public void AutoDrawing(SldWorks swApp, ModuleTree tree, string projectPath)
{
//创建项目模型存放地址
string itemPath = projectPath + @"\" + tree.Module + "-" + tree.CategoryName;
if (!Directory.Exists(itemPath))
{
Directory.CreateDirectory(itemPath);
}
else
{
DialogResult result =
MessageBox.Show("模型文件夹" + itemPath + "存在，如果之前pack已经执行过，将不执行pack过程而是直接修改模型，如果要继续请点击YES，否请点击No中断作图", "提示信息",
MessageBoxButtons.YesNo);
if (result == DialogResult.No)
{
return;
}
}
//Pack的后缀
string suffix = tree.Module + "-" + tree.ODPNo.Substring(tree.ODPNo.Length - 6);
//判断文件是否存在，如果存在将不执行pack，如果不存在则执行pack
//packango后需要接收打包完成的地址，参数为后缀
string packedAssyPath = itemPath + @"\" + tree.CategoryName.ToLower() + "_" + suffix + ".sldasm";
if (!File.Exists(packedAssyPath))
{
packedAssyPath = CommonFunc.PackAndGoFunc(suffix, swApp, tree.ModelPath, itemPath);
}
//查询参数
UCJDB800 item = (UCJDB800)objUCJDB800Service.GetModelByModuleTreeId(tree.ModuleTreeId.ToString());
swApp.CommandInProgress = true; //告诉SolidWorks，现在是用外部程序调用命令
int warnings = 0;
int errors = 0;
suffix = "_" + suffix;//后缀
ModelDoc2 swModel = default(ModelDoc2);
ModelDoc2 swPart = default(ModelDoc2);
AssemblyDoc swAssy = default(AssemblyDoc);
Component2 swComp;
Feature swFeat = default(Feature);
object configNames = null;
ModelDocExtension swModelDocExt = default(ModelDocExtension);
bool status = false;
string compReName = string.Empty;
//打开Pack后的模型
swModel = swApp.OpenDoc6(packedAssyPath, (int)swDocumentTypes_e.swDocASSEMBLY,
(int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2;
swAssy = swModel as AssemblyDoc; //装配体
string assyName = swModel.GetTitle().Substring(0, swModel.GetTitle().Length - 7); //获取装配体名称
swModelDocExt = (ModelDocExtension)swModel.Extension;
//打开装配体后必须重建，使Pack后的零件名都更新到带后缀的状态，否则程序出错
swModel.ForceRebuild3(true);
//TopOnly参数设置成true，只重建顶层，不重建零件内部
/*注意SolidWorks单位是m，计算是应当/1000m
* 整形与整形运算得出的结果仍然时整形，1640 / 1000m结果为0，因此必须将其中一个转化成decimal型，使用后缀m就可以了
* (int)不进行四舍五入，Convert.ToInt32会四舍五入
*/
//-----------计算中间值，----------
int fcNo = (int)((item.Length - item.FCSideLeft - item.FCSideRight) / 499m) - item.FCBlindNo;
try
{
//----------Top Level----------
//判断FC数量，FC侧板长度
if (item.FCBlindNo > 0)
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0107[BP-500]{500}-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0107[BP-500]{500}-5"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swFeat = swAssy.FeatureByName("LocalLPattern4");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swModel.Parameter("D1@LocalLPattern4").SystemValue = item.FCBlindNo; //D1阵列数量,D3阵列距离
swModel.Parameter("D1@Distance29").SystemValue = item.FCSideLeft / 1000m;
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0107[BP-500]{500}-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0107[BP-500]{500}-5"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swFeat = swAssy.FeatureByName("LocalLPattern4");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "UCJ FC COMBI-12"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "UCJ FC COMBI-15"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swFeat = swAssy.FeatureByName("LocalLPattern3");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swModel.Parameter("D1@LocalLPattern3").SystemValue = fcNo; //D1阵列数量,D3阵列距离
swModel.Parameter("D1@Distance35").SystemValue = (item.FCSideLeft + 500m * item.FCBlindNo) / 1000m;
//----------HCL----------
if (item.LightType == "HCL")
{
//灯腔
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0054-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D1@Linear austragen1").SystemValue = item.Length / 1000m;
swFeat = swComp.FeatureByName("LIGHT T8");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("FC SUPPORT");
swFeat.SetSuppression2(2, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("FC SUPPORT B");
swFeat.SetSuppression2(2, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("JAP LED M8");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
if (item.LightCable == "LEFT")
{
swFeat = swComp.FeatureByName("LIGHT HOLE LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LIGHT HOLE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else if (item.LightCable == "RIGHT")
{
swFeat = swComp.FeatureByName("LIGHT HOLE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LIGHT HOLE RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("LIGHT HOLE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LIGHT HOLE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0066-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0066-2"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0069-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.Length - 5m) / 1000m;
swPart.Parameter("D1@LPattern1").SystemValue = fcNo + item.FCBlindNo;
swPart.Parameter("D3@Sketch6").SystemValue = (item.FCSideLeft + 250m) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0071-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.Length - 5m) / 1000m;
swPart.Parameter("D1@LPattern1").SystemValue = fcNo + item.FCBlindNo;
swPart.Parameter("D3@Sketch6").SystemValue = (item.FCSideLeft + 250m) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0116-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0114-3"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0114-4"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0145-2"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0161-2"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
}
else
{
//灯腔
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0054-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0066-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0066-2"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0069-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0071-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0116-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D1@Linear austragen1").SystemValue = item.Length / 1000m;
swFeat = swComp.FeatureByName("LIGHT T8");
if (item.LightType == "T8")
{
swFeat.SetSuppression2(2, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("FC SUPPORT");
swFeat.SetSuppression2(2, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("FC SUPPORT B");
swFeat.SetSuppression2(2, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("JAP LED M8");
if (item.Japan == "YES")
{
swFeat.SetSuppression2(2, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
if (item.LightCable == "LEFT")
{
swFeat = swComp.FeatureByName("LIGHT HOLE LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LIGHT HOLE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else if (item.LightCable == "RIGHT")
{
swFeat = swComp.FeatureByName("LIGHT HOLE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LIGHT HOLE RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("LIGHT HOLE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LIGHT HOLE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0114-3"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0114-4"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0145-2"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.Length - 5m) / 1000m;
swPart.Parameter("D1@LPattern1").SystemValue = fcNo + item.FCBlindNo;
swPart.Parameter("D3@Sketch6").SystemValue = (item.FCSideLeft + 250m) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0161-2"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.Length - 5m) / 1000m;
swPart.Parameter("D1@LPattern1").SystemValue = fcNo + item.FCBlindNo;
swPart.Parameter("D3@Sketch6").SystemValue = (item.FCSideLeft + 250m) / 1000m;
}
//----------UV灯----------
if (item.UVType == "LONG")
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "CEILING UVRACK SPECIAL 4S-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "CEILING UVRACK SPECIAL 4L-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "CEILING UVRACK SPECIAL 4S-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "CEILING UVRACK SPECIAL 4L-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
}
//----------油网侧板----------
switch (item.FCSide)
{
case "LEFT":
//重命名装配体内部
compReName = "FNCE0108[BP-" + tree.Module + ".1]{" + (int)(item.FCSideLeft - fcNo * 1m - 4m) + "}";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0108[BP-]{}-2") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-2" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-2");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideLeft - fcNo * 1m - 4m) / 1000m;
}
//重命名装配体内部
compReName = "FNCE0136[BP-" + tree.Module + ".2]{" + (int)(item.FCSideLeft - fcNo * 1m - 4m) + "}";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0136[BP-]{}-3") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-3" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-3");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideLeft - fcNo * 1m - 4m) / 1000m;
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0109[BP-]{}-3"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0162[BP-]{}-4"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
break;
case "RIGHT":
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0108[BP-]{}-2"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0136[BP-]{}-3"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
//重命名装配体内部
compReName = "FNCE0109[BP-" + tree.Module + ".1]{" + (int)(item.FCSideRight - fcNo * 1m - 4m) + "}";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0109[BP-]{}-3") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-3" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-3");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideRight - fcNo * 1m - 4m) / 1000m;
}
//重命名装配体内部
compReName = "FNCE0162[BP-" + tree.Module + ".2]{" + (int)(item.FCSideRight - fcNo * 1m - 4m) + "}";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0162[BP-]{}-4") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-4" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-4");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideRight - fcNo * 1m - 4m) / 1000m;
}
break;
case "BOTH":
//重命名装配体内部
compReName = "FNCE0108[BP-" + tree.Module + ".1]{" + (int)(item.FCSideLeft - fcNo * 1m - 2m) + "}";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0108[BP-]{}-2") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-2" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-2");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideLeft - fcNo * 1m - 2m) / 1000m;
}
//重命名装配体内部
compReName = "FNCE0136[BP-" + tree.Module + ".2]{" + (int)(item.FCSideLeft - fcNo * 1m - 2m) + "}";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0136[BP-]{}-3") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-3" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-3");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideLeft - fcNo * 1m - 2m) / 1000m;
}
//重命名装配体内部
compReName = "FNCE0109[BP-" + tree.Module + ".3]{" + (int)(item.FCSideRight - fcNo * 1m - 2m) + "}";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0109[BP-]{}-3") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-3" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-3");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideRight - fcNo * 1m - 2m) / 1000m;
}
//重命名装配体内部
compReName = "FNCE0162[BP-" + tree.Module + ".4]{" + (int)(item.FCSideRight - fcNo * 1m - 2m) + "}";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0162[BP-]{}-4") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-4" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-4");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideRight - fcNo * 1m - 2m) / 1000m;
}
break;
default:
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0108[BP-]{}-3"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0136[BP-]{}-3"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0109[BP-]{}-3"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0162[BP-]{}-4"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
break;
}
//----------日本项目需要压缩零件----------
if (item.Japan == "YES")
{
//吊装垫片
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0070-10"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swFeat = swAssy.FeatureByName("LocalLPattern22");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//排风脖颈
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "EXSPIGOT-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
//排风腔
//重命名装配体内部
compReName = "FNCE0141[UCJDB800-" + tree.Module + "]{" + (int)item.Length + "}";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0141-1") + "@" + assyName,
"COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false,
0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-1");
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D1@Linear austragen1").SystemValue = item.Length / 1000m;
swFeat = swComp.FeatureByName("EX");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("Cut-Extrude4");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LIGHT HOLE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LIGHT HOLE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANSULSIDE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANSULSIDE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC4");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC5");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("MA-TAB");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
if (item.MARVEL == "YES")
{
swFeat = swComp.FeatureByName("MA-NTC");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("MA-NTC");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
}
else
{
//吊装垫片
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0070-10"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swFeat = swAssy.FeatureByName("LocalLPattern2");
swFeat.SetSuppression2(2, 2, configNames); //参数1：1解压，0压缩
//排风脖颈
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "EXSPIGOT-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0019-1"));
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@基体-法兰1").SystemValue = (item.ExLength + 50m) / 1000m;
swPart.Parameter("D3@草图1").SystemValue = item.ExHeight / 1000m;
swFeat = swComp.FeatureByName("ANSUL");
if (item.ANSUL == "YES")
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0020-1"));
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@基体-法兰1").SystemValue = (item.ExLength + 50m) / 1000m;
swPart.Parameter("D3@草图1").SystemValue = item.ExHeight / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0047-1"));
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@基体-法兰1").SystemValue = item.ExWidth / 1000m;
swPart.Parameter("D3@草图1").SystemValue = item.ExHeight / 1000m;
swFeat = swComp.FeatureByName("ANDTEC");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0048-2"));
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@基体-法兰1").SystemValue = item.ExWidth / 1000m;
swPart.Parameter("D3@草图1").SystemValue = item.ExHeight / 1000m;
swFeat = swComp.FeatureByName("ANDTEC");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//排风腔
//重命名装配体内部
compReName = "FNCE0141[UCJDB800-" + tree.Module + "]{" + (int)item.Length + "}";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0141-1") + "@" + assyName,
"COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false,
0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-1");
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D1@Linear austragen1").SystemValue = item.Length / 1000m;
swFeat = swComp.FeatureByName("EX");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("Cut-Extrude4");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("MA-TAB");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D3@Sketch3").SystemValue = item.ExRightDis / 1000m;
swPart.Parameter("D1@Sketch3").SystemValue = item.ExLength / 1000m;
swPart.Parameter("D2@Sketch3").SystemValue = item.ExWidth / 1000m;
if (item.ANSUL == "YES")
{
//侧喷
