Esempio n. 1
0
        private IPolyline ReadPolyline(ref CodeValuePair code)
        {
            string handle = string.Empty;
            Layer layer = Layer.Default;
            AciColor color = AciColor.ByLayer;
            LineType lineType = LineType.ByLayer;
            PolylineTypeFlags flags = PolylineTypeFlags.OpenPolyline;
            float elevation = 0.0f;
            float thickness = 0.0f;
            Vector3f normal = Vector3f.UnitZ;
            List<Vertex> vertexes = new List<Vertex>();
            Dictionary<ApplicationRegistry, XData> xData = new Dictionary<ApplicationRegistry, XData>();
            //int numVertexes = -1;
            //int numFaces = -1;

            code = this.ReadCodePair();

            while (code.Code != 0)
            {
                switch (code.Code)
                {
                    case 5:
                        handle = code.Value;
                        code = this.ReadCodePair();
                        break;
                    case 8:
                        layer = this.GetLayer(code.Value);
                        code = this.ReadCodePair();
                        break;
                    case 62:
                        color = new AciColor(short.Parse(code.Value));
                        code = this.ReadCodePair();
                        break;
                    case 6:
                        lineType = this.GetLineType(code.Value);
                        code = this.ReadCodePair();
                        break;
                    case 30:
                        elevation = float.Parse(code.Value);
                        code = this.ReadCodePair();
                        break;
                    case 39:
                        thickness = float.Parse(code.Value);
                        code = this.ReadCodePair();
                        break;
                    case 70:
                        flags = (PolylineTypeFlags) (int.Parse(code.Value));
                        code = this.ReadCodePair();
                        break;
                    case 71:
                        //this field might not exist for polyface meshes, we cannot depend on it
                        //numVertexes = int.Parse(code.Value); code = this.ReadCodePair();
                        code = this.ReadCodePair();
                        break;
                    case 72:
                        //this field might not exist for polyface meshes, we cannot depend on it
                        //numFaces  = int.Parse(code.Value);
                        code = this.ReadCodePair();
                        break;
                    case 210:
                        normal.X = float.Parse(code.Value);
                        code = this.ReadCodePair();
                        break;
                    case 220:
                        normal.Y = float.Parse(code.Value);
                        code = this.ReadCodePair();
                        break;
                    case 230:
                        normal.Z = float.Parse(code.Value);
                        code = this.ReadCodePair();
                        break;
                    case 1001:
                        XData xDataItem = this.ReadXDataRecord(code.Value, ref code);
                        xData.Add(xDataItem.ApplicationRegistry, xDataItem);
                        break;
                    default:
                        if (code.Code >= 1000 && code.Code <= 1071)
                            throw new DxfInvalidCodeValueEntityException(code.Code, code.Value, this.file,
                                                                         "The extended data of an entity must start with the application registry code " + this.fileLine);

                        code = this.ReadCodePair();
                        break;
                }
            }

            //begin to read the vertex list
            if (code.Value != DxfObjectCode.Vertex)
                throw new DxfEntityException(DxfObjectCode.Polyline, this.file, "Vertex not found in line " + this.fileLine);
            while (code.Value != StringCode.EndSequence)
            {
                if (code.Value == DxfObjectCode.Vertex)
                {
                    Debug.Assert(code.Code == 0);
                    Vertex vertex = this.ReadVertex(ref code);
                    vertexes.Add(vertex);
                }
            }

            // read the end end sequence object until a new element is found
            if (code.Value != StringCode.EndSequence)
                throw new DxfEntityException(DxfObjectCode.Polyline, this.file, "End sequence entity not found in line " + this.fileLine);
            code = this.ReadCodePair();
            string endSequenceHandle = string.Empty;
            Layer endSequenceLayer = layer;
            while (code.Code != 0)
            {
                switch (code.Code)
                {
                    case 5:
                        endSequenceHandle = code.Value;
                        code = this.ReadCodePair();
                        break;
                    case 8:
                        endSequenceLayer = this.GetLayer(code.Value);
                        code = this.ReadCodePair();
                        break;
                    default:
                        code = this.ReadCodePair();
                        break;
                }
            }

            IPolyline pol;
            bool isClosed = false;

            if ((flags & PolylineTypeFlags.ClosedPolylineOrClosedPolygonMeshInM) == PolylineTypeFlags.ClosedPolylineOrClosedPolygonMeshInM)
            {
                isClosed = true;
            }

