Esempio n. 1
0
        public Form_Modify(MainForm f)
        {
            this.f = f;
            InitializeComponent();

            languageFile      = new IniFiles(Application.StartupPath + "\\LanguagePack" + f.package);
            this.Text         = languageFile.ReadString("MODIFYFORM", "TITLE", "权限限制");
            this.label1.Text  = languageFile.ReadString("MODIFYFORM", "PASSWORD", "密码:");
            this.button1.Text = languageFile.ReadString("MODIFYFORM", "OK", "确认");
            this.button2.Text = languageFile.ReadString("MODIFYFORM", "CANCEL", "取消");

            if (f.Chinese_English == 1)
            {
                System.Threading.Thread.CurrentThread.CurrentUICulture = new System.Globalization.CultureInfo("en-US");
                ApplyResource();
            }
            else if (f.Chinese_English == 0)
            {
                System.Threading.Thread.CurrentThread.CurrentUICulture = new System.Globalization.CultureInfo("zh-CHS");
                ApplyResource();
            }
            else
            {
                System.Threading.Thread.CurrentThread.CurrentUICulture = new System.Globalization.CultureInfo("zh-CHT");
                ApplyResource();
            }
        }
Esempio n. 2
0
        //private uint addr;
        public Form_Addr(MainForm f)
        {
            InitializeComponent();
            this.f = f;

            settingFile  = new IniFiles(Application.StartupPath + "\\setting.ini");
            languageFile = new IniFiles(Application.StartupPath + "\\LanguagePack" + f.package);
            //numericUpDown1.Value = f.address[f.address_backup];

            System.Threading.Thread.CurrentThread.CurrentUICulture = new System.Globalization.CultureInfo("zh-CHS");
            ApplyResource();

            this.Text         = languageFile.ReadString("SERIAL", "TITLE", "拼接设置");
            this.label2.Text  = languageFile.ReadString("SERIAL", "TIPS", "提示:在进行设备的序列号进行设置时,请确保串口线环接在断开状态;序列号设置只能单台设备进行设置!");
            this.label1.Text  = languageFile.ReadString("SERIAL", "T1", "设备序列号设置:");
            this.button1.Text = languageFile.ReadString("SERIAL", "OK", "确认");
            this.button2.Text = languageFile.ReadString("SERIAL", "CANCEL", "取消");

            /*
             * if (f.Chinese_English == 1)
             * {
             *  System.Threading.Thread.CurrentThread.CurrentUICulture = new System.Globalization.CultureInfo("en-US");
             *  ApplyResource();
             * }
             * else
             * {
             *  System.Threading.Thread.CurrentThread.CurrentUICulture = new System.Globalization.CultureInfo("zh-CHS");
             *  ApplyResource();
             * }
             */
            textBox1.Text = f.address[f.address_backup].ToString();
        }
Esempio n. 3
0
 private void Init(byte A)
 {
     //for (int i = 0; i < 256; i++)
     {
         //if (f.select_address[i] != 0)
         {
             byte[] array = new byte[5];
             array[0] = 0xE5;
             array[1] = (byte)num;//f.select_address[i];
             array[2] = 0x20;
             array[3] = A;
             array[4] = (byte)(0xFF - (0xFF & array[0] + array[1] + array[2] + array[3]));
             try
             {
                 if (serialPort1.IsOpen)
                 {
                     SerialPortUtil.serialPortSendData(serialPort1, array, 0, 5, 100, 2);
                     f.richTextBox2.AppendText(MainForm.ToHexString(array, 5));
                     f.richTextBox2.SelectionStart = f.richTextBox2.Text.Length;
                     f.richTextBox2.ScrollToCaret();
                 }
             }
             catch
             {
                 string ts = languageFile.ReadString("MESSAGEBOX", "M1", "串口出错!");
                 string tp = languageFile.ReadString("MESSAGEBOX", "TP", "提示");
                 MessageBox.Show(ts, tp);
             }
         }
     }
 }
Esempio n. 4
0
        private void button1_Click(object sender, EventArgs e)
        {
            int n = L.Count;

            if (n <= 0)
            {
                string ts = languageFile.ReadString("AUTOFORM", "T1", "没有可轮巡的场景预案!");
                string tp = languageFile.ReadString("MESSAGEBOX", "TP", "提示");
                MessageBox.Show(ts, tp);
                return;
            }
            int t = int.Parse(textBox1.Text);

            if (t < 30 || t > 86400)
            {
                string ts = languageFile.ReadString("AUTOFORM", "T2", "请填写正确的间隔时间(30/s ~ 24/h)!");
                string tp = languageFile.ReadString("MESSAGEBOX", "TP", "提示");
                MessageBox.Show(ts, tp);
                textBox1.Text = "30";
                return;
            }
            L.Sort();          //对选中的场景排序
            b = f.Select_bt(); //获取当前在那个场景中
            Form_WaitRun f1 = new Form_WaitRun(f, L, t, b);

            f1.ShowDialog();
            LogHelper.WriteLog("======开始自动进行场景轮巡======");
        }
        //private Thread myThread = null;
        //private int num_k = 1;
        //private int receiveFlag = -1;//参数接受的标志,0表示完成,1表示接受COLOR_BALANCE:部分,2表示COLOR_DATA:,3表示CAPTURE DATA:
        //AutoSizeFormClass asc = new AutoSizeFormClass();
        public Form_Color_59(MainForm f, bool mf)
        {
            InitializeComponent();
            this.f               = f;
            this.flag            = mf;
            serialPort1.PortName = f.PortName;
            serialPort1.BaudRate = f.BaudRate;
            //Console.WriteLine("====="+flag);

            languageFile = new IniFiles(Application.StartupPath + "\\LanguagePack" + f.package);
            try
            {
                serialPort1.Open();
                port_flag = true;
            }
            catch
            {
                serialPort1.Close();
                string ts = languageFile.ReadString("MESSAGEBOX", "M1", "串口出错!");
                string tp = languageFile.ReadString("MESSAGEBOX", "TP", "提示");
                MessageBox.Show(ts, tp);
                port_flag = false;
            }
            Init_FormString();

            if (f.Chinese_English == 1)
            {
                System.Threading.Thread.CurrentThread.CurrentUICulture = new System.Globalization.CultureInfo("en-US");
                ApplyResource();
            }
            else if (f.Chinese_English == 0)
            {
                System.Threading.Thread.CurrentThread.CurrentUICulture = new System.Globalization.CultureInfo("zh-CHS");
                ApplyResource();
            }
            else
            {
                System.Threading.Thread.CurrentThread.CurrentUICulture = new System.Globalization.CultureInfo("zh-CHT");
                ApplyResource();
            }

            for (int i = 0; i < 128; i++)
            {
                if (f.select_address[i] != 0)
                {
                    //comboBox1.Text = f.select_address[i].ToString();
                    comboBox1.Items.Add(f.select_address[i]);
                }
            }
            comboBox1.SelectedIndex = 0;
            if (!flag)
            {
                label26.Visible   = false;
                comboBox1.Visible = false;
            }
            Init_Data1();
            //Thread.Sleep(100);
            //Init_Data2();
        }
Esempio n. 6
0
        private void Form_TipsText_Load(object sender, EventArgs e)
        {
            var    cct = new ColorConverter();
            string s   = settingFile.ReadString("SUBSET", "TEXTNAME", "");

