public DCurve3 ToCurve()
{
DCurve3 curve = MeshUtil.ExtractLoopV(Mesh, Vertices);
curve.Closed = true;
return(curve);
}
/// <summary>
/// Resample curve so that:
/// - if opening angle at vertex is > sharp_thresh, we emit two more vertices at +/- corner_t, where the t is used in prev/next lerps
/// - if opening angle is > flat_thresh, we skip the vertex entirely (simplification)
/// This is mainly useful to get nicer polylines to use as the basis for (eg) creating 3D tubes, rendering, etc
///
/// [TODO] skip tiny segments?
/// </summary>
public DCurve3 ResampleSharpTurns(double sharp_thresh = 90, double flat_thresh = 189, double corner_t = 0.01)
{
int NV = vertices.Count;
DCurve3 resampled = new DCurve3()
{
Closed = this.Closed
};
double prev_t = 1.0 - corner_t;
for (int k = 0; k < NV; ++k)
{
double open_angle = Math.Abs(OpeningAngleDeg(k));
if (open_angle > flat_thresh && k > 0)
{
// ignore skip this vertex
}
else if (open_angle > sharp_thresh)
{
resampled.AppendVertex(vertices[k]);
}
else
{
Vector3d n = vertices[(k + 1) % NV];
Vector3d p = vertices[k == 0 ? NV - 1 : k - 1];
resampled.AppendVertex(Vector3d.Lerp(p, vertices[k], prev_t));
resampled.AppendVertex(vertices[k]);
resampled.AppendVertex(Vector3d.Lerp(vertices[k], n, corner_t));
}
}
return(resampled);
}
public TubeGenerator(DCurve3 tubePath, Polygon2d tubeShape)
{
Vertices = new List <Vector3d>(tubePath.Vertices);
Polygon = new Polygon2d(tubeShape);
ClosedLoop = tubePath.Closed;
Capped = !ClosedLoop;
}
public InPlaceIterativeCurveSmooth(DCurve3 curve, float alpha = 0.25f)
{
Curve = curve;
Start = 0;
End = Curve.VertexCount;
Alpha = alpha;
}
public ImplicitCurve3d(DCurve3 curve, double radius)
{
Curve = curve;
Radius = radius;
Box = curve.GetBoundingBox();
Box.Expand(Radius);
spatial = new DCurve3BoxTree(curve);
}
/// <summary>
/// Creates g3.DCurve from Vector3[]
/// </summary>
/// <param name="curve">DCurve</param>
/// <param name="verteces">Vextor3[]</param>
/// <param name="bClosed">whether the line is closed</param>
public static void Vector3(this g3.DCurve3 curve, Vector3[] verteces, bool bClosed)
{
curve.ClearVertices();
curve.Closed = bClosed;
foreach (Vector3 vertex in verteces)
{
curve.AppendVertex(vertex);
}
}
public DCurve3BoxTree(DCurve3 curve)
{
if (curve.Closed == false)
{
throw new NotImplementedException("not done yet");
}
Curve = curve;
build_sequential(curve);
}
public void Make(DCurve3 c)
{
int nV = vertices.Count;
for (int i = 0; i < nV; ++i)
{
c.AppendVertex(vertices[i]);
}
c.Closed = closed;
}
public static DCurve3 ExtractLoopV(IMesh mesh, IEnumerable <int> vertices)
{
DCurve3 curve = new DCurve3();
foreach (int vid in vertices)
{
curve.AppendVertex(mesh.GetVertex(vid));
}
curve.Closed = true;
return(curve);
}
public static void Store(DCurve3 curve, BinaryWriter writer)
{
writer.Write(curve.Closed);
writer.Write(curve.VertexCount);
for (int i = 0; i < curve.VertexCount; ++i)
{
writer.Write(curve[i].x);
writer.Write(curve[i].y);
writer.Write(curve[i].z);
}
}
public static void PreserveBoundaryLoops(MeshConstraints cons, DMesh3 mesh)
{
MeshBoundaryLoops loops = new MeshBoundaryLoops(mesh);
foreach (EdgeLoop loop in loops)
{
DCurve3 loopC = MeshUtil.ExtractLoopV(mesh, loop.Vertices);