            //to avoid possible error between the vertex type and the polyline type
            //the polyline type will decide which information to use from the read vertex
            if ((flags & PolylineTypeFlags.Polyline3D) == PolylineTypeFlags.Polyline3D)
            {
                List<Polyline3dVertex> polyline3dVertexes = new List<Polyline3dVertex>();
                foreach (Vertex v in vertexes)
                {
                    Polyline3dVertex vertex = new Polyline3dVertex
                                                  {
                                                      Color = v.Color,
                                                      Layer = v.Layer,
                                                      LineType = v.LineType,
                                                      Location = v.Location,
                                                      Handle = v.Handle
                                                  };
                    vertex.XData = v.XData;
                    polyline3dVertexes.Add(vertex);
                }

                ////posible error avoidance, the polyline is marked as polyline3d code:(70,8) but the vertex is marked as PolylineVertex code:(70,0)
                //if (v.Type == EntityType.PolylineVertex)
                //{
                //    Polyline3dVertex polyline3dVertex = new Polyline3dVertex(((PolylineVertex)v).Location.X, ((PolylineVertex)v).Location.Y,0);
                //    polyline3dVertexes.Add(polyline3dVertex);
                //}
                //else
                //{
                //    polyline3dVertexes.Add((Polyline3dVertex)v);
                //}
                //}
                pol = new Polyline3d(polyline3dVertexes, isClosed)
                          {
                              Handle = handle
                          };
                ((Polyline3d) pol).EndSequence.Handle = endSequenceHandle;
                ((Polyline3d) pol).EndSequence.Layer = endSequenceLayer;
            }
            else if ((flags & PolylineTypeFlags.PolyfaceMesh) == PolylineTypeFlags.PolyfaceMesh)
            {
                //the vertex list created contains vertex and face information
                List<PolyfaceMeshVertex> polyfaceVertexes = new List<PolyfaceMeshVertex>();
                List<PolyfaceMeshFace> polyfaceFaces = new List<PolyfaceMeshFace>();
                foreach (Vertex v in vertexes)
                {
                    if ((v.Flags & (VertexTypeFlags.PolyfaceMeshVertex | VertexTypeFlags.Polygon3dMesh)) == (VertexTypeFlags.PolyfaceMeshVertex | VertexTypeFlags.Polygon3dMesh))
                    {
                        PolyfaceMeshVertex vertex = new PolyfaceMeshVertex
                                                        {
                                                            Color = v.Color,
                                                            Layer = v.Layer,
                                                            LineType = v.LineType,
                                                            Location = v.Location,
                                                            Handle = v.Handle
                                                        };
                        vertex.XData = xData;
                        polyfaceVertexes.Add(vertex);
                    }
                    else if ((v.Flags & (VertexTypeFlags.PolyfaceMeshVertex)) == (VertexTypeFlags.PolyfaceMeshVertex))
                    {
                        PolyfaceMeshFace vertex = new PolyfaceMeshFace
                                                      {
                                                          Color = v.Color,
                                                          Layer = v.Layer,
                                                          LineType = v.LineType,
                                                          VertexIndexes = v.VertexIndexes,
                                                          Handle = v.Handle
                                                      };
                        vertex.XData = xData;
                        polyfaceFaces.Add(vertex);
                    }

                    //if (v.Type == EntityType.PolyfaceMeshVertex)
                    //{
                    //    polyfaceVertexes.Add((PolyfaceMeshVertex) v);
                    //}
                    //else if (v.Type == EntityType.PolyfaceMeshFace)
                    //{
                    //    polyfaceFaces.Add((PolyfaceMeshFace) v);
                    //}
                    //else
                    //{
                    //    throw new EntityDxfException(v.Type.ToString(), this.file, "Error in vertex type.");
                    //}
                }
                pol = new PolyfaceMesh(polyfaceVertexes, polyfaceFaces)
                          {
                              Handle = handle
                          };
                ((PolyfaceMesh) pol).EndSequence.Handle = endSequenceHandle;
                ((PolyfaceMesh) pol).EndSequence.Layer = endSequenceLayer;
            }
            else
            {
                List<PolylineVertex> polylineVertexes = new List<PolylineVertex>();
                foreach (Vertex v in vertexes)
                {
                    PolylineVertex vertex = new PolylineVertex
                                                {
                                                    Location = new Vector2f(v.Location.X, v.Location.Y),
                                                    BeginThickness = v.BeginThickness,
                                                    Bulge = v.Bulge,
                                                    Color = v.Color,
                                                    EndThickness = v.EndThickness,
                                                    Layer = v.Layer,
                                                    LineType = v.LineType,
                                                    Handle = v.Handle
                                                };
                    vertex.XData = xData;