if (item.ANSide == "LEFT")
{
swFeat = swComp.FeatureByName("ANSULSIDE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANSULSIDE LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else if (item.ANSide == "RIGHT")
{
swFeat = swComp.FeatureByName("ANSULSIDE RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANSULSIDE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("ANSULSIDE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANSULSIDE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//探测器
swFeat = swComp.FeatureByName("ANDTEC1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC4");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC5");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
if (item.ANDetectorNo > 0)
{
swFeat = swComp.FeatureByName("ANDTEC1");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D3@Sketch9").SystemValue = item.ANDetectorDis1 / 1000m;
if (item.ANDetectorEnd == "RIGHT" ||
(item.ANDetectorEnd == "LEFT" && item.ANDetectorNo == 1))
{
swPart.Parameter("D1@Sketch9").SystemValue = 195m / 1000m;
}
else
{
swPart.Parameter("D1@Sketch9").SystemValue = 175m / 1000m;
}
}
if (item.ANDetectorNo > 1)
{
swFeat = swComp.FeatureByName("ANDTEC2");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch15").SystemValue = item.ANDetectorDis2 / 1000m;
if (item.ANDetectorEnd == "LEFT" && item.ANDetectorNo == 2)
{
swPart.Parameter("D2@Sketch15").SystemValue = 195m / 1000m;
}
else
{
swPart.Parameter("D2@Sketch15").SystemValue = 175m / 1000m;
}
}
if (item.ANDetectorNo > 2)
{
swFeat = swComp.FeatureByName("ANDTEC3");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch16").SystemValue = item.ANDetectorDis3 / 1000m;
if (item.ANDetectorEnd == "LEFT" && item.ANDetectorNo == 3)
{
swPart.Parameter("D2@Sketch16").SystemValue = 195m / 1000m;
}
else
{
swPart.Parameter("D2@Sketch16").SystemValue = 175m / 1000m;
}
}
if (item.ANDetectorNo > 3)
{
swFeat = swComp.FeatureByName("ANDTEC4");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch17").SystemValue = item.ANDetectorDis4 / 1000m;
if (item.ANDetectorEnd == "LEFT" && item.ANDetectorNo == 4)
{
swPart.Parameter("D2@Sketch17").SystemValue = 195m / 1000m;
}
else
{
swPart.Parameter("D2@Sketch17").SystemValue = 175m / 1000m;
}
}
if (item.ANDetectorNo > 4)
{
swFeat = swComp.FeatureByName("ANDTEC5");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch18").SystemValue = item.ANDetectorDis5 / 1000m;
if (item.ANDetectorEnd == "LEFT" && item.ANDetectorNo == 5)
{
swPart.Parameter("D2@Sketch18").SystemValue = 195m / 1000m;
}
else
{
swPart.Parameter("D2@Sketch18").SystemValue = 175m / 1000m;
}
}
}
else
{
swFeat = swComp.FeatureByName("ANSULSIDE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANSULSIDE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC4");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC5");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
if (item.MARVEL == "YES")
{
swFeat = swComp.FeatureByName("MA-NTC");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("MA-NTC");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
if (item.LightCable == "LEFT")
{
swFeat = swComp.FeatureByName("LIGHT HOLE LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LIGHT HOLE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else if (item.LightCable == "RIGHT")
{
swFeat = swComp.FeatureByName("LIGHT HOLE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LIGHT HOLE RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("LIGHT HOLE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LIGHT HOLE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//UV灯
if (item.UVType == "LONG")
{
swFeat = swComp.FeatureByName("UV L");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D5@Sketch4").SystemValue = (item.ExRightDis - 800m) / 1000m;
swPart.Parameter("D8@Sketch4").SystemValue = (item.ExRightDis - 600m) / 1000m;
swFeat = swComp.FeatureByName("UV S");
swFeat.SetSuppression2(0, 2, configNames);
}
else
{
swFeat = swComp.FeatureByName("UV S");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D3@Sketch11").SystemValue = (item.ExRightDis - 446.5m) / 1000m;
swPart.Parameter("D8@Sketch11").SystemValue = (item.ExRightDis - 300m) / 1000m;
swFeat = swComp.FeatureByName("UV L");
swFeat.SetSuppression2(0, 2, configNames);
}
}
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0056-1"));
swPart = swComp.GetModelDoc2();//打开零件
swPart.Parameter("D1@Skizze1").SystemValue = item.Length / 1000m;
//----------SSP灯板支撑条----------
if (item.SSPType == "DOME")
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0036-4"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0036-5"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0035-6"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0035-5"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Sketch1").SystemValue = item.Length / 1000m;
if (item.Gutter == "YES")
{
swModel.Parameter("D1@Distance27").SystemValue = item.GutterWidth / 1000m;
swModel.Parameter("D1@Distance36").SystemValue = item.GutterWidth / 1000m;
}
else
{
swModel.Parameter("D1@Distance27").SystemValue = 0.5m / 1000m;
swModel.Parameter("D1@Distance36").SystemValue = 0.5m / 1000m;
}
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0036-4"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0036-5"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Sketch1").SystemValue = item.Length / 1000m;
if (item.Gutter == "YES")
{
swModel.Parameter("D1@Distance28").SystemValue = item.GutterWidth / 1000m;
swModel.Parameter("D1@Distance37").SystemValue = item.GutterWidth / 1000m;
}
else
{
swModel.Parameter("D1@Distance28").SystemValue = 0.5m / 1000m;
swModel.Parameter("D1@Distance37").SystemValue = 0.5m / 1000m;
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0035-6"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0035-5"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
}
swModel.ForceRebuild3(true); //设置成true，直接更新顶层，速度很快，设置成false，每个零件都会更新，很慢
swModel.Save(); //保存，很耗时间
swApp.CloseDoc(packedAssyPath); //关闭，很快
}
catch (Exception ex)
{
throw new Exception(packedAssyPath + "作图过程发生异常，详细：" + ex.Message);
}
finally
{
swApp.CommandInProgress = false; //及时关闭外部命令调用，否则影响SolidWorks的使用
}
}
public void AutoDrawing(SldWorks swApp, ModuleTree tree, string projectPath)
{
//创建项目模型存放地址
string itemPath = projectPath + @"\" + tree.Module + "-" + tree.CategoryName;
if (!Directory.Exists(itemPath))
{
Directory.CreateDirectory(itemPath);
}
else
{
DialogResult result =
MessageBox.Show("模型文件夹" + itemPath + "存在，如果之前pack已经执行过，将不执行pack过程而是直接修改模型，如果要继续请点击YES，否请点击No中断作图", "提示信息",
MessageBoxButtons.YesNo);
if (result == DialogResult.No)
{
return;
}
}
//Pack的后缀
string suffix = tree.Module + "-" + tree.ODPNo.Substring(tree.ODPNo.Length - 6);
//判断文件是否存在，如果存在将不执行pack，如果不存在则执行pack
//packango后需要接收打包完成的地址，参数为后缀
string packedAssyPath = itemPath + @"\" + tree.CategoryName.ToLower() + "_" + suffix + ".sldasm";
if (!File.Exists(packedAssyPath))
{
packedAssyPath = CommonFunc.PackAndGoFunc(suffix, swApp, tree.ModelPath, itemPath);
}
//查询参数
LLEDS item = (LLEDS)objLLEDSService.GetModelByModuleTreeId(tree.ModuleTreeId.ToString());
swApp.CommandInProgress = true; //告诉SolidWorks，现在是用外部程序调用命令
int warnings = 0;
int errors = 0;
suffix = "_" + suffix;//后缀
ModelDoc2 swModel = default(ModelDoc2);
ModelDoc2 swPart = default(ModelDoc2);
AssemblyDoc swAssy = default(AssemblyDoc);
Component2 swComp;
Feature swFeat = default(Feature);
object configNames = null;
ModelDocExtension swModelDocExt = default(ModelDocExtension);
bool status = false;
string compReName = string.Empty;
//打开Pack后的模型
swModel = swApp.OpenDoc6(packedAssyPath, (int)swDocumentTypes_e.swDocASSEMBLY,
(int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2;
swAssy = swModel as AssemblyDoc; //装配体
string assyName = swModel.GetTitle().Substring(0, swModel.GetTitle().Length - 7); //获取装配体名称
swModelDocExt = (ModelDocExtension)swModel.Extension;
//打开装配体后必须重建，使Pack后的零件名都更新到带后缀的状态，否则程序出错
swModel.ForceRebuild3(true);
//TopOnly参数设置成true，只重建顶层，不重建零件内部
/*注意SolidWorks单位是m，计算是应当/1000m
* 整形与整形运算得出的结果仍然时整形，1640 / 1000m结果为0，因此必须将其中一个转化成decimal型，使用后缀m就可以了
* (int)不进行四舍五入，Convert.ToInt32会四舍五入
*/
//-----------计算中间值，----------
int stdPanelNo = (int)((item.Length - 300.5m) / 1500m);//1500+300直接做成一块
decimal sideLength = item.Length - stdPanelNo * 1500m;
int ledNo = (int)((sideLength - 300m) / 500m);
try
{
//----------Top Level----------
swModel.Parameter("D1@Distance3").SystemValue = item.Length / 1000m;
//----------边缘板----------
//重命名装配体内部
compReName = "FNCL0023[LLEDS-" + tree.Module + "]{" + (int)sideLength + "}";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCL0023[LLEDS-]{}-2") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-2" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-2");
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Skizze1").SystemValue = sideLength / 1000m;
swFeat = swComp.FeatureByName("LPattern1");
if (ledNo > 0)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@LPattern1").SystemValue = ledNo + 1;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
//----------标准板----------
if (stdPanelNo > 0)
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCL0022[LLEDS-STD]{1483}-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600003-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCL0022[LLEDS-STD]{1483}-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600003-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
}
swFeat = swAssy.FeatureByName("LocalLPattern1");
if (stdPanelNo > 1)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swModel.Parameter("D1@LocalLPattern1").SystemValue = stdPanelNo;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swModel.ForceRebuild3(true); //设置成true，直接更新顶层，速度很快，设置成false，每个零件都会更新，很慢
swModel.Save(); //保存，很耗时间
swApp.CloseDoc(packedAssyPath); //关闭，很快
}
catch (Exception ex)
{
throw new Exception(packedAssyPath + "作图过程发生异常，详细：" + ex.Message);
}
finally
{
swApp.CommandInProgress = false; //及时关闭外部命令调用，否则影响SolidWorks的使用
}
}
public void AutoDrawing(SldWorks swApp, ModuleTree tree, string projectPath)
{
//创建项目模型存放地址
string itemPath = projectPath + @"\" + tree.Module + "-" + tree.CategoryName;
if (!Directory.Exists(itemPath))
{
Directory.CreateDirectory(itemPath);
}
else
{
DialogResult result =
MessageBox.Show("模型文件夹" + itemPath + "存在，如果之前pack已经执行过，将不执行pack过程而是直接修改模型，如果要继续请点击YES，否请点击No中断作图", "提示信息",
MessageBoxButtons.YesNo);
if (result == DialogResult.No)
{
return;
}
}
//Pack的后缀
string suffix = tree.Module + "-" + tree.ODPNo.Substring(tree.ODPNo.Length - 6);
//判断文件是否存在，如果存在将不执行pack，如果不存在则执行pack
//packango后需要接收打包完成的地址，参数为后缀
string packedAssyPath = itemPath + @"\" + tree.CategoryName.ToLower() + "_" + suffix + ".sldasm";
if (!File.Exists(packedAssyPath))
{
packedAssyPath = CommonFunc.PackAndGoFunc(suffix, swApp, tree.ModelPath, itemPath);
}
//查询参数
KCJSB265 item = (KCJSB265)objKCJSB265Service.GetModelByModuleTreeId(tree.ModuleTreeId.ToString());
swApp.CommandInProgress = true; //告诉SolidWorks，现在是用外部程序调用命令
int warnings = 0;
int errors = 0;
suffix = "_" + suffix;//后缀
ModelDoc2 swModel = default(ModelDoc2);
ModelDoc2 swPart = default(ModelDoc2);
AssemblyDoc swAssy = default(AssemblyDoc);
Component2 swComp;
Feature swFeat = default(Feature);
object configNames = null;
ModelDocExtension swModelDocExt = default(ModelDocExtension);
bool status = false;
string compReName = string.Empty;
//打开Pack后的模型
swModel = swApp.OpenDoc6(packedAssyPath, (int)swDocumentTypes_e.swDocASSEMBLY,
(int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2;
swAssy = swModel as AssemblyDoc; //装配体
string assyName = swModel.GetTitle().Substring(0, swModel.GetTitle().Length - 7); //获取装配体名称
swModelDocExt = (ModelDocExtension)swModel.Extension;
//打开装配体后必须重建，使Pack后的零件名都更新到带后缀的状态，否则程序出错
swModel.ForceRebuild3(true);
//TopOnly参数设置成true，只重建顶层，不重建零件内部
/*注意SolidWorks单位是m，计算是应当/1000m
* 整形与整形运算得出的结果仍然时整形，1640 / 1000m结果为0，因此必须将其中一个转化成decimal型，使用后缀m就可以了
* (int)不进行四舍五入，Convert.ToInt32会四舍五入
*/
//-----------计算中间值，----------
int fcNo = (int)((item.Length - item.FCSideLeft - item.FCSideRight) / 499m) - item.FCBlindNo;
try
{
//----------Top Level----------
//判断FC数量，FC侧板长度
if (item.FCBlindNo > 0)
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0107[BP-500]{500}-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swFeat = swAssy.FeatureByName("LocalLPattern3");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swModel.Parameter("D1@LocalLPattern3").SystemValue = item.FCBlindNo; //D1阵列数量,D3阵列距离
swModel.Parameter("D1@Distance11").SystemValue = item.FCSideLeft / 1000m;
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0107[BP-500]{500}-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swFeat = swAssy.FeatureByName("LocalLPattern3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//判断FC/KSA
if (item.FCType == "KSA")
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5202040401-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swFeat = swAssy.FeatureByName("LocalLPattern4");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swModel.Parameter("D1@LocalLPattern4").SystemValue = fcNo; //D1阵列数量,D3阵列距离
swModel.Parameter("D1@Distance9").SystemValue = (item.FCSideLeft + 500m * item.FCBlindNo) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "KCJ FC FILTER-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swFeat = swAssy.FeatureByName("LocalLPattern2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "KCJ FC FILTER-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swFeat = swAssy.FeatureByName("LocalLPattern2");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swModel.Parameter("D1@LocalLPattern2").SystemValue = fcNo; //D1阵列数量,D3阵列距离
swModel.Parameter("D1@Distance10").SystemValue = (item.FCSideLeft + 500m * item.FCBlindNo) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5202040401-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swFeat = swAssy.FeatureByName("LocalLPattern4");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//----------油网侧板----------
switch (item.FCSide)
{
case "LEFT":
//重命名装配体内部
if (item.FCType == "KSA")
{
compReName = "FNCE0108[BP-" + tree.Module + "]{" + (int)(item.FCSideLeft + fcNo * 2.5m) + "}";
}
else
{
compReName = "FNCE0108[BP-" + tree.Module + "]{" + (int)(item.FCSideLeft - 4m) + "}";
}
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0108[BP-]{}-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-1");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
if (item.FCType == "KSA")
{
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideLeft + fcNo * 2.5m) / 1000m;
}
else
{
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideLeft - 4m) / 1000m;
}
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0109[BP-]{}-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
break;
case "RIGHT":
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0108[BP-]{}-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
//重命名装配体内部
if (item.FCType == "KSA")
{
compReName = "FNCE0109[BP-" + tree.Module + "]{" + (int)(item.FCSideRight + fcNo * 2.5m) + "}";
}
else
{
compReName = "FNCE0109[BP-" + tree.Module + "]{" + (int)(item.FCSideRight - 4m) + "}";
}
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0109[BP-]{}-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-1");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
if (item.FCType == "KSA")
{
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideRight + fcNo * 2.5m) / 1000m;
}
else
{
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideRight - 4m) / 1000m;
}
}
break;
case "BOTH":
//重命名装配体内部
if (item.FCType == "KSA")
{
compReName = "FNCE0108[BP-" + tree.Module + ".1]{" + (int)(item.FCSideLeft + fcNo * 1.25m) + "}";
}
else
{
compReName = "FNCE0108[BP-" + tree.Module + "]{" + (int)(item.FCSideLeft - 2m) + "}";