DCurveProjectionTarget target = new DCurveProjectionTarget(loopC);
ConstrainVtxLoopTo(cons, mesh, loop.Vertices, target);
}
}
public DCurve3 ToCurve(DMesh3 sourceMesh = null)
{
if (sourceMesh == null)
{
sourceMesh = Mesh;
}
DCurve3 curve = MeshUtil.ExtractLoopV(sourceMesh, Vertices);
curve.Closed = false;
return(curve);
}
public static DCurve3 ExtractLoopV(IMesh mesh, int[] vertices)
{
DCurve3 curve = new DCurve3();
for (int i = 0; i < vertices.Length; ++i)
{
curve.AppendVertex(mesh.GetVertex(vertices[i]));
}
curve.Closed = true;
return(curve);
}
public static void Restore(DCurve3 curve, BinaryReader reader)
{
curve.Closed = reader.ReadBoolean();
int count = reader.ReadInt32();
for (int i = 0; i < count; ++i)
{
double x = reader.ReadDouble();
double y = reader.ReadDouble();
double z = reader.ReadDouble();
curve.AppendVertex(new Vector3d(x, y, z));
}
}
public MeshTrimLoop(DMesh3 mesh, DCurve3 trimline, Vector3d vSeedPt, DMeshAABBTree3 spatial = null)
{
if (spatial != null && spatial.Mesh == mesh)
{
throw new ArgumentException("MeshTrimLoop: input spatial DS must have its own copy of mesh");
}
Mesh = mesh;
TrimLine = new DCurve3(trimline);
if (spatial != null)
{
Spatial = spatial;
}
seed_pt = vSeedPt;
}
public MeshFacesFromLoop(DMesh3 Mesh, DCurve3 SpaceCurve, ISpatial Spatial, int tSeed)
{
this.Mesh = Mesh;
int N = SpaceCurve.VertexCount;
InitialLoopT = new int[N];
for (int i = 0; i < N; ++i)
{
InitialLoopT[i] = Spatial.FindNearestTriangle(SpaceCurve[i]);
}
find_path();
find_interior_from_seed(tSeed);
}
/// <summary>
/// Decompose graph into simple polylines and polygons.
/// </summary>
public static Curves ExtractCurves(DGraph3 graph)
{
Curves c = new Curves();
c.Loops = new List <DCurve3>();
c.Paths = new List <DCurve3>();
HashSet <int> used = new HashSet <int>();
// find boundary and junction vertices
HashSet <int> boundaries = new HashSet <int>();
HashSet <int> junctions = new HashSet <int>();
foreach (int vid in graph.VertexIndices())
{
if (graph.IsBoundaryVertex(vid))
{
boundaries.Add(vid);
}
if (graph.IsJunctionVertex(vid))
{
junctions.Add(vid);
}
}
// walk paths from boundary vertices
foreach (int start_vid in boundaries)
{
int vid = start_vid;
int eid = graph.GetVtxEdges(vid)[0];
if (used.Contains(eid))
{
continue;
}
DCurve3 path = new DCurve3()
{
Closed = false
};
path.AppendVertex(graph.GetVertex(vid));
while (true)
{
used.Add(eid);
Index2i next = NextEdgeAndVtx(eid, vid, graph);
eid = next.a;
vid = next.b;
path.AppendVertex(graph.GetVertex(vid));
if (boundaries.Contains(vid) || junctions.Contains(vid))
{
break; // done!
}
}
c.Paths.Add(path);
}
// ok we should be done w/ boundary verts now...
boundaries.Clear();
foreach (int start_vid in junctions)
{
foreach (int outgoing_eid in graph.VtxEdgesItr(start_vid))
{
if (used.Contains(outgoing_eid))
{
continue;
}
int vid = start_vid;
int eid = outgoing_eid;
DCurve3 path = new DCurve3()
{
Closed = false
};
path.AppendVertex(graph.GetVertex(vid));
while (true)
{
used.Add(eid);
Index2i next = NextEdgeAndVtx(eid, vid, graph);
eid = next.a;
vid = next.b;
path.AppendVertex(graph.GetVertex(vid));
if (eid == int.MaxValue || junctions.Contains(vid))
{
break; // done!
