//Call this to create a new instance of this listener class, rather than the constructor
public static SocketListenerSvr CreateNew(string remoteSocketListenerSvrName, string port, bool bindtoany, string passkey)
{
SocketListenerSvr _SocketListenerSvr = null;
if (Sox.AppMode == AppMode.None)
{
if (Sox.IsNumeric_uint(port))
{
_SocketListenerSvr = new SocketListenerSvr(remoteSocketListenerSvrName, port, bindtoany, passkey);
if (_SocketListenerSvr != null)
{
Sox.AppMode = AppMode.NewListner;
}
}
else
{
Sox.Instance.Log(
"Invalid Port string for listener service.",
NotifyType.ErrorMessage);
}
}
else
{
Sox.Instance.Log(
"Unable to create SocketListner. Incorrect AppMode.",
NotifyType.ErrorMessage);
}
return(_SocketListenerSvr);
}
public static void CloseSockets()
{
if (Sox.AppMode == AppMode.None)
{
Sox.Instance.Log(
"No instantiated socket to close.",
NotifyType.WarningMessage);
}
else
{
Sox.CancelActions();
//SocketClientServer.WaitForToken();
object outValue;
if (CoreApplication.Properties.TryGetValue("clientDataWriter", out outValue))
{
// Remove the data writer from the list of application properties as we are about to close it.
CoreApplication.Properties.Remove("clientDataWriter");
DataWriter dataWriter = (DataWriter)outValue;
// To reuse the socket with another data writer, the application must detach the stream from the
// current writer before disposing it. This is added for completeness, as this sample closes the socket
// in the very next block.
dataWriter.DetachStream();
dataWriter.Dispose();
}
if (CoreApplication.Properties.TryGetValue("clientSocket", out outValue))
{
// Remove the socket from the list of application properties as we are about to close it.
CoreApplication.Properties.Remove("clientSocket");
StreamSocket socket = (StreamSocket)outValue;
// StreamSocket.Close() is exposed through the Dispose() method in C#.
// The call below explicitly closes the socket.
socket.Dispose();
}
if (CoreApplication.Properties.TryGetValue("listener", out outValue))
{
// Remove the listener from the list of application properties as we are about to close it.
CoreApplication.Properties.Remove("listener");
StreamSocketListener listener = (StreamSocketListener)outValue;
// StreamSocketListener.Close() is exposed through the Dispose() method in C#.
// The call below explicitly closes the socket.
listener.Dispose();
}
CoreApplication.Properties.Remove("connected");
CoreApplication.Properties.Remove("adapter");
CoreApplication.Properties.Remove("serverAddress");
Sox.Instance.Log("Socket and listener closed", NotifyType.StatusMessage);
Sox.AppMode = AppMode.None;
}
Sox.AppMode = AppMode.None;
}
private async Task NotifyUserFromAsyncThread(string strMessage, NotifyType type)
{
Sox.StartToken();
await Windows.ApplicationModel.Core.CoreApplication.MainView.CoreWindow.Dispatcher.RunAsync(CoreDispatcherPriority.Normal,
() =>
{
Sox.Instance.Log(strMessage, type);
}).AsTask(Sox.CancelToken);
}
public SocketClient(string remoteSocketListenerSvrName, string port, bool bindtoany)
{
if (Sox.IsNumeric_uint(port))
{
RemoteSocketListenerSvrName = remoteSocketListenerSvrName;
PortOrServicenameForListener = port;
}
else
{
Sox.Instance.Log(
"Invalid Port string for client.",
NotifyType.ErrorMessage);
}
}
//We only use this constructor:
public SocketListenerSvr(string remoteSocketListenerSvrName, string port, bool bindtoany, string passkey)
{
Passkey = passkey;
if (Sox.IsNumeric_uint(port))
{
BindToAny_IsChecked = bindtoany;
RemoteSocketListenerSvrName = remoteSocketListenerSvrName;
PortOrServicenameForListener = port;
//Hook up a local ListenerConnection Event handler
this.ListenerConnection += SocketListenerSvr_ListenerConnection;
}
else
{
Sox.Instance.Log(
"Invalid Port string for listener service.",
NotifyType.ErrorMessage);
}
}
/// <summary>
/// Invoked once a connection is accepted by StreamSocketListener.
