fData_pnts3d(Dictionary <float, FEATUREDATA> fData, Alignment objAlignRF, Alignment objAlignPL)
{
List <Point3d> pnts3d = new List <Point3d>();
FEATUREDATA fd = default(FEATUREDATA);
double fk = 0;
double dblEasting = 0;
double dblNorthing = 0;
int i = -1;
int k = fData.Count - 1;
foreach (KeyValuePair <float, FEATUREDATA> kvp in fData)
{
fd = kvp.Value;
fk = kvp.Key;
i = i + 1;
switch (fd.AlignName)
{
case "RF":
objAlignRF.PointLocation(fk, fd.Offset, ref dblEasting, ref dblNorthing);
pnts3d.Add(new Point3d(dblEasting, dblNorthing, fd.Elev));
break;
case "PL":
objAlignPL.PointLocation(fk, fd.Offset, ref dblEasting, ref dblNorthing);
pnts3d.Add(new Point3d(dblEasting, dblNorthing, fd.Elev));
break;
}
}
return(pnts3d);
}
wallBrlkinesToSurface(Alignment objAlignPL, Alignment objAlignRF, Alignment objAlignWall)
{
FEATUREDATA fDataW0 = new FEATUREDATA();
FEATUREDATA fDataW1 = new FEATUREDATA();
FEATUREDATA fDataW2 = new FEATUREDATA();
FEATUREDATA fDataW3 = new FEATUREDATA();
FEATUREDATA fDataG0 = new FEATUREDATA();
FEATUREDATA fDataGB = new FEATUREDATA();
bool exists = false;
try
{
TinSurface objSurfaceCPNT = Surf.getTinSurface("CPNT-ON", out exists);
string strLayer = null;
strLayer = string.Format("{0}-BRKLINE", objAlignPL.Name);
Layer.manageLayers(strLayer);
//-------------------------------------GUTTER BREAKLINES -------------------------------------------------------------------------------------------------------------------ADDED TO CPNT
ObjectIdCollection objEntsGutter = new ObjectIdCollection();
ObjectIdCollection objEntsEndsGutter = new ObjectIdCollection();
for (int i = 0; i < p.dGUTs.Count - 1; i++)
{
if (p.dGUTs[i]["W3"].Count > 1)
{
objEntsGutter.Add(wu.fData_3dPoly("W3", strLayer, p.dGUTs[i]["W3"], objAlignRF, objAlignPL));
objEntsGutter.Add(wu.fData_3dPoly("G0", strLayer, p.dGUTs[i]["G0"], objAlignRF, objAlignPL));
objEntsGutter.Add(wu.fData_3dPoly("GB", strLayer, p.dGUTs[i]["GB"], objAlignRF, objAlignPL));
objEntsEndsGutter = wdp.makeEndBrklinesWALL(strLayer, objEntsGutter, false);
objSurfaceCPNT.BreaklinesDefinition.AddStandardBreaklines(objEntsEndsGutter, 0, 0, 0, 0);
}
}
objSurfaceCPNT.BreaklinesDefinition.AddStandardBreaklines(objEntsGutter, 0, 0, 0, 0);
//-------------------------------------WALL BREAKLINES------------------------------------------------------------------------------------------------------------------ NEW SURFACE - WALL
ObjectIdCollection objEntsWall = new ObjectIdCollection();
ObjectIdCollection objEntEndsWall = new ObjectIdCollection();
ObjectIdCollection objEntsWallCPNT = new ObjectIdCollection();
for (int i = 0; i < p.dWALLs.Count - 1; i++)
{
//TEST IS THERE ARE AT LEAST TWO POINTS
if (p.dWALLs[i]["W0"].Count > 1)
{
