private void btn_createCstirrup_Click(object sender, EventArgs e)
{
//기본객체 생성
RebarGroup rebarGroup = new RebarGroup();
Picker picker = new Picker();
//부재선택
TSM.ModelObject mainpart = picker.PickObject(Picker.PickObjectEnum.PICK_ONE_PART, "철근을 삽입할 부재를 선택하세요.");
TSM.Beam Beam = mainpart as TSM.Beam;
rebarGroup.Father = Beam;
//철근 형태를 결정할 Point 선택
TSM.Polygon polygon = new TSM.Polygon();
double MinX = Beam.GetSolid().MinimumPoint.X;
double MinY = Beam.GetSolid().MinimumPoint.Y;
double MinZ = Beam.GetSolid().MinimumPoint.Z;
double MaxX = Beam.GetSolid().MaximumPoint.X;
double MaxY = Beam.GetSolid().MaximumPoint.Y;
double MaxZ = Beam.GetSolid().MaximumPoint.Z;
polygon.Points.Add(new TSG.Point(MaxX, MinY, MinZ));
polygon.Points.Add(new TSG.Point(MaxX, MaxY, MinZ));
polygon.Points.Add(new TSG.Point(MaxX, MaxY, MaxZ));
polygon.Points.Add(new TSG.Point(MaxX, MinY, MaxZ));
polygon.Points.Add(new TSG.Point(MaxX, MinY, MinZ));
rebarGroup.Polygons.Add(polygon);
//철근 생성 위치를 결정할 Point 선택
//ArrayList locationPoints = picker.PickPoints(Picker.PickPointEnum.PICK_POLYGON, "철근 생성 위치를 결정할 포인트를 선택하세요.");
rebarGroup.StartPoint = new TSG.Point(MaxX, MinY, MinZ);
rebarGroup.EndPoint = new TSG.Point(MinX, MinY, MinZ);
//RebarInfo 클래스에서 불러올 값
rebarGroup.Name = "Rebar";
rebarGroup.Size = "13";
rebarGroup.Grade = "SD400";
rebarGroup.RadiusValues.Add(60.00);
rebarGroup.Class = 11;
//Form에서 설정
rebarGroup.StartHook.Shape = RebarHookData.RebarHookShapeEnum.HOOK_135_DEGREES;
rebarGroup.StartHook.Length = 100.0;
rebarGroup.StartHook.Radius = 20.0;
rebarGroup.EndHook.Shape = RebarHookData.RebarHookShapeEnum.HOOK_135_DEGREES;
rebarGroup.EndHook.Length = 100.0;
rebarGroup.EndHook.Radius = 20.0;
rebarGroup.OnPlaneOffsets.Add(25.00);
rebarGroup.FromPlaneOffset = 25;
rebarGroup.StartPointOffsetValue = 25;
rebarGroup.EndPointOffsetValue = 25;
rebarGroup.SpacingType = BaseRebarGroup.RebarGroupSpacingTypeEnum.SPACING_TYPE_TARGET_SPACE;
rebarGroup.Spacings.Add(200);
rebarGroup.ExcludeType = BaseRebarGroup.ExcludeTypeEnum.EXCLUDE_TYPE_NONE;
rebarGroup.StirrupType = RebarGroup.RebarGroupStirrupTypeEnum.STIRRUP_TYPE_POLYGONAL;
if (!rebarGroup.Insert())
{
Console.WriteLine("insert failed");
}
else
{
model.CommitChanges();
}
}
private void button2_Click(object sender, EventArgs e)
{
// *기본 가정
// 1) 슬라브를 배치할 두 빔은 평행
// 2) 슬라브는 비스듬하게 배치되지 않음.(두빔에 항상 수직방향으로 배치됨)
// 3) 슬라브는 z평면과 수평하게 배치됨
TSM.Model currentModel = new TSM.Model();
try
{
// 1. 슬라브 객체 생성
ContourPlate contourPlate = new ContourPlate();
// 2. 슬라브 생성할 두 부재 선택
Picker picker = new Picker();
TSM.ModelObject mainpart = picker.PickObject(Picker.PickObjectEnum.PICK_ONE_PART, "슬라브를 삽입할 첫번째 부재를 선택하세요.");