                    ////posible error avoidance, the polyline is marked as polyline code:(70,0) but the vertex is marked as Polyline3dVertex code:(70,32)
                    //if (v.Type==EntityType.Polyline3dVertex)
                    //{
                    //    PolylineVertex polylineVertex = new PolylineVertex(((Polyline3dVertex)v).Location.X, ((Polyline3dVertex)v).Location.Y);
                    //    polylineVertexes.Add(polylineVertex);
                    //}
                    //else
                    //{
                    //    polylineVertexes.Add((PolylineVertex) v);
                    //}
                    polylineVertexes.Add(vertex);
                }

                pol = new Polyline(polylineVertexes, isClosed)
                          {
                              Thickness = thickness,
                              Elevation = elevation,
                              Normal = normal,
                              Handle = handle
                          };
                ((Polyline) pol).EndSequence.Handle = endSequenceHandle;
                ((Polyline) pol).EndSequence.Layer = endSequenceLayer;
            }

            pol.Color = color;
            pol.Layer = layer;
            pol.LineType = lineType;
            pol.XData = xData;

            return pol;
        }
Esempio n. 2
0
        private static void WriteDxfFile()
        {
            DxfDocument dxf = new DxfDocument();

            //arc
            Arc arc = new Arc(new Vector3f(10, 10, 0), 10, 45, 135);
            arc.Layer = new Layer("arc");
            arc.Layer.Color.Index = 1;
            dxf.AddEntity(arc);

            //xData sample
            XData xdata = new XData(new ApplicationRegistry("SharpDxf"));
            xdata.XDataRecord.Add(new XDataRecord(XDataCode.String, "extended data with SharpDxf"));
            xdata.XDataRecord.Add(XDataRecord.OpenControlString);
            xdata.XDataRecord.Add(new XDataRecord(XDataCode.WorldSpacePositionX, 0));
            xdata.XDataRecord.Add(new XDataRecord(XDataCode.WorldSpacePositionY, 0));
            xdata.XDataRecord.Add(new XDataRecord(XDataCode.WorldSpacePositionZ, 0));
            xdata.XDataRecord.Add(XDataRecord.CloseControlString);

            XData xdata2 = new XData(new ApplicationRegistry("other application"));
            xdata2.XDataRecord.Add(new XDataRecord(XDataCode.String, "extended data with SharpDxf"));
            xdata2.XDataRecord.Add(XDataRecord.OpenControlString);
            xdata2.XDataRecord.Add(new XDataRecord(XDataCode.String, "string record"));
            xdata2.XDataRecord.Add(new XDataRecord(XDataCode.Real, 15.5));
            xdata2.XDataRecord.Add(new XDataRecord(XDataCode.Long, 350));
            xdata2.XDataRecord.Add(XDataRecord.CloseControlString);

            //circle
            Vector3f extrusion = new Vector3f(1, 1, 1);
            Vector3f centerWCS = new Vector3f(1, 1, 1);
            Vector3d centerOCS = MathHelper.Transform((Vector3d) centerWCS,
                                                      (Vector3d)extrusion,
                                                      MathHelper.CoordinateSystem.World,
                                                      MathHelper.CoordinateSystem.Object);

            Circle circle = new Circle((Vector3f) centerOCS, 5);
            circle.Layer = new Layer("circle with spaces");
            circle.Layer.Color=AciColor.Yellow;
            circle.LineType = LineType.Dashed;
            circle.Normal = extrusion;
            circle.XData=new Dictionary<ApplicationRegistry, XData>
                             {
                                 {xdata.ApplicationRegistry, xdata},
                                 {xdata2.ApplicationRegistry, xdata2}
                             };

            dxf.AddEntity(circle);

            //points
            Point point1 = new Point(new Vector3f(-3, -3, 0));
            point1.Layer = new Layer("point");
            point1.Color = new AciColor(30);
            Point point2 = new Point(new Vector3f(1, 1, 1));
            point2.Layer = point1.Layer;
            point2.Layer.Color.Index = 9;
            point2.Normal = new Vector3f(1, 1, 1);
            dxf.AddEntity(point1);
            dxf.AddEntity(point2);

            //3dface
            Face3d face3D = new Face3d(new Vector3f(-5, -5, 5),
                                       new Vector3f(5, -5, 5),
                                       new Vector3f(5, 5, 5),
                                       new Vector3f(-5, 5, 5));
            face3D.Layer = new Layer("3dface");
            face3D.Layer.Color.Index = 3;
            dxf.AddEntity(face3D);