objEntsWall.Add(wu.fData_3dPoly("W0", strLayer, p.dWALLs[i]["W0"], objAlignRF, objAlignPL));
objEntsWall.Add(wu.fData_3dPoly("W1", strLayer, p.dWALLs[i]["W1"], objAlignRF, objAlignPL));
objEntsWall.Add(wu.fData_3dPoly("W2", strLayer, p.dWALLs[i]["W2"], objAlignRF, objAlignPL));
objEntsWall.Add(wu.fData_3dPoly("W3", strLayer, p.dWALLs[i]["W3"], objAlignRF, objAlignPL));
objEntsWall.Add(wu.fData_3dPoly("W4", strLayer, p.dWALLs[i]["W4"], objAlignRF, objAlignPL));
objEntsWall.Add(wu.fData_3dPoly("W5", strLayer, p.dWALLs[i]["W5"], objAlignRF, objAlignPL));
objEntsWall.Add(wu.fData_3dPoly("W6", strLayer, p.dWALLs[i]["W6"], objAlignRF, objAlignPL));
objEntsWall.Add(wu.fData_3dPoly("W7", strLayer, p.dWALLs[i]["W7"], objAlignRF, objAlignPL));
objEntsWall.Add(wu.fData_3dPoly("W8", strLayer, p.dWALLs[i]["W8"], objAlignRF, objAlignPL));
objEntsWall.Add(wu.fData_3dPoly("W9", strLayer, p.dWALLs[i]["W9"], objAlignRF, objAlignPL));
objEntsWallCPNT.Add(objEntsWall[0]);
objEntsWallCPNT.Add(objEntsWall[1]);
objEntsWallCPNT.Add(objEntsWall[2]);
objEntsWallCPNT.Add(objEntsWall[3]);
TinSurface objSurfaceWallCut = Surf.getTinSurface(Align.getAlignName("WALL") + "-CUT", out exists);
objSurfaceWallCut.BreaklinesDefinition.AddStandardBreaklines(objEntsWall, 0, 0, 0, 0);
objEntEndsWall = wdp.makeEndBrklinesWALL(strLayer, objEntsWall, true);
objSurfaceWallCut.BreaklinesDefinition.AddStandardBreaklines(objEntEndsWall, 0, 0, 0, 0);
//ADD END BREAKLINES
objSurfaceCPNT.BreaklinesDefinition.AddStandardBreaklines(objEntsWallCPNT, 0, 0, 0, 0);
}
}
//----------------------------------- WALL ENDS -------------------------------------------------------------------------------------------------------------------
double dblStaBeg = objAlignRF.StartingStation;
double dblStaEnd = objAlignRF.EndingStation;
double dblEasting = 0, dblNorthing = 0;
if (p.dWALLs[0]["W0"].ContainsKey((float)dblStaBeg))
{
List <Point3d> dblPntsBEG = new List <Point3d>();
fDataW0 = p.dWALLs[0]["W0"][(float)dblStaBeg];
fDataW1 = p.dWALLs[0]["W1"][(float)dblStaBeg];
fDataW2 = p.dWALLs[0]["W2"][(float)dblStaBeg];
fDataW3 = p.dWALLs[0]["W3"][(float)dblStaBeg];
fDataG0 = p.dGUTs[0]["G0"][(float)dblStaBeg];
fDataGB = p.dGUTs[0]["GB"][(float)dblStaBeg];
objAlignRF.PointLocation(fDataW0.Station, fDataW0.Offset, ref dblEasting, ref dblNorthing);
dblPntsBEG.Add(new Point3d(dblEasting, dblNorthing, fDataW0.Elev));
objAlignRF.PointLocation(fDataW1.Station, fDataW1.Offset, ref dblEasting, ref dblNorthing);
dblPntsBEG.Add(new Point3d(dblEasting, dblNorthing, fDataW1.Elev));
objAlignRF.PointLocation(fDataW2.Station, fDataW2.Offset, ref dblEasting, ref dblNorthing);
dblPntsBEG.Add(new Point3d(dblEasting, dblNorthing, fDataW2.Elev));
objAlignRF.PointLocation(fDataW3.Station, fDataW3.Offset, ref dblEasting, ref dblNorthing);
