public void TransferFileDatToSaveDBDat(string CarType,
DateTime today,
bool ifNG,
string item,
double[] CurrentStandardTolerance,
string MarkCode,
ZessiDatFromZessiFile zessiFileDat,
ref ZessiDatFinalAdd2DB zessiSave2DBDat)
{
zessiSave2DBDat.zessiCarType = CarType;// zessiFileDat.zessiSerialNumber
zessiSave2DBDat.datetime = today;
zessiSave2DBDat.zessiSerialNumber_SaveToDB = zessiFileDat.zessiSerialNumber;
zessiSave2DBDat.zessiMarkCode_SaveToDB = MarkCode;//zessiFileDat.zessiMarkCode = "GN15-5019-A3B 1802012004"; // 该码值是测试用的
if (ifNG)
{
zessiSave2DBDat.NGnumber = 0;
}
else
{
zessiSave2DBDat.NGnumber = 1;
}
zessiSave2DBDat.Item = item;
zessiSave2DBDat.AllMeasurePoint_SaveToDB = zessiFileDat.AllMeasurePoint;
zessiSave2DBDat.AllMeasurePoint_Tol_SaveToDB = CurrentStandardTolerance;
}
public bool[] On_ReadFromZessiFile(string zessiFileLoad_Path1,
DataGridView dgvDatFromZessiFile,
ref string errorstr,
ref ZessiDatFromZessiFile zessi_DatFromZessiFile,
ref bool m_bIfZessiFileHavProblem,
ref bool m_bZessiMissDetect,
ref bool m_bTolCompareResult)
{
#region 读xml并解析数据 //string xmlFileLoad = "C:\\[1]SimaticNetProj\\[2]蔡司数据\\GN15-5019-A3B 1801221710_20180122091952 - 副本.xml";
//var strPath = Path.Combine("E:\渝江下位机\",xmlFileLoad);
zessi_DatFromZessiFile.AllMeasurePoint_str = new string[MeasurePoint * 3];
zessi_DatFromZessiFile.AllMeasurePoint = new double[MeasurePoint * 3];
zessi_DatFromZessiFile.AllMeasurePoint_Tol = new double[MeasurePoint * 3 * 2];
zessi_DatFromZessiFile.AllMeasurePoint_Tol_str = new string[MeasurePoint * 3 * 2];
zessi_DatFromZessiFile.AllTolerace_CompareResults = new bool[MeasurePoint * 3];
bool[] returnValues = { true, false }; // 比较ok,是否有异常
//bool m_bTolCompareResult = true;
try
{
//1. 调用数据库函数,获取每个点每个坐标的标准上下公差值
// 暂时模拟
//2. 对共享文件夹进行访问，对xml文件件数量进行判断
/// <summary>
/// 2.1共享文件夹访问
/// "\\Dell_caffe-pc\\zessi_data\\GN15-5019-A3B 1801221710_20180122091952.xml";
string zessiFileLoad_Path = "";
//DirectoryInfo ZessiFileDirInfo = new DirectoryInfo(SharedFloder_Path);//(@"\\192.168.2.174\\zessi_data"); // SharedFloder_Path
FInfos = codedirinfo.GetFiles(); // 获取文件夹中的所有文件
// 保存文件的路径
if (FInfos.Count() == 1)
{
zessiFileLoad_Path = SharedFloder_Path + "\\" + FInfos[0].Name;
}
else if (FInfos.Count() > 1)
{
string extension = "";
int XML_num = 0;
for (int i = 0; i < FInfos.Count(); i++)
{
extension = System.IO.Path.GetExtension(FInfos[i].DirectoryName + "\\" + FInfos[i].Name);
if (extension == ".xml")
{
XML_num = XML_num + 1;
zessiFileLoad_Path = FInfos[i].DirectoryName + "\\" + FInfos[i].Name;
}
}
if (XML_num == 1)
{
zessiFileLoad_Path = zessiFileLoad_Path;
}
else
{
m_bIfZessiFileHavProblem = true;
throw new Exception("开始读Zessi文件:ZESSI文件数量异常-" + "数量为:" + XML_num.ToString() + "\n\n建议检查文件生成步骤或重新开始流程/n");
}
}