            //Console.WriteLine("=======" + s);
            if (s.Contains("*"))
            {
                s = s.Replace("*", "\n");
            }
            richTextBox1.Text = s;
            string s_name = settingFile.ReadString("SUBSET", "FONTNAME", f.Name);
            string s_size = settingFile.ReadString("SUBSET", "FONTSIZE", f.Size.ToString());

            slider1.Value = settingFile.ReadInteger("SUBSET", "MOVETANS", 100);
            colorDropDownList1.SelectedIndex = settingFile.ReadInteger("SUBSET", "FONTC", 0);
            f = new Font(s_name, float.Parse(s_size));
            //f = (Font)fc.ConvertFromString(s);
            //Console.WriteLine("=======" + s);
            //s = settingFile.ReadString("SUBSET", "FONTCOLOR", (c.ToArgb().ToString("X8")));
            //Console.WriteLine("=======" + s);
            //c = (Color)cct.ConvertFromString("#" + s);
            c  = colorDropDownList1.SelectColor;
            s  = settingFile.ReadString("SUBSET", "BCCOLOR", (bc.ToArgb().ToString("X8")));
            bc = ColorTranslator.FromHtml("#" + s);
            //Console.WriteLine("=======");
            int k = settingFile.ReadInteger("SUBSET", "MOVETIME", spd);

            numericUpDown1.Value = (decimal)k;
            k = settingFile.ReadInteger("SUBSET", "MOVESPEED", speed);
            numericUpDown2.Value = (decimal)k;

            if (!System.IO.Directory.Exists(filePath))
            {
                // 目录不存在,建立目录
                System.IO.Directory.CreateDirectory(filePath);
            }
            string s1 = settingFile.ReadString("SETTING", "PictureLogo", "");

            if (!s1.Equals(""))
            {
                s1 = s1.Substring(s1.Length - 4, 4);
                s1 = Application.StartupPath + @"\pic\logoshow" + s1;
                pictureBox1.Image = null;
                pictureBox1.Image = Image.FromFile(s1);
            }

            myThread = new Thread(new ThreadStart(delegate()
            {
                WeatherThread();
            })); //开线程
            myThread.IsBackground = true;
            myThread.Start();
            //timer1.Start();
            //Console.WriteLine("==1111==");
        }
 /// <summary>
 /// 语言设置加载
 /// </summary>
 private void Init_FormString()
 {
     this.Text          = languageFile.ReadString("UARTRFORM", "TITLE", "遥控");
     this.label10.Text  = languageFile.ReadString("UARTRFORM", "P", "电源");
     this.label3.Text   = languageFile.ReadString("UARTRFORM", "M", "静音");
     this.label4.Text   = languageFile.ReadString("UARTRFORM", "MENU", "菜单");
     this.label11.Text  = languageFile.ReadString("UARTRFORM", "S", "信源");
     this.label14.Text  = languageFile.ReadString("UARTRFORM", "ID", "ID 设定");
     this.label15.Text  = languageFile.ReadString("UARTRFORM", "E", "退出");
     this.button22.Text = languageFile.ReadString("UARTRFORM", "OK", "OK");
 }
        public Form_Scename(MainForm f, int k)
        {
            InitializeComponent();
            this.key     = "S" + k.ToString();
            settingFile  = new IniFiles(Application.StartupPath + "\\setting.ini");
            languageFile = new IniFiles(Application.StartupPath + "\\LanguagePack" + f.package);

            if (f.Chinese_English == 1)
            {
                System.Threading.Thread.CurrentThread.CurrentUICulture = new System.Globalization.CultureInfo("en-US");
                ApplyResource();
            }
            else if (f.Chinese_English == 0)
            {
                System.Threading.Thread.CurrentThread.CurrentUICulture = new System.Globalization.CultureInfo("zh-CHS");
                ApplyResource();
            }
            else
            {
                System.Threading.Thread.CurrentThread.CurrentUICulture = new System.Globalization.CultureInfo("zh-CHT");
                ApplyResource();
            }

            textBox1.Text = settingFile.ReadString("SCENE", key, "Scene - " + k.ToString());
        }
Esempio n. 9
0
        private void Init(byte A)
        {
            for (int i = 0; i < 128; i++)
            {
                if (f.select_address[i] != 0)
                {
                    byte[] array = new byte[5];
                    array[0] = 0xE5;
                    array[1] = f.select_address[i];
                    array[2] = 0x20;
                    array[3] = A;
                    array[4] = (byte)(0xFF - (0xFF & array[0] + array[1] + array[2] + array[3]));
                    try
                    {
                        if (f.Rs232Con)
                        {
                            if (f.TCPCOM)
                            {
                                f.TcpSendMessage(array, 0, 5);
                            }
                            else
                            {
                                SerialPortUtil.serialPortSendData(f.serialPort1, array, 0, 5, 100, 2);
                            }
                            f.richTextBox2.AppendText(MainForm.ToHexString(array, 5));
                            f.richTextBox2.SelectionStart = f.richTextBox2.Text.Length;
                            f.richTextBox2.ScrollToCaret();
                        }

