public ITerrainChannel LoadFile (string filename, IScene scene, int offsetX, int offsetY, int fileWidth, int fileHeight,
int sectionWidth, int sectionHeight)
{
TerrainChannel retval = new TerrainChannel (sectionWidth, sectionHeight, scene);
FileInfo file = new FileInfo (filename);
FileStream s = file.Open (FileMode.Open, FileAccess.Read);
BinaryReader bs = new BinaryReader (s);
int currFileYOffset = 0;
// if our region isn't on the first Y section of the areas to be landscaped, then
// advance to our section of the file
while (currFileYOffset < offsetY) {
// read a whole strip of regions
int heightsToRead = sectionHeight * (fileWidth * sectionWidth);
bs.ReadBytes (heightsToRead * 4); // because the floats are 4 bytes in the file
currFileYOffset++;
}
// got to the Y start offset within the file of our region
// so read the file bits associated with our region
int y;
// for each Y within our Y offset
for (y = 0; y < sectionHeight; y++) {
int currFileXOffset = 0;
// if our region isn't the first X section of the areas to be landscaped, then
// advance the stream to the X start pos of our section in the file
// i.e. eat X up to where we start
while (currFileXOffset < offsetX) {
bs.ReadBytes (sectionWidth * 4); // 4 bytes = single
currFileXOffset++;
}
// got to our X offset, so write our regions X line
int x;
for (x = 0; x < sectionWidth; x++) {
// Read a strip and continue
retval [x, y] = bs.ReadSingle ();
}
// record that we wrote it
currFileXOffset++;
// if our region isn't the last X section of the areas to be landscaped, then
// advance the stream to the end of this Y column
while (currFileXOffset < fileWidth) {
// eat the next regions x line
bs.ReadBytes (sectionWidth * 4); // 4 bytes = single
currFileXOffset++;
}
}
bs.Close ();
s.Close ();
return retval;
}
public ITerrainChannel MakeCopy()
{
TerrainChannel copy = new TerrainChannel(false, m_scene)
{
m_map = (short[])m_map.Clone(), taint = (bool[, ])taint.Clone()
};
return(copy);
}
/// <summary>
/// Reset the terrain of this region to the default
/// </summary>
public void ResetWater()
{
if (!m_noTerrain)
{
TerrainChannel channel = new TerrainChannel(m_scene);
m_waterChannel = channel;
m_scene.SimulationDataService.Tainted();
CheckForTerrainUpdates(false, true, true);
}
}
/// <summary>
/// Reset the terrain of this region to the default
/// </summary>
public void ResetTerrain()
{
if (!m_noTerrain)
{
TerrainChannel channel = new TerrainChannel(m_scene);
m_channel = channel;
m_scene.SimulationDataService.Tainted();
m_scene.RegisterModuleInterface(m_channel);
CheckForTerrainUpdates(false, true, false);
}
}
/// <summary>
/// Loads a terrain file from a stream and installs it in the scene.
/// </summary>
/// <param name="filename">Filename to terrain file. Type is determined by extension.</param>
/// <param name="stream"></param>
/// <param name="offsetX"></param>
/// <param name="offsetY"></param>
/// <param name="update"></param>
public ITerrainChannel InternalLoadFromStream(string filename, Stream stream, int offsetX, int offsetY,
ITerrainChannel update)
{
ITerrainChannel channel = null;
// find the loader to use..
//var fileExt = Path.GetExtension(filename.ToLower());
//foreach (KeyValuePair<string, ITerrainLoader> floader in m_loaders)
// {
// if (fileExt != floader.Key)
// continue;
//
// ITerrainLoader loader = floader.Value;
//{
var loader = GetTerrainLoader (filename);
if (loader != null)
{
lock (m_scene)
{
try
{
channel = loader.LoadStream(stream, m_scene);
if (channel != null)
{
channel.Scene = m_scene;
if (update == null || (update.Height == channel.Height &&
update.Width == channel.Width))
{
if (m_scene.RegionInfo.RegionSizeX != channel.Width ||
m_scene.RegionInfo.RegionSizeY != channel.Height)
{
if ((channel.Width) > m_scene.RegionInfo.RegionSizeX ||
(channel.Height) > m_scene.RegionInfo.RegionSizeY)