else if (FInfos.Count() == 0)
{
m_bIfZessiFileHavProblem = true;
throw new Exception("开始读Zessi文件:\n找不到Zessi默认生成目录: " + SharedFloder_Path + " 下的文件\n");
}
// 2.2文件夹内xml文件的判断
//3.获取xml文件并分析
XElement xe = XElement.Load(@zessiFileLoad_Path); // 加载xml文件 使用linq从xml文件中查询信息
var XMLLL = from pinfo in xe.Elements("HEADER") // 只能顺着找到MEASUREMENTS下面的2个节点：HEADER和MEASDATA RESOURCE
select new
{
工件序列号 = pinfo.Element("PART").Element("PARTIDENTNR").Attribute("value").Value
};
//dgvDatFromZessiFile.DataSource = XMLLL.ToList();
zessi_DatFromZessiFile.zessiSerialNumber = xe.Element("HEADER").Element("PART").Element("PARTIDENTNR").Attribute("value").Value;
var measvaluect = from mpinfo in xe.Element("MEASDATA").Element("MEASURES").Elements("MEASVALUECT")
where mpinfo.Element("MEASPOINT").Attribute("value").Value.Contains("P")
select mpinfo;
//where PInfo.Attribute("RESOURCE").Value // Collections中
int measpoint_idx = 0;
int measpoint_idx_temp = 0;
foreach (XElement xxe in measvaluect) // 25个元素
{
measpoint_idx_temp++; //++measpoint_idx; // 马上自加
if (measpoint_idx_temp >= 33) // 达到点数量的最大值后就退出
{ /*return;*/
}
if (measpoint_idx_temp >= 15 && measpoint_idx_temp <= 22) // 在中间混入了建坐标所用的点--这里的15是凭印象写
{ // measpoint_idx_temp是第*项(从序号14(第15项)开始,序号21(第22项)结束)
continue; // 是无关点则继续
}
if (measpoint_idx_temp >= 23) // 找到了后面的可测点,为了保证测量点顺序的一致性,将前面紧接顺序的索引赋值给measpoint_idx
{ // 要从第15项开始(但是要以序号的形式表示:14)-- 23-8=15
measpoint_idx = measpoint_idx_temp - 8 - 1; // 15-1=14
}
else if (measpoint_idx_temp >= 0 && measpoint_idx_temp < 15)
{
measpoint_idx = measpoint_idx_temp - 1; // 以序号形式表示
}
// 文件中还有Element X_FAILURE
measvaluect_failure = xxe.Nodes();
string xnd_ss = null;
foreach (XNode xnd in measvaluect_failure)
{
xnd_ss = xnd.ToString();
}
if (xnd_ss.Contains("_FAILURE"))
{
m_bZessiMissDetect = true;
errorstr = "第" + (measpoint_idx + 1).ToString() + "个检测点漏检,请对照报告检查.\n";
zessi_DatFromZessiFile.AllMeasurePoint_str[3 * measpoint_idx] = "9999"; //xxe.Element("X_FAILURE").Attribute("value").Value.ToString();
zessi_DatFromZessiFile.AllMeasurePoint_str[3 * measpoint_idx + 1] = "9999"; //xxe.Element("Y_FAILURE").Attribute("value").Value.ToString();
zessi_DatFromZessiFile.AllMeasurePoint_str[3 * measpoint_idx + 2] = "9999"; //xxe.Element("Z_FAILURE").Attribute("value").Value.ToString();
}
else //measvaluect_failure[0]
{
zessi_DatFromZessiFile.AllMeasurePoint_str[3 * measpoint_idx] = xxe.Element("X").Attribute("value").Value.ToString();
zessi_DatFromZessiFile.AllMeasurePoint_str[3 * measpoint_idx + 1] = xxe.Element("Y").Attribute("value").Value.ToString();
zessi_DatFromZessiFile.AllMeasurePoint_str[3 * measpoint_idx + 2] = xxe.Element("Z").Attribute("value").Value.ToString();
}
zessi_DatFromZessiFile.AllMeasurePoint[3 * measpoint_idx] = Convert.ToDouble(zessi_DatFromZessiFile.AllMeasurePoint_str[3 * measpoint_idx]);