}
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0108[BP-]{}-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-1");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
if (item.FCType == "KSA")
{
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideLeft + fcNo * 1.25m) / 1000m;
}
else
{
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideLeft - 2m) / 1000m;
}
}
//重命名装配体内部
if (item.FCType == "KSA")
{
compReName = "FNCE0109[BP-" + tree.Module + ".2]{" + (int)(item.FCSideRight + fcNo * 1.25m) + "}";
}
else
{
compReName = "FNCE0109[BP-" + tree.Module + "]{" + (int)(item.FCSideRight - 2m) + "}";
}
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0109[BP-]{}-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-1");
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
if (item.FCType == "KSA")
{
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideRight + fcNo * 1.25m) / 1000m;
}
else
{
swPart.Parameter("D2@草图1").SystemValue = (item.FCSideRight - 2m) / 1000m;
}
}
break;
default:
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0108[BP-]{}-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0109[BP-]{}-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
break;
}
//----------日本项目需要压缩零件----------
if (item.Japan == "YES")
{
//吊装垫片
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0070-9"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swFeat = swAssy.FeatureByName("LocalLPattern1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//排风脖颈
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "EXSPIGOT-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
//排风滑门
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "EXDOOR-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
//排风腔
//重命名装配体内部
compReName = "FNCE0125[KCJSB265-" + tree.Module + "]{" + (int)item.Length + "}";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0125-2") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-2" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-2");
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D1@Aufsatz-Linear austragen1").SystemValue = item.Length / 1000m;
swFeat = swComp.FeatureByName("EX");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("Cut-Extrude4");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANSULSIDE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANSULSIDE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTECSIDE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTECSIDE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
if (item.MARVEL == "YES")
{
swFeat = swComp.FeatureByName("MA-NTC");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("MA-TAB");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("MA-NTC");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("MA-TAB");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
}
else
{
//吊装垫片
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0070-9"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swFeat = swAssy.FeatureByName("LocalLPattern1");
swFeat.SetSuppression2(2, 2, configNames); //参数1：1解压，0压缩
//排风脖颈
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "EXSPIGOT-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0019-1"));
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@基体-法兰1").SystemValue = (item.ExLength + 50m) / 1000m;
swPart.Parameter("D3@草图1").SystemValue = item.ExHeight / 1000m;
swFeat = swComp.FeatureByName("ANSUL");
if (item.ANSUL == "YES")
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0020-1"));
swPart = swComp.GetModelDoc2();//打开零件
swPart.Parameter("D2@基体-法兰1").SystemValue = (item.ExLength + 50m) / 1000m;
swPart.Parameter("D3@草图1").SystemValue = item.ExHeight / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0047-1"));
swPart = swComp.GetModelDoc2();//打开零件
swPart.Parameter("D2@基体-法兰1").SystemValue = item.ExWidth / 1000m;
swPart.Parameter("D3@草图1").SystemValue = item.ExHeight / 1000m;
swFeat = swComp.FeatureByName("ANDTEC");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0048-2"));
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@基体-法兰1").SystemValue = item.ExWidth / 1000m;
swPart.Parameter("D3@草图1").SystemValue = item.ExHeight / 1000m;
swFeat = swComp.FeatureByName("ANDTEC");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//排风滑门
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "EXDOOR-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D1@Distance3").SystemValue = (item.ExWidth + 20m) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0018-1"));
swPart = swComp.GetModelDoc2();//打开零件
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.ExLength * 2m + 100m) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0013-1"));
swPart = swComp.GetModelDoc2();//打开零件
swPart.Parameter("D1@Sketch1").SystemValue = (item.ExLength / 2m + 10m) / 1000m;
swPart.Parameter("D2@Sketch1").SystemValue = (item.ExWidth + 40m) / 1000m;
//排风腔
//重命名装配体内部
compReName = "FNCE0125[KCJSB265-" + tree.Module + "]{" + (int)item.Length + "}";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0125-2") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-2" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-2");
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D1@Aufsatz-Linear austragen1").SystemValue = item.Length / 1000m;
swFeat = swComp.FeatureByName("EX");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("Cut-Extrude4");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch2").SystemValue = item.ExRightDis / 1000m;
swPart.Parameter("D1@Sketch2").SystemValue = item.ExLength / 1000m;
swPart.Parameter("D2@Sketch2").SystemValue = item.ExWidth / 1000m;
if (item.ANSUL == "YES")
{
//侧喷
if (item.ANSide == "LEFT")
{
swFeat = swComp.FeatureByName("ANSULSIDE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANSULSIDE LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else if (item.ANSide == "RIGHT")
{
swFeat = swComp.FeatureByName("ANSULSIDE RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANSULSIDE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("ANSULSIDE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANSULSIDE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//探测器
if (item.ANDetector == "LEFT")
{
swFeat = swComp.FeatureByName("ANDTECSIDE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTECSIDE LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else if (item.ANDetector == "RIGHT")
{
swFeat = swComp.FeatureByName("ANDTECSIDE RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTECSIDE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else if (item.ANDetector == "BOTH")
{
swFeat = swComp.FeatureByName("ANDTECSIDE RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTECSIDE LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("ANDTECSIDE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTECSIDE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
else
{
swFeat = swComp.FeatureByName("ANSULSIDE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANSULSIDE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTECSIDE RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTECSIDE LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
if (item.MARVEL == "YES")
{
swFeat = swComp.FeatureByName("MA-NTC");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("MA-TAB");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("MA-NTC");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("MA-TAB");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
}
//----------SSP灯板支撑条----------
if (item.SSPType == "DOME")
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0036-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0035-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Sketch1").SystemValue = item.Length / 1000m;
if (item.Gutter == "YES")
{
swModel.Parameter("D1@Distance12").SystemValue = item.GutterWidth / 1000m;
}
else
{
swModel.Parameter("D1@Distance12").SystemValue = 0.5m / 1000m;
}
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0036-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Sketch1").SystemValue = item.Length / 1000m;
if (item.Gutter == "YES")
{
swModel.Parameter("D1@Distance2").SystemValue = item.GutterWidth / 1000m;
}
else
{
swModel.Parameter("D1@Distance2").SystemValue = 0.5m / 1000m;
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0035-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
}
swModel.ForceRebuild3(true); //设置成true，直接更新顶层，速度很快，设置成false，每个零件都会更新，很慢
swModel.Save(); //保存，很耗时间
swApp.CloseDoc(packedAssyPath); //关闭，很快
}
catch (Exception ex)
{
throw new Exception(packedAssyPath + "作图过程发生异常，详细：" + ex.Message);
}
finally
{
swApp.CommandInProgress = false; //及时关闭外部命令调用，否则影响SolidWorks的使用
}
}
public void AutoDrawing(SldWorks swApp, ModuleTree tree, string projectPath)
{
//创建项目模型存放地址
string itemPath = projectPath + @"\" + tree.Module + "-" + tree.CategoryName;
if (!Directory.Exists(itemPath))
{
Directory.CreateDirectory(itemPath);
}
else
{
DialogResult result =
MessageBox.Show("模型文件夹" + itemPath + "存在，如果之前pack已经执行过，将不执行pack过程而是直接修改模型，如果要继续请点击YES，否请点击No中断作图", "提示信息",
MessageBoxButtons.YesNo);
if (result == DialogResult.No)
{
return;
}
}
//Pack的后缀
string suffix = tree.Module + "-" + tree.ODPNo.Substring(tree.ODPNo.Length - 6);
//判断文件是否存在，如果存在将不执行pack，如果不存在则执行pack
//packango后需要接收打包完成的地址，参数为后缀
string packedAssyPath = itemPath + @"\" + tree.CategoryName.ToLower() + "_" + suffix + ".sldasm";
if (!File.Exists(packedAssyPath))
{
packedAssyPath = CommonFunc.PackAndGoFunc(suffix, swApp, tree.ModelPath, itemPath);
}
//查询参数
DP330 item = (DP330)objDP330Service.GetModelByModuleTreeId(tree.ModuleTreeId.ToString());
swApp.CommandInProgress = true; //告诉SolidWorks，现在是用外部程序调用命令
int warnings = 0;
int errors = 0;
suffix = "_" + suffix;//后缀
ModelDoc2 swModel = default(ModelDoc2);
ModelDoc2 swPart = default(ModelDoc2);
AssemblyDoc swAssy = default(AssemblyDoc);
Component2 swComp;
Feature swFeat = default(Feature);
object configNames = null;
ModelDocExtension swModelDocExt = default(ModelDocExtension);
bool status = false;
string compReName = string.Empty;
//打开Pack后的模型
swModel = swApp.OpenDoc6(packedAssyPath, (int)swDocumentTypes_e.swDocASSEMBLY,
(int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2;
swAssy = swModel as AssemblyDoc; //装配体
string assyName = swModel.GetTitle().Substring(0, swModel.GetTitle().Length - 7); //获取装配体名称
swModelDocExt = (ModelDocExtension)swModel.Extension;
//打开装配体后必须重建，使Pack后的零件名都更新到带后缀的状态，否则程序出错
swModel.ForceRebuild3(true);
//TopOnly参数设置成true，只重建顶层，不重建零件内部
/*注意SolidWorks单位是m，计算是应当/1000m
* 整形与整形运算得出的结果仍然时整形，1640 / 1000m结果为0，因此必须将其中一个转化成decimal型，使用后缀m就可以了
* (int)不进行四舍五入，Convert.ToInt32会四舍五入
*/
//-----------计算中间值，----------
decimal leftSBDis = item.LeftDis;
decimal rightSBDis = item.RightDis;
try
{
//----------Top Level----------
if (item.Length < 1000m)
{
swModel.Parameter("D1@LocalLPattern2").SystemValue = 2;
swModel.Parameter("D3@LocalLPattern2").SystemValue = (item.Length - 400m) / 1000m;
}
else if (item.Length >= 1000m && item.Length < 2000m)
{
swModel.Parameter("D1@LocalLPattern2").SystemValue = 3;
swModel.Parameter("D3@LocalLPattern2").SystemValue = (item.Length - 400m) / 2000m;
}
else
{
swModel.Parameter("D1@LocalLPattern2").SystemValue = 4;
swModel.Parameter("D3@LocalLPattern2").SystemValue = (item.Length - 400m) / 3000m;
}
//----------侧板----------
switch (item.SidePanel)
{
case "LEFT":
case "DPBACKL":
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCS0003-2"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCS0005-10"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCS0004-2"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCS0005-11"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
break;
case "RIGHT":
case "DPBACKR":
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCS0003-2"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCS0005-10"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCS0004-2"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCS0005-11"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
break;
case "MIDDLE":
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCS0003-2"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCS0005-10"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCS0004-2"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCS0005-11"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
break;
default:
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCS0003-2"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCS0005-10"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCS0004-2"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCS0005-11"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
break;
}
//----------背板----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCS0002-2"));
swPart = swComp.GetModelDoc2();//打开零件
swPart.Parameter("D3@Skizze1").SystemValue = item.Length / 1000m;
swFeat = swComp.FeatureByName("DPB-LEFT");
if (item.SidePanel == "DPBACKL" || item.SidePanel == "DPBACKB")
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("DPB-RIGHT");
if (item.SidePanel == "DPBACKR" || item.SidePanel == "DPBACKB")
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//----------NOCJ腔主体----------
//重命名装配体内部
compReName = "FNCS0001[DP330-" + tree.Module + "]{" + (int)item.Length + "}";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCS0001-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-1");
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Skizze1").SystemValue = item.Length / 1000m;
if (item.Outlet == "LEFT")
{
swFeat = swComp.FeatureByName("OUTLET-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("OUTLET-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else if (item.Outlet == "RIGHT")
{
swFeat = swComp.FeatureByName("OUTLET-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("OUTLET-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("OUTLET-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("OUTLET-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("DPB-LEFT");
if (item.SidePanel == "DPBACKL" || item.SidePanel == "DPBACKB")
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("DPB-RIGHT");
if (item.SidePanel == "DPBACKR" || item.SidePanel == "DPBACKB")
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//DP
if (item.DPSide == "LEFT" || item.DPSide == "BOTH")
{
swFeat = swComp.FeatureByName("DP-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D14@Sketch42").SystemValue = (item.LeftDis + 1m) / 1000m;
leftSBDis = leftSBDis + 90m;
swFeat = swComp.FeatureByName("CUT-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch56").SystemValue = 105m / 1000m;
}
else
{
swFeat = swComp.FeatureByName("DP-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("CUT-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
if (item.DPSide == "RIGHT" || item.DPSide == "BOTH")
{
swFeat = swComp.FeatureByName("DP-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D14@Sketch43").SystemValue = (item.RightDis + 1m) / 1000m;
rightSBDis = rightSBDis + 90m;
swFeat = swComp.FeatureByName("CUT-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch58").SystemValue = 105m / 1000m;
}
else
{
swFeat = swComp.FeatureByName("DP-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("CUT-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//BCJ
if (item.BackCJSide == "LEFT" || item.BackCJSide == "BOTH")
{
swFeat = swComp.FeatureByName("BCJ-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D8@Sketch19").SystemValue = (item.LeftDis + 11m) / 1000m;
leftSBDis = leftSBDis + 90m;
}
else
{
swFeat = swComp.FeatureByName("BCJ-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
if (item.BackCJSide == "RIGHT" || item.BackCJSide == "BOTH")
{
