public static bool CheckInCirlce(double x, double y, Circle c)
{
double kc = Math.Sqrt((x - c.GetX()) * (x - c.GetX()) + (y - c.GetY()) * (y - c.GetY()));
if (kc < c.GetRadius())
{ return true; }
return false;
}
private List<Circle> circleChildrens; //các đường tròn con trong 1 đường tròn cha
public Circle(int _handle)
{
this.handle = _handle;
this.x = Lcad.PropGetFloat(handle, Lcad.LC_PROP_CIRCLE_X);
this.y = Lcad.PropGetFloat(handle, Lcad.LC_PROP_CIRCLE_Y);
this.radius = Lcad.PropGetFloat(handle, Lcad.LC_PROP_CIRCLE_RAD);
this.circleChildrens = new List<Circle>();
this.circleParent = null;
}
//delete Circle Children
public void RemoveCircleChildren(Circle _circleChildren)
{
circleChildrens.Remove(_circleChildren);
}
//add Circle Children
public void AddCirleChildren(Circle _circleChidren)
{
circleChildrens.Add(_circleChidren);
}
//set Circle Parent
public void SetCircleParent(Circle _circlePrent)
{
this.circleParent = _circlePrent;
}
private void VeKhoangCach(Circle c1, Circle c2)
{
int hBlockModel = Lcad.PropGetHandle(hDrw, Lcad.LC_PROP_DRW_BLOCK_MODEL);
Lcad.DrwAddTextStyle(hDrw, "Arial", "Arial");
Lcad.PropPutStr(hDrw, Lcad.LC_PROP_DRW_TEXTSTYLE, "Arial");
int newText = 0, newLine = 0;
newText = Lcad.BlockAddTextWin2(hBlockModel, this.banVeChinh.DeltaX.ToString(), ((c1.GetX() + c2.GetX()) / 2), ((c1.GetY() + c2.GetY()) / 2), Lcad.LC_TA_CENTER, 0.75, 1, 0, 0);
newLine = Lcad.BlockAddLine(hBlockModel, c1.GetX(), c1.GetY(), c2.GetX(), c2.GetY());
Lcad.PropPutStr(newText, Lcad.LC_PROP_ENT_LAYER, "LuoiKichThuoc");
Lcad.PropPutStr(newLine, Lcad.LC_PROP_ENT_LAYER, "LuoiKichThuoc");
}
private void MouseDblClkProc_XayDungLuoiLoMin(int hWnd, int Button, int Flags, int Xwin, int Ywin, double Xdrw, double Ydrw)
{
int hBlockModel = Lcad.PropGetHandle(hDrw, Lcad.LC_PROP_DRW_BLOCK_MODEL);
if (mgCircles == null)
{
mgCircles = new ManageCircle();
}
else
{
Lcad.LayerClear(layerLoMin, hBlockModel);
Lcad.LayerClear(layerLuoiKichThuoc, hBlockModel);
mgCircles = new ManageCircle();
}
int hEntCircle = Lcad.BlockAddCircle(hBlockModel, Xdrw, Ydrw, banKinh, false);
Lcad.PropPutInt(hEntCircle, Lcad.LC_PROP_ENT_KEY, keyCircle);
Lcad.PropPutStr(hEntCircle, Lcad.LC_PROP_ENT_LAYER, "LoMin");
Lcad.BlockUnselect(hBlockModel);
//tạo danh sách cột đầu tiên
List<Circle> listCotDau = new List<Circle>();
Circle root = new Circle(hEntCircle);
listCotDau.Add(root);
//tạo cột đầu tiên từ điểm gốc (số điểm trong cột ứng với số hàng trừ đi điểm gốc)
for (int i = 0; i < soHang - 1; i++)
{
int newHEnt = Lcad.BlockAddClone(hBlockModel, listCotDau[i].GetHandle());
Lcad.PropPutInt(newHEnt, Lcad.LC_PROP_ENT_KEY, keyCircle);
Lcad.BlockSelectEnt(hBlockModel, newHEnt, true);
Lcad.BlockSelMove(hBlockModel, 0, khoangCachHang, false, true);
Lcad.BlockUnselect(hBlockModel);
listCotDau.Add(new Circle(newHEnt));
}
