public IEnumerator CoroutinePunchOutAndInitialize(MonoBehaviour caller, XZPolygon polygon, bool bKeepInterior, GameObject zeObject, string strName, string strLayer, CustomMesh customMesh, Material material, bool bCollider)
{
float T = Time.time;
yield return(null);
yield return(caller.StartCoroutine(PunchOutStep1(polygon)));
Debug.Log("(1)");
yield return(null);
Debug.Log("(2) Dt=" + (Time.time - T));
T = Time.time;
yield return(caller.StartCoroutine(PunchOutStep2(polygon)));
yield return(null);
Debug.Log("(3) Dt=" + (Time.time - T));
T = Time.time;
yield return(caller.StartCoroutine(PunchOutStep3(polygon, bKeepInterior)));
yield return(null);
Debug.Log("(4) Dt=" + (Time.time - T));
T = Time.time;
if (zeObject == null)
{
zeObject = new GameObject(strName);
zeObject.transform.parent = caller.transform;
zeObject.transform.localPosition = Vector3.zero;
zeObject.transform.localScale = Vector3.one;
zeObject.layer = LayerMask.NameToLayer(strLayer);
}
customMesh.AttachMeshTo(zeObject, material);
if (bCollider)
{
customMesh.AddMeshCollider(zeObject);
}
yield return(null);
Debug.Log("(5) Dt=" + (Time.time - T));
T = Time.time;
caller.gameObject.SendMessage("OnPunchOutDone", zeObject);
}
private IEnumerator PunchOutStep3(XZPolygon polygon, bool bKeepInterior)
{
Profiler.BeginSample("PunchOutStep3");
float fTimeWhenStartedChunk = Time.realtimeSinceStartup;
//*/
// (3) Now there are no more "border-crossing" triangles, they are all wholly outside or wholly inside.
// Remove the triangles inside (or ouside, depending on bKeepInterior )
for (int t = 0; t < mlTriangles.Count; t++)
{
// Coroutine time management
if (Time.realtimeSinceStartup - fTimeWhenStartedChunk > MAX_TIME_CHUNK)
{
// Enough done this frame, go on holiday
yield return(null);
// Back from holyday
fTimeWhenStartedChunk = Time.realtimeSinceStartup;
}
Triangle triangle = mlTriangles[t];
Vector3 vCenter = (triangle.mA.mvPos + triangle.mB.mvPos + triangle.mC.mvPos) / 3;
Profiler.BeginSample("IsInside");
bool bInside = polygon.Contains(vCenter);
Profiler.EndSample();
if (bInside != bKeepInterior)
{
// Cut out this triangle
Profiler.BeginSample("RemoveTriangle");
RemoveTriangle(t);
t--;
Profiler.EndSample();
}
}
//*/
Profiler.EndSample();
}
private IEnumerator PunchOutStep1(XZPolygon polygon)
{
Profiler.BeginSample("PunchOutStep1");
float fTimeWhenStartedChunk = Time.realtimeSinceStartup;
maVerticesUnderPolygonPoints = new Vertex[polygon.maPoints.Length - 1];
// (1) For each polygon point, determine which triangle it's in, and split that triangle into three such that the point is on a new vertex
for (int p = 0; p < polygon.maPoints.Length - 1; p++) //Length-1 because it's a closed polyline
{
// Coroutine time management
if (Time.realtimeSinceStartup - fTimeWhenStartedChunk > MAX_TIME_CHUNK)
{
// Enough done this frame, go on holiday
yield return(null);
// Back from holyday
fTimeWhenStartedChunk = Time.realtimeSinceStartup;
}
Vector3 vPoint = polygon.maPoints[p];
if (p > 0 && (vPoint - polygon.maPoints[p - 1]).magnitude < 0.0001f)
{
Debug.Log("Polygon has two very near points. Distance is " + (vPoint - polygon.maPoints[p - 1]).magnitude);
}
if (p > 0)
{
// Debug.DrawLine(polygon.maPoints[p - 1], polygon.maPoints[p], Color.yellow, 1000.0f);
}
for (int t = 0; t < mlTriangles.Count; t++)