/// </summary>
/// <param name="sender">The listener that accepted the connection.</param>
/// <param name="args">Parameters associated with the accepted connection.</param>
private async void OnConnection(
StreamSocketListener sender,
StreamSocketListenerConnectionReceivedEventArgs args)
{
DataReader reader = new DataReader(args.Socket.InputStream);
try
{
//Windows.Storage.Streams.Buffer Out = new Windows.Storage.Streams.Buffer(100);
//await args.Socket.OutputStream.WriteAsync(Out);
while (true)
{
// Read first 4 bytes (length of the subsequent string).
Sox.StartToken();
uint sizeFieldCount = await reader.LoadAsync(sizeof(uint)).AsTask(Sox.CancelToken);
if (sizeFieldCount != sizeof(uint))
{
// The underlying socket was closed before we were able to read the whole data.
return;
}
// Read the string.
uint stringLength = reader.ReadUInt32();
Sox.StartToken();
uint actualStringLength = await reader.LoadAsync(stringLength).AsTask(Sox.CancelToken);
if (stringLength != actualStringLength)
{
// The underlying socket was closed before we were able to read the whole data.
return;
}
string data = reader.ReadString(actualStringLength);
await NotifyUserFromAsyncThread(
String.Format("Received data: \"{0}\"", data),
NotifyType.StatusMessage);
//data should be the string Passkey + comamnd char + Parameter string (can be "")
//If of that format that get the command and parameter and fire the ListenerConnection Event
if (data.Length > 0)
{
if (data.Length >= Passkey.Length)
{
if (Passkey == data.Substring(0, Passkey.Length))
{
char command = data[Passkey.Length];
string param = "";
if (data.Length > Passkey.Length + 1)
{
param = data.Substring(Passkey.Length + 1);
}
string msg = string.Format("(InConnection) Command: '{0}' Param= \"{1}\" recvd", command, param);
Sox.Instance.Log(msg, NotifyType.StatusMessage);
//Fire the ListenerConnection Event
await Windows.ApplicationModel.Core.CoreApplication.MainView.CoreWindow.Dispatcher.RunAsync(CoreDispatcherPriority.Normal,
() =>
{
ListenerConnection.Invoke(command, param);
}).AsTask(Sox.CancelToken);
}
else
{
Sox.Instance.Log("Null Command recvd.", NotifyType.StatusMessage);
}
}
else
{
Sox.Instance.Log("Null Message recvd.", NotifyType.ErrorMessage);
}
}
else
{
Sox.Instance.Log("Null data recvd.", NotifyType.ErrorMessage);
}
}
}
catch (TaskCanceledException)
{
Sox.Instance.Log("Cancelled.", NotifyType.StatusMessage);
}
catch (Exception exception)
{
// If this is an unknown status it means that the error is fatal and retry will likely fail.
if (SocketError.GetStatus(exception.HResult) == SocketErrorStatus.Unknown)
{
throw;
}
await NotifyUserFromAsyncThread(
"Read stream failed with error: " + exception.Message,
NotifyType.ErrorMessage);
}
}
/// <summary>
/// This is the click handler for the 'StartListener' button.
/// </summary>
/// <param name="sender">Object for which the event was generated.</param>
/// <param name="e">Event's parameters.</param>
public async void StartListener()
{
if (Sox.AppMode != AppMode.NewListner)
{
if (Sox.AppMode == AppMode.ListenerStarted)
{
Sox.Instance.Log(
"Start listening failed with warning: App Listener Socket already started",
NotifyType.WarningMessage);
}
else
{
Sox.Instance.Log(
"Start listening failed with error: App not in Listner Mode",
NotifyType.ErrorMessage);
}
}
else
{
// Overriding the listener here is safe as it will be deleted once all references to it are gone.