mgCircles.AddListCircle(listCotDau);
//thêm các cột còn lại (ứng với số cột trừ đi cột đầu)
for (int i = 0; i < soCot - 1; i++)
{
List<Circle> listCotGanNhat = new List<Circle>();
List<Circle> listCotMoi = new List<Circle>();
if (khoangCachCot > 0)
{
listCotGanNhat = mgCircles.GetListCirleOfLastColumn();
}
else
{
listCotGanNhat = mgCircles.GetListCirleOfFirstColumn();
}
foreach (var circle in listCotGanNhat)
{
int newHEnt = Lcad.BlockAddClone(hBlockModel, circle.GetHandle());
Lcad.PropPutInt(newHEnt, Lcad.LC_PROP_ENT_KEY, keyCircle);
Lcad.BlockSelectEnt(hBlockModel, newHEnt, true);
Lcad.BlockSelMove(hBlockModel, khoangCachCot, 0, false, true);
Lcad.BlockUnselect(hBlockModel);
listCotMoi.Add(new Circle(newHEnt));
}
mgCircles.AddListCircle(listCotMoi);
}
//hiển thị lưới kích thước
if (this.banVeChinh.HienKhoangCach)
{
DungLuoiKichThuoc();
}
//load lại
//MessageBox.Show("hang" + soHang + "\ncot" + soCot + "\nkc hang" + khoangCachHang + "\nkc cot" + khoangCachCot + "\nX" + Xdrw + "\nY" + Ydrw);
Lcad.DrwRegenViews(hDrw, 0);
Lcad.WndExeCommand(hWnd, Lcad.LC_CMD_ZOOM_EXT, 0);
Lcad.OnEventMouseDblClk(_EventMouseDbclick_LoMin);
LuuHoChieu(this.hoChieuChinh.MaHoChieu); //ăn gian...
BS_LiteCAD.ShowNotifyAutoHide(elementHost1, "Xây dựng lưới lỗ khoan - hoàn thành");
}
//vẽ kíp nối giữa 2 lỗ khoan cùng 1 cột
private void DrawLine_Y(Circle c1, Circle c2)
{
//ve
int hBlockModel = Lcad.PropGetHandle(hDrw, Lcad.LC_PROP_DRW_BLOCK_MODEL);
int newLine = 0;
newLine = Lcad.BlockAddLine(hBlockModel, c1.GetX(), c1.GetY(), c2.GetX(), c2.GetY());
Lcad.PropPutStr(newLine, Lcad.LC_PROP_ENT_LAYER, "KipNo");
}
//vẽ kíp nối giữa 2 lỗ khoan cùng 1 hàng
private void DrawLine_X(Circle c1, Circle c2)
{
int gocNghieng = 15;
double canhHuyen = banVeChinh.DeltaX * 30 / 100;
double x1, y1, x2, y2, c; //toa do 2 diem gap khuc
double a, b;
//tinh toan
b = Math.Sin(gocNghieng * (Math.PI / 180)) * canhHuyen;
a = Math.Sqrt((canhHuyen * canhHuyen) - (b * b));
//c = banVeChinh.DeltaX - (b * 2); //sua moi cai dong nay thoi @@
c = Math.Abs(c1.GetX() - c2.GetX()) - (b * 2);
if (c1.GetX() > c2.GetX())
{
x1 = c1.GetX() - b;
}
else
{
x1 = c1.GetX() + b;
}
y1 = c1.GetY() + a;
if (c1.GetX() > c2.GetX())
{
x2 = x1 - c;
}
else
{
x2 = x1 + c;
}
y2 = y1;
//ve
int hBlockModel = Lcad.PropGetHandle(hDrw, Lcad.LC_PROP_DRW_BLOCK_MODEL);
int newLine1 = 0, newLine2 = 0, newLine3 = 0;
newLine1 = Lcad.BlockAddLine(hBlockModel, c1.GetX(), c1.GetY(), x1, y1);
newLine2 = Lcad.BlockAddLine(hBlockModel, x1, y1, x2, y2);
newLine3 = Lcad.BlockAddLine(hBlockModel, x2, y2, c2.GetX(), c2.GetY());
Lcad.PropPutStr(newLine1, Lcad.LC_PROP_ENT_LAYER, "KipNo");
Lcad.PropPutStr(newLine2, Lcad.LC_PROP_ENT_LAYER, "KipNo");
Lcad.PropPutStr(newLine3, Lcad.LC_PROP_ENT_LAYER, "KipNo");
}
//cập nhật ds lỗ khoan theo bản vẽ
private void UpdateCircleFromAutocad()
{