{
Triangle triangle = mlTriangles[t];
Vertex P = null;
Vertex Q = null;
if (triangle.IsFarFromXZ(vPoint))
{
// NOP - Continue
}
else if (triangle.mA.IsUnder(vPoint) || triangle.mB.IsUnder(vPoint) || triangle.mC.IsUnder(vPoint))
{
// We are already over a vertex, yay
if (triangle.mA.IsUnder(vPoint))
{
maVerticesUnderPolygonPoints[p] = triangle.mA;
// Debug.DrawLine(triangle.mA.mvPos - 0.01f * Vector3.up, triangle.mA.mvPos + 0.01f * Vector3.up, Color.grey, 1000.0f);
}
else if (triangle.mB.IsUnder(vPoint))
{
maVerticesUnderPolygonPoints[p] = triangle.mB;
// Debug.DrawLine(triangle.mB.mvPos - 0.01f * Vector3.up, triangle.mB.mvPos + 0.01f * Vector3.up, Color.grey, 1000.0f);
}
else if (triangle.mC.IsUnder(vPoint))
{
maVerticesUnderPolygonPoints[p] = triangle.mC;
// Debug.DrawLine(triangle.mC.mvPos - 0.01f * Vector3.up, triangle.mC.mvPos + 0.01f * Vector3.up, Color.grey, 1000.0f);
}
break;
}
else if (triangle.BorderContainsXZ(vPoint, out P, out Q))
{
// We are on an edge
// P---------------R
// / \ triangleBis//
// / \ / /
// / \ / /
// / triangle \ / /
// S -_- - - - - -X /
// - _ \ /
// - _ \ /
// - Q
//
//Debug.Log ("p="+p+": Splitting edge");
// Compute where X is
Vector3 vPQ = Q.mvPos - P.mvPos;
vPQ.y = 0.0f;
Vector3 vPX = vPoint - P.mvPos;
vPX.y = 0.0f;
float fCutRatio = vPX.magnitude / vPQ.magnitude;
// Add new vertex
Vertex X = AddVertex(Vector3.Lerp(P.mvPos, Q.mvPos, fCutRatio));
#if UNITY_EDITOR
X.DEBUG_INFO = "added on edge in step1";
#endif
maVerticesUnderPolygonPoints[p] = X;
// Debug.DrawLine(X.mvPos - 0.01f * Vector3.up, X.mvPos + 0.01f * Vector3.up, Color.white, 1000.0f);
// Interpolate UV coordinates
X.mvUV = Vector2.Lerp(P.mvUV, Q.mvUV, fCutRatio);
//Get the point S
Vertex S = triangle.GetThirdCorner(P, Q);
// Before we kill triangle, check if there's a second triangle to subdivide
Triangle triangleBis = triangle.GetNeighbourTriangleBehind(P, Q);
// Supdivide triangle
RemoveTriangle(t);
bool bFlip = (Vector3.Cross(P.mvPos - S.mvPos, Q.mvPos - S.mvPos).y > 0);
AddTriangle(S, X, P, bFlip);
AddTriangle(S, Q, X, bFlip);
if (triangleBis != null)
{
Vertex R = triangleBis.GetThirdCorner(P, Q);
RemoveTriangle(triangleBis);
AddTriangle(P, X, R, bFlip);
AddTriangle(X, Q, R, bFlip);
}
break;
}
else if (triangle.ContainsXZ(vPoint))
{
//Debug.Log ("p="+p+": Splitting triangle");
// We have found the triangle
// B
// / \
// / | \
// / | \
// / | \
// / _ P' _ \
// /_ - - - _\
// A-------------------C
// Retrieve the existing vertices
Vertex A = triangle.mA;
Vertex B = triangle.mB;
Vertex C = triangle.mC;
// We want to project P vertically (not orthogonally) onto a point P' on the ABC plane.
// The problem is choosing the right altitude.
// If we set U = P-A, V = C-A, W = B-A, we are looking for lambda, my, such that P' = A + lambda V + my W has the same x and z coordinates as P.
// This comes back to resolving the linear equation system
//
// lambda V.x + my * W.x == U.x
// lambda V.z + my * W.z == U.z , or in matrix form
//
// [V.x W.x] ( lambda ) ( U.x )
// [V.z W.z] * ( my ) = ( U.z )
//
// We resolve for the vector on the left:
//
// ( lambda ) [V.x W.x]-1 ( U.x ) [ W.z -W.x] ( U.x )
// ( my ) = [V.z W.z] * ( U.z ) = 1/det * [-V.z V.x] * ( U.z )
//
// So all we have to do is invert a 2x2 matrix. That should not be a problem.