}
}
// we could end up back at our start junction vertex!
if (vid == start_vid)
{
path.RemoveVertex(path.VertexCount - 1);
path.Closed = true;
c.Loops.Add(path);
// need to mark incoming edge as used...but is it valid now?
//Util.gDevAssert(eid != int.MaxValue);
if (eid != int.MaxValue)
{
used.Add(eid);
}
}
else
{
c.Paths.Add(path);
}
}
}
// all that should be left are continuous loops...
foreach (int start_eid in graph.EdgeIndices())
{
if (used.Contains(start_eid))
{
continue;
}
int eid = start_eid;
Index2i ev = graph.GetEdgeV(eid);
int vid = ev.a;
DCurve3 poly = new DCurve3()
{
Closed = true
};
poly.AppendVertex(graph.GetVertex(vid));
while (true)
{
used.Add(eid);
Index2i next = NextEdgeAndVtx(eid, vid, graph);
eid = next.a;
vid = next.b;
poly.AppendVertex(graph.GetVertex(vid));
if (eid == int.MaxValue || junctions.Contains(vid))
{
throw new Exception("how did this happen??");
}
if (used.Contains(eid))
{
break;
}
}
poly.RemoveVertex(poly.VertexCount - 1);
c.Loops.Add(poly);
}
return(c);
}
/// <summary>
/// Decompose graph into simple polylines and polygons.
/// </summary>
public static Curves ExtractCurves(DGraph3 graph,
bool bWantLoopIndices = false,
Func <int, bool> CurveOrientationF = null)
{
var c = new Curves();
c.Loops = new List <DCurve3>();
c.Paths = new List <DCurve3>();
if (bWantLoopIndices)
{
c.LoopEdges = new List <List <int> >();
c.PathEdges = new List <List <int> >();
}
var used = new HashSet <int>();
// find boundary and junction vertices
var boundaries = new HashSet <int>();
var junctions = new HashSet <int>();
foreach (int vid in graph.VertexIndices())
{
if (graph.IsBoundaryVertex(vid))
{
boundaries.Add(vid);
}
if (graph.IsJunctionVertex(vid))
{
junctions.Add(vid);
}
}
// walk paths from boundary vertices
foreach (int start_vid in boundaries)
{
int vid = start_vid;
int eid = graph.GetVtxEdges(vid)[0];
if (used.Contains(eid))
{
continue;
}
bool reverse = (CurveOrientationF != null) ? CurveOrientationF(eid) : false;
var path = new DCurve3()
{
Closed = false
};
List <int> pathE = (bWantLoopIndices) ? new List <int>() : null;
path.AppendVertex(graph.GetVertex(vid));
if (pathE != null)
{
pathE.Add(eid);
}
while (true)
{
used.Add(eid);
Index2i next = NextEdgeAndVtx(eid, vid, graph);
eid = next.a;
vid = next.b;
path.AppendVertex(graph.GetVertex(vid));
if (boundaries.Contains(vid) || junctions.Contains(vid))
{
break; // done!
}
if (pathE != null)
{
pathE.Add(eid);
}
}
if (reverse)
{
path.Reverse();
}
c.Paths.Add(path);
if (pathE != null)
{
Util.gDevAssert(pathE.Count == path.VertexCount - 1);
if (reverse)
{
pathE.Reverse();
}
c.PathEdges.Add(pathE);
}
}
// ok we should be done w/ boundary verts now...