{
TerrainChannel c = new TerrainChannel(true, m_scene);
for (int x = 0; x < m_scene.RegionInfo.RegionSizeX; x++)
{
for (int y = 0; y < m_scene.RegionInfo.RegionSizeY; y++)
{
c[x, y] = channel[x, y];
}
}
return c;
}
return null;
}
}
else
{
//Make sure it is in bounds
if ((offsetX + channel.Width) > update.Width ||
(offsetY + channel.Height) > update.Height)
{
MainConsole.Instance.Error(
"[TERRAIN]: Unable to load heightmap, the terrain you have given is larger than the current region.");
return null;
}
else
{
//Merge the terrains together at the specified offset
for (int x = offsetX; x < offsetX + channel.Width; x++)
{
for (int y = offsetY; y < offsetY + channel.Height; y++)
{
update[x, y] = channel[x - offsetX, y - offsetY];
}
}
return update;
}
}
}
}
catch (NotImplementedException)
{
MainConsole.Instance.Error("[TERRAIN]: Unable to load heightmap, the " + loader +
" parser does not support file loading. (May be save only)");
}
}
MainConsole.Instance.Info("[TERRAIN]: File (" + filename + ") loaded successfully");
return channel;
}
MainConsole.Instance.ErrorFormat("[TERRAIN]: Unable to load heightmap from {0}, no file loader available for that format.", filename);
return channel;
}
protected virtual ITerrainChannel LoadBitmap(Bitmap bitmap, IScene scene)
{
ITerrainChannel retval = new TerrainChannel(bitmap.Width, bitmap.Height, scene);
int x;
int y;
for (x = 0; x < bitmap.Width; x++)
{
for (y = 0; y < bitmap.Height; y++)
retval[x, y] = bitmap.GetPixel(x, bitmap.Height - y - 1).GetBrightness()*128;
}
return retval;
}
public void PaintEffect(ITerrainChannel map, UUID userID, float rx, float ry, float rz, float strength,
float duration, float BrushSize)
{
strength = TerrainUtil.MetersToSphericalStrength(strength);
int x, y;
// Using one 'rain' round for this, so skipping a useless loop
// Will need to adapt back in for the Flood brush
ITerrainChannel water = new TerrainChannel(map.Width, map.Height, null);
ITerrainChannel sediment = new TerrainChannel(map.Width, map.Height, null);
// Fill with rain
for (x = 0; x < water.Width; x++)
for (y = 0; y < water.Height; y++)
water[x, y] =
(float) Math.Max(0.0, TerrainUtil.SphericalFactor(x, y, rx, ry, strength)*rainHeight*duration);
for (int i = 0; i < rounds; i++)
{
// Erode underlying terrain
for (x = 0; x < water.Width; x++)
{
for (y = 0; y < water.Height; y++)
{
const float solConst = (1.0f/rounds);
float sedDelta = water[x, y]*solConst;
map[x, y] -= sedDelta;
sediment[x, y] += sedDelta;
}
}
// Move water
for (x = 0; x < water.Width; x++)
{
for (y = 0; y < water.Height; y++)
{
if (water[x, y] <= 0)
continue;
// Step 1. Calculate average of neighbors
int neighbours = 0;
float altitudeTotal = 0.0f;
float altitudeMe = map[x, y] + water[x, y];
const int NEIGHBOUR_ME = 4;
const int NEIGHBOUR_MAX = 9;
for (int j = 0; j < NEIGHBOUR_MAX; j++)
{
if (j != NEIGHBOUR_ME)
{
int[] coords = Neighbours(type, j);
coords[0] += x;
coords[1] += y;
if (coords[0] > map.Width - 1)
continue;
if (coords[1] > map.Height - 1)
continue;
if (coords[0] < 0)
continue;
if (coords[1] < 0)
continue;
// Calculate total height of this neighbor
float altitudeNeighbour = water[coords[0], coords[1]] + map[coords[0], coords[1]];
// If it's greater than me...
if (altitudeNeighbour - altitudeMe < 0)
{
// Add it to our calculations
neighbours++;
altitudeTotal += altitudeNeighbour;
}
}
}
if (neighbours == 0)
continue;
float altitudeAvg = altitudeTotal/neighbours;
// Step 2. Allocate water to neighbors.
for (int j = 0; j < NEIGHBOUR_MAX; j++)
{
if (j != NEIGHBOUR_ME)
{
int[] coords = Neighbours(type, j);
coords[0] += x;
coords[1] += y;
if (coords[0] > map.Width - 1)
continue;
if (coords[1] > map.Height - 1)
continue;
if (coords[0] < 0)
continue;
if (coords[1] < 0)
continue;
// Skip if we don't have water to begin with.