swFeat = swComp.FeatureByName("BCJ-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch20").SystemValue = (item.RightDis + 11m) / 1000m;
rightSBDis = rightSBDis + 90m;
}
else
{
swFeat = swComp.FeatureByName("BCJ-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//----------左----------
////左类型排风腔KCJDB800
//if (item.LeftBeamType == "KCJDB800" || item.LeftBeamType == "UCJDB800")
//{
// swFeat = swComp.FeatureByName("BCJ-LEFT");
// swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
// swFeat = swComp.FeatureByName("KCJDB800-LEFT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D59@Sketch46").SystemValue = (item.LeftBeamDis + 1m) / 1000m;
// if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH")
// {
// swFeat = swComp.FeatureByName("GUTTER-LEFT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D4@Sketch48").SystemValue = (item.GutterWidth - 2m) / 1000m;
// swPart.Parameter("D5@Sketch48").SystemValue = (item.GutterWidth - 62m) / 1000m;
// swPart.Parameter("D6@Sketch48").SystemValue = (item.Length - item.LeftBeamDis + 1m) / 1000m;
// }
//}
//else
//{
// swFeat = swComp.FeatureByName("KCJDB800-LEFT");
// swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//}
//左类型排风腔KCWDB800
if (item.LeftBeamType == "KCWDB800" || item.LeftBeamType == "UCWDB800")
{
swFeat = swComp.FeatureByName("BCJ-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("DP-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("KCWDB800-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D30@Sketch50").SystemValue = (item.LeftBeamDis + 1m) / 1000m;
if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch53").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch53").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D7@Sketch53").SystemValue = (item.Length - item.LeftBeamDis + 1m) / 1000m;
}
}
else
{
swFeat = swComp.FeatureByName("KCWDB800-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
////左类型排风腔KCJSB535
//if (item.LeftBeamType == "KCJSB535" || item.LeftBeamType == "UCJSB535")
//{
// swFeat = swComp.FeatureByName("KCJSB535-LEFT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D46@Sketch35").SystemValue = (leftSBDis + 1m) / 1000m;
// if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH")
// {
// swFeat = swComp.FeatureByName("GUTTER-LEFT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D4@Sketch48").SystemValue = (item.GutterWidth - 2m) / 1000m;
// swPart.Parameter("D5@Sketch48").SystemValue = (item.GutterWidth - 62m) / 1000m;
// swPart.Parameter("D6@Sketch48").SystemValue = (leftSBDis + 535m + 1m) / 1000m;
// }
//}
//else
//{
// swFeat = swComp.FeatureByName("KCJSB535-LEFT");
// swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//}
//左类型排风腔KCWSB535
if (item.LeftBeamType == "KCWSB535" || item.LeftBeamType == "UCWSB535")
{
swFeat = swComp.FeatureByName("KCWSB535-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D25@Sketch48").SystemValue = (leftSBDis + 1m) / 1000m;
if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch53").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch53").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D7@Sketch53").SystemValue = (leftSBDis + 535m + 1m) / 1000m;
}
}
else
{
swFeat = swComp.FeatureByName("KCWSB535-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
////左类型排风腔UCJSB385
//if (item.LeftBeamType == "UCJSB385")
//{
// swFeat = swComp.FeatureByName("UCJSB385-LEFT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D16@Sketch43").SystemValue = (leftSBDis + 1m) / 1000m;
// if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH")
// {
// swFeat = swComp.FeatureByName("GUTTER-LEFT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D4@Sketch48").SystemValue = (item.GutterWidth - 2m) / 1000m;
// swPart.Parameter("D5@Sketch48").SystemValue = (item.GutterWidth - 62m) / 1000m;
// swPart.Parameter("D6@Sketch48").SystemValue = (leftSBDis + 385m + 1m) / 1000m;
// }
//}
//else
//{
// swFeat = swComp.FeatureByName("UCJSB385-LEFT");
// swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//}
////左类型排风腔KCJSB290
//if (item.LeftBeamType == "KCJSB290")
//{
// swFeat = swComp.FeatureByName("KCJSB290-LEFT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D14@Sketch41").SystemValue = (leftSBDis + 1m) / 1000m;
// if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH")
// {
// swFeat = swComp.FeatureByName("GUTTER-LEFT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D4@Sketch48").SystemValue = (item.GutterWidth - 2m) / 1000m;
// swPart.Parameter("D5@Sketch48").SystemValue = (item.GutterWidth - 62m) / 1000m;
// swPart.Parameter("D6@Sketch48").SystemValue = (leftSBDis + 290m + 1m) / 1000m;
// }
//}
//else
//{
// swFeat = swComp.FeatureByName("KCJSB290-LEFT");
// swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//}
////左类型排风腔KCJSB265
//if (item.LeftBeamType == "KCJSB265")
//{
// swFeat = swComp.FeatureByName("KCJSB265-LEFT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D23@Sketch28").SystemValue = (leftSBDis + 1m) / 1000m;
// if (item.LKSide == "LEFT" || item.LKSide == "BOTH")
// {
// swFeat = swComp.FeatureByName("LKS270-LEFT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D24@Sketch51").SystemValue = (leftSBDis + 265m + 1m) / 1000m;
// if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH")
// {
// swFeat = swComp.FeatureByName("GUTTER-LEFT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D4@Sketch48").SystemValue = (item.GutterWidth - 2m) / 1000m;
// swPart.Parameter("D5@Sketch48").SystemValue = (item.GutterWidth - 62m) / 1000m;
// swPart.Parameter("D6@Sketch48").SystemValue = (leftSBDis + 270m + 265m + 1m) / 1000m;
// }
// }
// else
// {
// if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH")
// {
// swFeat = swComp.FeatureByName("GUTTER-LEFT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D4@Sketch48").SystemValue = (item.GutterWidth - 2m) / 1000m;
// swPart.Parameter("D5@Sketch48").SystemValue = (item.GutterWidth - 62m) / 1000m;
// swPart.Parameter("D6@Sketch48").SystemValue = (leftSBDis + 265m + 1m) / 1000m;
// }
// }
//}
//else
//{
// swFeat = swComp.FeatureByName("KCJSB265-LEFT");
// swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//}
//左类型排风腔KCWSB265
if (item.LeftBeamType == "KCWSB265")
{
swFeat = swComp.FeatureByName("KCWSB265-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D15@Sketch46").SystemValue = (leftSBDis + 1m) / 1000m;
if (item.LKSide == "LEFT" || item.LKSide == "BOTH")
{
swFeat = swComp.FeatureByName("LKS270-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D24@Sketch52").SystemValue = (leftSBDis + 265m + 1m) / 1000m;
if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch53").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch53").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D7@Sketch53").SystemValue = (leftSBDis + 270m + 265m + 1m) / 1000m;
}
}
else
{
if (item.GutterSide == "LEFT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch53").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch53").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D7@Sketch53").SystemValue = (leftSBDis + 265m + 1m) / 1000m;
}
}
}
else
{
swFeat = swComp.FeatureByName("KCWSB265-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//----------右----------
////右类型排风腔KCJDB800
//if (item.RightBeamType == "KCJDB800" || item.RightBeamType == "UCJDB800")
//{
// swFeat = swComp.FeatureByName("BCJ-RIGHT");
// swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
// swFeat = swComp.FeatureByName("KCJDB800-RIGHT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D59@Sketch47").SystemValue = (item.RightBeamDis + 1m) / 1000m;
// if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH")
// {
// swFeat = swComp.FeatureByName("GUTTER-RIGHT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D4@Sketch50").SystemValue = (item.GutterWidth - 2m) / 1000m;
// swPart.Parameter("D5@Sketch50").SystemValue = (item.GutterWidth - 62m) / 1000m;
// swPart.Parameter("D7@Sketch50").SystemValue = (item.Length - item.RightBeamDis + 1m) / 1000m;
// }
//}
//else
//{
// swFeat = swComp.FeatureByName("KCJDB800-RIGHT");
// swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//}
//右类型排风腔KCWDB800
if (item.RightBeamType == "KCWDB800" || item.RightBeamType == "UCWDB800")
{
swFeat = swComp.FeatureByName("BCJ-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("DP-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("KCWDB800-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D31@Sketch51").SystemValue = (item.RightBeamDis + 1m) / 1000m;
if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch55").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch55").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D7@Sketch55").SystemValue =
(item.Length - item.RightBeamDis + 1m) / 1000m;
}
}
else
{
swFeat = swComp.FeatureByName("KCWDB800-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
////右类型排风腔KCJSB535
//if (item.RightBeamType == "KCJSB535" || item.RightBeamType == "UCJSB535")
//{
// swFeat = swComp.FeatureByName("KCJSB535-RIGHT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D46@Sketch37").SystemValue = (rightSBDis + 1m) / 1000m;
// if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH")
// {
// swFeat = swComp.FeatureByName("GUTTER-RIGHT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D4@Sketch50").SystemValue = (item.GutterWidth - 2m) / 1000m;
// swPart.Parameter("D5@Sketch50").SystemValue = (item.GutterWidth - 62m) / 1000m;
// swPart.Parameter("D7@Sketch50").SystemValue = (rightSBDis + 535m + 1m) / 1000m;
// }
//}
//else
//{
// swFeat = swComp.FeatureByName("KCJSB535-RIGHT");
// swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//}
//右类型排风腔KCWSB535
if (item.RightBeamType == "KCWSB535" || item.RightBeamType == "UCWSB535")
{
swFeat = swComp.FeatureByName("KCWSB535-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D24@Sketch49").SystemValue = (rightSBDis + 1m) / 1000m;
if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch55").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch55").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D7@Sketch55").SystemValue = (rightSBDis + 535m + 1m) / 1000m;
}
}
else
{
swFeat = swComp.FeatureByName("KCWSB535-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
////右类型排风腔UCJSB385
//if (item.RightBeamType == "UCJSB385")
//{
// swFeat = swComp.FeatureByName("UCJSB385-RIGHT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D16@Sketch44").SystemValue = (rightSBDis + 1m) / 1000m;
// if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH")
// {
// swFeat = swComp.FeatureByName("GUTTER-RIGHT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D4@Sketch50").SystemValue = (item.GutterWidth - 2m) / 1000m;
// swPart.Parameter("D5@Sketch50").SystemValue = (item.GutterWidth - 62m) / 1000m;
// swPart.Parameter("D7@Sketch50").SystemValue = (rightSBDis + 385m + 1m) / 1000m;
// }
//}
//else
//{
// swFeat = swComp.FeatureByName("UCJSB385-RIGHT");
// swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//}
////右类型排风腔KCJSB290
//if (item.RightBeamType == "KCJSB290")
//{
// swFeat = swComp.FeatureByName("KCJSB290-RIGHT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D14@Sketch42").SystemValue = (rightSBDis + 1m) / 1000m;
// if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH")
// {
// swFeat = swComp.FeatureByName("GUTTER-RIGHT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D4@Sketch50").SystemValue = (item.GutterWidth - 2m) / 1000m;
// swPart.Parameter("D5@Sketch50").SystemValue = (item.GutterWidth - 62m) / 1000m;
// swPart.Parameter("D7@Sketch50").SystemValue = (rightSBDis + 290m + 1m) / 1000m;
// }
//}
//else
//{
// swFeat = swComp.FeatureByName("KCJSB290-RIGHT");
// swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//}
////右类型排风腔KCJSB265
//if (item.RightBeamType == "KCJSB265")
//{
// swFeat = swComp.FeatureByName("KCJSB265-RIGHT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D1@Sketch55").SystemValue = (rightSBDis + 1m) / 1000m;
// if (item.LKSide == "RIGHT" || item.LKSide == "BOTH")
// {
// swFeat = swComp.FeatureByName("LKS270-RIGHT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D24@Sketch53").SystemValue = (rightSBDis + 265m + 1m) / 1000m;
// if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH")
// {
// swFeat = swComp.FeatureByName("GUTTER-RIGHT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D4@Sketch50").SystemValue = (item.GutterWidth - 2m) / 1000m;
// swPart.Parameter("D5@Sketch50").SystemValue = (item.GutterWidth - 62m) / 1000m;
// swPart.Parameter("D7@Sketch50").SystemValue = (rightSBDis + 270m + 265m + 1m) / 1000m;
// }
// }
// else
// {
// if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH")
// {
// swFeat = swComp.FeatureByName("GUTTER-RIGHT");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D4@Sketch50").SystemValue = (item.GutterWidth - 2m) / 1000m;
// swPart.Parameter("D5@Sketch50").SystemValue = (item.GutterWidth - 62m) / 1000m;
// swPart.Parameter("D7@Sketch50").SystemValue = (rightSBDis + 265m + 1m) / 1000m;
// }
// }
//}
//else
//{
// swFeat = swComp.FeatureByName("KCJSB265-RIGHT");
// swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//}
//右类型排风腔KCWSB265
if (item.RightBeamType == "KCWSB265")
{
swFeat = swComp.FeatureByName("KCWSB265-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D15@Sketch47").SystemValue = (rightSBDis + 1m) / 1000m;
if (item.LKSide == "RIGHT" || item.LKSide == "BOTH")
{
swFeat = swComp.FeatureByName("LKS270-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D24@Sketch54").SystemValue = (rightSBDis + 265m + 1m) / 1000m;
if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch55").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch55").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D7@Sketch55").SystemValue = (rightSBDis + 270m + 265m + 1m) / 1000m;
}
}
else
{
if (item.GutterSide == "RIGHT" || item.GutterSide == "BOTH")
{
swFeat = swComp.FeatureByName("GUTTER-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch55").SystemValue = (item.GutterWidth - 2m) / 1000m;
swPart.Parameter("D5@Sketch55").SystemValue = (item.GutterWidth - 62m) / 1000m;
swPart.Parameter("D7@Sketch55").SystemValue = (rightSBDis + 265m + 1m) / 1000m;
}
}
}
else
{
swFeat = swComp.FeatureByName("KCWSB265-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
swModel.ForceRebuild3(true); //设置成true，直接更新顶层，速度很快，设置成false，每个零件都会更新，很慢
swModel.Save(); //保存，很耗时间
swApp.CloseDoc(packedAssyPath); //关闭，很快
}
catch (Exception ex)
{
throw new Exception(packedAssyPath + "作图过程发生异常，详细：" + ex.Message);
}
finally
{
swApp.CommandInProgress = false; //及时关闭外部命令调用，否则影响SolidWorks的使用
}
}
public void AutoDrawing(SldWorks swApp, ModuleTree tree, string projectPath)
{
//创建项目模型存放地址
string itemPath = projectPath + @"\" + tree.Item + "-" + tree.Module + "-" + tree.CategoryName;
if (!Directory.Exists(itemPath))
{
Directory.CreateDirectory(itemPath);
}
else
{
DialogResult result =
MessageBox.Show("模型文件夹" + itemPath + "存在，如果之前pack已经执行过，将不执行pack过程而是直接修改模型，如果要继续请点击YES，否请点击No中断作图", "提示信息",
MessageBoxButtons.YesNo);
if (result == DialogResult.No)
{
return;
}
}
//Pack的后缀
string suffix = tree.Item + "-" + tree.Module + "-" +
tree.ODPNo.Substring(tree.ODPNo.Length - 6);
//判断文件是否存在，如果存在将不执行pack，如果不存在则执行pack
//packango后需要接收打包完成的地址，参数为后缀
string packedAssyPath = itemPath + @"\" + tree.CategoryName.ToLower() + "_" + suffix + ".sldasm";
if (!File.Exists(packedAssyPath))
{
packedAssyPath = CommonFunc.PackAndGoFunc(suffix, swApp, tree.ModelPath, itemPath);
}
//查询参数
ABD200 item = (ABD200)objABD200Service.GetModelByModuleTreeId(tree.ModuleTreeId.ToString());
swApp.CommandInProgress = true; //告诉SolidWorks，现在是用外部程序调用命令
int warnings = 0;
int errors = 0;
suffix = "_" + suffix;//后缀
ModelDoc2 swModel = default(ModelDoc2);