zessi_DatFromZessiFile.AllMeasurePoint[3 * measpoint_idx + 1] = Convert.ToDouble(zessi_DatFromZessiFile.AllMeasurePoint_str[3 * measpoint_idx + 1]);
zessi_DatFromZessiFile.AllMeasurePoint[3 * measpoint_idx + 2] = Convert.ToDouble(zessi_DatFromZessiFile.AllMeasurePoint_str[3 * measpoint_idx + 2]);
// 公差模拟获取 - 用标准公差值代替
zessi_DatFromZessiFile.AllMeasurePoint_Tol[6 * measpoint_idx] = Form_AdvancedFunc.B515_Standard_Tolerance[6 * measpoint_idx]; //= 0.3;
zessi_DatFromZessiFile.AllMeasurePoint_Tol[6 * measpoint_idx + 1] = Form_AdvancedFunc.B515_Standard_Tolerance[6 * measpoint_idx + 1]; //= -0.3;
zessi_DatFromZessiFile.AllMeasurePoint_Tol[6 * measpoint_idx + 2] = Form_AdvancedFunc.B515_Standard_Tolerance[6 * measpoint_idx + 2]; //= 0.3;
zessi_DatFromZessiFile.AllMeasurePoint_Tol[6 * measpoint_idx + 3] = Form_AdvancedFunc.B515_Standard_Tolerance[6 * measpoint_idx + 3]; //= -0.3;
zessi_DatFromZessiFile.AllMeasurePoint_Tol[6 * measpoint_idx + 4] = Form_AdvancedFunc.B515_Standard_Tolerance[6 * measpoint_idx + 4]; //= 0.3;
zessi_DatFromZessiFile.AllMeasurePoint_Tol[6 * measpoint_idx + 5] = Form_AdvancedFunc.B515_Standard_Tolerance[6 * measpoint_idx + 5]; //= -0.3;
// 进行公差比较
if (((Math.Abs(zessi_DatFromZessiFile.AllMeasurePoint[3 * measpoint_idx]) < Math.Abs(zessi_DatFromZessiFile.AllMeasurePoint_Tol[6 * measpoint_idx])) && (Math.Abs(zessi_DatFromZessiFile.AllMeasurePoint[3 * measpoint_idx]) < Math.Abs(zessi_DatFromZessiFile.AllMeasurePoint_Tol[6 * measpoint_idx + 1])))
)
{
zessi_DatFromZessiFile.AllTolerace_CompareResults[3 * measpoint_idx] = true;
}
else
{
zessi_DatFromZessiFile.AllTolerace_CompareResults[3 * measpoint_idx] = false;
}
if (
((Math.Abs(zessi_DatFromZessiFile.AllMeasurePoint[3 * measpoint_idx + 1]) < Math.Abs(zessi_DatFromZessiFile.AllMeasurePoint_Tol[6 * measpoint_idx + 2])) && (Math.Abs(zessi_DatFromZessiFile.AllMeasurePoint[3 * measpoint_idx + 1]) < Math.Abs(zessi_DatFromZessiFile.AllMeasurePoint_Tol[6 * measpoint_idx + 3])))
)
{
zessi_DatFromZessiFile.AllTolerace_CompareResults[3 * measpoint_idx + 1] = true;
}
else
{
zessi_DatFromZessiFile.AllTolerace_CompareResults[3 * measpoint_idx + 1] = false;
}
if (
((Math.Abs(zessi_DatFromZessiFile.AllMeasurePoint[3 * measpoint_idx + 2]) < Math.Abs(zessi_DatFromZessiFile.AllMeasurePoint_Tol[6 * measpoint_idx + 4])) && (Math.Abs(zessi_DatFromZessiFile.AllMeasurePoint[3 * measpoint_idx + 2]) < Math.Abs(zessi_DatFromZessiFile.AllMeasurePoint_Tol[6 * measpoint_idx + 5])))
)
{
zessi_DatFromZessiFile.AllTolerace_CompareResults[3 * measpoint_idx + 2] = true;
}
else
{
zessi_DatFromZessiFile.AllTolerace_CompareResults[3 * measpoint_idx + 2] = false;
}
//++measpoint_idx;// 等语句完成后，再自加
//if (measpoint_idx >= 25)
//{
// continue;