// However, in many cases this is a dangerous pattern to override data semi-randomly (each time user
// clicked the button) so we block it here.
if (CoreApplication.Properties.ContainsKey("listener"))
{
Sox.Instance.Log(
"This step has already been executed.",
NotifyType.ErrorMessage);
return;
}
if (String.IsNullOrEmpty(PortOrServicenameForListener))
{
Sox.Instance.Log("Please provide a service name.", NotifyType.ErrorMessage);
return;
}
CoreApplication.Properties.Remove("serverAddress");
LocalHostItem selectedLocalHost = null;
if ((BindToAddress_IsChecked == true) || (BindToAdapter_IsChecked == true))
{
selectedLocalHost = new LocalHostItem(RemoteSocketListenerSvrName);
if (selectedLocalHost == null)
{
Sox.Instance.Log("Please select an address / adapter.", NotifyType.ErrorMessage);
return;
}
// The user selected an address. For demo purposes, we ensure that connect will be using the same
// address.
CoreApplication.Properties.Add("serverAddress", selectedLocalHost.LocalHost.CanonicalName);
}
StreamSocketListener listener = new StreamSocketListener();
listener.ConnectionReceived += OnConnection;
// If necessary, tweak the listener's control options before carrying out the bind operation.
// These options will be automatically applied to the connected StreamSockets resulting from
// incoming connections (i.e., those passed as arguments to the ConnectionReceived event handler).
// Refer to the StreamSocketListenerControl class' MSDN documentation for the full list of control options.
listener.Control.KeepAlive = false;
// Start listen operation.
try
{
if (BindToAny_IsChecked == true)
{
// Don't limit traffic to an address or an adapter.
Sox.StartToken();
await listener.BindServiceNameAsync(PortOrServicenameForListener).AsTask(Sox.CancelToken);
Sox.Instance.Log("Listening", NotifyType.StatusMessage);
}
else if (BindToAddress_IsChecked == true)
{
// Try to bind to a specific address.
Sox.StartToken();
await listener.BindEndpointAsync(selectedLocalHost.LocalHost, PortOrServicenameForListener).AsTask(Sox.CancelToken);
Sox.Instance.Log(
"Listening on address " + selectedLocalHost.LocalHost.CanonicalName,
NotifyType.StatusMessage);
Sox.Instance.Log(
"On Port " + PortOrServicenameForListener,
NotifyType.StatusMessage);
}
else if (BindToAdapter_IsChecked == true)
{
// Try to limit traffic to the selected adapter.
// This option will be overridden by interfaces with weak-host or forwarding modes enabled.
NetworkAdapter selectedAdapter = selectedLocalHost.LocalHost.IPInformation.NetworkAdapter;
// For demo purposes, ensure that we use the same adapter in the client connect scenario.
CoreApplication.Properties.Add("adapter", selectedAdapter);
Sox.StartToken();
await listener.BindServiceNameAsync(
PortOrServicenameForListener,
SocketProtectionLevel.PlainSocket,
selectedAdapter).AsTask(Sox.CancelToken);
Sox.Instance.Log(
"Listening on adapter " + selectedAdapter.NetworkAdapterId,
NotifyType.StatusMessage);
}
// Save the socket, so subsequent steps can use it.
CoreApplication.Properties.Add("listener", listener);
Sox.AppMode = AppMode.ListenerStarted;
}
catch (TaskCanceledException)
{
Sox.Instance.Log("Cancelled.", NotifyType.StatusMessage);
Sox.AppMode = AppMode.NewListner;
if (CoreApplication.Properties.ContainsKey("listener"))
{
// Remove the listener from the list of application properties as it wasn't connected.
CoreApplication.Properties.Remove("listener");
}
}
catch (Exception exception)
{
if (CoreApplication.Properties.ContainsKey("listener"))
{
// Remove the listener from the list of application properties as it wasn't connected.