                        /*
                         * this.BeginInvoke(new MethodInvoker(delegate()
                         * {
                         *  f.richTextBox2.AppendText(MainForm.ToHexString(array, 5));
                         * }));
                         */
                    }
                    catch
                    {
                        string ts = languageFile.ReadString("MESSAGEBOX", "M1", "串口出错!");
                        string tp = languageFile.ReadString("MESSAGEBOX", "TP", "提示");
                        MessageBox.Show(ts, tp);
                    }
                }
            }
        }
Esempio n. 10
0
        /// <summary>
        /// 语言设置加载
        /// </summary>
        private void Init_FormString()
        {
            string sl = languageFile.ReadString("WALLSETFORM", "MATRIX", "矩阵");

            if (sl.Contains("\0"))
            {
                sl = sl.Replace("\0", "");
            }
            this.Text = sl + languageFile.ReadString("WALLSETFORM", "COMMAP", "端口映射");

            this.tabPage1.Text = sl + "HDMI";
            this.tabPage2.Text = sl + "DVI";
            this.tabPage3.Text = sl + "VIDEO";
            this.tabPage4.Text = sl + "VGA";

            this.button1.Text = languageFile.ReadString("WALLSETFORM", "OK", "确认");
            this.button1.Text = languageFile.ReadString("WALLSETFORM", "CLOSE", "关闭");
        }
Esempio n. 11
0
        public Form_Tips(MainForm f, bool b)
        {
            InitializeComponent();
            this.f       = f;
            languageFile = new IniFiles(Application.StartupPath + "\\LanguagePack" + f.package);
            //Init_FormString();
            this.label1.Text  = languageFile.ReadString("TIPSFORM", "TIPS", "定时开关机提示:");
            this.button1.Text = languageFile.ReadString("TIPSFORM", "OK", "确认");
            this.button2.Text = languageFile.ReadString("TIPSFORM", "CANCEL", "取消");
            if (b)
            {
                label1.Text = languageFile.ReadString("TIPSFORM", "TIPS1", "定时开机提示:");
            }
            else
            {
                label1.Text = languageFile.ReadString("TIPSFORM", "TIPS2", "定时关机提示:");
            }

            /*
             * if (f.Chinese_English)
             * {
             *  System.Threading.Thread.CurrentThread.CurrentUICulture = new System.Globalization.CultureInfo("en-US");
             *  ApplyResource();
             *  if (b)
             *      label1.Text = "Regular boot tips:";
             *  else
             *      label1.Text = "Timed shutdown tips:";
             * }
             * else
             * {
             *  System.Threading.Thread.CurrentThread.CurrentUICulture = new System.Globalization.CultureInfo("zh-CHS");
             *  ApplyResource();
             *  if (b)
             *      label1.Text = "定时开机提示:";
             *  else
             *      label1.Text = "定时关机提示:";
             *
             * }
             */
            t               = 30;//提示倒计时
            label2.Text     = "30";
            timer1.Interval = 1000;
            timer1.Start();
        }
Esempio n. 12
0
 /// <summary>
 /// 语言设置加载
 /// </summary>
 private void Init_FormString()
 {
     this.subTextToolStripMenuItem.Text  = languageFile.ReadString("TEXTFORM", "FONTSET", "字幕字体设置");
     this.subColorToolStripMenuItem.Text = languageFile.ReadString("TEXTFORM", "BACKCOLOR", "背景颜色设置");
     this.subTanstoolStripMenuItem1.Text = languageFile.ReadString("TEXTFORM", "TRANSPARENCY", "背景透明度");
     this.RighttoolStripMenuItem1.Text   = languageFile.ReadString("TEXTFORM", "TL", "向右滚动");
     this.LefttoolStripMenuItem2.Text    = languageFile.ReadString("TEXTFORM", "TR", "向左滚动");
     this.subStopToolStripMenuItem.Text  = languageFile.ReadString("TEXTFORM", "ST", "停止滚动");
     this.subStartToolStripMenuItem.Text = languageFile.ReadString("TEXTFORM", "SR", "开始滚动");
     this.subCloseToolStripMenuItem.Text = languageFile.ReadString("TEXTFORM", "CT", "关闭字幕");
 }
Esempio n. 13
0
        //AutoSizeFormClass asc = new AutoSizeFormClass();
        public Form_about(MainForm f)
        {
            InitializeComponent();
            System.Threading.Thread.CurrentThread.CurrentUICulture = new System.Globalization.CultureInfo("zh-CHS");
            ApplyResource();
            languageFile      = new IniFiles(Application.StartupPath + "\\LanguagePack" + f.package);
            this.Text         = languageFile.ReadString("ABOUTFORM", "TITLE", "关于软件");
            this.label1.Text  = languageFile.ReadString("ABOUTFORM", "T1", "拼接控制系统");
            this.label2.Text  = languageFile.ReadString("ABOUTFORM", "T2", "版本 : V 3.0.5");
            this.label3.Text  = languageFile.ReadString("ABOUTFORM", "T3", "LCD splicing control system");
            this.button1.Text = languageFile.ReadString("ABOUTFORM", "T_OK", "确认");

            if (f.Chinese_English == 1)
            {
                System.Threading.Thread.CurrentThread.CurrentUICulture = new System.Globalization.CultureInfo("en-US");
                ApplyResource();
            }
            else if (f.Chinese_English == 0)
            {
                System.Threading.Thread.CurrentThread.CurrentUICulture = new System.Globalization.CultureInfo("zh-CHS");
                ApplyResource();
            }
            else
            {
                System.Threading.Thread.CurrentThread.CurrentUICulture = new System.Globalization.CultureInfo("zh-CHT");
                ApplyResource();
            }
            this.label2.Text = languageFile.ReadString("ABOUTFORM", "T2", "版本 : V 3.0.5");
        }
Esempio n. 14
0
        public Form_Edit(MainForm f, string str, string text)
        {
            InitializeComponent();
            this.f   = f;
            this.str = str;
            this.t   = text;


            languageFile      = new IniFiles(Application.StartupPath + "\\LanguagePack" + f.package);
            this.Text         = languageFile.ReadString("EDITFORM", "TITLE", "信号通道编辑");
            this.label1.Text  = languageFile.ReadString("EDITFORM", "EI", "编辑输入:");
            this.button1.Text = languageFile.ReadString("EDITFORM", "OK", "确认");
            this.button2.Text = languageFile.ReadString("EDITFORM", "CANCEL ", "取消");

            if (f.Chinese_English == 1)
            {
                System.Threading.Thread.CurrentThread.CurrentUICulture = new System.Globalization.CultureInfo("en-US");
                ApplyResource();
            }
            else if (f.Chinese_English == 0)
            {
                System.Threading.Thread.CurrentThread.CurrentUICulture = new System.Globalization.CultureInfo("zh-CHS");
                ApplyResource();
            }
            else
            {
                System.Threading.Thread.CurrentThread.CurrentUICulture = new System.Globalization.CultureInfo("zh-CHT");
                ApplyResource();
            }