ModelDoc2 swPart = default(ModelDoc2);
AssemblyDoc swAssy = default(AssemblyDoc);
Component2 swComp;
Feature swFeat = default(Feature);
object configNames = null;
//打开Pack后的模型
swModel = swApp.OpenDoc6(packedAssyPath, (int)swDocumentTypes_e.swDocASSEMBLY,
(int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2;
swAssy = swModel as AssemblyDoc; //装配体
//打开装配体后必须重建，使Pack后的零件名都更新到带后缀的状态，否则程序出错
swModel.ForceRebuild3(true); //TopOnly参数设置成true，只重建顶层，不重建零件内部
/*注意SolidWorks单位是m，计算是应当/1000m
* 整形与整形运算得出的结果仍然时整形，1640 / 1000m结果为0，因此必须将其中一个转化成decimal型，使用后缀m就可以了
* (int)不进行四舍五入，Convert.ToInt32会四舍五入
*/
//-----------计算中间值，----------
//铆钉数量
int rivetNo = (int)((item.Length - 47m) / 400m);
decimal rivetDis = (item.Length - 47m) / rivetNo;
try
{
//----------Top Level----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHO0136-1"));
swPart = swComp.GetModelDoc2();//打开零件3
swPart.Parameter("D1@Sketch1").SystemValue = (item.Length - 5m) / 1000m;
if (item.Length == 400m || item.Length == 500m)
{
swFeat = swComp.FeatureByName("MIDDLE");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("300");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("MIDDLE");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("300");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHO0134-1"));
swPart = swComp.GetModelDoc2();//打开零件3
swPart.Parameter("D12@Sketch1").SystemValue = (item.Length - 6m) / 1000m;
if (item.Length == 400m || item.Length == 750m)
{
swPart.Parameter("D5@Sketch27").SystemValue = 28.5m / 1000m;
}
else
{
swPart.Parameter("D5@Sketch27").SystemValue = 78.5m / 1000m;
}
swFeat = swComp.FeatureByName("750");
if (item.Length == 750m)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHO0135-2"));
swPart = swComp.GetModelDoc2();//打开零件3
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.Length - 25m) / 1000m;
if (item.Length == 400m || item.Length == 750m)
{
swPart.Parameter("D4@Sketch7").SystemValue = 17.5m / 1000m;
}
else
{
swPart.Parameter("D4@Sketch7").SystemValue = 67.5m / 1000m;
}
swFeat = swComp.FeatureByName("750");
if (item.Length == 750m)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHE0006-1"));
swPart = swComp.GetModelDoc2();//打开零件3
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.Length + 50m) / 1000m;
swFeat = swComp.FeatureByName("ABD");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
if (item.Length == 400m || item.Length == 500m)
{
swFeat = swComp.FeatureByName("ABD-MIDDLE");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ABD-300");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("ABD-MIDDLE");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ABD-300");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHE0007-1"));
swPart = swComp.GetModelDoc2();//打开零件3
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.Length + 50m) / 1000m;
swFeat = swComp.FeatureByName("ABD");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
if (item.Length == 400m || item.Length == 500m)
{
swFeat = swComp.FeatureByName("ABD-MIDDLE");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ABD-300");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("ABD-MIDDLE");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ABD-300");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
swModel.ForceRebuild3(true); //设置成true，直接更新顶层，速度很快，设置成false，每个零件都会更新，很慢
swModel.Save(); //保存，很耗时间
swApp.CloseDoc(packedAssyPath); //关闭，很快
}
catch (Exception ex)
{
throw new Exception(packedAssyPath + "作图过程发生异常，详细：" + ex.Message);
}
finally
{
swApp.CommandInProgress = false; //及时关闭外部命令调用，否则影响SolidWorks的使用
}
}
public void AutoDrawing(SldWorks swApp, ModuleTree tree, string projectPath)
{
//创建项目模型存放地址
string itemPath = projectPath + @"\" + tree.Module + "-" + tree.CategoryName;
if (!Directory.Exists(itemPath))
{
Directory.CreateDirectory(itemPath);
}
else
{
DialogResult result =
MessageBox.Show("模型文件夹" + itemPath + "存在，如果之前pack已经执行过，将不执行pack过程而是直接修改模型，如果要继续请点击YES，否请点击No中断作图", "提示信息",
MessageBoxButtons.YesNo);
if (result == DialogResult.No)
{
return;
}
}
//Pack的后缀
string suffix = tree.Module + "-" + tree.ODPNo.Substring(tree.ODPNo.Length - 6);
//判断文件是否存在，如果存在将不执行pack，如果不存在则执行pack
//packango后需要接收打包完成的地址，参数为后缀
string packedAssyPath = itemPath + @"\" + tree.CategoryName.ToLower() + "_" + suffix + ".sldasm";
if (!File.Exists(packedAssyPath))
{
packedAssyPath = CommonFunc.PackAndGoFunc(suffix, swApp, tree.ModelPath, itemPath);
}
//查询参数
LFUSA item = (LFUSA)objLFUSAService.GetModelByModuleTreeId(tree.ModuleTreeId.ToString());
swApp.CommandInProgress = true; //告诉SolidWorks，现在是用外部程序调用命令
int warnings = 0;
int errors = 0;
suffix = "_" + suffix;//后缀
ModelDoc2 swModel = default(ModelDoc2);
ModelDoc2 swPart = default(ModelDoc2);
AssemblyDoc swAssy = default(AssemblyDoc);
Component2 swComp;
Feature swFeat = default(Feature);
object configNames = null;
ModelDocExtension swModelDocExt = default(ModelDocExtension);
bool status = false;
string compReName = string.Empty;
//打开Pack后的模型
swModel = swApp.OpenDoc6(packedAssyPath, (int)swDocumentTypes_e.swDocASSEMBLY,
(int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2;
swAssy = swModel as AssemblyDoc; //装配体
string assyName = swModel.GetTitle().Substring(0, swModel.GetTitle().Length - 7); //获取装配体名称
swModelDocExt = (ModelDocExtension)swModel.Extension;
//打开装配体后必须重建，使Pack后的零件名都更新到带后缀的状态，否则程序出错
swModel.ForceRebuild3(true);
//TopOnly参数设置成true，只重建顶层，不重建零件内部
/*注意SolidWorks单位是m，计算是应当/1000m
* 整形与整形运算得出的结果仍然时整形，1640 / 1000m结果为0，因此必须将其中一个转化成decimal型，使用后缀m就可以了
* (int)不进行四舍五入，Convert.ToInt32会四舍五入
*/
//-----------计算中间值，----------
try
{
//----------Top Level----------
//----------散流器主体----------
//重命名装配体内部
compReName = "FNCA0001[LFUSA-" + tree.Module + "]{" + (int)item.Length + "}(" + (int)item.Width + ")";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCA0001-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-1");
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Base-Flange1").SystemValue = item.Length / 1000m;
swPart.Parameter("D1@Sketch1").SystemValue = (item.Width - 2m) / 1000m;
swPart.Parameter("D2@Sketch2").SystemValue = item.SuDia / 1000m;
swPart.Parameter("D1@Sketch2").SystemValue =
(item.SuDis * (item.SuNo / 2m - 1m) + item.SuDis / 2m) / 1000m;
if (item.SuNo < 2)
{
swFeat = swComp.FeatureByName("LPattern1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("LPattern1");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@LPattern1").SystemValue = item.SuNo;
swPart.Parameter("D3@LPattern1").SystemValue = item.SuDis / 1000m;
}
swFeat = swComp.FeatureByName("HANGERHOLE");
if (item.Japan == "YES")
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("CUTLEFT");
if (item.SidePanel == "LEFT" || item.SidePanel == "BOTH")
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("CUTRIGHT");
if (item.SidePanel == "RIGHT" || item.SidePanel == "BOTH")
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
//----------侧板----------
switch (item.SidePanel)
{
case "LEFT":
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0002-2"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D1@Sketch1").SystemValue = (item.Width - 2m) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0003-4"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D9@Skizze1").SystemValue = (item.Width - 2m) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0002-3"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0003-3"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
break;
case "RIGHT":
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0002-2"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0003-4"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0002-3"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D1@Sketch1").SystemValue = (item.Width - 2m) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0003-3"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D9@Skizze1").SystemValue = (item.Width - 2m) / 1000m;
break;
case "MIDDLE":
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0002-2"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0003-4"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0002-3"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0003-3"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D9@Skizze1").SystemValue = (item.Width - 2m) / 1000m;
break;
default:
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0002-2"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D1@Sketch1").SystemValue = (item.Width - 2m) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0003-4"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0002-3"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCA0003-3"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
break;
}
if (item.Japan == "YES")
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0070-9"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swFeat = swAssy.FeatureByName("LocalLPattern1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0070-9"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swFeat = swAssy.FeatureByName("LocalLPattern1");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
swModel.ForceRebuild3(true); //设置成true，直接更新顶层，速度很快，设置成false，每个零件都会更新，很慢
swModel.Save(); //保存，很耗时间
swApp.CloseDoc(packedAssyPath); //关闭，很快
}
catch (Exception ex)
{
throw new Exception(packedAssyPath + "作图过程发生异常，详细：" + ex.Message);
}
finally
{
swApp.CommandInProgress = false; //及时关闭外部命令调用，否则影响SolidWorks的使用
}
}
public void AutoDrawing(SldWorks swApp, ModuleTree tree, string projectPath)
{
//创建项目模型存放地址
string itemPath = projectPath + @"\" + tree.Item + "-" + tree.Module + "-" + tree.CategoryName;
if (!Directory.Exists(itemPath))
{
Directory.CreateDirectory(itemPath);
}
else
{
DialogResult result =
MessageBox.Show("模型文件夹" + itemPath + "存在，如果之前pack已经执行过，将不执行pack过程而是直接修改模型，如果要继续请点击YES，否请点击No中断作图", "提示信息",
MessageBoxButtons.YesNo);
if (result == DialogResult.No)
{
return;
}
}
//Pack的后缀
string suffix = tree.Item + "-" + tree.Module + "-" +
tree.ODPNo.Substring(tree.ODPNo.Length - 6);
//判断文件是否存在，如果存在将不执行pack，如果不存在则执行pack
//packango后需要接收打包完成的地址，参数为后缀
string packedAssyPath = itemPath + @"\" + tree.CategoryName.ToLower() + "_" + suffix + ".sldasm";
if (!File.Exists(packedAssyPath))
{
packedAssyPath = CommonFunc.PackAndGoFunc(suffix, swApp, tree.ModelPath, itemPath);
}
//查询参数
KVS item = (KVS)objKVSService.GetModelByModuleTreeId(tree.ModuleTreeId.ToString());
swApp.CommandInProgress = true; //告诉SolidWorks，现在是用外部程序调用命令
int warnings = 0;
int errors = 0;
suffix = "_" + suffix;//后缀
ModelDoc2 swModel = default(ModelDoc2);
ModelDoc2 swPart = default(ModelDoc2);
AssemblyDoc swAssy = default(AssemblyDoc);
Component2 swComp;
Feature swFeat = default(Feature);
object configNames = null;
//打开Pack后的模型
swModel = swApp.OpenDoc6(packedAssyPath, (int)swDocumentTypes_e.swDocASSEMBLY,
(int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2;
swAssy = swModel as AssemblyDoc; //装配体
//打开装配体后必须重建，使Pack后的零件名都更新到带后缀的状态，否则程序出错
swModel.ForceRebuild3(true); //TopOnly参数设置成true，只重建顶层，不重建零件内部
/*注意SolidWorks单位是m，计算是应当/1000m
* 整形与整形运算得出的结果仍然时整形，1640 / 1000m结果为0，因此必须将其中一个转化成decimal型，使用后缀m就可以了
* (int)不进行四舍五入，Convert.ToInt32会四舍五入
*/
//-----------计算中间值，----------
//新风CJ孔数量和新风CJ孔第一个CJ距离边缘距离
int frontCjNo = (int)((item.Length - 3m - 30m) / 32m) + 1;
decimal frontCjFirstDis = (item.Length - 3m - (frontCjNo - 1) * 32m) / 2m;
//铆钉数量
int rivetNo = (int)((item.Length - 200m) / 300m);
decimal rivetDis = (item.Length - 200m) / rivetNo;
//为了适应肯德基脖颈缺口
decimal midRoofSecondHoleDis = 0m;
if (item.ExNo == 2)
{
midRoofSecondHoleDis = (item.Length - 300m - item.ExDis - item.ExLength) / 4m;
}
else if (item.ExNo == 1)
{
midRoofSecondHoleDis = (item.Length - 300m) / 2m;
}
//KSA数量，KSA侧板长度(以全长计算)
int ksaNo = (int)((item.Length - 7m) / 498m);
decimal ksaSideLength = (item.Length - 8m - ksaNo * 498m) / 2m;
try
{
//----------Top Level----------
////判断KSA数量，KSA侧板长度，如果太小，则使用特殊小侧板侧边
//swFeat = swAssy.FeatureByName("LocalLPattern1");
//if (ksaNo == 1) swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//else
//{
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swModel.Parameter("D1@LocalLPattern1").SystemValue = ksaNo; //D1阵列数量,D3阵列距离
//}
////KSA距离左边缘
//if (ksaSideLength < 12m / 1000m) swModel.Parameter("D1@Distance15").SystemValue = 0.5m / 1000m;
//else swModel.Parameter("D1@Distance15").SystemValue = ksaSideLength;
//排风脖颈数量和距离
if (item.ExNo == 1)
{
swModel.Parameter("D1@Distance52").SystemValue = (item.Length - item.ExLength) / 2000m;
swFeat = swAssy.FeatureByName("LocalLPattern1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else if (item.ExNo == 2)
{
swModel.Parameter("D1@Distance52").SystemValue = ((item.Length - item.ExDis) / 2m - item.ExLength) / 1000m;
swFeat = swAssy.FeatureByName("LocalLPattern1");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swModel.Parameter("D1@LocalLPattern1").SystemValue = item.ExNo; //D1阵列数量,D3阵列距离
swModel.Parameter("D3@LocalLPattern1").SystemValue = (item.ExDis + item.ExLength) / 1000m; //D1阵列数量,D3阵列距离
}
//日光灯
if (item.LightType == "FSSHORT")
{
//SHORT
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHM0003-3"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHM0004-2"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHM0005-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHM0005-2"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201020404-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201020406-S-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201020424-3"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201020424-4"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200300026-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200300026-3"));
swComp.SetSuppression2(2); //2解压缩，0压缩
//LONG
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHM0002-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHM0002-2"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHM0003-4"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHM0004-3"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201020405-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201020407-S-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201020424-5"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201020424-6"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200300023-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200300023-2"));
swComp.SetSuppression2(0); //2解压缩，0压缩
}
else
{
//SHORT
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHM0003-3"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHM0004-2"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHM0005-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHM0005-2"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201020404-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201020406-S-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201020424-3"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201020424-4"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200300026-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200300026-3"));
swComp.SetSuppression2(0); //2解压缩，0压缩
//LONG
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHM0002-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHM0002-2"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHM0003-4"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHM0004-3"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201020405-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201020407-S-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201020424-5"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201020424-6"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200300023-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200300023-2"));
swComp.SetSuppression2(2); //2解压缩，0压缩
}