//boundaries.Clear();
c.BoundaryV = boundaries;
foreach (int start_vid in junctions)
{
foreach (int outgoing_eid in graph.VtxEdgesItr(start_vid))
{
if (used.Contains(outgoing_eid))
{
continue;
}
int vid = start_vid;
int eid = outgoing_eid;
bool reverse = (CurveOrientationF != null) ? CurveOrientationF(eid) : false;
var path = new DCurve3()
{
Closed = false
};
List <int> pathE = (bWantLoopIndices) ? new List <int>() : null;
path.AppendVertex(graph.GetVertex(vid));
if (pathE != null)
{
pathE.Add(eid);
}
while (true)
{
used.Add(eid);
Index2i next = NextEdgeAndVtx(eid, vid, graph);
eid = next.a;
vid = next.b;
path.AppendVertex(graph.GetVertex(vid));
if (eid == int.MaxValue || junctions.Contains(vid))
{
break; // done!
}
if (pathE != null)
{
pathE.Add(eid);
}
}
// we could end up back at our start junction vertex!
if (vid == start_vid)
{
path.RemoveVertex(path.VertexCount - 1);
path.Closed = true;
if (reverse)
{
path.Reverse();
}
c.Loops.Add(path);
if (pathE != null)
{
Util.gDevAssert(pathE.Count == path.VertexCount);
if (reverse)
{
pathE.Reverse();
}
c.LoopEdges.Add(pathE);
}
// need to mark incoming edge as used...but is it valid now?
//Util.gDevAssert(eid != int.MaxValue);
if (eid != int.MaxValue)
{
used.Add(eid);
}
}
else
{
if (reverse)
{
path.Reverse();
}
c.Paths.Add(path);
if (pathE != null)
{
Util.gDevAssert(pathE.Count == path.VertexCount - 1);
if (reverse)
{
pathE.Reverse();
}
c.PathEdges.Add(pathE);
}
}
}
}
c.JunctionV = junctions;
// all that should be left are continuous loops...
foreach (int start_eid in graph.EdgeIndices())
{
if (used.Contains(start_eid))
{
continue;
}
int eid = start_eid;
Index2i ev = graph.GetEdgeV(eid);
int vid = ev.a;
bool reverse = (CurveOrientationF != null) ? CurveOrientationF(eid) : false;
var poly = new DCurve3()
{
Closed = true
};
List <int> polyE = (bWantLoopIndices) ? new List <int>() : null;
poly.AppendVertex(graph.GetVertex(vid));
if (polyE != null)
{
polyE.Add(eid);
}
while (true)
{
used.Add(eid);
Index2i next = NextEdgeAndVtx(eid, vid, graph);
eid = next.a;
vid = next.b;
poly.AppendVertex(graph.GetVertex(vid));
if (polyE != null)
{
polyE.Add(eid);
}
if (eid == int.MaxValue || junctions.Contains(vid))
{
throw new Exception("how did this happen??");
}
if (used.Contains(eid))
{
break;
}
}
poly.RemoveVertex(poly.VertexCount - 1);
if (reverse)
{
poly.Reverse();
}
c.Loops.Add(poly);
if (polyE != null)
{
polyE.RemoveAt(polyE.Count - 1);
Util.gDevAssert(polyE.Count == poly.VertexCount);
if (reverse)
{
polyE.Reverse();
}
c.LoopEdges.Add(polyE);
}
}
return(c);
}
// build tree of boxes as sequential array
void build_sequential(DCurve3 curve)
{
int NV = curve.VertexCount;
int N = NV;
int boxCount = 0;
layers = 0;
layer_counts = new List <int>();
// count how many boxes in each layer, building up from initial segments
int bi = 0;
while (N > 1)
{
int layer_boxes = (N / 2) + (N % 2 == 0 ? 0 : 1);
boxCount += layer_boxes;
N = layer_boxes;
layer_counts.Add(layer_boxes);
bi += layer_boxes;
layers++;
}
boxes = new Box3d[boxCount];
bi = 0;
// make first layer
for (int si = 0; si < NV; si += 2)