            if (t.Contains("("))
            {
                t             = t.Split('(')[1].Split(')')[0];
                textBox1.Text = t;
            }
            else
            {
                textBox1.Text = "";
            }
        }
Esempio n. 15
0
        public Form_Info59(MainForm f, int num)
        {
            this.f   = f;
            this.num = num;
            InitializeComponent();
            serialPort1.PortName = f.PortName;
            serialPort1.BaudRate = f.BaudRate;
            settingFile          = new IniFiles(Application.StartupPath + "\\setting.ini");
            languageFile         = new IniFiles(Application.StartupPath + "\\LanguagePack" + f.package);

            try
            {
                serialPort1.Open();
            }
            catch
            {
                serialPort1.Close();
                string ts = languageFile.ReadString("MESSAGEBOX", "M1", "串口出错!");
                string tp = languageFile.ReadString("MESSAGEBOX", "TP", "提示");
                MessageBox.Show(ts, tp);
                return;
            }
            this.Text           = languageFile.ReadString("INFOFORM", "TITLE", "版本信息");
            this.groupBox1.Text = languageFile.ReadString("INFOFORM", "INFO", "信息");
            this.label2.Text    = languageFile.ReadString("INFOFORM", "SV", "版本信息");
            this.button1.Text   = languageFile.ReadString("INFOFORM", "UD", "更新显示");

            if (f.Chinese_English == 1)
            {
                System.Threading.Thread.CurrentThread.CurrentUICulture = new System.Globalization.CultureInfo("en-US");
                ApplyResource();
            }
            else if (f.Chinese_English == 0)
            {
                System.Threading.Thread.CurrentThread.CurrentUICulture = new System.Globalization.CultureInfo("zh-CHS");
                ApplyResource();
            }
            else
            {
                System.Threading.Thread.CurrentThread.CurrentUICulture = new System.Globalization.CultureInfo("zh-CHT");
                ApplyResource();
            }

            string s1 = settingFile.ReadString("SETTING", "Ver", "");

            if (s1.Length != 0)
            {
                label1.Text = s1;
            }
        }
Esempio n. 16
0
        private void button1_Click(object sender, EventArgs e)
        {
            bool have = false;

            for (int i = 0; i < 128; i++)
            {
                if (f.address[i] == int.Parse(textBox1.Text))
                {
                    if (i == f.address_backup)
                    {
                        break;
                    }
                    have = true;
                    string       ts = languageFile.ReadString("SERIAL", "T2", "此序列号已存在,是否确认覆盖!");
                    string       tp = languageFile.ReadString("MESSAGEBOX", "TP", "提示");
                    DialogResult t  = MessageBox.Show(ts, tp);

                    /*
                     * if (f.Chinese_English == 1)
                     *  t = MessageBox.Show(" This serial number already exists, whether to confirm the coverage!", " Tips", MessageBoxButtons.YesNo, MessageBoxIcon.Exclamation);
                     * else
                     *  t = MessageBox.Show(" 此序列号已存在,是否确认覆盖!", " 提示", MessageBoxButtons.OKCancel, MessageBoxIcon.Exclamation);
                     */
                    if (t == DialogResult.Yes || t == DialogResult.OK)
                    {
                        f.address[i] = 0;
                        f.Address    = int.Parse(textBox1.Text);
                        settingFile.WriteInteger("ADDR", f.address_backup + "Addr:", int.Parse(textBox1.Text));
                    }
                    else
                    {
                        f.Address = f.address[f.address_backup];
                    }
                    break;
                }
            }
            if (!have)
            {
                f.Address = int.Parse(textBox1.Text);
                settingFile.WriteInteger("ADDR", f.address_backup + "Addr:", int.Parse(textBox1.Text));
            }
            //Console.WriteLine(f.Address);
            Save_number(f.Address);
            this.Close();
        }
Esempio n. 17
0
        public Form_Start()
        {
            settingFile = new IniFiles(Application.StartupPath + "\\setting.ini");
            InitializeComponent();

            int s_M = settingFile.ReadInteger("SETTING", "Motherboard", 0);

            if (s_M == 0)
            {
                comboBox1.SelectedIndex = 0;
            }
            else if (s_M == 1)
            {
                comboBox1.SelectedIndex = 1;
            }
            else if (s_M == 4)
            {
                comboBox1.SelectedIndex = 2;
            }
            else if (s_M == 2)
            {
                comboBox1.SelectedIndex = 3;
            }
            else
            {
                comboBox1.SelectedIndex = 4;
            }
            string s2 = settingFile.ReadString("SETTING", "CH-US", "1");

            if (s2.Equals("0"))
            {
                comboBox2.SelectedIndex = 1;
            }
            else if (s2.Equals("1"))
            {
                comboBox2.SelectedIndex = 0;
            }
            else
            {
                comboBox2.SelectedIndex = 2;
            }
        }
Esempio n. 18
0
        private void Form_Logo_Load(object sender, EventArgs e)
        {
            if (!System.IO.Directory.Exists(filePath))
            {
                // 目录不存在,建立目录
                System.IO.Directory.CreateDirectory(filePath);
            }

            string s = settingFile.ReadString("SETTING", "PictureLogo", "");

            //Console.WriteLine("s ====" + s);
            if (!s.Equals(""))
            {
                s = s.Substring(s.Length - 4, 4);
                s = Application.StartupPath + @"\pic\logoshow" + s;
                pictureBox1.Image.Dispose();
                pictureBox1.Load(s);
            }
            //timer1.Enabled = true;
            //timer1.Stop();
            //ShowCursor(0);
        }
Esempio n. 19
0
 /// <summary>
 /// 语言设置加载
 /// </summary>
 private void Init_FormString()
 {
     this.button1.Text = languageFile.ReadString("RUNFORM", "STOP", "停止轮巡");
     this.label1.Text  = languageFile.ReadString("RUNFORM", "TIPS ", "预案场景轮巡期间禁止其他操作!");
     this.label3.Text  = languageFile.ReadString("RUNFORM", "TIME", "轮巡时间(S):");
 }
Esempio n. 20
0
        /// <summary>
        /// 语言设置加载
        /// </summary>
        private void Init_FormString()
        {
            this.Text           = languageFile.ReadString("COLORFORM", "TITLE", "屏幕参数调整");
            this.groupBox1.Text = languageFile.ReadString("COLORFORM", "PARAMRTER", "用户色彩(1~100)");
            this.label3.Text    = languageFile.ReadString("COLORFORM", "SAT", "亮度:");
            this.label1.Text    = languageFile.ReadString("COLORFORM", "BRI", "对比度:");
            this.label2.Text    = languageFile.ReadString("COLORFORM", "CON", "饱和度:");
            this.label21.Text   = languageFile.ReadString("COLORFORM", "BAC", "背光:");
            this.label22.Text   = languageFile.ReadString("COLORFORM", "CLA", "清晰度:");