//}
}
if (measpoint_idx_temp < 33) //25 + 8 = 33
{
m_bIfZessiFileHavProblem = true;
//throw new Exception("Zessi检测有效点的数量为:" + measpoint_idx_temp.ToString() + "\n请检查是否存在漏检情况!");
errorstr = errorstr + "Zessi检测有效点的数量为:" + measpoint_idx_temp.ToString() + ".请检查是否存在漏检情况!\n";
}
m_bTolCompareResult = true;
for (int i = 0; i < zessi_DatFromZessiFile.AllTolerace_CompareResults.Length; i++)
{
if (zessi_DatFromZessiFile.AllTolerace_CompareResults[i] == false)
{
m_bTolCompareResult = false;
continue;
}
}
#region 测试
//CodeOriginal_FromFile = "GN15-5019-A3B1707171030";
//tbx_OriginalCode.Text = CodeOriginal_FromFile;
//CodePLCSend1st = "";
//CodePLCSend2nd = "";
//byte[] CodeOriginal_FromExcel_Byte =
//int CodeOriginal_int;
//CodeOriginal_int = System.Text.Encoding.ASCII.GetBytes(CodeOriginal_FromFile, 0, CodeOriginal_FromFile.Length, CodeOriginal_FromExcel_Byte, 0);
//static void ReadParseXml2()
//{
// XmlDocument xmlDoc = new XmlDocument();
// xmlDoc.Load("E:/Data/VisualStudio/C#/app001/ConsoleApp/App01/userlist.xml");
// //查找<users>
// XmlNode root = xmlDoc.SelectSingleNode("users");
// //获取到所有<users>的子节点
// XmlNodeList nodeList = xmlDoc.SelectSingleNode("users").ChildNodes;
// //遍历所有子节点
// foreach (XmlNode xn in nodeList)
// {
// XmlElement xe = (XmlElement)xn;
// Console.WriteLine("节点的ID为： " + xe.GetAttribute("id"));
// XmlNodeList subList = xe.ChildNodes;
// foreach (XmlNode xmlNode in subList)
// {
// Console.WriteLine(xmlNode.InnerText);
// }
// }
//}
//for (int i = 0; i < values.Length; i++)
//{
// if (i >= 5 && i <= 44)
// values[i] = CodeOriginal_FromExcel_Byte[i - 5];// 给第一次DB5-44存
// else if (i < 5)
// {
// values[0] = true; values[1] = false; values[2] = false;
// values[3] = false; values[4] = false;
// }
// else
// {
// values[i] = 0;
// }
// //m_itmServerHandles_local[i] = i + 4;
//}
//int zessi_CompareResults_Sum = -1;
//for (int i = 0; i < zessi_OffsetsValFromZESSIFile.Length; i++)
//{
// if (Math.Abs(zessi_OffsetsValFromZESSIFile[i]) >
// Math.Abs(zessi_StandardTolerance[i]))
// { // 超出范围--比较ng
// zessi_ToleranceCompareResults[i] = 1;
// }
// else
// { zessi_ToleranceCompareResults[i] = 0; }
// zessi_CompareResults_Sum = zessi_CompareResults_Sum + zessi_ToleranceCompareResults[i];
//}
//// 公差ok-ng比较
//if (zessi_CompareResults_Sum > 0)
//{//公差比较ng
// WriteAsyncToOPCOtherBoolVar(27, true); // X3.3 公差比较NG信号 序号27
// // 弹出公差比较失败界面，进行操作
// Form_ToleranceCompareNG F_TC = new Form_ToleranceCompareNG();
// F_TC.Show();
// while (!F_TC.IsDisposed)
// {
// Application.DoEvents();
// this.Enabled = false;
// }
// this.Enabled = true;
//}
//else if (zessi_CompareResults_Sum == 0)
//{// 公差比较ok
// WriteAsyncToOPCOtherBoolVar(20, true); // X2.4 公差比较ok信号 序号20
//}
#endregion
returnValues[0] = m_bTolCompareResult;
