero.DiagOutput)
{
WriteLine($"level1: Unable to V2P {l2PTE}");
}
}
l1HW_Addr = hl1HW_Addr;
}
if (l1HW_Addr == HARDWARE_ADDRESS_ENTRY.MaxAddr)
{
continue;
}
l2PFN.hostPTE = l1HW_Addr;
var lvl1_page = new long[512];
try { mem.GetPageForPhysAddr(l1HW_Addr, ref lvl1_page); } catch (Exception ex) { if (Vtero.DiagOutput)
{
WriteLine($"level1: Failed lookup {l1HW_Addr:X16}");
}
}
if (lvl1_page == null)
{
continue;
}
var s1va = new VIRTUAL_ADDRESS(s2va.Address);
//WriteLine($"1: Scanning {s1va.Address:X16}");
for (uint i1 = 0; i1 < 512; i1++)
{
if (lvl1_page[i1] == 0)
{
continue;
}
var l1PTE = new HARDWARE_ADDRESS_ENTRY(lvl1_page[i1]);
s1va.TableOffset = i1;
var l1PFN = new PFN(l1PTE, s1va.Address, CR3, SLAT)
{
Type = PFNType.Data
};
l2PFN.SubTables.Add(s1va, l1PFN);
entries++;
}
}
}
}
}
}
//top.PFNCount += entries;
return(entries);
}