// Initialize U, V, W
Vector3 vU = vPoint - A.mvPos;
Vector3 vV = C.mvPos - A.mvPos;
Vector3 vW = B.mvPos - A.mvPos;
// Compute the determinant
float fDet = vV.x * vW.z - vV.z * vW.x;
if (fDet == 0.0f)
{
// Degenerated triangle
Debug.LogError("Degenerated triangle");
continue;
}
// Resolve for lambda and my
float fLambda = (1.0f / fDet) * (vW.z * vU.x - vW.x * vU.z);
float fMy = (1.0f / fDet) * (-vV.z * vU.x + vV.x * vU.z);
// Now we can apply lambda and my
Vector3 vPprime = A.mvPos + fLambda * vV + fMy * vW;
// Add a vertex at P'
Vertex newVertex = AddVertex(vPprime);
#if UNITY_EDITOR
newVertex.DEBUG_INFO = "added in triangle in step 1";
#endif
maVerticesUnderPolygonPoints[p] = newVertex;
// Debug.DrawLine(newVertex.mvPos - 0.01f * Vector3.up, newVertex.mvPos + 0.01f * Vector3.up, Color.black, 1000.0f);
// Interpolate UV coordinates
newVertex.mvUV = A.mvUV + fLambda * (C.mvUV - A.mvUV) + fMy * (B.mvUV - A.mvUV);
// Replace the triangle
RemoveTriangle(t);
AddTriangle(C, A, newVertex);
AddTriangle(A, B, newVertex);
AddTriangle(B, C, newVertex);
// Stop the inner loop
break;
}
}
}
Profiler.EndSample();
}
//==============================================================================================
//
// Punch out methods
//
//==============================================================================================
// Note on terminology:
// In the following algorithms, we will say that
// - A grid has VERTICES and TRIANGLES
// - A polygon has POINTS and SEGMENTS
// - A triangle has CORNERS and SIDES
public void PunchOut(XZPolygon polygon, bool bKeepInterior)
{
PunchOutStep1(polygon);
PunchOutStep2(polygon);
PunchOutStep3(polygon, bKeepInterior);
}
public void PunchOutAndInitialize(MonoBehaviour caller, XZPolygon polygon, bool bKeepInterior, GameObject zeObject, string strName, string strLayer, CustomMesh customMesh, Material material, bool bCollider)
{
caller.StartCoroutine(CoroutinePunchOutAndInitialize(caller, polygon, bKeepInterior, zeObject, strName, strLayer, customMesh, material, bCollider));
}
private IEnumerator PunchOutStep2(XZPolygon polygon)
{
Profiler.BeginSample("PunchOutStep2");
float fTimeWhenStartedChunk = Time.realtimeSinceStartup;
// (2) Create additional mesh lines corresponding to the polygon lines
int iSegmentIndex = 0;
Vertex currentVertex = FindVertexUnder(polygon.maPoints[0]);
int iSecurityCounter = 0;
while (iSegmentIndex < polygon.maPoints.Length - 1 && iSecurityCounter++ < 10000)
{
// Coroutine time management
if (Time.realtimeSinceStartup - fTimeWhenStartedChunk > MAX_TIME_CHUNK)
{
// Enough done this frame, go on holiday
yield return(null);
// Back from holyday
fTimeWhenStartedChunk = Time.realtimeSinceStartup;
}
// P---------------R
// / \ triangle2 //
// / \ / /
// \ / \ / /
// \ / triangle1 \ / /
// currentVertex * -------------X-- /
// |\ ' - _ \ /
// | \ - _ \ /
// - Q
//
Vector3 vPosition = currentVertex.mvPos;
Vector3 vDirection = polygon.maPoints[iSegmentIndex + 1] - vPosition;
// A saveguard for some nasty infinitely-go-and-fro-between-two-vertices cases
while (Vector3.Dot(vDirection, polygon.maPoints[iSegmentIndex + 1] - polygon.maPoints[iSegmentIndex]) < 0)
{
Debug.Log("Wait, wait, we're going into the wrong direction");
iSegmentIndex++;
vDirection = polygon.maPoints[iSegmentIndex + 1] - vPosition;
}
vDirection.y = 0.0f;
if (iSecurityCounter == 9999)
{
Debug.DrawLine(vPosition - Vector3.up, vPosition + Vector3.up, Color.magenta, 1000.0f);