CoreApplication.Properties.Remove("listener");
}
Sox.AppMode = AppMode.NewListner;
// If this is an unknown status it means that the error is fatal and retry will likely fail.
if (SocketError.GetStatus(exception.HResult) == SocketErrorStatus.Unknown)
{
throw;
}
Sox.Instance.Log(
"Start listening failed with error: " + exception.Message,
NotifyType.ErrorMessage);
}
}
}
/// <summary>
/// This is the click handler for the 'SendHello' button.
/// </summary>
/// <param name="sender">Object for which the event was generated.</param>
/// <param name="e">Event's parameters.</param>
public async Task <bool> Send(string SendData)
{
if (Sox.AppMode != AppMode.ClientSocketReadyToSend)
{
if (Sox.AppMode == AppMode.ClientSocketConnected)
{
Sox.Instance.Log(
"Client send failed with warning: App Client Socket connected but not ready to send.",
NotifyType.ErrorMessage);
}
else
{
Sox.Instance.Log(
"Client send failed with error: App not in new Client Ready To Send Mode",
NotifyType.ErrorMessage);
}
return(false);
}
string stringToSend = SendData;// "Hello";
if (!CoreApplication.Properties.ContainsKey("connected"))
{
Sox.Instance.Log("Client not connected.", NotifyType.ErrorMessage);
return(false);
}
else
{
object outValue;
StreamSocket socket;
if (!CoreApplication.Properties.TryGetValue("clientSocket", out outValue))
{
Sox.Instance.Log("Client socket not enabled.", NotifyType.ErrorMessage);
return(false);
}
else
{
socket = (StreamSocket)outValue;
// Create a DataWriter if we did not create one yet. Otherwise use one that is already cached.
DataWriter writer;
if (!CoreApplication.Properties.TryGetValue("clientDataWriter", out outValue))
{
writer = new DataWriter(socket.OutputStream);
CoreApplication.Properties.Add("clientDataWriter", writer);
}
else
{
writer = (DataWriter)outValue;
}
// Write first the length of the string as UINT32 value followed up by the string.
// Writing data to the writer will just store data in memory.
string actualStringToSend = Passkey + stringToSend;
writer.WriteUInt32(writer.MeasureString(actualStringToSend));
writer.WriteString(actualStringToSend);
// Write the locally buffered data to the network.
try
{
Sox.StartToken();
await writer.StoreAsync().AsTask(Sox.CancelToken);
SendOutput = "\"" + stringToSend + "\" sent successfully.";
}
catch (TaskCanceledException)
{
Sox.Instance.Log("Canceled.", NotifyType.StatusMessage);
return(false);
}
catch (Exception exception)
{
// If this is an unknown status it means that the error if fatal and retry will likely fail.
if (SocketError.GetStatus(exception.HResult) == SocketErrorStatus.Unknown)
{
throw;
}
Sox.Instance.Log("Send failed with error: " + exception.Message, NotifyType.ErrorMessage);
return(false);
}
}
}
return(true);
}
/// <summary>
/// This is the click handler for the 'ConnectSocket' button.
/// </summary>
/// <param name="sender">Object for which the event was generated.</param>
/// <param name="e">Event's parameters.</param>
public async Task ConnectSocket()
{
if (Sox.AppMode != AppMode.NewClient)
{
if (Sox.AppMode == AppMode.ClientSocketConnected)
{
Sox.Instance.Log(
"Start client failed with warning: App Client Socket already connected",
NotifyType.WarningMessage);
}
else
{
Sox.Instance.Log(
"Start client failed with error: App not in new Client Mode",
NotifyType.ErrorMessage);
}
}
else
{
HostName hostName = null;
if (CoreApplication.Properties.ContainsKey("clientSocket"))
{
Sox.Instance.Log(
"This step has already been executed.",
NotifyType.ErrorMessage);
//return;
}
else
{
if (string.IsNullOrEmpty(PortOrServicenameForListener)) //(String.IsNullOrEmpty(ServiceNameForConnect))
{
Sox.Instance.Log("Please provide a service name.", NotifyType.ErrorMessage);
//return;
}
else
{
bool returnNow = false;
if (string.IsNullOrEmpty(RemoteSocketListenerSvrName)) //(String.IsNullOrEmpty(ServiceNameForConnect))
{
Sox.Instance.Log("Please provide a server name.", NotifyType.ErrorMessage);
//return;
returnNow = true;
}
// By default 'HostNameForConnect' is disabled and host name validation is not required. When enabling the
// text box validating the host name is required since it was received from an untrusted source
// (user input). The host name is validated by catching ArgumentExceptions thrown by the HostName
// constructor for invalid input.