returnValues[1] = false;
return(returnValues);
}
catch (Exception exx)
{
m_bIfZessiFileHavProblem = true;
MessageBox.Show(exx.Message);
returnValues[0] = m_bTolCompareResult;
returnValues[1] = true;
return(returnValues);
//throw exx;
}
#endregion
}
public void TBX_Dat_Disp(List <TextBox> TextBox_list,
List <TextBox> TextBox_list_Sub4,
List <GroupBox> GrpBox_list,
List <GroupBox> GrpBox_list_Sub4,
double[] CurrentStandardTolerance,
ZessiDatFromZessiFile zessi_DatFromZessiFile_Struct_local)
{
try
{
for (int tbxl_idx = 0; tbxl_idx < TextBox_list.Count; tbxl_idx++) //75ge
{
// 12 20
if ((tbxl_idx >= 39 && tbxl_idx <= 47))// == 4 || tbxl_idx == 5 || tbxl_idx == 6)
{
TextBox_list[tbxl_idx].Text
= TextBox_list_Sub4[tbxl_idx - 39].Text
= zessi_DatFromZessiFile_Struct_local.AllMeasurePoint[tbxl_idx].ToString("F2");
} // 24 26
else if ((tbxl_idx >= 51 && tbxl_idx <= 53)) //9 10 11
{
TextBox_list[tbxl_idx].Text
= TextBox_list_Sub4[tbxl_idx - 42].Text
= zessi_DatFromZessiFile_Struct_local.AllMeasurePoint[tbxl_idx].ToString("F2");
}
else
{
TextBox_list[tbxl_idx].Text
= zessi_DatFromZessiFile_Struct_local.AllMeasurePoint[tbxl_idx].ToString("F2");
}
if (((tbxl_idx + 1) % 3) == 0) // 3的倍数才进来
{ //2 5 8 11
//double CTol_Z_Up = Math.Abs(CurrentStandardTolerance[tbxl_idx * 2]);//4
//double CTol_Z_Dn = Math.Abs(CurrentStandardTolerance[tbxl_idx * 2 + 1]);//5
//double CTol_Y_Up = Math.Abs(CurrentStandardTolerance[(tbxl_idx - 1) * 2]);//2
//double CTol_Y_Dn = Math.Abs(CurrentStandardTolerance[(tbxl_idx - 1) * 2 + 1]);//3
//double CTol_X_Up = Math.Abs(CurrentStandardTolerance[(tbxl_idx - 2) * 2]);//0
//double CTol_X_Dn = Math.Abs(CurrentStandardTolerance[(tbxl_idx - 2) * 2 + 1]);//1
if (((Math.Abs(zessi_DatFromZessiFile_Struct_local.AllMeasurePoint[tbxl_idx]) < Math.Abs(CurrentStandardTolerance[tbxl_idx * 2])) && Math.Abs(zessi_DatFromZessiFile_Struct_local.AllMeasurePoint[tbxl_idx]) < Math.Abs(CurrentStandardTolerance[tbxl_idx * 2 + 1])) &&
((Math.Abs(zessi_DatFromZessiFile_Struct_local.AllMeasurePoint[tbxl_idx - 1]) < Math.Abs(CurrentStandardTolerance[(tbxl_idx - 1) * 2])) && Math.Abs(zessi_DatFromZessiFile_Struct_local.AllMeasurePoint[tbxl_idx - 1]) < Math.Abs(CurrentStandardTolerance[(tbxl_idx - 1) * 2 + 1])) &&
((Math.Abs(zessi_DatFromZessiFile_Struct_local.AllMeasurePoint[tbxl_idx - 2]) < Math.Abs(CurrentStandardTolerance[(tbxl_idx - 2) * 2])) && Math.Abs(zessi_DatFromZessiFile_Struct_local.AllMeasurePoint[tbxl_idx - 2]) < Math.Abs(CurrentStandardTolerance[(tbxl_idx - 2) * 2 + 1])))
{
if ((tbxl_idx >= 39 && tbxl_idx <= 47)) //12 20
{
GrpBox_list_Sub4[(tbxl_idx - 39) / 3].BackColor = //12
GrpBox_list[tbxl_idx / 3].BackColor =
System.Drawing.Color.LimeGreen;
}
else if ((tbxl_idx >= 51 && tbxl_idx <= 53)) // 24 26
{