{
Vector3d v1 = curve[(si + 1) % NV];
Segment3d seg1 = new Segment3d(curve[si], v1);
Box3d box = new Box3d(seg1);
if (si < NV - 1)
{
Segment3d seg2 = new Segment3d(v1, curve[(si + 2) % NV]);
Box3d box2 = new Box3d(seg2);
box = Box3d.Merge(ref box, ref box2);
}
boxes[bi++] = box;
}
// repeatedly build layers until we hit a single box
N = bi;
int prev_layer_start = 0;
bool done = false;
while (done == false)
{
int layer_start = bi;
for (int k = 0; k < N; k += 2)
{
Box3d mbox = Box3d.Merge(ref boxes[prev_layer_start + k], ref boxes[prev_layer_start + k + 1]);
boxes[bi++] = mbox;
}
N = (N / 2) + (N % 2 == 0 ? 0 : 1);
prev_layer_start = layer_start;
if (N == 1)
{
done = true;
}
}
}
public DCurveProjectionTarget(DCurve3 curve)
{
this.Curve = curve;
}
public void Close_Flat()
{
double minlen, maxlen, avglen;
MeshQueries.EdgeLengthStats(Mesh, out minlen, out maxlen, out avglen, 1000);
double target_edge_len = (TargetEdgeLen <= 0) ? avglen : TargetEdgeLen;
// massage around boundary loop
List <int> refinedBorderEdges;
cleanup_boundary(Mesh, InitialBorderLoop, avglen, out refinedBorderEdges, 3);
// find new border loop. try to find new loop containing edges from loop we refined in cleanup_boundary,
// if that fails just use largest loop.
MeshBoundaryLoops loops = new MeshBoundaryLoops(Mesh);
int iloop = loops.FindLoopContainingEdge(refinedBorderEdges[0]);
if (iloop == -1)
{
iloop = loops.MaxVerticesLoopIndex;
}
EdgeLoop fill_loop = loops.Loops[iloop];
int extrude_group = (ExtrudeGroup == -1) ? Mesh.AllocateTriangleGroup() : ExtrudeGroup;
int fill_group = (FillGroup == -1) ? Mesh.AllocateTriangleGroup() : FillGroup;
// decide on projection plane
//AxisAlignedBox3d loopbox = fill_loop.GetBounds();
//Vector3d topPt = loopbox.Center;
//if ( bIsUpper ) {
// topPt.y = loopbox.Max.y + 0.25 * dims.y;
//} else {
// topPt.y = loopbox.Min.y - 0.25 * dims.y;
//}
//Frame3f plane = new Frame3f((Vector3f)topPt);
// extrude loop to this plane
MeshExtrudeLoop extrude = new MeshExtrudeLoop(Mesh, fill_loop);
extrude.PositionF = (v, n, i) => {
return(FlatClosePlane.ProjectToPlane((Vector3f)v, 1));
};
extrude.Extrude(extrude_group);
MeshValidation.IsBoundaryLoop(Mesh, extrude.NewLoop);
Debug.Assert(Mesh.CheckValidity());
// smooth the extrude loop
MeshLoopSmooth loop_smooth = new MeshLoopSmooth(Mesh, extrude.NewLoop);
loop_smooth.ProjectF = (v, i) => {
return(FlatClosePlane.ProjectToPlane((Vector3f)v, 1));
};
loop_smooth.Alpha = 0.5f;
loop_smooth.Rounds = 100;
loop_smooth.Smooth();
Debug.Assert(Mesh.CheckValidity());
// fill result
SimpleHoleFiller filler = new SimpleHoleFiller(Mesh, extrude.NewLoop);
filler.Fill(fill_group);
Debug.Assert(Mesh.CheckValidity());
// make selection for remesh region
MeshFaceSelection remesh_roi = new MeshFaceSelection(Mesh);
remesh_roi.Select(extrude.NewTriangles);
remesh_roi.Select(filler.NewTriangles);
remesh_roi.ExpandToOneRingNeighbours();
remesh_roi.ExpandToOneRingNeighbours();
remesh_roi.LocalOptimize(true, true);
int[] new_roi = remesh_roi.ToArray();
// get rid of extrude group