            this.groupBox1.Text = languageFile.ReadString("COLORFORM", "WHITE", "白平衡");
            this.label6.Text    = languageFile.ReadString("COLORFORM", "R", "红:");
            this.label7.Text    = languageFile.ReadString("COLORFORM", "G", "绿:");
            this.label8.Text    = languageFile.ReadString("COLORFORM", "B", "蓝:");

            this.groupBox1.Text = languageFile.ReadString("COLORFORM", "DARK", "暗平衡");
            this.label9.Text    = languageFile.ReadString("COLORFORM", "B", "蓝:");
            this.label10.Text   = languageFile.ReadString("COLORFORM", "G", "绿:");
            this.label11.Text   = languageFile.ReadString("COLORFORM", "R", "红:");

            this.label26.Text      = languageFile.ReadString("COLORFORM", "UINT", "屏幕单元");
            this.radioButton1.Text = languageFile.ReadString("COLORFORM", "SINGLE", "单个单元");
            this.radioButton2.Text = languageFile.ReadString("COLORFORM", "SPLICE", "拼接单元");
            this.button1.Text      = languageFile.ReadString("COLORFORM", "CLOSE", "关闭");
            this.button2.Text      = languageFile.ReadString("COLORFORM", "REST", "色彩复位");
        }
Esempio n. 21
0
 /// <summary>
 /// 语言设置加载
 /// </summary>
 private void Init_FormString()
 {
     this.Text             = languageFile.ReadString("TEXTFORM", "TITLE", "字幕设置");
     this.label3.Text      = languageFile.ReadString("TEXTFORM", "TEXT_T", "字幕文本");
     this.label6.Text      = languageFile.ReadString("TEXTFORM", "BACKGROUND", "背景/Logo图片");
     this.label5.Text      = languageFile.ReadString("TEXTFORM", "COLOR", "字体显示颜色");
     this.label1.Text      = languageFile.ReadString("TEXTFORM", "INTERVAL", "时间间隔");
     this.label2.Text      = languageFile.ReadString("TEXTFORM", "SPEED", "滚动速度");
     this.label4.Text      = languageFile.ReadString("TEXTFORM", "CITY_TEXT", "城市气象字幕");
     this.button_font.Text = languageFile.ReadString("TEXTFORM", "FONT", "字体设置");
     this.button2.Text     = languageFile.ReadString("TEXTFORM", "BACKCOLOR", "背景颜色设置");
     this.button1.Text     = languageFile.ReadString("TEXTFORM", "SHOW", "应用显示");
     this.button3.Text     = languageFile.ReadString("TEXTFORM", "DISPLAY", "显示天气");
     this.buttonX1.Text    = languageFile.ReadString("TEXTFORM", "PIC_SELECT", "图片选择");
     this.checkBox2.Text   = languageFile.ReadString("TEXTFORM", "CROSS", "鼠标穿透");
     this.checkBox1.Text   = languageFile.ReadString("TEXTFORM", "TRANSPARENCY", "背景透明度");
     this.checkBox3.Text   = languageFile.ReadString("TEXTFORM", "SHOW_PIC", "显示背景图片");
 }
Esempio n. 22
0
        public Form_Log(MainForm f)
        {
            InitializeComponent();
            this.f      = f;
            settingFile = new IniFiles(Application.StartupPath + "\\setting.ini");
            //comboBox1.SelectedIndex = 0;

            languageFile      = new IniFiles(Application.StartupPath + "\\LanguagePack" + f.package);
            this.Text         = languageFile.ReadString("LOGFORM", "TITLE", "权限登录");
            this.label1.Text  = languageFile.ReadString("LOGFORM", "USER", "用户名:");
            this.label2.Text  = languageFile.ReadString("LOGFORM", "PASSWORD", "密码:");
            this.label3.Text  = languageFile.ReadString("LOGFORM", "PPERMISION", "用户权限:");
            this.button1.Text = languageFile.ReadString("LOGFORM", "LOG", "登录");
            this.button2.Text = languageFile.ReadString("LOGFORM", "CLOSE", "关闭");
            this.button3.Text = languageFile.ReadString("LOGFORM", "EXIT", "退出");
            this.button4.Text = languageFile.ReadString("LOGFORM", "CHANGE", "密码修改");
            string sg = languageFile.ReadString("LOGFORM", "USER1", "普通用户");
            string sa = languageFile.ReadString("LOGFORM", "USER2", "管理员用户");

            comboBox1.Items.Clear();
            comboBox1.Items.Add(sg);
            comboBox1.Items.Add(sa);

            string s1 = settingFile.ReadString("SETTING", "Pwd", "0");

            //Console.WriteLine(s1);
            if (s1 == "0")
            {
                button4.Visible         = false;
                button3.Visible         = false;
                button1.Visible         = true;
                button2.Visible         = true;
                comboBox1.SelectedIndex = 0;
            }
            else if (s1 == "1")
            {
                button1.Visible         = false;
                button2.Visible         = false;
                button4.Visible         = true;
                button3.Visible         = true;
                comboBox1.SelectedIndex = 1;
                comboBox1.Enabled       = false;
            }
            else
            {
                button4.Visible         = false;
                button3.Visible         = false;
                button1.Visible         = true;
                button2.Visible         = true;
                comboBox1.SelectedIndex = 0;
            }


            if (f.Chinese_English == 1)
            {
                System.Threading.Thread.CurrentThread.CurrentUICulture = new System.Globalization.CultureInfo("en-US");
                ApplyResource();
            }
            else if (f.Chinese_English == 0)
            {
                System.Threading.Thread.CurrentThread.CurrentUICulture = new System.Globalization.CultureInfo("zh-CHS");
                ApplyResource();
            }
            else
            {
                System.Threading.Thread.CurrentThread.CurrentUICulture = new System.Globalization.CultureInfo("zh-CHT");
                ApplyResource();
            }
        }
Esempio n. 23
0
        private void button1_Click(object sender, EventArgs e)
        {
            if (textBox1.Text == "")
            {
                if (f.Chinese_English == 1)
                {
                    errorProvider1.SetError(textBox1, "Username can not be empty!");
                }
                else
                {
                    errorProvider1.SetError(textBox1, "用户名不能为空!");
                }
                return;
            }
            else
            {
                errorProvider1.Clear();
                str2 = settingFile.ReadString("SETTING", "in", "333");
                if (textBox1.Text == "admin" && str1 == textBox2.Text && comboBox1.SelectedIndex == 0)
                {
                    //this.DialogResult = DialogResult.OK;
                    settingFile.WriteString("SETTING", "Pwd", "0");