TSM.Beam startBeam = mainpart as TSM.Beam;
mainpart = picker.PickObject(Picker.PickObjectEnum.PICK_ONE_PART, "슬라브를 삽입할 두번째 부재를 선택하세요.");
TSM.Beam endBeam = mainpart as TSM.Beam;
// 3. 기본 방향벡터 생성
// 1) StartBeam의 길이방향 단위벡터
TSG.Vector startBeamLDirectionVector = new TSG.Vector(startBeam.EndPoint - startBeam.StartPoint).GetNormal();
// 2) StartBeam의 높이방향 단위벡터-
TSG.Vector startBeamHDirecitionVector = new TSG.Vector(0, 0, 1); //추후 기울어진 빔에도 적용가능하도록 변경
// EdgeEnumerator를 통해 StartBeam의 높이방향 단위벡터 구하기
Solid solid = startBeam.GetSolid();
if (solid != null)
{
EdgeEnumerator edgeEnumerator = solid.GetEdgeEnumerator();
int edgeCount = 0;
while (edgeEnumerator.MoveNext())
{
var edge = edgeEnumerator.Current as Edge;
if (edge != null)
{
Console.WriteLine("Start : " + edge.StartPoint.ToString());
Console.WriteLine("End : " + edge.EndPoint.ToString());
Console.WriteLine("Type :" + edge.Type.ToString());
if (edgeCount == 8)
{
startBeamHDirecitionVector = new TSG.Vector((edge.EndPoint.X - edge.StartPoint.X) / 2, (edge.EndPoint.Y - edge.StartPoint.Y) / 2, (edge.EndPoint.Z - edge.StartPoint.Z) / 2).GetNormal();
}
edgeCount++;
}
}
}
// 3) StartBeam -> EndBeam 방향 단위벡터 (중점에서 중점 잇는 벡터)
TSG.Point sbSP = startBeam.StartPoint;
TSG.Point sbEP = startBeam.EndPoint;
TSG.Point ebSP = endBeam.StartPoint;
TSG.Point ebEP = endBeam.EndPoint;
TSG.Point starBeamCenterPoint = new TSG.Point((sbSP.X + sbEP.X) / 2, (sbSP.Y + sbEP.Y) / 2, (sbSP.Z + sbEP.Z) / 2);
TSG.Point endBeamCenterPoint = new TSG.Point((ebSP.X + ebEP.X) / 2, (ebSP.Y + ebEP.Y) / 2, (ebSP.Z + ebEP.Z) / 2);
TSG.Vector startBeamToEndBeamVector = new TSG.Vector((ebSP.X + ebEP.X) / 2 - (sbSP.X + sbEP.X) / 2, (ebSP.Y + ebEP.Y) / 2 - (sbSP.Y + sbEP.Y) / 2, (ebSP.Z + ebEP.Z) / 2 - (sbSP.Z + sbEP.Z) / 2);
TSG.Vector startBeamToEndBeamDirectionVector = new TSG.Vector((ebSP.X + ebEP.X) / 2 - (sbSP.X + sbEP.X) / 2, (ebSP.Y + ebEP.Y) / 2 - (sbSP.Y + sbEP.Y) / 2, (ebSP.Z + ebEP.Z) / 2 - (sbSP.Z + sbEP.Z) / 2).GetNormal();
// 3. 슬라브 치수 및 기타속성 입력 ( 현재는 상수 )
double slabWidthLeft = 300;
double slabWidthCenter = 300;
double slabWidthRight = 300;
double slabThickness = 100;
double ribThickness = 200;
double ribDistUpper = 50;
double ribDistLower = 30;
double ribInterval = ribDistUpper - ribDistLower;
double startOffset = 100;
contourPlate.Profile.ProfileString = (startBeamToEndBeamVector.GetLength() - startOffset * 2).ToString();
contourPlate.Material.MaterialString = "C24";
// 4. 슬라브 시작점 설정
// 1) 길이방향(일단은 startPoint점에서 시작하는걸로)
String direction = "정방향"; //사용자가 직접 선택. 정방향 or 역방향
TSG.Point slabStartPoint = new TSG.Point();