//----------排风腔----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHE0110-1"));
swPart = swComp.GetModelDoc2();//打开零件3
swPart.Parameter("D1@Sketch1").SystemValue = (item.Length - 7m) / 1000m;
swPart.Parameter("D5@Sketch62").SystemValue = (item.ExDis + item.ExLength) / 1000m;
//排风口
if (item.ExNo == 1)
{
swFeat = swComp.FeatureByName("EXCOONE");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("EXCOTWO");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch115").SystemValue = item.ExLength / 1000m;
swPart.Parameter("D2@Sketch115").SystemValue = item.ExWidth / 1000m;
swPart.Parameter("D5@Sketch62").SystemValue = midRoofSecondHoleDis / 1000m;
}
else
{
swFeat = swComp.FeatureByName("EXCOONE");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("EXCOTWO");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D4@Sketch114").SystemValue = item.ExDis / 1000m;
swPart.Parameter("D2@Sketch114").SystemValue = item.ExLength / 1000m;
swPart.Parameter("D1@Sketch114").SystemValue = item.ExWidth / 1000m;
swPart.Parameter("D5@Sketch62").SystemValue = (item.ExDis + item.ExLength) / 1000m;
if (midRoofSecondHoleDis > 300m)
{
swFeat = swComp.FeatureByName("MIDROOFINSDIS2");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D3@Sketch116").SystemValue = midRoofSecondHoleDis / 1000m;
}
else
{
swFeat = swComp.FeatureByName("MIDROOFINSDIS2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
//----------其他零件----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHE0111-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D2@Sketch1").SystemValue = (item.Length - 6m) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHE0112-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D2@Sketch3").SystemValue = ksaSideLength / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHE0113-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D2@Sketch3").SystemValue = ksaSideLength / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHE0114-2"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D1@Sketch1").SystemValue = (item.ExLength + 50m) / 1000m;
swPart.Parameter("D2@Sketch1").SystemValue = (item.ExHeight + 54.8m) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHE0115-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D1@Sketch1").SystemValue = (item.ExLength + 50m) / 1000m;
swPart.Parameter("D2@Sketch1").SystemValue = (item.ExHeight + 54.8m) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHE0117-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D1@Sketch1").SystemValue = item.ExLength / 2000m;
swPart.Parameter("D2@Sketch1").SystemValue = (item.ExWidth + 20m) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHE0118-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D2@Sketch1").SystemValue = (item.ExLength * 2m) / 1000m;
//----------MiddleRoof灯板----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHM0023-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D2@Sketch1").SystemValue = (item.Length - 3m) / 1000m;
swPart.Parameter("D1@Sketch1").SystemValue = (item.Deepth - 788.5m) / 1000m;
if (item.ExNo == 1)
{
swFeat = swComp.FeatureByName("MIDROOFINSDIS2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D2@Sketch20").SystemValue = midRoofSecondHoleDis / 1000m;
}
else
{
swPart.Parameter("D2@Sketch20").SystemValue = (item.ExDis + item.ExLength) / 1000m;
if (midRoofSecondHoleDis > 300m)
{
swFeat = swComp.FeatureByName("MIDROOFINSDIS2");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch26").SystemValue = midRoofSecondHoleDis / 1000m;
}
else
{
swFeat = swComp.FeatureByName("MIDROOFINSDIS2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
//灯具
if (item.LightType == "FSSHORT")
{
swFeat = swComp.FeatureByName("FSLONG");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("FSSHORT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("FSLONG");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("FSSHORT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201020401-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.Deepth - 793m) / 1000m;
//----------大侧板----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0036-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D2@Sketch1").SystemValue = item.Deepth / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0037-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D2@Sketch1").SystemValue = item.Deepth / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0038-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D2@Sketch1").SystemValue = item.Deepth / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0039-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D2@Sketch1").SystemValue = item.Deepth / 1000m;
//------------新风腔----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHA0052-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.Length - 7m) / 1000m;
if (item.ExNo == 1)
{
swFeat = swComp.FeatureByName("MIDROOFINSDIS2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D3@Sketch50").SystemValue = midRoofSecondHoleDis / 1000m;
}
else
{
swPart.Parameter("D3@Sketch50").SystemValue = (item.ExDis + item.ExLength) / 1000m;
if (midRoofSecondHoleDis > 300m)
{
swFeat = swComp.FeatureByName("MIDROOFINSDIS2");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D3@Sketch127").SystemValue = midRoofSecondHoleDis / 1000m;
}
else
{
swFeat = swComp.FeatureByName("MIDROOFINSDIS2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
swPart.Parameter("D1@LPattern2").SystemValue = rivetNo + 1;
swPart.Parameter("D3@LPattern2").SystemValue = rivetDis / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHA0053-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.Length - 103m) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHA0054-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.Length - 3m) / 1000m;
swPart.Parameter("D1@LPattern1").SystemValue = frontCjNo;
swPart.Parameter("D10@Sketch8").SystemValue = frontCjFirstDis / 1000m;
swPart.Parameter("D1@LPattern2").SystemValue = rivetNo + 1;
swPart.Parameter("D3@LPattern2").SystemValue = rivetDis / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHA0055-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.Length - 7m) / 1000m;
swModel.ForceRebuild3(true); //设置成true，直接更新顶层，速度很快，设置成false，每个零件都会更新，很慢
swModel.Save(); //保存，很耗时间
swApp.CloseDoc(packedAssyPath); //关闭，很快
}
catch (Exception ex)
{
throw new Exception(packedAssyPath + "作图过程发生异常，详细：" + ex.Message);
}
finally
{
swApp.CommandInProgress = false; //及时关闭外部命令调用，否则影响SolidWorks的使用
}
}
public void AutoDrawing(SldWorks swApp, ModuleTree tree, string projectPath)
{
//创建项目模型存放地址
string itemPath = projectPath + @"\" + tree.Item + "-" + tree.Module + "-" + tree.CategoryName;
if (!Directory.Exists(itemPath))
{
Directory.CreateDirectory(itemPath);
}
else
{
DialogResult result =
MessageBox.Show("模型文件夹" + itemPath + "存在，如果之前pack已经执行过，将不执行pack过程而是直接修改模型，如果要继续请点击YES，否请点击No中断作图", "提示信息",
MessageBoxButtons.YesNo);
if (result == DialogResult.No)
{
return;
}
}
//Pack的后缀
string suffix = tree.Item + "-" + tree.Module + "-" +
tree.ODPNo.Substring(tree.ODPNo.Length - 6);
//判断文件是否存在，如果存在将不执行pack，如果不存在则执行pack
//packango后需要接收打包完成的地址，参数为后缀
string packedAssyPath = itemPath + @"\" + tree.CategoryName.ToLower() + "_" + suffix + ".sldasm";
if (!File.Exists(packedAssyPath))
{
packedAssyPath = CommonFunc.PackAndGoFunc(suffix, swApp, tree.ModelPath, itemPath);
}
//查询参数
LSDOST item = (LSDOST)objLSDOSTService.GetModelByModuleTreeId(tree.ModuleTreeId.ToString());
swApp.CommandInProgress = true; //告诉SolidWorks，现在是用外部程序调用命令
int warnings = 0;
int errors = 0;
suffix = "_" + suffix;//后缀
ModelDoc2 swModel = default(ModelDoc2);
ModelDoc2 swPart = default(ModelDoc2);
AssemblyDoc swAssy = default(AssemblyDoc);
Component2 swComp;
Feature swFeat = default(Feature);
object configNames = null;
//打开Pack后的模型
swModel = swApp.OpenDoc6(packedAssyPath, (int)swDocumentTypes_e.swDocASSEMBLY,
(int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2;
swAssy = swModel as AssemblyDoc; //装配体
//打开装配体后必须重建，使Pack后的零件名都更新到带后缀的状态，否则程序出错
swModel.ForceRebuild3(true); //TopOnly参数设置成true，只重建顶层，不重建零件内部
/*注意SolidWorks单位是m，计算是应当/1000m
* 整形与整形运算得出的结果仍然时整形，1640 / 1000m结果为0，因此必须将其中一个转化成decimal型，使用后缀m就可以了
* (int)不进行四舍五入，Convert.ToInt32会四舍五入
*/
//-----------计算中间值，----------
//铆钉数量
int rivetNo = (int)((item.Length - 47m) / 400m);
decimal rivetDis = (item.Length - 47m) / rivetNo;
try
{
//----------Top Level----------
//排风脖颈数量和距离
if (item.SuNo == 1)
{
swFeat = swAssy.FeatureByName("LocalLPattern1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swAssy.FeatureByName("LocalLPattern1");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swModel.Parameter("D1@LocalLPattern1").SystemValue = item.SuNo; //D1阵列数量,D3阵列距离
swModel.Parameter("D3@LocalLPattern1").SystemValue = item.SuDis / 1000m; //D1阵列数量,D3阵列距离
}
//中间测风压孔，三个脖颈时解压,两块网孔板
if (item.SuNo == 3)
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNLC0005-2"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNLC0006-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swModel.Parameter("D1@LocalLPattern2").SystemValue = 4; //D1阵列数量,D3阵列距离
swModel.Parameter("D3@LocalLPattern2").SystemValue = (item.Length - 400m) / 3000m;
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNLC0005-2"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNLC0006-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swModel.Parameter("D1@LocalLPattern2").SystemValue = 2; //D1阵列数量,D3阵列距离
swModel.Parameter("D3@LocalLPattern2").SystemValue = item.Length - 400m / 3000m;
}
//----------散流器----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNLC0001-1"));
swPart = swComp.GetModelDoc2();//打开零件3
swPart.Parameter("D2@Sketch1").SystemValue = (item.Length - 7m) / 1000m;
if (item.SuNo == 1)
{
swFeat = swComp.FeatureByName("LPattern1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D3@Sketch30").SystemValue = 0;
}
else
{
swPart.Parameter("D3@Sketch30").SystemValue = (item.SuDis * (item.SuNo / 2m - 1) + item.SuDis / 2m) / 1000;
swFeat = swComp.FeatureByName("LPattern1");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@LPattern1").SystemValue = item.SuNo; //D1阵列数量,D3阵列距离
swPart.Parameter("D3@LPattern1").SystemValue = item.SuDis / 1000m; //D1阵列数量,D3阵列距离
}
if (rivetNo < 2)
{
swFeat = swComp.FeatureByName("Cut-Extrude10");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LPattern2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swPart.Parameter("D1@Sketch43").SystemValue = rivetDis / 1000m;
swFeat = swComp.FeatureByName("Cut-Extrude10");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LPattern2");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@LPattern2").SystemValue = rivetNo; //D1阵列数量,D3阵列距离
swPart.Parameter("D3@LPattern2").SystemValue = rivetDis / 1000m;
}
swFeat = swComp.FeatureByName("Cut-Extrude11");
if (item.SuNo == 3)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNLC0003-3"));
swPart = swComp.GetModelDoc2();//打开零件3
swPart.Parameter("D2@Sketch1").SystemValue = (item.Length - 4m) / 1000m;
if (rivetNo < 2)
{
swFeat = swComp.FeatureByName("Cut-Extrude4");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LPattern1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swPart.Parameter("D1@Sketch11").SystemValue = rivetDis / 1000m;
swFeat = swComp.FeatureByName("Cut-Extrude4");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LPattern1");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@LPattern1").SystemValue = rivetNo; //D1阵列数量,D3阵列距离
swPart.Parameter("D3@LPattern1").SystemValue = rivetDis / 1000m;
}
swFeat = swComp.FeatureByName("Cut-Extrude3");
if (item.SuNo == 3)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNLC0005-1"));
swPart = swComp.GetModelDoc2();//打开零件3
if (item.SuNo == 3)
{
swPart.Parameter("D1@Skizze1").SystemValue = (item.Length - 112m - 34m) / 2000m;
}
else
{
swPart.Parameter("D1@Skizze1").SystemValue = (item.Length - 112m) / 1000m;
}
swModel.ForceRebuild3(true); //设置成true，直接更新顶层，速度很快，设置成false，每个零件都会更新，很慢
swModel.Save(); //保存，很耗时间
swApp.CloseDoc(packedAssyPath); //关闭，很快
}
catch (Exception ex)
{
throw new Exception(packedAssyPath + "作图过程发生异常，详细：" + ex.Message);
}
finally
{
swApp.CommandInProgress = false; //及时关闭外部命令调用，否则影响SolidWorks的使用
}
}
public void AutoDrawing(SldWorks swApp, ModuleTree tree, string projectPath)
{
//创建项目模型存放地址
string itemPath = projectPath + @"\" + tree.Module + "-" + tree.CategoryName;
if (!Directory.Exists(itemPath))
{
Directory.CreateDirectory(itemPath);
}
else
{
DialogResult result =
MessageBox.Show("模型文件夹" + itemPath + "存在，如果之前pack已经执行过，将不执行pack过程而是直接修改模型，如果要继续请点击YES，否请点击No中断作图", "提示信息",
MessageBoxButtons.YesNo);
if (result == DialogResult.No)
{
return;
}
}
//Pack的后缀
string suffix = tree.Module + "-" + tree.ODPNo.Substring(tree.ODPNo.Length - 6);
//判断文件是否存在，如果存在将不执行pack，如果不存在则执行pack
//packango后需要接收打包完成的地址，参数为后缀
string packedAssyPath = itemPath + @"\" + tree.CategoryName.ToLower() + "_" + suffix + ".sldasm";
if (!File.Exists(packedAssyPath))
{
packedAssyPath = CommonFunc.PackAndGoFunc(suffix, swApp, tree.ModelPath, itemPath);
}
//查询参数
AN item = (AN)objANService.GetModelByModuleTreeId(tree.ModuleTreeId.ToString());
swApp.CommandInProgress = true; //告诉SolidWorks，现在是用外部程序调用命令
int warnings = 0;
int errors = 0;
suffix = "_" + suffix;//后缀
ModelDoc2 swModel = default(ModelDoc2);
ModelDoc2 swPart = default(ModelDoc2);
AssemblyDoc swAssy = default(AssemblyDoc);
Component2 swComp;
Feature swFeat = default(Feature);
object configNames = null;
ModelDocExtension swModelDocExt = default(ModelDocExtension);
bool status = false;
string compReName = string.Empty;
//打开Pack后的模型
swModel = swApp.OpenDoc6(packedAssyPath, (int)swDocumentTypes_e.swDocASSEMBLY,
(int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2;
swAssy = swModel as AssemblyDoc; //装配体
string assyName = swModel.GetTitle().Substring(0, swModel.GetTitle().Length - 7); //获取装配体名称
swModelDocExt = (ModelDocExtension)swModel.Extension;
//打开装配体后必须重建，使Pack后的零件名都更新到带后缀的状态，否则程序出错
swModel.ForceRebuild3(true);
//TopOnly参数设置成true，只重建顶层，不重建零件内部
/*注意SolidWorks单位是m，计算是应当/1000m
* 整形与整形运算得出的结果仍然时整形，1640 / 1000m结果为0，因此必须将其中一个转化成decimal型，使用后缀m就可以了
* (int)不进行四舍五入，Convert.ToInt32会四舍五入
*/
//-----------计算中间值，----------
try
{
//----------Top Level----------
//----------IR保护支架----------
if (item.MARVEL == "NO")
{
swFeat = swAssy.FeatureByName("LocalLPattern1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swAssy.FeatureByName("LocalLPattern2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCB0001-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCB0001-1"));
if (item.IRNo > 0)
{
swComp.SetSuppression2(2); //2解压缩，0压缩.
}
else
{
swComp.SetSuppression2(0); //2解压缩，0压缩.
}
swFeat = swAssy.FeatureByName("LocalLPattern1");
if (item.IRNo > 1)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swModel.Parameter("D3@LocalLPattern1").SystemValue = item.IRDis2 / 1000m;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swAssy.FeatureByName("LocalLPattern2");
if (item.IRNo > 2)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swModel.Parameter("D3@LocalLPattern2").SystemValue = (item.IRDis2 + item.IRDis3) / 1000m;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
//----------ANSUL探测器盒子----------
if (item.ANSUL == "NO")
{
swFeat = swAssy.FeatureByName("LocalLPattern3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swAssy.FeatureByName("LocalLPattern4");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swAssy.FeatureByName("LocalLPattern5");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swAssy.FeatureByName("LocalLPattern6");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201990405-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201990405-1"));
if (item.ANDetectorNo > 0)
{
swComp.SetSuppression2(2); //2解压缩，0压缩.
}
else
{
swComp.SetSuppression2(0); //2解压缩，0压缩.