GrpBox_list_Sub4[(tbxl_idx - 42) / 3].BackColor = //15
GrpBox_list[tbxl_idx / 3].BackColor =
System.Drawing.Color.LimeGreen;
}
else
{
GrpBox_list[tbxl_idx / 3].BackColor =
System.Drawing.Color.LimeGreen;
}
}
else//Grp变红
{
// 每3个点对应一个group
if ((tbxl_idx >= 39 && tbxl_idx <= 47))
{
GrpBox_list_Sub4[(tbxl_idx - 39) / 3].BackColor =
GrpBox_list[tbxl_idx / 3].BackColor =
System.Drawing.Color.Peru;
}
else if ((tbxl_idx >= 51 && tbxl_idx <= 47))
{
GrpBox_list_Sub4[(tbxl_idx - 42) / 3].BackColor =
GrpBox_list[tbxl_idx / 3].BackColor =
System.Drawing.Color.Peru;
}
else
{
GrpBox_list[tbxl_idx / 3].BackColor = System.Drawing.Color.Peru;
}
}
if ((Math.Abs(zessi_DatFromZessiFile_Struct_local.AllMeasurePoint[tbxl_idx]) == 9999) &&
(Math.Abs(zessi_DatFromZessiFile_Struct_local.AllMeasurePoint[tbxl_idx - 1]) == 9999) &&
(Math.Abs(zessi_DatFromZessiFile_Struct_local.AllMeasurePoint[tbxl_idx - 2]) == 9999))
{
if ((tbxl_idx >= 39 && tbxl_idx <= 47))
{
GrpBox_list_Sub4[(tbxl_idx - 39) / 3].BackColor =
GrpBox_list[tbxl_idx / 3].BackColor =
System.Drawing.Color.Red;
}
else if ((tbxl_idx >= 51 && tbxl_idx <= 53))
{
GrpBox_list_Sub4[(tbxl_idx - 42) / 3].BackColor =
GrpBox_list[tbxl_idx / 3].BackColor =
System.Drawing.Color.Red;
}
else
{
GrpBox_list[tbxl_idx / 3].BackColor = System.Drawing.Color.Red;
}
}
}
else
{
}
// 每次都进来--专门用来判断单点
if (((Math.Abs(zessi_DatFromZessiFile_Struct_local.AllMeasurePoint[tbxl_idx]) < Math.Abs(CurrentStandardTolerance[tbxl_idx * 2])) &&
Math.Abs(zessi_DatFromZessiFile_Struct_local.AllMeasurePoint[tbxl_idx]) < Math.Abs(CurrentStandardTolerance[tbxl_idx * 2 + 1])))
{
if ((tbxl_idx >= 39 && tbxl_idx <= 47))// == 4 || tbxl_idx == 5 || tbxl_idx == 6)
{
//Font newFont = new Font(TextBox_list[tbxl_idx].Font, FontStyle.Bold);
//TextBox_list[tbxl_idx].Font = newFont;
TextBox_list[tbxl_idx].ForeColor
= TextBox_list_Sub4[tbxl_idx - 39].ForeColor
= System.Drawing.Color.Black;
}
else if ((tbxl_idx >= 51 && tbxl_idx <= 53)) //9 10 11
{
TextBox_list[tbxl_idx].ForeColor
= TextBox_list_Sub4[tbxl_idx - 42].ForeColor
= System.Drawing.Color.Black;
}
else
{
TextBox_list[tbxl_idx].ForeColor = System.Drawing.Color.Black;
}
}
else//字体加粗变红
{
if ((tbxl_idx >= 39 && tbxl_idx <= 47))// == 4 || tbxl_idx == 5 || tbxl_idx == 6)
{
//Font newFont = new Font(TextBox_list[tbxl_idx].Font, FontStyle.Bold);
//TextBox_list[tbxl_idx].Font = newFont;
TextBox_list[tbxl_idx].ForeColor =
TextBox_list_Sub4[tbxl_idx - 39].ForeColor
= System.Drawing.Color.Red;
}
else if ((tbxl_idx >= 51 && tbxl_idx <= 53)) //9 10 11
{
TextBox_list[tbxl_idx].ForeColor
= TextBox_list_Sub4[tbxl_idx - 42].ForeColor
= System.Drawing.Color.Red;
}
else
{
TextBox_list[tbxl_idx].ForeColor = System.Drawing.Color.Red;
}
}
}
}
catch (Exception)
{
throw (new Exception("填充tbx异常"));
}
}