if (direction == "정방향")
{
slabStartPoint = startBeam.StartPoint;
}
else if (direction == "역방향")
{
slabStartPoint = startBeam.EndPoint;
startBeamLDirectionVector = startBeamLDirectionVector * -1;
}
// 2) 높이방향
double heightConstant = 0.0;
//depth type에 따른 슬라브 생성높이 변경
if (startBeam.Position.Depth == Position.DepthEnum.FRONT)
{
heightConstant = 1.0;
}
else if (startBeam.Position.Depth == Position.DepthEnum.MIDDLE)
{
heightConstant = 0.5;
}
slabStartPoint += startBeamHDirecitionVector * ((Methods.GetGirderHeight(startBeam) * heightConstant + slabThickness + ribThickness));
// 3) endBeam방향
slabStartPoint += startBeamToEndBeamDirectionVector * (startOffset);
// 5. 슬라브 포인트 입력
List <TSG.Point> pointList = new List <TSG.Point>();
pointList.Add(slabStartPoint);
pointList.Add(pointList[0] + (startBeamHDirecitionVector * slabThickness * -1));
pointList.Add(pointList[1] + (startBeamLDirectionVector * slabWidthLeft));
pointList.Add(pointList[2] + (startBeamLDirectionVector * ribInterval) + (startBeamHDirecitionVector * ribThickness * -1));
pointList.Add(pointList[3] + (startBeamLDirectionVector * ribDistLower));
pointList.Add(pointList[4] + (startBeamLDirectionVector * ribInterval) + (startBeamHDirecitionVector * ribThickness));
pointList.Add(pointList[5] + (startBeamLDirectionVector * slabWidthCenter));
pointList.Add(pointList[6] + (startBeamLDirectionVector * ribInterval) + (startBeamHDirecitionVector * ribThickness * -1));
pointList.Add(pointList[7] + (startBeamLDirectionVector * ribDistLower));
pointList.Add(pointList[8] + (startBeamLDirectionVector * ribInterval) + (startBeamHDirecitionVector * ribThickness));
pointList.Add(pointList[9] + (startBeamLDirectionVector * slabWidthRight));
pointList.Add(pointList[10] + (startBeamHDirecitionVector * slabThickness));
for (int i = 0; i <= 11; i++)
{
contourPlate.AddContourPoint(new ContourPoint(pointList[i], null));
}
// 4. 슬라브 깊이타입 결정
// 1) StartBeam 중앙에서 L,H Direction의 법선 벡터방향 으로 Line을 뻗어 EndBeam과 겹치는 부분이 있는지 확인
// 2) 겹치면 깊이타입 Front , 겹치지 않으면 Back
// StartBeam 중앙에서 L,H Direction의 법선 벡터(외적 결과값)
TSG.Vector crossResult = TSG.Vector.Cross(startBeamHDirecitionVector, startBeamLDirectionVector);
// 외적벡터의 연장선
TSG.Point extendedPoint = new TSG.Point(starBeamCenterPoint.X, starBeamCenterPoint.Y, starBeamCenterPoint.Z) + new TSG.Point(crossResult.X * 10000, crossResult.Y * 10000, crossResult.Z * 10000);
TSG.LineSegment centerLineSegment = new TSG.LineSegment(starBeamCenterPoint, extendedPoint);
//endBeam의 Plane 작성
TSG.Vector planeNormalVector = crossResult; //조건 중 startBeam과 endBeam이 평행하므로 평면을 구성하는 법선벡터 또한 같다.