else
{
try
{
hostName = new HostName(RemoteSocketListenerSvrName);// HostNameForConnect.Text);
}
catch (TaskCanceledException)
{
Sox.Instance.Log("Canceled.", NotifyType.StatusMessage);
}
catch (ArgumentException)
{
Sox.Instance.Log("Error: Invalid host name.", NotifyType.ErrorMessage);
//return;
returnNow = true;
}
}
if (!returnNow)
{
StreamSocket socket = new StreamSocket();
// If necessary, tweak the socket's control options before carrying out the connect operation.
// Refer to the StreamSocketControl class' MSDN documentation for the full list of control options.
socket.Control.KeepAlive = false;
try
{
if (adapter == null)
{
Sox.Instance.Log("Connecting to: " + hostName.DisplayName, NotifyType.StatusMessage);
Sox.Instance.Log("On Port: " + PortOrServicenameForListener, NotifyType.StatusMessage);
Sox.StartToken();
// Connect to the server (by default, the listener we created in the previous step).
await socket.ConnectAsync(hostName, PortOrServicenameForListener).AsTask(Sox.CancelToken);
Sox.Instance.Log("Connected", NotifyType.StatusMessage);
CoreApplication.Properties.Add("clientSocket", socket);
}
else
{
Sox.Instance.Log(
"Connecting to: " + RemoteSocketListenerSvrName +
" using network adapter " + adapter.NetworkAdapterId,
NotifyType.StatusMessage);
// Connect to the server (by default, the listener we created in the previous step)
// limiting traffic to the same adapter that the user specified in the previous step.
// This option will be overridden by interfaces with weak-host or forwarding modes enabled.
Sox.StartToken();
await socket.ConnectAsync(
hostName,
PortOrServicenameForListener,// ServiceNameForConnect.Text,
SocketProtectionLevel.PlainSocket,
adapter).AsTask(Sox.CancelToken);
// Save the socket, so subsequent steps can use it.
Sox.Instance.Log(
"Connected using network adapter " + adapter.NetworkAdapterId,
NotifyType.StatusMessage);
}
// Mark the socket as connected. Set the value to null, as we care only about the fact that the
// property is set.
CoreApplication.Properties.Add("connected", null);
}
catch (TaskCanceledException)
{
if (CoreApplication.Properties.ContainsKey("connected"))
{
CoreApplication.Properties.Remove("connected");
}
Sox.AppMode = AppMode.NewClient;
Sox.Instance.Log("Cancelled.", NotifyType.StatusMessage);
}
catch (Exception exception)
{
if (CoreApplication.Properties.ContainsKey("connected"))
{
CoreApplication.Properties.Remove("connected");
}
Sox.AppMode = AppMode.NewClient;
// If this is an unknown status it means that the error is fatal and retry will likely fail.
if (SocketError.GetStatus(exception.HResult) == SocketErrorStatus.Unknown)
{
throw;
}
Sox.Instance.Log("Connect failed with error: " + exception.Message, NotifyType.ErrorMessage);
}
}
}
}
}
}
public Sox()
{
Instance = this;
IsPairing = false;
}
public static void Start()
{
var log = new Sox();
AppMode = AppMode.None;
}