int hBlockModel = Lcad.PropGetHandle(hDrw, Lcad.LC_PROP_DRW_BLOCK_MODEL);
List<Circle> listCircles = mgCircles.GetListCircles();
foreach(Circle c in listCircles)
{
int hEnt = Lcad.BlockGetFirstEnt(hBlockModel);
while (hEnt != 0)
{
int entID = Lcad.PropGetInt(hEnt, Lcad.LC_PROP_ENT_ID);
int entType = Lcad.PropGetInt(hEnt, Lcad.LC_PROP_ENT_TYPE);
if (!Lcad.PropGetBool(hEnt, Lcad.LC_PROP_ENT_DELETED)) //kiểm tra xem ent bị xóa hay không
{
if ((entType == Lcad.LC_ENT_CIRCLE) && (entID == c.GetID()))
{
Circle newCircle = new Circle(hEnt);
c.SetX(newCircle.GetX());
c.SetY(newCircle.GetY());
break;
}
}
hEnt = Lcad.BlockGetNextEnt(hBlockModel, hEnt);
}
}
}
private void MouseDblClkProc_XayDungLuoiLoMin(int hWnd, int Button, int Flags, int Xwin, int Ywin, double Xdrw, double Ydrw)
{
if (mgCircles == null)
{
mgCircles = new ManageCircle();
}
int hModelBlock = Lcad.PropGetHandle(hDrw, Lcad.LC_PROP_DRW_BLOCK_MODEL);
double r = 0.5;
int hEntCircle = Lcad.BlockAddCircle(hModelBlock, Xdrw, Ydrw, r, false);
Lcad.BlockUnselect(hModelBlock);
// Add a column of new Circles
List<Circle> listCotDau = new List<Circle>();
Circle root = new Circle(hEntCircle);
listCotDau.Add(root);
//Them hang
//khoangCachHang = khoangCachHang * -1;
for (int i = 0; i < soHang - 1; i++)
{
int newHEnt = Lcad.BlockAddClone(hModelBlock, listCotDau[i].GetHandle());
Lcad.BlockSelectEnt(hModelBlock, newHEnt, true);
Lcad.BlockSelMove(hModelBlock, 0, khoangCachHang, false, true);
Lcad.BlockUnselect(hModelBlock);
listCotDau.Add(new Circle(newHEnt));
}
mgCircles.AddListCircle(listCotDau);
//Them cot
for (int i = 0; i < soCot - 1; i++)
{
List<Circle> listCotGanNhat = new List<Circle>();
List<Circle> listCotMoi = new List<Circle>();
if (khoangCachCot > 0)
{
listCotGanNhat = mgCircles.GetListCirleOfLastColumn();
}
else
{
listCotGanNhat = mgCircles.GetListCirleOfFirstColumn();
}
foreach (var circle in listCotGanNhat)
{
int newHEnt = Lcad.BlockAddClone(hModelBlock, circle.GetHandle());
Lcad.BlockSelectEnt(hModelBlock, newHEnt, true);
Lcad.BlockSelMove(hModelBlock, khoangCachCot, 0, false, true);
Lcad.BlockUnselect(hModelBlock);
listCotMoi.Add(new Circle(newHEnt));
}
mgCircles.AddListCircle(listCotMoi);
}
MessageBox.Show("hang" + soHang + "\ncot" + soCot + "\nkc hang" + khoangCachHang + "\nkc cot" + khoangCachCot + "\nX" + Xdrw + "\nY" + Ydrw);
Lcad.DrwRegenViews(hDrw, 0);
Lcad.WndExeCommand(hWnd, Lcad.LC_CMD_ZOOM_EXT, 0);
Lcad.OnEventMouseDblClk(_EventMouseDbclick_LoMin);
}
public LoKhoan(String maHoChieu, Circle c)
{
this.iD = null;
this.maHoChieu = maHoChieu;
this.maBanVe = BS_HoChieu.HoChieu(maHoChieu).MaBanVe;
this.maMayKhoan = null;
this.maLoKhoan = c.GetID().ToString();
this.banKinh = c.GetRadius();
this.chieuSau = 0;
this.huongKhoan = null;
this.toaDoX = c.GetX();
this.toaDoY = c.GetY();
this.lt = 0;
this.lkk = 0;
this.l0 = 0;
this.lbua = 0;
}