TSG.GeometricPlane endBeamPlane = new TSG.GeometricPlane(endBeamCenterPoint, planeNormalVector);
//두 line이 겹치는지 확인하는 Point (겹치면 값이 있고 안겹치면 값이 없음)
TSG.Point isIntersect = TSG.Intersection.LineSegmentToPlane(centerLineSegment, endBeamPlane);
if (isIntersect != null) // endBeam이 오른쪽에 있을 때
{
if (direction == "정방향")
{
contourPlate.Position.Depth = Position.DepthEnum.BEHIND;
}
else if (direction == "역방향")
{
contourPlate.Position.Depth = Position.DepthEnum.FRONT;
}
}
else if (isIntersect == null) // endBeam이 오른쪽에 없을 때
{
if (direction == "정방향")
{
contourPlate.Position.Depth = Position.DepthEnum.FRONT;
}
else if (direction == "역방향")
{
contourPlate.Position.Depth = Position.DepthEnum.BEHIND;
}
}
bool result = false;
result = contourPlate.Insert();
currentModel.CommitChanges();
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
}
}
private void btn_createMainRebar_Click(object sender, EventArgs e)
{
//기본객체 생성
RebarGroup rebarGroup = new RebarGroup();
Picker picker = new Picker();
//부재선택
TSM.ModelObject mainpart = picker.PickObject(Picker.PickObjectEnum.PICK_ONE_PART, "철근을 삽입할 부재를 선택하세요.");
TSM.Beam Beam = mainpart as TSM.Beam;
rebarGroup.Father = Beam;
//Beam 프로퍼티 확인용
Solid solid = Beam.GetSolid();
if (solid != null)
{
EdgeEnumerator edgeEnumerator = solid.GetEdgeEnumerator();
int edgeCount = 0;
while (edgeEnumerator.MoveNext())
{
var edge = edgeEnumerator.Current as Edge;
if (edge != null)
{
Console.WriteLine("Start : " + edge.StartPoint.ToString());
Console.WriteLine("End : " + edge.EndPoint.ToString());
Console.WriteLine("Type : " + edge.Type.ToString());
edgeCount++;
}
}
Console.WriteLine("Edge count : " + edgeCount.ToString());
}
//철근 형태를 결정할 Point 선택
ArrayList shapePoints = picker.PickPoints(Picker.PickPointEnum.PICK_POLYGON, "철근 형태를 결정할 포인트를 선택하세요.");
TSM.Polygon polygon = new TSM.Polygon();
for (int i = 0; i < shapePoints.Count; i++)
{
polygon.Points.Add(shapePoints[i]);
}
rebarGroup.Polygons.Add(polygon);
//철근 생성 위치를 결정할 Point 선택
ArrayList locationPoints = picker.PickPoints(Picker.PickPointEnum.PICK_POLYGON, "철근 생성 위치를 결정할 포인트를 선택하세요.");
rebarGroup.StartPoint = (TSG.Point)locationPoints[0];
rebarGroup.EndPoint = (TSG.Point)locationPoints[1];
//RebarInfo 클래스에서 불러올 값
rebarGroup.Name = "Rebar";
rebarGroup.Size = "13";
rebarGroup.Grade = "SD400";
rebarGroup.RadiusValues.Add(60.00);
rebarGroup.Class = 11;
//Form에서 설정
rebarGroup.StartHook.Shape = RebarHookData.RebarHookShapeEnum.NO_HOOK;
rebarGroup.EndHook.Shape = RebarHookData.RebarHookShapeEnum.NO_HOOK;
rebarGroup.OnPlaneOffsets.Add(25.00);
rebarGroup.FromPlaneOffset = 25;
rebarGroup.StartPointOffsetValue = 25;
rebarGroup.EndPointOffsetValue = 25;
rebarGroup.SpacingType = BaseRebarGroup.RebarGroupSpacingTypeEnum.SPACING_TYPE_TARGET_SPACE;
rebarGroup.Spacings.Add(200);
rebarGroup.ExcludeType = BaseRebarGroup.ExcludeTypeEnum.EXCLUDE_TYPE_NONE;
rebarGroup.StirrupType = RebarGroup.RebarGroupStirrupTypeEnum.STIRRUP_TYPE_POLYGONAL;
if (!rebarGroup.Insert())
{
Console.WriteLine("insert failed");
}
else
{
model.CommitChanges();
}
}