if (water[x, y] < 0)
continue;
// Calculate our delta average
float altitudeDelta = altitudeMe - altitudeAvg;
if (altitudeDelta < 0)
continue;
// Calculate how much water we can move
float waterMin = Math.Min(water[x, y], altitudeDelta);
float waterDelta = waterMin*((water[coords[0], coords[1]] + map[coords[0], coords[1]])
/altitudeTotal);
float sedimentDelta = sediment[x, y]*(waterDelta/water[x, y]);
if (sedimentDelta > 0)
{
sediment[x, y] -= sedimentDelta;
sediment[coords[0], coords[1]] += sedimentDelta;
}
}
}
}
}
// Evaporate
for (x = 0; x < water.Width; x++)
{
for (y = 0; y < water.Height; y++)
{
water[x, y] *= 1.0f - (rainHeight/rounds);
float waterCapacity = waterSaturation*water[x, y];
float sedimentDeposit = sediment[x, y] - waterCapacity;
if (sedimentDeposit > 0)
{
sediment[x, y] -= sedimentDeposit;
map[x, y] += sedimentDeposit;
}
}
}
}
// Deposit any remainder (should be minimal)
for (x = 0; x < water.Width; x++)
{
for (y = 0; y < water.Height; y++)
{
if (!map.Scene.Permissions.CanTerraformLand(userID, new Vector3(rx + x, ry + y, 0)))
continue;
if (sediment[x, y] > 0)
map[(int) rx + x, (int) ry + y] += sediment[x, y];
}
}
}
public ITerrainChannel MakeCopy()
{
TerrainChannel copy = new TerrainChannel(false, m_scene)
{m_map = (short[]) m_map.Clone(), taint = (bool[,]) taint.Clone()};
return copy;
}
public ITerrainChannel LoadFile (string filename, IScene scene, int offsetX, int offsetY, int fileWidth, int fileHeight,
int sectionWidth, int sectionHeight)
{
TerrainChannel retval = new TerrainChannel (sectionWidth, sectionHeight, scene);
FileInfo file = new FileInfo (filename);
FileStream s = file.Open (FileMode.Open, FileAccess.Read);
BinaryReader bs = new BinaryReader (s);
bool eof = false;
int fileXPoints = 0;
// Terragen file
while (eof == false) {
string tmp = Encoding.ASCII.GetString (bs.ReadBytes (4));
switch (tmp) {
case "SIZE":
fileXPoints = bs.ReadInt16 () + 1;
bs.ReadInt16 ();
break;
case "XPTS":
fileXPoints = bs.ReadInt16 ();
bs.ReadInt16 ();
break;
case "YPTS":
/*int fileYPoints = */
bs.ReadInt16 ();
bs.ReadInt16 ();
break;
case "ALTW":
eof = true;
short heightScale = bs.ReadInt16 ();
short baseHeight = bs.ReadInt16 ();
int currFileYOffset = 0;
// if our region isn't on the first X section of the areas to be landscaped, then
// advance to our section of the file
while (currFileYOffset < offsetY) {
// read a whole strip of regions
int heightsToRead = sectionHeight * fileXPoints;
bs.ReadBytes (heightsToRead * 2); // because the shorts are 2 bytes in the file
currFileYOffset++;
}
for (int y = 0; y < sectionHeight; y++) {
int currFileXOffset = 0;
// if our region isn't the first X section of the areas to be landscaped, then
// advance the stream to the X start pos of our section in the file
// i.e. eat X up to where we start
while (currFileXOffset < offsetX) {
bs.ReadBytes (sectionWidth * 2); // 2 bytes = short
currFileXOffset++;
}
// got to our X offset, so write our regions X line
for (int x = 0; x < sectionWidth; x++) {
// Read a strip and continue
retval [x, y] = baseHeight + bs.ReadInt16 () * heightScale / 65536;
}
// record that we wrote it
currFileXOffset++;
// if our region isn't the last X section of the areas to be landscaped, then
// advance the stream to the end of this Y column
while (currFileXOffset < fileWidth) {
// eat the next regions x line
bs.ReadBytes (sectionWidth * 2); // 2 bytes = short
currFileXOffset++;
}
//eat the last additional point
bs.ReadInt16 ();
}
break;
default:
bs.ReadInt32 ();
break;
}
}
bs.Close ();
s.Close ();
return retval;
}
public ITerrainChannel LoadStream (Stream s, IScene scene)
{
int size = (int)Math.Sqrt (s.Length);
TerrainChannel retval = new TerrainChannel (size, size, scene);
BinaryReader bs = new BinaryReader (s);
bool eof = false;
if (Encoding.ASCII.GetString (bs.ReadBytes (16)) == "TERRAGENTERRAIN ") {
int fileWidth = scene.RegionInfo.RegionSizeX;
int fileHeight = scene.RegionInfo.RegionSizeY;
// Terragen file
while (eof == false) {
string tmp = Encoding.ASCII.GetString (bs.ReadBytes (4));
switch (tmp) {
case "SIZE":
int sztmp = bs.ReadInt16 () + 1;
fileWidth = sztmp;
fileHeight = sztmp;
bs.ReadInt16 ();
break;
case "XPTS":
fileWidth = bs.ReadInt16 ();
bs.ReadInt16 ();
break;
case "YPTS":
fileHeight = bs.ReadInt16 ();
bs.ReadInt16 ();
break;
case "ALTW":
eof = true;
short heightScale = bs.ReadInt16 ();
short baseHeight = bs.ReadInt16 ();
for (int y = 0; y < fileHeight; y++) {
for (int x = 0; x < fileWidth; x++) {
retval [x, y] = baseHeight + bs.ReadInt16 () * heightScale / 65536;
}
}
break;
default:
bs.ReadInt32 ();
break;
}
}
}
bs.Close ();
return retval;
}
public ITerrainChannel LoadStream (Stream s, IScene scene)
{
BinaryReader bs = new BinaryReader (s);
int size = (int)Math.Sqrt (s.Length);
size /= sizeof (short);
TerrainChannel retval = new TerrainChannel (size, size, scene);
for (int y = 0; y < retval.Height; y++) {
for (int x = 0; x < retval.Width; x++) {
retval [x, y] = bs.ReadSingle ();
}
}
bs.Close ();
return retval;
}