                    string ts = languageFile.ReadString("LOGFORM", "T2", "登录成功!");
                    string tp = languageFile.ReadString("MESSAGEBOX", "TP", "提示");
                    MessageBox.Show(ts, tp);
                    this.Close();
                }
                else if (textBox1.Text == "admin" && (str2 == textBox2.Text || "111111" == textBox2.Text) && comboBox1.SelectedIndex == 1)
                {
                    //this.DialogResult = DialogResult.OK;
                    settingFile.WriteString("SETTING", "Pwd", "1");
                    string ts = languageFile.ReadString("LOGFORM", "T2", "登录成功!");
                    string tp = languageFile.ReadString("MESSAGEBOX", "TP", "提示");
                    MessageBox.Show(ts, tp);
                    this.Close();
                }
                else if (textBox1.Text == "welcome" && "******" == textBox2.Text && comboBox1.SelectedIndex == 1)
                {
                    //this.DialogResult = DialogResult.OK;
                    rk = Registry.LocalMachine.OpenSubKey("SOFTWARE", true);//打开系统的注册表项,Registry.LocalMachine包含本地计算机的配置数据。该字段读取 Windows 注册表基项 HKEY_LOCAL_MACHINE,OpenSubKey("SOFTWARE")表示打开本地计算机配置数据下SOFTWARE子项
                    if (rk.GetValue("Wall_C") != null)
                    {
                        rk.SetValue("Count", 0);
                        rk.DeleteValue("Wall_C", true);
                    }
                    settingFile.WriteString("SETTING", "Pwd", "1");
                    string ts = languageFile.ReadString("LOGFORM", "T2", "登录成功!");
                    string tp = languageFile.ReadString("MESSAGEBOX", "TP", "提示");
                    MessageBox.Show(ts, tp);
                    this.Close();
                }
                else
                {
                    string ts = languageFile.ReadString("LOGFORM", "T3", "用户密码输入错误!");
                    string tp = languageFile.ReadString("MESSAGEBOX", "TP", "提示");
                    MessageBox.Show(ts, tp, MessageBoxButtons.OK, MessageBoxIcon.Warning);
                    textBox2.Text = "";
                }
            }
        }
Esempio n. 24
0
 /// <summary>
 /// 语言设置加载
 /// </summary>
 private void Init_FormString()
 {
     this.Text = languageFile.ReadString("SERIALSETFORM", "TITLE", "串口设置");
     //this.label1.Text = languageFile.ReadString("[SERIALSETFORM]", "TITLE", "串口设置");
     this.groupBox1.Text       = languageFile.ReadString("SERIALSETFORM", "SET", "设定");
     this.label20.Text         = languageFile.ReadString("SERIALSETFORM", "MULTICOM", "多串口");
     this.label2.Text          = languageFile.ReadString("SERIALSETFORM", "COMSELCT", "串口选择");
     this.lb_port.Text         = languageFile.ReadString("SERIALSETFORM", "COM1", "串口号1");
     this.lb_baudRate.Text     = languageFile.ReadString("SERIALSETFORM", "BPS1 ", "波特率1");
     this.bt_confirm.Text      = languageFile.ReadString("SERIALSETFORM", "OK", "确认");
     this.bt_cancel.Text       = languageFile.ReadString("SERIALSETFORM", "CANCEL ", "取消");
     this.bt_confirm.TextAlign = ContentAlignment.MiddleCenter;
     this.bt_cancel.TextAlign  = ContentAlignment.MiddleCenter;
     port1 = languageFile.ReadString("SERIALSETFORM", "SELECT1", "串口1");
     port2 = languageFile.ReadString("SERIALSETFORM", "SELECT2", "串口2(矩阵)");
     com1  = languageFile.ReadString("SERIALSETFORM", "MULTI1", "单串口");
     com2  = languageFile.ReadString("SERIALSETFORM", "MULTI2", "多串口");
     cb_multiCom.Items.Clear();
     cb_multiCom.Items.Add(com1);
     cb_multiCom.Items.Add(com2);
 }
Esempio n. 25
0
        /// <summary>
        /// 初始化串口
        /// </summary>
        public void initSerialPort()
        {
            settingFile = new IniFiles(Application.StartupPath + "\\setting.ini");
            String readPort1 = settingFile.ReadString("Com Set", "port1", "COM1"); //串口1
            String readPort2 = settingFile.ReadString("Com Set", "port2", "COM1"); //串口2

            String[] serialPorts = System.IO.Ports.SerialPort.GetPortNames();
            cb_port1.Items.Clear();
            cb_port2.Items.Clear();
            for (int i = 0; i < serialPorts.Length; i++) //找出所有串口,并选择文件中的
            {
                cb_port1.Items.Add(serialPorts[i]);      //初始化串口1
                if (readPort1.Equals(serialPorts[i]))
                {
                    cb_port1.SelectedIndex = i;
                }
                cb_port2.Items.Add(serialPorts[i]);//初始化串口2
                if (readPort2.Equals(serialPorts[i]))
                {
                    cb_port2.SelectedIndex = i;
                }

                //Console.WriteLine(serialPorts[i]);
            }
            if (cb_port1.Items.Count > 0 && cb_port1.SelectedIndex < 0)//如果文件读出来的串口名没有,则默认第一个。
            {
                cb_port1.SelectedIndex = 0;
            }
            if (cb_port2.Items.Count > 0 && cb_port2.SelectedIndex < 0)//如果文件读出来的串口名没有,则默认第一个。串口2
            {
                cb_port2.SelectedIndex = 0;
            }

            cb_baudRate1.Text = settingFile.ReadString("Com Set", "baudrate1", "9600");        //串口1
            cb_baudRate2.Text = settingFile.ReadString("Com Set", "baudrate2", "9600");        //串口1
            cb_timeout.Text   = settingFile.ReadString("Com Set", "timeout", "10");            //延时