}
swFeat = swAssy.FeatureByName("LocalLPattern3");
if (item.ANDetectorNo > 1)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swModel.Parameter("D3@LocalLPattern3").SystemValue = item.ANDetectorDis2 / 1000m;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swAssy.FeatureByName("LocalLPattern4");
if (item.ANDetectorNo > 2)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swModel.Parameter("D3@LocalLPattern4").SystemValue = (item.ANDetectorDis2 + item.ANDetectorDis3) / 1000m;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swAssy.FeatureByName("LocalLPattern5");
if (item.ANDetectorNo > 2)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swModel.Parameter("D3@LocalLPattern5").SystemValue = (item.ANDetectorDis2 + item.ANDetectorDis3 + item.ANDetectorDis4) / 1000m;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swAssy.FeatureByName("LocalLPattern6");
if (item.ANDetectorNo > 2)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swModel.Parameter("D3@LocalLPattern6").SystemValue = (item.ANDetectorDis2 + item.ANDetectorDis3 + item.ANDetectorDis4 + item.ANDetectorDis5) / 1000m;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
//----------ANSUL腔体----------
//重命名装配体内部
compReName = "FNCE0025[AN-" + tree.Module + "]{" + (int)item.Length + "}(" + (int)item.Width + ")";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0025-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-1");
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Base-Flange1").SystemValue = item.Length / 1000m;
swPart.Parameter("D1@Sketch1").SystemValue = item.Width / 1000m;
if (item.ANSUL == "NO")
{
swFeat = swComp.FeatureByName("AN1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AN2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AN3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AN4");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AN5");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC4");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC5");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("AN1");
if (item.ANDropNo > 0)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch7").SystemValue = item.ANYDis / 1000m;
swPart.Parameter("D2@Sketch7").SystemValue = item.ANDropDis1 / 1000m;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("AN2");
if (item.ANDropNo > 1)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D2@Sketch9").SystemValue = item.ANDropDis2 / 1000m;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("AN3");
if (item.ANDropNo > 2)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D2@Sketch10").SystemValue = item.ANDropDis3 / 1000m;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
if (item.ANDropNo > 3)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D2@Sketch11").SystemValue = item.ANDropDis4 / 1000m;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
if (item.ANDropNo > 4)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D2@Sketch12").SystemValue = item.ANDropDis5 / 1000m;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("ANDTEC1");
if (item.ANDetectorNo > 0)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D3@Sketch13").SystemValue = item.ANDetectorDis1 / 1000m;
if (item.ANDetectorEnd == "RIGHT")
{
swPart.Parameter("D1@Sketch13").SystemValue = 195m / 1000m;
}
else
{
swPart.Parameter("D1@Sketch13").SystemValue = 175m / 1000m;
}
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("ANDTEC2");
if (item.ANDetectorNo > 1)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D3@Sketch14").SystemValue = item.ANDetectorDis2 / 1000m;
if (item.ANDetectorEnd == "RIGHT")
{
swPart.Parameter("D1@Sketch14").SystemValue = 195m / 1000m;
}
else
{
swPart.Parameter("D1@Sketch14").SystemValue = 175m / 1000m;
}
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("ANDTEC3");
if (item.ANDetectorNo > 2)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D3@Sketch15").SystemValue = item.ANDetectorDis3 / 1000m;
if (item.ANDetectorEnd == "RIGHT")
{
swPart.Parameter("D1@Sketch15").SystemValue = 195m / 1000m;
}
else
{
swPart.Parameter("D1@Sketch15").SystemValue = 175m / 1000m;
}
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("ANDTEC4");
if (item.ANDetectorNo > 3)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D3@Sketch16").SystemValue = item.ANDetectorDis4 / 1000m;
if (item.ANDetectorEnd == "RIGHT")
{
swPart.Parameter("D1@Sketch16").SystemValue = 195m / 1000m;
}
else
{
swPart.Parameter("D1@Sketch16").SystemValue = 175m / 1000m;
}
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("ANDTEC5");
if (item.ANDetectorNo > 4)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D3@Sketch17").SystemValue = item.ANDetectorDis5 / 1000m;
if (item.ANDetectorEnd == "RIGHT")
{
swPart.Parameter("D1@Sketch17").SystemValue = 195m / 1000m;
}
else
{
swPart.Parameter("D1@Sketch17").SystemValue = 175m / 1000m;
}
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
if (item.MARVEL == "NO")
{
swFeat = swComp.FeatureByName("MA1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("MA2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("MA3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("MA1");
if (item.IRNo > 0)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D2@Sketch18").SystemValue = item.ANYDis / 1000m;
swPart.Parameter("D1@Sketch18").SystemValue = item.IRDis1 / 1000m;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("MA2");
if (item.IRNo > 1)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch19").SystemValue = item.IRDis2 / 1000m;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("MA3");
if (item.IRNo > 2)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch20").SystemValue = item.IRDis3 / 1000m;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
}
//----------ANSUL腔侧板----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0001-1"));
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Sketch2").SystemValue = (item.Width - 2m) / 1000m;
swFeat = swComp.FeatureByName("ANDTEC HOLE");
if (item.ANSUL == "YES" && item.ANDetectorNo > 0)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swModel.ForceRebuild3(true); //设置成true，直接更新顶层，速度很快，设置成false，每个零件都会更新，很慢
swModel.Save(); //保存，很耗时间
swApp.CloseDoc(packedAssyPath); //关闭，很快
}
catch (Exception ex)
{
throw new Exception(packedAssyPath + "作图过程发生异常，详细：" + ex.Message);
}
finally
{
swApp.CommandInProgress = false; //及时关闭外部命令调用，否则影响SolidWorks的使用
}
}
public void AutoDrawing(SldWorks swApp, ModuleTree tree, string projectPath)
{
//创建项目模型存放地址
string itemPath = projectPath + @"\" + tree.Item + "-" + tree.Module + "-" + tree.CategoryName;
if (!Directory.Exists(itemPath))
{
Directory.CreateDirectory(itemPath);
}
else
{
DialogResult result =
MessageBox.Show("模型文件夹" + itemPath + "存在，如果之前pack已经执行过，将不执行pack过程而是直接修改模型，如果要继续请点击YES，否请点击No中断作图", "提示信息",
MessageBoxButtons.YesNo);
if (result == DialogResult.No)
{
return;
}
}
//Pack的后缀
string suffix = tree.Item + "-" + tree.Module + "-" +
tree.ODPNo.Substring(tree.ODPNo.Length - 6);
//判断文件是否存在，如果存在将不执行pack，如果不存在则执行pack
//packango后需要接收打包完成的地址，参数为后缀
string packedAssyPath = itemPath + @"\" + tree.CategoryName.ToLower() + "_" + suffix + ".sldasm";
if (!File.Exists(packedAssyPath))
{
packedAssyPath = CommonFunc.PackAndGoFunc(suffix, swApp, tree.ModelPath, itemPath);
}
//查询参数
CMODI555 item = (CMODI555)objCMODI555Service.GetModelByModuleTreeId(tree.ModuleTreeId.ToString());
swApp.CommandInProgress = true; //告诉SolidWorks，现在是用外部程序调用命令
int warnings = 0;
int errors = 0;
suffix = "_" + suffix;//后缀
ModelDoc2 swModel = default(ModelDoc2);
ModelDoc2 swPart = default(ModelDoc2);
AssemblyDoc swAssy = default(AssemblyDoc);
Component2 swComp;
Feature swFeat = default(Feature);
object configNames = null;
//打开Pack后的模型
swModel = swApp.OpenDoc6(packedAssyPath, (int)swDocumentTypes_e.swDocASSEMBLY,
(int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2;
swAssy = swModel as AssemblyDoc; //装配体
//打开装配体后必须重建，使Pack后的零件名都更新到带后缀的状态，否则程序出错
swModel.ForceRebuild3(true); //TopOnly参数设置成true，只重建顶层，不重建零件内部
/*注意SolidWorks单位是m，计算是应当/1000m
* 整形与整形运算得出的结果仍然时整形，1640 / 1000m结果为0，因此必须将其中一个转化成decimal型，使用后缀m就可以了
* (int)不进行四舍五入，Convert.ToInt32会四舍五入
*/
//-----------计算中间值，----------
//新风面板卡扣数量及间距
int frontPanelKaKouNo = (int)((item.Length - 300m) / 450m) + 2;
decimal frontPanelKaKouDis = Convert.ToDecimal((item.Length - 300m) / (frontPanelKaKouNo - 1)) / 1000m;
//新风面板螺丝孔数量及间距
int frontPanelHoleNo = (int)((item.Length - 300m) / 900m) + 2;
decimal frontPanelHoleDis = Convert.ToDecimal((item.Length - 300) / (frontPanelHoleNo - 1)) / 1000m;
//新风CJ孔数量和新风CJ孔第一个CJ距离边缘距离
int frontCjNo = (int)((item.Length - 30m) / 32m) + 1;
decimal frontCjFirstDis = Convert.ToDecimal((item.Length - (frontCjNo - 1) * 32m) / 2) / 1000m;
//Midroof灯板螺丝孔数量及第二个孔距离边缘距离,灯板顶面吊装槽钢螺丝孔位距离
int midRoofHoleNo = (int)((item.Length - 300m) / 400m);
decimal midRoofSecondHoleDis = Convert.ToDecimal((item.Length - (midRoofHoleNo - 1) * 400m) / 2) / 1000m;
decimal midRoofTopHoleDis =
Convert.ToDecimal(item.Deepth - 535m - 360m - 90m -
(int)((item.Deepth - 535m - 360m - 90m - 100m) / 50m) * 50m) / 1000m;
//KSA数量，KSA侧板长度(以全长计算)水洗烟罩KSA在三角板内侧，减去3mm
int ksaNo = (int)((item.Length - 2m) / 498m);
decimal ksaSideLength = Convert.ToDecimal((item.Length - 3m - ksaNo * 498m) / 2) / 1000m;
//MESH侧板长度(除去排风三角板3mm计算)
decimal meshSideLength = Convert.ToDecimal((item.Length - 3m - (int)((item.Length - 2m) / 498m) * 498m) / 2) / 1000m;
//侧板CJ孔整列到烟罩底部
int sidePanelDownCjNo = (int)((item.Deepth - 95m) / 32m);
//非水洗烟罩KV/UV
//int sidePanelSideCjNo = (int)((item.Deepth - 305m) / 32m);
//水洗烟罩KW/UW
int sidePanelSideCjNo = (int)((item.Deepth - 380m) / 32m);
try
{
//----------Top Level----------
//烟罩深度
swModel.Parameter("D1@Distance77").SystemValue = item.Deepth / 1000m;
//灯板加强筋
if (item.Deepth > 1649m && ((item.LightType == "FSLONG" && item.Length > 1900m) ||
(item.LightType == "FSSHORT" && item.Length > 1500m) || (item.Length > 2000m)))
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHM0006-3"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHM0006-2"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Base-Flange1").SystemValue = item.Deepth / 1000m - 898m / 1000m;
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHM0006-3"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHM0006-2"));
swComp.SetSuppression2(0); //2解压缩，0压缩
}
//----------排风腔----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHE0070-1"));
swPart = swComp.GetModelDoc2();//打开零件3
swPart.Parameter("D2@Base-Flange1").SystemValue = item.Length / 1000m;
swPart.Parameter("D2@Sketch9").SystemValue = midRoofSecondHoleDis;
if (midRoofHoleNo == 1)
{
swFeat = swComp.FeatureByName("LPattern1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("LPattern1");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@LPattern1").SystemValue = midRoofHoleNo;
}
//排风口
//if (item.ExNo == 1)
//{
swFeat = swComp.FeatureByName("EXCOONE");
swFeat.SetSuppression2(1, 2, configNames);
//swFeat = swComp.FeatureByName("EXCOTWO");
//swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//swPart.Parameter("D4@Sketch11").SystemValue = item.ExRightDis / 1000m;
swPart.Parameter("D2@Sketch4").SystemValue = item.ExLength / 1000m;
swPart.Parameter("D3@Sketch4").SystemValue = item.ExWidth / 1000m;
//}
//else
//{
// swFeat = swComp.FeatureByName("EXCOONE");
// swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
// swFeat = swComp.FeatureByName("EXCOTWO");
// swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
// swPart.Parameter("D5@Sketch12").SystemValue = item.ExRightDis / 1000m;
// swPart.Parameter("D4@Sketch12").SystemValue = item.ExDis / 1000m;
// swPart.Parameter("D1@Sketch12").SystemValue = item.ExLength / 1000m;
// swPart.Parameter("D2@Sketch12").SystemValue = item.ExWidth / 1000m;
//}
//下水口/上排水
if (item.Outlet == "LEFT")
{
swFeat = swComp.FeatureByName("DRAINPIPE-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("DRAINPIPE-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AUTODRAIN LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AUTODRAIN RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else if (item.Outlet == "RIGHT")
{
swFeat = swComp.FeatureByName("DRAINPIPE-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("DRAINPIPE-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AUTODRAIN LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AUTODRAIN RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else if (item.Outlet == "UPLEFT")
{
swFeat = swComp.FeatureByName("DRAINPIPE-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("DRAINPIPE-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AUTODRAIN LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AUTODRAIN RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else if (item.Outlet == "UPRIGHT")
{
swFeat = swComp.FeatureByName("DRAINPIPE-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("DRAINPIPE-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AUTODRAIN LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AUTODRAIN RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("DRAINPIPE-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("DRAINPIPE-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AUTODRAIN LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AUTODRAIN RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//背靠背
if (item.BackToBack == "YES")
{
swFeat = swComp.FeatureByName("BACKTOBACK");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("BACKTOBACK");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//进水口
if (item.Inlet == "LEFT")
{
swFeat = swComp.FeatureByName("DRWATER INLET-L");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("DRWATER INLET-R");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else if (item.Inlet == "RIGHT")
{
swFeat = swComp.FeatureByName("DRWATER INLET-L");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("DRWATER INLET-R");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("DRWATER INLET-L");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("DRWATER INLET-R");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//ANSUL
if (item.ANSUL == "YES")
{
//侧喷
if (item.ANSide == "LEFT")
{
swFeat = swComp.FeatureByName("ANSUL-LEFT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else if (item.ANSide == "RIGHT")
{
swFeat = swComp.FeatureByName("ANSUL-RIGHT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("ANSUL-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANSUL-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
//----------排风腔前面板----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHE0071-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D2@Base-Flange1").SystemValue = item.Length / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHE0074-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.Length - 7.5m) / 1000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHE0088-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.Length - 7.5m) / 1000m;
//----------排风滑门/导轨----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0013-2"));
if (item.ExWidth == 300m)
{
swComp.SetSuppression2(0); //2解压缩，0压缩
}
else
{
swComp.SetSuppression2(2); //2解压缩，0压缩
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0013-1"));
if (item.ExWidth == 300m)
{
swComp.SetSuppression2(0); //2解压缩，0压缩
}
else
{
swComp.SetSuppression2(2);//2解压缩，0压缩
swPart = swComp.GetModelDoc2();
swPart.Parameter("D1@Sketch1").SystemValue = (item.ExLength / 2 + 10m) / 1000m;
swPart.Parameter("D2@Sketch1").SystemValue = (item.ExWidth + 40m) / 1000m;
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0018-2"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0018-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swPart = swComp.GetModelDoc2();
if (item.ExNo == 1)
{
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.ExLength * 2 + 100m) / 1000m;
}
else
{
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.ExLength * 3 + item.ExDis + 100m) / 1000m;
}
//----------排风脖颈----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHE0089-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D2@Base-Flange1").SystemValue = item.ExLength / 1000m;
swPart.Parameter("D2@Sketch1").SystemValue = item.ExHeight / 1000m;
//swFeat = swComp.FeatureByName("ANSUL");
//if (item.ANSUL == "YES") swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
//else swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHE0090-1"));
swComp.SetSuppression2(2);//2解压缩，0压缩
swPart = swComp.GetModelDoc2();
swPart.Parameter("D1@Sketch1").SystemValue = (item.ExWidth - 2.5m) / 1000m;
swPart.Parameter("D2@Sketch1").SystemValue = item.ExHeight / 1000m;