dblPntsBEG.Add(new Point3d(dblEasting, dblNorthing, fDataW3.Elev));
objAlignRF.PointLocation(fDataG0.Station, fDataG0.Offset, ref dblEasting, ref dblNorthing);
dblPntsBEG.Add(new Point3d(dblEasting, dblNorthing, fDataG0.Elev));
objAlignPL.PointLocation(fDataGB.Station, fDataGB.Offset, ref dblEasting, ref dblNorthing);
dblPntsBEG.Add(new Point3d(dblEasting, dblNorthing, fDataGB.Elev));
//Wall_Forms.fWall1.PntsWallCutBeg = dblPntsBEG;
}
int j = p.dWALLs.Count - 1;
if (j > 1)
{
if (p.dWALLs[j]["W0"].ContainsKey((float)dblStaEnd))
{
List <Point3d> dblPntsEND = new List <Point3d>();
objAlignRF.PointLocation(fDataW0.Station, fDataW0.Offset, ref dblEasting, ref dblNorthing);
dblPntsEND.Add(new Point3d(dblEasting, dblNorthing, fDataW0.Elev));
objAlignRF.PointLocation(fDataW1.Station, fDataW1.Offset, ref dblEasting, ref dblNorthing);
dblPntsEND.Add(new Point3d(dblEasting, dblNorthing, fDataW1.Elev));
objAlignRF.PointLocation(fDataW2.Station, fDataW2.Offset, ref dblEasting, ref dblNorthing);
dblPntsEND.Add(new Point3d(dblEasting, dblNorthing, fDataW2.Elev));
objAlignRF.PointLocation(fDataW3.Station, fDataW3.Offset, ref dblEasting, ref dblNorthing);
dblPntsEND.Add(new Point3d(dblEasting, dblNorthing, fDataW3.Elev));
objAlignRF.PointLocation(fDataG0.Station, fDataG0.Offset, ref dblEasting, ref dblNorthing);
dblPntsEND.Add(new Point3d(dblEasting, dblNorthing, fDataG0.Elev));
objAlignPL.PointLocation(fDataGB.Station, fDataGB.Offset, ref dblEasting, ref dblNorthing);
dblPntsEND.Add(new Point3d(dblEasting, dblNorthing, fDataGB.Elev));
//Wall_Forms.wForms.fWall1.PntsWallCutEnd = dblPntsEND;
}
}
//-------------------------------------REGULARS----------------------------------------------------------------------------------------------------------------------------------- ADD TO CPNT
ObjectIdCollection objEntsNOM = new ObjectIdCollection();
ObjectIdCollection objEntEnds = new ObjectIdCollection();
objEntsNOM.Add(wu.fData_3dPoly("RF", strLayer, p.dNOM["RF"], objAlignRF, objAlignPL));
objEntsNOM.Add(wu.fData_3dPoly("RF", strLayer, p.dNOM["FL"], objAlignRF, objAlignPL));
objEntsNOM.Add(wu.fData_3dPoly("RF", strLayer, p.dNOM["TC"], objAlignRF, objAlignPL));
objEntsNOM.Add(wu.fData_3dPoly("RF", strLayer, p.dNOM["TOE"], objAlignRF, objAlignPL));
objEntsNOM.Add(wu.fData_3dPoly("RF", strLayer, p.dNOM["TOP"], objAlignRF, objAlignPL));
objEntsNOM.Add(wu.fData_3dPoly("RF", strLayer, p.dNOM["PL"], objAlignRF, objAlignPL));
objEntEnds = wdp.makeEndBrklines(strLayer, objEntsNOM);
objSurfaceCPNT.BreaklinesDefinition.AddStandardBreaklines(objEntsNOM, 0, 0, 0, 0);
objSurfaceCPNT.BreaklinesDefinition.AddStandardBreaklines(objEntEnds, 0, 0, 0, 0);
}
catch (Autodesk.AutoCAD.Runtime.Exception)
{
}
}