            cb_multiCom.SelectedIndex = settingFile.ReadInteger("Com Set", "MultiCom", 1) - 1; //多串口选择
            if (cb_serialSelect.Items.Count > 0)
            {
                cb_serialSelect.SelectedIndex = 0;//串口选择,默认为串口1
            }
            combo_netpro.SelectedIndex = settingFile.ReadInteger("Com Set", "TCPP", 0);
            textBox_IP.Text            = settingFile.ReadString("Com Set", "IP", "127.0.01");
            textBox_Port.Text          = settingFile.ReadString("Com Set", "Port", "8234");
            numericUpDown1.Value       = (decimal)settingFile.ReadInteger("Com Set", "Con", 16);
            if (f.TCPCOM)
            {
                checkBox2.Checked = true;
                groupBox1.Enabled = false;
                groupBox2.Enabled = true;
            }
            else
            {
                checkBox1.Checked = true;
                groupBox1.Enabled = true;
                groupBox2.Enabled = false;
            }
            if (f.PJLink_Pro)
            {
                checkBox3.Checked = true;
            }
            else
            {
                checkBox3.Checked = false;
            }
        }
Esempio n. 26
0
 private void Form_RunText_Load(object sender, EventArgs e)
 {
     {
         label_text.Font      = f;
         label_text.ForeColor = c;
         //Console.WriteLine("===" + c);
         //this.BackColor = bc;
         label_text.Text = text;
         if (text.Equals(""))
         {
             label_text.Visible = false;
             //contextMenuStrip1.Enabled = false;
             subTextToolStripMenuItem.Enabled = false;
             AutotoolStripMenuItem1.Enabled   = false;
         }
         timer1.Interval = Interval;
         Lable_Resize();
         label_text.BackColor = Color.Transparent;
         if (tans_Flag)
         {
             this.TopMost   = true;
             timer2.Enabled = true;
         }
         else
         {
             if (image_Flag)
             {
                 string s = settingFile.ReadString("SETTING", "PictureLogo", "");
                 //Console.WriteLine("s ====" + s);
                 if (!s.Equals(""))
                 {
                     s = s.Substring(s.Length - 4, 4);
                     s = Application.StartupPath + @"\pic\logoshow" + s;
                     if (this.BackgroundImage != null)
                     {
                         this.BackgroundImage.Dispose();
                     }
                     Image im = Image.FromFile(s);
                     this.BackgroundImage       = new Bitmap(im);
                     this.BackgroundImageLayout = ImageLayout.Stretch;
                 }
                 else
                 {
                     if (this.BackgroundImage != null)
                     {
                         this.BackgroundImage.Dispose();
                     }
                     //this.BackgroundImage = global::WallControl.Properties.Resources.上位机_英文版_MTC_New_Logo;
                     this.BackgroundImageLayout = ImageLayout.Stretch;
                 }
                 timer1.Enabled = false;
                 //AutoAdjustShow();
                 label_text.TextAlign                 = ContentAlignment.MiddleCenter;
                 subStopToolStripMenuItem.Checked     = true;
                 AutotoolStripMenuItem1.Enabled       = true;
                 subStartToolStripMenuItem.CheckState = CheckState.Unchecked;
                 subStartToolStripMenuItem.Enabled    = false;
                 subColorToolStripMenuItem.Enabled    = false;
                 //int h = label_text.Size.Height;
                 this.Height = (this.Size.Width * 9) / 16;
                 //label_text.Location = new Point(w, (this.Size.Height - h) / 2);
             }
         }
         //if (tans_Flag)
         {
             if (Interval > 0 && !text.Equals(""))
             {
                 /*
                  * Thread t = new Thread(new ThreadStart(StartRunText));
                  * t.IsBackground = true;
                  * t.Start();
                  */
                 if (direction)
                 {
                     label_text.Left = this.Width;
                 }
                 else
                 {
                     label_text.Left = -label_text.Width;
                 }
                 if (!image_Flag)
                 {
                     timer1.Enabled = true;
                     timer1.Start();
                 }
             }
             else
             {
                 timer1.Enabled = false;
                 //AutoAdjustShow();
                 label_text.TextAlign = ContentAlignment.MiddleCenter;
                 subStartToolStripMenuItem.CheckState = CheckState.Unchecked;
                 subStopToolStripMenuItem.CheckState  = CheckState.Checked;
                 AutotoolStripMenuItem1.Enabled       = true;
                 subStartToolStripMenuItem.Enabled    = false;
                 //int h = label_text.Size.Height;
                 //int w = (this.Size.Width - label_text.Size.Width) / 2;
                 //label_text.Location = new Point(w, (this.Size.Height - h) / 2);
             }
             this.Activate();
         }
     }
     Lable_Resize();
     //IntPtr hDeskTop = FindWindow(null, "Form_RunText");
     //SetParent(this.Handle, hDeskTop);
     this.SetStyle(ControlStyles.AllPaintingInWmPaint | ControlStyles.OptimizedDoubleBuffer, true);
     TopMostWindow.SetTopomost(this.Handle);
 }
Esempio n. 27
0
        //AutoSizeFormClass asc = new AutoSizeFormClass();
        public Form_Auto(MainForm f, int count)
        {
            this.f     = f;
            this.count = count;
            InitializeComponent();
            settingFile       = new IniFiles(Application.StartupPath + "\\setting.ini");
            languageFile      = new IniFiles(Application.StartupPath + "\\LanguagePack" + f.package);
            this.Text         = languageFile.ReadString("AUTOFORM", "TITLE", "预案场景");
            this.label1.Text  = languageFile.ReadString("AUTOFORM", "T_I", "间隔时间(30s~24h)");
            this.button1.Text = languageFile.ReadString("AUTOFORM", "START", "开始");
            string sl = languageFile.ReadString("AUTOFORM", "SCENES", "场景");

            if (f.Chinese_English == 1)
            {
                System.Threading.Thread.CurrentThread.CurrentUICulture = new System.Globalization.CultureInfo("en-US");
                ApplyResource();
            }
            else if (f.Chinese_English == 0)
            {
                System.Threading.Thread.CurrentThread.CurrentUICulture = new System.Globalization.CultureInfo("zh-CHS");
                ApplyResource();
            }
            else
            {
                System.Threading.Thread.CurrentThread.CurrentUICulture = new System.Globalization.CultureInfo("zh-CHT");
                ApplyResource();
            }

            foreach (Control var in this.Controls)
            {
                if (var is System.Windows.Forms.CheckBox)
                { //如果是CheckBox
                    //Console.WriteLine(var.Name);
                    var.Text = var.Name.Replace("checkBox", sl);
                    string s = var.Name;
                    //if (f.Chinese_English)
                    {
                        if (int.Parse(s.Substring(8, s.Length - 8)) > count)
                        {
                            var.Enabled = false;
                        }
                    }
                }
            }
            string str = settingFile.ReadString("SCREEN", "NUM", "");

            if (str != "")
            {
                string[] s;
                s = str.Split(new char[] { ',' });
                int k = s.Length;
                if (k > 0)
                {
                    for (int i = 0; i < k; i++)
                    {
                        //Console.WriteLine(s[i]);
                        switch (s[i])
                        {
                        case "1":
                            checkBox1.Checked = true;
                            continue;