//----------排风腔内部零件----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHE0075-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.Length - 113m) / 2000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHE0078-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.Length - 170m) / 2000m;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHE0079-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D2@Base-Flange1").SystemValue = (item.Length - 200m) / 2000m;
//----------灯具----------
//日光灯
if (item.LightType == "FSLONG")
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201020410-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201020409-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
}
else if (item.LightType == "FSSHORT")
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201020410-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201020409-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201020410-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201020409-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
}
//----------MiddleRoof灯板----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHM0001-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D1@草图1").SystemValue = (item.Length - 4m) / 1000m;
swPart.Parameter("D2@草图1").SystemValue = (item.Deepth - 424m) / 1000m;
swPart.Parameter("D1@草图6").SystemValue = (item.Deepth - 651m) / 1000m;
swPart.Parameter("D3@草图25").SystemValue = midRoofTopHoleDis;
swPart.Parameter("D2@草图26").SystemValue = (item.Deepth - 595m) / 3000;
swPart.Parameter("D1@Sketch3").SystemValue = midRoofSecondHoleDis - 2m / 1000m;
swFeat = swComp.FeatureByName("NAMEPLATE");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LPattern1");
if (midRoofHoleNo == 1)
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@LPattern1").SystemValue = midRoofHoleNo;
}
//灯具
if (item.LightType == "LED60")
{
swFeat = swComp.FeatureByName("LED140");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LPattern3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("FSLONG");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("FSSHORT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LED60");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
if (item.LEDSpotNo == 1)
{
swPart.Parameter("D2@Sketch1").SystemValue = 0;
}
else
{
swPart.Parameter("D2@Sketch1").SystemValue = (item.LEDSpotDis * (item.LEDSpotNo / 2m - 1) + item.LEDSpotDis / 2m) / 1000m;
swFeat = swComp.FeatureByName("LPattern2");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@LPattern2").SystemValue = item.LEDSpotNo;
swPart.Parameter("D3@LPattern2").SystemValue = item.LEDSpotDis / 1000m;
}
}
else if (item.LightType == "LED60")
{
swFeat = swComp.FeatureByName("LED60");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LPattern2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("FSLONG");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("FSSHORT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LED140");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
if (item.LEDSpotNo == 1)
{
swPart.Parameter("D5@Sketch7").SystemValue = 0;
}
else
{
swPart.Parameter("D5@Sketch7").SystemValue = (item.LEDSpotDis * (item.LEDSpotNo / 2m - 1) + item.LEDSpotDis / 2m) / 1000m;
swFeat = swComp.FeatureByName("LPattern3");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@LPattern3").SystemValue = item.LEDSpotNo;
swPart.Parameter("D3@LPattern3").SystemValue = item.LEDSpotDis / 1000m;
}
}
else if (item.LightType == "FSLONG")
{
swFeat = swComp.FeatureByName("LED60");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LPattern2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LED140");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LPattern3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("FSLONG");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("FSSHORT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else if (item.LightType == "FSSHORT")
{
swFeat = swComp.FeatureByName("LED60");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LPattern2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LED140");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LPattern3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("FSLONG");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("FSSHORT");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat = swComp.FeatureByName("LED60");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LPattern2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LED140");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LPattern3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("FSLONG");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("FSSHORT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//ANSUL
if (item.ANSUL == "YES")
{
swFeat = swComp.FeatureByName("AN1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AN2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AN3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AN4");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AN5");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC4");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC5");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//下喷
if (item.ANDropNo > 0)
{
swFeat = swComp.FeatureByName("AN1");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch11").SystemValue = item.ANDropDis1 / 1000m;
swPart.Parameter("D3@Sketch11").SystemValue = (item.ANYDis - 360m) / 1000m;
}
if (item.ANDropNo > 1)
{
swFeat = swComp.FeatureByName("AN2");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch12").SystemValue = item.ANDropDis2 / 1000m;
}
if (item.ANDropNo > 2)
{
swFeat = swComp.FeatureByName("AN3");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch13").SystemValue = item.ANDropDis3 / 1000m;
}
if (item.ANDropNo > 3)
{
swFeat = swComp.FeatureByName("AN4");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch14").SystemValue = item.ANDropDis4 / 1000m;
}
if (item.ANDropNo > 4)
{
swFeat = swComp.FeatureByName("AN5");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch15").SystemValue = item.ANDropDis5 / 1000m;
}
//探测器
if (item.ANDetectorNo > 0)
{
swFeat = swComp.FeatureByName("ANDTEC1");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch31").SystemValue = item.ANDetectorDis1 / 1000m;
if (item.ANDetectorEnd == "LEFT" || (item.ANDetectorEnd == "RIGHT" && item.ANDetectorNo == 1))
{
swPart.Parameter("D2@Sketch31").SystemValue = 195m / 1000m;
}
else
{
swPart.Parameter("D2@Sketch31").SystemValue = 175m / 1000m;
}
}
if (item.ANDetectorNo > 1)
{
swFeat = swComp.FeatureByName("ANDTEC2");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch32").SystemValue = item.ANDetectorDis2 / 1000m;
if (item.ANDetectorEnd == "RIGHT" && item.ANDetectorNo == 2)
{
swPart.Parameter("D2@Sketch32").SystemValue = 195m / 1000m;
}
else
{
swPart.Parameter("D2@Sketch32").SystemValue = 175m / 1000m;
}
}
if (item.ANDetectorNo > 2)
{
swFeat = swComp.FeatureByName("ANDTEC3");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch33").SystemValue = item.ANDetectorDis3 / 1000m;
if (item.ANDetectorEnd == "RIGHT" && item.ANDetectorNo == 3)
{
swPart.Parameter("D2@Sketch33").SystemValue = 195m / 1000m;
}
else
{
swPart.Parameter("D2@Sketch33").SystemValue = 175m / 1000m;
}
}
if (item.ANDetectorNo > 3)
{
swFeat = swComp.FeatureByName("ANDTEC4");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch34").SystemValue = item.ANDetectorDis4 / 1000m;
if (item.ANDetectorEnd == "RIGHT" && item.ANDetectorNo == 4)
{
swPart.Parameter("D2@Sketch34").SystemValue = 195m / 1000m;
}
else
{
swPart.Parameter("D2@Sketch34").SystemValue = 175m / 1000m;
}
}
if (item.ANDetectorNo > 4)
{
swFeat = swComp.FeatureByName("ANDTEC5");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch35").SystemValue = item.ANDetectorDis5 / 1000m;
if (item.ANDetectorEnd == "RIGHT" && item.ANDetectorNo == 5)
{
swPart.Parameter("D2@Sketch35").SystemValue = 195m / 1000m;
}
else
{
swPart.Parameter("D2@Sketch35").SystemValue = 175m / 1000m;
}
}
}
else
{
swFeat = swComp.FeatureByName("AN1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AN2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AN3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AN4");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("AN5");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//UW/KW HOOD 水洗烟罩探测器在midRoof上，非水洗烟罩压缩
swFeat = swComp.FeatureByName("ANDTEC1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC4");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("ANDTEC5");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//开方孔，UV或待MARVEL时解压
swFeat = swComp.FeatureByName("CUT-BACK-LEFT");
if (item.MARVEL == "YES")
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swFeat = swComp.FeatureByName("CUT-BACK-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("CUT-FRONT-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//UV灯线缆穿孔
swFeat = swComp.FeatureByName("UVCABLE");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//CMOD NTC Sensor
swFeat = swComp.FeatureByName("NTC Sensor");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
//----------吊装槽钢----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2900100001-1"));
swPart = swComp.GetModelDoc2();
if (item.ANSUL == "YES")
{
swPart.Parameter("D2@基体-法兰1").SystemValue = (item.Deepth - 250) / 1000m;
}
else
{
swPart.Parameter("D2@基体-法兰1").SystemValue = (item.Deepth - 100m) / 1000m;
}
//----------大侧板----------
if (item.SidePanel == "BOTH")
{
//LEFT
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0001-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swPart = swComp.GetModelDoc2();
swPart.Parameter("D1@草图1").SystemValue = item.Deepth / 1000m;
swPart.Parameter("D1@阵列(线性)1").SystemValue = sidePanelSideCjNo;
swPart.Parameter("D1@阵列(线性)2").SystemValue = sidePanelDownCjNo;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0002-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swPart = swComp.GetModelDoc2();
swPart.Parameter("D1@草图1").SystemValue = (item.Deepth - 79m) / 1000m;
//RIGHT
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0003-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swPart = swComp.GetModelDoc2();
swPart.Parameter("D1@草图1").SystemValue = item.Deepth / 1000m;
swPart.Parameter("D1@阵列(线性)1").SystemValue = sidePanelSideCjNo;
swPart.Parameter("D1@阵列(线性)2").SystemValue = sidePanelDownCjNo;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0004-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swPart = swComp.GetModelDoc2();
swPart.Parameter("D1@草图1").SystemValue = (item.Deepth - 79m) / 1000m;
}
else if (item.SidePanel == "LEFT")
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0003-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0004-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0001-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swPart = swComp.GetModelDoc2();
swPart.Parameter("D1@草图1").SystemValue = item.Deepth / 1000m;
swPart.Parameter("D1@阵列(线性)1").SystemValue = sidePanelSideCjNo;
swPart.Parameter("D1@阵列(线性)2").SystemValue = sidePanelDownCjNo;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0002-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swPart = swComp.GetModelDoc2();
swPart.Parameter("D1@草图1").SystemValue = (item.Deepth - 79m) / 1000m;
}
else if (item.SidePanel == "RIGHT")
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0001-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0002-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0003-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swPart = swComp.GetModelDoc2();
swPart.Parameter("D1@草图1").SystemValue = item.Deepth / 1000m;
swPart.Parameter("D1@阵列(线性)1").SystemValue = sidePanelSideCjNo;
swPart.Parameter("D1@阵列(线性)2").SystemValue = sidePanelDownCjNo;
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0004-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩
swPart = swComp.GetModelDoc2();
swPart.Parameter("D1@草图1").SystemValue = (item.Deepth - 79m) / 1000m;
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0001-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0002-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0003-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0004-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0005-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHS0006-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩
}
//------------I型新风腔主体----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHA0001-2"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D2@基体-法兰1").SystemValue = item.Length / 1000m;
swPart.Parameter("D1@阵列(线性)1").SystemValue = frontPanelKaKouNo;
swPart.Parameter("D3@阵列(线性)1").SystemValue = frontPanelKaKouDis;
swPart.Parameter("D3@Sketch3").SystemValue = midRoofSecondHoleDis;
swPart.Parameter("D9@草图7").SystemValue = 200m / 1000m - midRoofTopHoleDis;
swFeat = swComp.FeatureByName("LPattern1");
if (midRoofHoleNo == 1)
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@LPattern1").SystemValue = midRoofHoleNo;
}
//MARVEL
if (item.MARVEL == "YES")
{
if (item.IRNo > 0)
{
swFeat = swComp.FeatureByName("MA1");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D3@Sketch14").SystemValue = item.IRDis1 / 1000m;
swFeat = swComp.FeatureByName("MACABLE1");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch17").SystemValue = item.IRDis1 / 1000m;
}
if (item.IRNo > 1)
{
swFeat = swComp.FeatureByName("MA2");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D3@Sketch15").SystemValue = item.IRDis2 / 1000m;
swFeat = swComp.FeatureByName("MACABLE2");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch18").SystemValue = item.IRDis2 / 1000m;
}
if (item.IRNo > 2)
{
swFeat = swComp.FeatureByName("MA3");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D3@Sketch16").SystemValue = item.IRDis3 / 1000m;
swFeat = swComp.FeatureByName("MACABLE3");
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@Sketch19").SystemValue = item.IRDis3 / 1000m;
}
}
else
{
swFeat = swComp.FeatureByName("MA1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("MA2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("MA3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("MACABLE1");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("MACABLE2");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("MACABLE3");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//UV HOOD
swFeat = swComp.FeatureByName("SUCABLE-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("JUNCTION BOX-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//----------新风前面板----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHA0003-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D1@草图1").SystemValue = (item.Length - 3m) / 1000m;
swPart.Parameter("D1@阵列(线性)7").SystemValue = frontPanelKaKouNo;
swPart.Parameter("D3@阵列(线性)7").SystemValue = frontPanelKaKouDis;
swPart.Parameter("D1@LPattern1").SystemValue = frontPanelHoleNo;
swPart.Parameter("D3@LPattern1").SystemValue = frontPanelHoleDis;
//----------新风底部CJ孔板----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNHA0002-1"));
swPart = swComp.GetModelDoc2();
swPart.Parameter("D2@基体-法兰1").SystemValue = item.Length / 1000m;
swPart.Parameter("D1@CJHOLES").SystemValue = frontCjNo;
swPart.Parameter("D10@草图8").SystemValue = frontCjFirstDis;
swPart.Parameter("D1@LPattern1").SystemValue = frontPanelHoleNo;
swPart.Parameter("D3@LPattern1").SystemValue = frontPanelHoleDis;
swFeat = swComp.FeatureByName("BLUETOOTH");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("LOGO");
if (item.LEDlogo == "YES")
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
//集水翻边
swFeat = swComp.FeatureByName("DRAINCHANNEL-RIGHT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
swFeat = swComp.FeatureByName("DRAINCHANNEL-LEFT");
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
//----------LOGO----------
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2900300005-1"));
if (item.LEDlogo == "YES")
{
swComp.SetSuppression2(2); //2解压缩，0压缩
}
else
{
swComp.SetSuppression2(0); //2解压缩，0压缩
}
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5201010401-1"));
if (item.LEDlogo == "YES")
{
swComp.SetSuppression2(2); //2解压缩，0压缩
}
else
{
swComp.SetSuppression2(0); //2解压缩，0压缩
}
swModel.ForceRebuild3(true); //设置成true，直接更新顶层，速度很快，设置成false，每个零件都会更新，很慢
swModel.Save(); //保存，很耗时间
swApp.CloseDoc(packedAssyPath); //关闭，很快
}
catch (Exception ex)
{
throw new Exception(packedAssyPath + "作图过程发生异常，详细：" + ex.Message);
}
finally
{
swApp.CommandInProgress = false; //及时关闭外部命令调用，否则影响SolidWorks的使用
}
}