FaceGroupUtil.SetGroupToGroup(Mesh, extrude_group, 0);
/* clean up via remesh
* - constrain loop we filled to itself
*/
RegionRemesher r = new RegionRemesher(Mesh, new_roi);
DCurve3 top_curve = MeshUtil.ExtractLoopV(Mesh, extrude.NewLoop.Vertices);
DCurveProjectionTarget curve_target = new DCurveProjectionTarget(top_curve);
int[] top_loop = (int[])extrude.NewLoop.Vertices.Clone();
r.Region.MapVerticesToSubmesh(top_loop);
MeshConstraintUtil.ConstrainVtxLoopTo(r.Constraints, r.Mesh, top_loop, curve_target);
DMeshAABBTree3 spatial = new DMeshAABBTree3(Mesh);
spatial.Build();
MeshProjectionTarget target = new MeshProjectionTarget(Mesh, spatial);
r.SetProjectionTarget(target);
bool bRemesh = true;
if (bRemesh)
{
r.Precompute();
r.EnableFlips = r.EnableSplits = r.EnableCollapses = true;
r.MinEdgeLength = target_edge_len;
r.MaxEdgeLength = 2 * target_edge_len;
r.EnableSmoothing = true;
r.SmoothSpeedT = 1.0f;
for (int k = 0; k < 40; ++k)
{
r.BasicRemeshPass();
}
r.SetProjectionTarget(null);
r.SmoothSpeedT = 0.25f;
for (int k = 0; k < 10; ++k)
{
r.BasicRemeshPass();
}
Debug.Assert(Mesh.CheckValidity());
r.BackPropropagate();
}
// smooth around the join region to clean up ugliness
smooth_region(Mesh, r.Region.BaseBorderV, 3);
}
public DCurveProjection(DCurve3 curve)
{
this.Curve = curve;
}
public DCurve3BoxTree(DCurve3 curve)
{
Curve = curve;
build_sequential(curve);
}
// build tree of boxes as sequential array
void build_sequential(DCurve3 curve)
{
int NV = curve.VertexCount;
int N = (curve.Closed) ? NV : NV - 1;
int boxCount = 0;
layers = 0;
layer_counts = new List <int>();
// count how many boxes in each layer, building up from initial segments
int bi = 0;
while (N > 1)
{
int layer_boxes = (N / 2) + (N % 2 == 0 ? 0 : 1);
boxCount += layer_boxes;
N = layer_boxes;
layer_counts.Add(layer_boxes);
bi += layer_boxes;
layers++;
}
// [RMS] this case happens if N = 1, previous loop is skipped and we have to
// hardcode initialization to this redundant box
if (layers == 0)
{
layers = 1;
boxCount = 1;
layer_counts = new List <int>()
{
1
};
}
boxes = new Box3d[boxCount];
bi = 0;
// make first layer
int NStop = (curve.Closed) ? NV : NV - 1;
for (int si = 0; si < NStop; si += 2)
{
Vector3d v1 = curve[(si + 1) % NV];
var seg1 = new Segment3d(curve[si], v1);
var box = new Box3d(seg1);
if (si < NV - 1)
{
var seg2 = new Segment3d(v1, curve[(si + 2) % NV]);
var box2 = new Box3d(seg2);
box = Box3d.Merge(ref box, ref box2);
}
boxes[bi++] = box;
}
// repeatedly build layers until we hit a single box
N = bi;
if (N == 1)
{
return;
}
int prev_layer_start = 0;
bool done = false;
while (done == false)
{
int layer_start = bi;
for (int k = 0; k < N; k += 2)
{
var mbox = Box3d.Merge(ref boxes[prev_layer_start + k], ref boxes[prev_layer_start + k + 1]);
boxes[bi++] = mbox;
}
N = (N / 2) + (N % 2 == 0 ? 0 : 1);
prev_layer_start = layer_start;
if (N == 1)
{
done = true;
}
}
}
public DCurve3(DCurve3 copy)
{
vertices = new List <Vector3d>(copy.vertices);
Closed = copy.Closed;
Timestamp = 0;
}
public LaplacianCurveDeformer(DCurve3 curve)
{
Curve = curve;
}