                        case "2":
                            checkBox2.Checked = true;
                            continue;

                        case "3":
                            checkBox3.Checked = true;
                            continue;

                        case "4":
                            checkBox4.Checked = true;
                            continue;

                        case "5":
                            checkBox5.Checked = true;
                            continue;

                        case "6":
                            checkBox6.Checked = true;
                            continue;

                        case "7":
                            checkBox7.Checked = true;
                            continue;

                        case "8":
                            checkBox8.Checked = true;
                            continue;

                        case "9":
                            checkBox9.Checked = true;
                            continue;

                        case "10":
                            checkBox10.Checked = true;
                            continue;

                        case "11":
                            checkBox11.Checked = true;
                            continue;

                        case "12":
                            checkBox12.Checked = true;
                            continue;

                        default:
                            continue;
                        }
                    }
                }
            }
            textBox1.Text = settingFile.ReadString("SCREEN", "NUM_time", "30");
        }
Esempio n. 28
0
 /// <summary>
 /// 语言设置加载
 /// </summary>
 private void Init_FormString()
 {
     this.Text          = languageFile.ReadString("UARTRFORM", "TITLE", "遥控");
     this.label10.Text  = languageFile.ReadString("UARTRFORM", "P", "电源");
     this.label3.Text   = languageFile.ReadString("UARTRFORM", "M", "静音");
     this.label1.Text   = languageFile.ReadString("UARTRFORM", "V1", "音量-");
     this.label2.Text   = languageFile.ReadString("UARTRFORM", "V2", "音量+");
     this.label4.Text   = languageFile.ReadString("UARTRFORM", "MENU", "菜单");
     this.label11.Text  = languageFile.ReadString("UARTRFORM", "S", "信源");
     this.label7.Text   = languageFile.ReadString("UARTRFORM", "PLAY", "播放");
     this.label5.Text   = languageFile.ReadString("UARTRFORM", "PAUSE", "停止");
     this.label6.Text   = languageFile.ReadString("UARTRFORM", "STOP", "暂停");
     this.label8.Text   = languageFile.ReadString("UARTRFORM", "R", "快退");
     this.button22.Text = languageFile.ReadString("UARTRFORM", "OK", "OK");
     //this.label12.Text = languageFile.ReadString("UARTRFORM", "N", "下一首");
     this.label9.Text = languageFile.ReadString("UARTRFORM", "F", "快进");
 }
Esempio n. 29
0
        public Form_OnOff(MainForm f)
        {
            InitializeComponent();
            this.f                       = f;
            settingFile                  = new IniFiles(Application.StartupPath + "\\setting.ini");
            dateTimePicker1.Format       = DateTimePickerFormat.Custom;
            dateTimePicker1.CustomFormat = "yyyy-MM-dd HH:mm:ss";
            dateTimePicker2.Format       = DateTimePickerFormat.Custom;
            dateTimePicker2.CustomFormat = "yyyy-MM-dd HH:mm:ss";
            languageFile                 = new IniFiles(Application.StartupPath + "\\LanguagePack" + f.package);

            Init_FormString();

            if (f.Chinese_English == 1)
            {
                System.Threading.Thread.CurrentThread.CurrentUICulture = new System.Globalization.CultureInfo("en-US");
                ApplyResource();
            }
            else if (f.Chinese_English == 0)
            {
                System.Threading.Thread.CurrentThread.CurrentUICulture = new System.Globalization.CultureInfo("zh-CHS");
                ApplyResource();
            }
            else
            {
                System.Threading.Thread.CurrentThread.CurrentUICulture = new System.Globalization.CultureInfo("zh-CHT");
                ApplyResource();
            }

            if (f.Delay_on)
            {
                checkBox1.Checked = true;
            }
            else
            {
                checkBox1.Checked = false;
            }
            if (f.Delay_off)
            {
                checkBox2.Checked = true;
            }
            else
            {
                checkBox2.Checked = false;
            }
            if (f.Timing_on)
            {
                checkBox3.Checked     = true;
                dateTimePicker1.Value = f.on;
            }
            else
            {
                checkBox3.Checked = false;
            }
            if (f.Timing_off)
            {
                checkBox4.Checked     = true;
                dateTimePicker2.Value = f.off;
            }
            else
            {
                checkBox4.Checked = false;
            }
            //if (f.Delay_on || f.Delay_off)
            comboBox1.SelectedIndex = f.Delay_time1 / 100 - 1;

            string s = settingFile.ReadString("SETTING", "On_time", DateTime.Now.ToString());

            dateTimePicker1.Value = DateTime.Parse(s);
            s = settingFile.ReadString("SETTING", "Off_time", DateTime.Now.ToString());
            dateTimePicker2.Value = DateTime.Parse(s);
        }
Esempio n. 30
0
 /// <summary>
 /// 语言设置加载
 /// </summary>
 private void Init_FormString()
 {
     this.Text                 = languageFile.ReadString("ONOFFFORM", "TITLE", "开关机设置");
     this.label3.Text          = languageFile.ReadString("ONOFFFORM", "OFF_D", "定时关机:");
     this.label1.Text          = languageFile.ReadString("ONOFFFORM", "TIME1", "延时间隔(ms):");
     this.label2.Text          = languageFile.ReadString("ONOFFFORM", "ON_D", "定时开机:");
     this.groupBox1.Text       = languageFile.ReadString("ONOFFFORM", "ONOFFTIME", "延时开关机");
     this.groupBox2.Text       = languageFile.ReadString("ONOFFFORM", "TIME2", "定时开关机");
     this.button2.Text         = languageFile.ReadString("ONOFFFORM", "EMPLOY", "应用");
     this.button1.Text         = languageFile.ReadString("ONOFFFORM", "EMPLOY", "应用");
     this.checkBox1.Text       = languageFile.ReadString("ONOFFFORM", "ON_T", "开机");
     this.checkBox2.Text       = languageFile.ReadString("ONOFFFORM", "OFF_T", "关机");
     this.checkBox3.Text       = languageFile.ReadString("ONOFFFORM", "TURN_ON", "启用");
     this.checkBox4.Text       = languageFile.ReadString("ONOFFFORM", "TURN_ON", "启用");
     this.numericUpDown1.Value = settingFile.ReadInteger("SETTING", "DELAY", 0);
     this.label4.Text          = languageFile.ReadString("ONOFFFORM", "T1", "同时启用定时开机和关机操作时,请设定两个时间差大于一分钟!");
     this.label5.Text          = languageFile.ReadString("ONOFFFORM", "T2", "定时开关机的时间设置至少大于系统当前时间30秒!");
 }