Debug.Log("Endless loop?");
Debug.Break();
}
if (iSecurityCounter > 9980)
{
Debug.DrawLine(vPosition - Vector3.up * 0.5f, vPosition + Vector3.up * 0.5f, Color.white, 1000.0f);
currentVertex.DebugLogInfo("Current vertex", Vector3.zero);
}
if (vDirection * 1.0e6f == Vector3.zero)
{
Debug.LogError("vDirection is zero. ");
}
if (iSegmentIndex + 1 < maVerticesUnderPolygonPoints.Length && maVerticesUnderPolygonPoints[iSegmentIndex + 1].IsNeighbourOf(currentVertex))
{
currentVertex = maVerticesUnderPolygonPoints[iSegmentIndex + 1];
iSegmentIndex++;
}
else
{
// Check if there is a neighbor vertex just in this direction
Vertex N = currentVertex.GetNeighbourVertexInDirection(vDirection);
if (N != null)
{
// No subdivision required, just procede to vertex N
if (N.IsUnder(polygon.maPoints[iSegmentIndex + 1]))
{
// We reach a corner
iSegmentIndex++;
}
currentVertex = N;
}
else
{
// Search the vertices P, Q and the triangles triangle1 and triangle2
Vertex P;
Vertex Q;
Triangle triangle1 = currentVertex.GetAdjacentTriangleInDirection(vDirection, out P, out Q);
if (triangle1 == null)
{
Debug.LogError("Couldn't find triangle under polygon.");
currentVertex.DebugLogInfo("Current vertex ", Vector3.zero);
currentVertex.DebugDrawAdjacentTriangles(Color.red);
iSegmentIndex = polygon.maPoints.Length;
break;
}
Triangle triangle2 = triangle1.GetNeighbourTriangleBehind(P, Q);
if (triangle2 == null)
{
Debug.LogError("Couldn't find triangle 'behind' the one under polygon");
currentVertex.DebugDrawAdjacentTriangles(Color.yellow);
iSegmentIndex = polygon.maPoints.Length;
break;
}
Vertex R = triangle2.GetThirdCorner(P, Q);
//Compute X
float fCutRatio;
Vector3 vX = GeometryToolbox.CutSegmentByLine(P.mvPos, Q.mvPos, vPosition, vPosition + vDirection, out fCutRatio);
// Sometimes the cut ratio is very close to 0 or 1, even if this should theoretically not happen. In this case we do the same thing as above in the case "N != null"
if (fCutRatio < 0.001f)
{
// Don't need a new point, P is fine
if (P.IsUnder(polygon.maPoints[iSegmentIndex + 1]))
{
// We reach a corner
iSegmentIndex++;
}
currentVertex = P;
}
else if (fCutRatio > 0.999f)
{
// Same for Q
if (Q.IsUnder(polygon.maPoints[iSegmentIndex + 1]))
{
// We reach a corner
iSegmentIndex++;
}
currentVertex = Q;
}
else
{
// Add vertex
Vertex X = AddVertex(vX);
X.mvUV = Vector2.Lerp(P.mvUV, Q.mvUV, fCutRatio);
#if UNITY_EDITOR
X.DEBUG_INFO = "added on line in step 2, fCutRatio = " + fCutRatio;
#endif
// Replace triangle1
RemoveTriangle(triangle1);
AddTriangle(currentVertex, X, P);
AddTriangle(currentVertex, Q, X);
// Replace triangle2
RemoveTriangle(triangle2);
AddTriangle(X, Q, R);
AddTriangle(X, R, P);
// Go on
if ((currentVertex.mvPos - P.mvPos).magnitude < 0.00001f)
{
//currentVertex vertex is very near to P - goto on.
currentVertex = P;
}
else if ((currentVertex.mvPos - Q.mvPos).magnitude < 0.00001f)
{
// Idem for Q
currentVertex = Q;
}
else if (R.IsUnder(polygon.maPoints[iSegmentIndex + 1]))
{
// We reach a corner
currentVertex = R;
iSegmentIndex++;
}
else
{
currentVertex = X;
}
while (iSegmentIndex + 1 < polygon.maPoints.Length && currentVertex.IsUnder(polygon.maPoints[iSegmentIndex + 1]))
{
iSegmentIndex++;
}
}
}
}
// Debug.DrawLine( vPosition, currentVertex.mvPos, Color.red, 1000.0f);
}
// maVerticesUnderPolygonPoints is not needed anymore
maVerticesUnderPolygonPoints = new Vertex[0];
Profiler.EndSample();
}