            //polyline
            PolylineVertex polyVertex;
            List<PolylineVertex> polyVertexes = new List<PolylineVertex>();
            polyVertex = new PolylineVertex(new Vector2f(-50, -50));
            polyVertex.BeginThickness = 2;
            polyVertexes.Add(polyVertex);
            polyVertex = new PolylineVertex(new Vector2f(50, -50));
            polyVertex.BeginThickness = 1;
            polyVertexes.Add(polyVertex);
            polyVertex = new PolylineVertex(new Vector2f(50, 50));
            polyVertex.Bulge = 1;
            polyVertexes.Add(polyVertex);
            polyVertex = new PolylineVertex(new Vector2f(-50, 50));
            polyVertexes.Add(polyVertex);
            Polyline polyline2d = new Polyline(polyVertexes, true);
            polyline2d.Layer = new Layer("polyline2d");
            polyline2d.Layer.Color.Index = 5;
            polyline2d.Normal = new Vector3f(1, 1, 1);
            polyline2d.Elevation = 100.0f;
            dxf.AddEntity(polyline2d);

            //lightweight polyline
            LightWeightPolylineVertex lwVertex;
            List<LightWeightPolylineVertex> lwVertexes = new List<LightWeightPolylineVertex>();
            lwVertex = new LightWeightPolylineVertex(new Vector2f(-25, -25));
            lwVertex.BeginThickness = 2;
            lwVertexes.Add(lwVertex);
            lwVertex = new LightWeightPolylineVertex(new Vector2f(25, -25));
            lwVertex.BeginThickness = 1;
            lwVertexes.Add(lwVertex);
            lwVertex = new LightWeightPolylineVertex(new Vector2f(25, 25));
            lwVertex.Bulge = 1;
            lwVertexes.Add(lwVertex);
            lwVertex = new LightWeightPolylineVertex(new Vector2f(-25, 25));
            lwVertexes.Add(lwVertex);
            LightWeightPolyline lwPolyline = new LightWeightPolyline(lwVertexes, true);
            lwPolyline.Layer = new Layer("lwpolyline");
            lwPolyline.Layer.Color.Index = 5;
            lwPolyline.Normal = new Vector3f(1, 1, 1);
            lwPolyline.Elevation = 100.0f;
            dxf.AddEntity(lwPolyline);

            //line
            Line line = new Line(new Vector3f(0, 0, 0), new Vector3f(10, 10, 10));
            line.Layer = new Layer("line");
            line.Layer.Color.Index = 6;
            dxf.AddEntity(line);

            //3d polyline
            Polyline3dVertex vertex;
            List<Polyline3dVertex> vertexes = new List<Polyline3dVertex>();
            vertex = new Polyline3dVertex(new Vector3f(-50, -50, 0));
            vertexes.Add(vertex);
            vertex = new Polyline3dVertex(new Vector3f(50, -50, 10));
            vertexes.Add(vertex);
            vertex = new Polyline3dVertex(new Vector3f(50, 50, 25));
            vertexes.Add(vertex);
            vertex = new Polyline3dVertex(new Vector3f(-50, 50, 50));
            vertexes.Add(vertex);
            Polyline3d polyline = new Polyline3d(vertexes, true);
            polyline.Layer = new Layer("polyline3d");
            polyline.Layer.Color.Index = 24;
            dxf.AddEntity(polyline);

            //block definition
            Block block = new Block("TestBlock");
            block.Entities.Add(new Line(new Vector3f(-5, -5, 5), new Vector3f(5, 5, 5)));
            block.Entities.Add(new Line(new Vector3f(5, -5, 5), new Vector3f(-5, 5, 5)));

            //insert
            Insert insert = new Insert(block, new Vector3f(5, 5, 5));
            insert.Layer = new Layer("insert");
            insert.Layer.Color.Index = 4;
            dxf.AddEntity(insert);

            //text
            TextStyle style=new TextStyle("True type font","Arial.ttf");
            Text text = new Text("Hello world!", Vector3f.Zero, 10.0f,style);
            text.Layer = new Layer("text");
            text.Layer.Color.Index = 8;
            text.Alignment = TextAlignment.TopRight;
            dxf.AddEntity(text);

            dxf.Save("AutoCad2007.dxf", DxfVersion.AutoCad2007);
            dxf.Save("AutoCad2004.dxf", DxfVersion.AutoCad2004);
            dxf.Save("AutoCad2000.dxf", DxfVersion.AutoCad2000);
            dxf.Save("AutoCad12.dxf", DxfVersion.AutoCad12);
        }