/// <summary>
/// Draw formatted text at the specified position.
/// </summary>
/// <param name="sprite">Reference to an ID3DX10Sprite object that contains the string you wish to draw. Can be NULL, in which case Direct3D will render the string with its own sprite object. To improve efficiency, a sprite object should be specified if ID3DX10Font::DrawText is to be called more than once in a row.</param>
/// <param name="text">Pointer to a string to draw. If UNICODE is defined, this parameter type resolves to an LPCWSTR, otherwise, the type resolves to an LPCSTR. If the Count parameter is -1, the string must be NULL terminated.</param>
/// <param name="x">The x.</param>
/// <param name="y">The y.</param>
/// <param name="color">Color of the text. See <see cref="SharpDX.Color4"/>.</param>
/// <returns>
/// If the function succeeds, the return value is the height of the text in logical units. If DT_VCENTER or DT_BOTTOM is specified, the return value is the offset from pRect (top to the bottom) of the drawn text. If the function fails, the return value is zero.
/// </returns>
/// <unmanaged>int ID3DX10Font::DrawTextW([None] LPD3DX10SPRITE pSprite,[None] const wchar_t* pString,[None] int Count,[None] RECT* pRect,[None] int Format,[None] D3DXCOLOR Color)</unmanaged>
/// <remarks>
/// The parameters of this method are very similar to those of the {{GDI DrawText}} function. This method supports both ANSI and Unicode strings. Unless the DT_NOCLIP format is used, this method clips the text so that it does not appear outside the specified rectangle. All formatting is assumed to have multiple lines unless the DT_SINGLELINE format is specified. If the selected font is too large for the rectangle, this method does not attempt to substitute a smaller font. This method supports only fonts whose escapement and orientation are both zero.
/// </remarks>
/// <unmanaged>int ID3DX10Font::DrawTextW([In] ID3DX10Sprite* pSprite,[In] const wchar_t* pString,[In] int Count,[In] RECT* pRect,[In] unsigned int Format,[In] D3DXCOLOR Color)</unmanaged>
public int DrawText(Sprite sprite, string text, int x, int y, Color4 color)
{
return DrawText(sprite, text, new Rectangle(x, y, 0, 0), FontDrawFlags.NoClip, color);
}
/// <summary>
/// Measures the specified text.
/// </summary>
/// <param name="sprite">Pointer to an <see cref="SharpDX.Direct3D10.Sprite"/> object that contains the string. Can be <c>null</c>, in which case Direct3D will render the string with its own sprite object. To improve efficiency, a sprite object should be specified if DrawText is to be called more than once in a row.</param>
/// <param name="text"><para>Pointer to a string to draw. If the Count parameter is -1, the string must be null-terminated.</para></param>
/// <param name="rect"><para>Pointer to a <see cref="SharpDX.Rectangle"/> structure that contains the rectangle, in logical coordinates, in which the text is to be formatted. The coordinate value of the rectangle's right side must be greater than that of its left side. Likewise, the coordinate value of the bottom must be greater than that of the top.</para></param>
/// <param name="drawFlags"><para> </para><para>Specifies the method of formatting the text. It can be any combination of the following values:</para> ValueMeaning <list> <item><term>DT_BOTTOM</term> </list> <para>Justifies the text to the bottom of the rectangle. This value must be combined with DT_SINGLELINE.</para> <list> <item><term>DT_CALCRECT</term> </list> <para>Determines the width and height of the rectangle. If there are multiple lines of text, DrawText uses the width of the rectangle pointed to by the pRect parameter and extends the base of the rectangle to bound the last line of text. If there is only one line of text, DrawText modifies the right side of the rectangle so that it bounds the last character in the line. In either case, DrawText returns the height of the formatted text but does not draw the text.</para> <list> <item><term>DT_CENTER</term> </list> <para>Centers text horizontally in the rectangle.</para> <list> <item><term>DT_EXPANDTABS</term> </list> <para>Expands tab characters. The default number of characters per tab is eight.</para> <list> <item><term>DT_LEFT</term> </list> <para>Aligns text to the left.</para> <list> <item><term>DT_NOCLIP</term> </list> <para>Draws without clipping. DrawText is somewhat faster when DT_NOCLIP is used.</para> <list> <item><term>DT_RIGHT</term> </list> <para>Aligns text to the right.</para> <list> <item><term>DT_RTLREADING</term> </list> <para>Displays text in right-to-left reading order for bidirectional text when a Hebrew or Arabic font is selected. The default reading order for all text is left-to-right.</para> <list> <item><term>DT_SINGLELINE</term> </list> <para>Displays text on a single line only. Carriage returns and line feeds do not break the line.</para> <list> <item><term>DT_TOP</term> </list> <para>Top-justifies text.</para> <list> <item><term>DT_VCENTER</term> </list> <para>Centers text vertically (single line only).</para> <list> <item><term>DT_WORDBREAK</term> </list> <para>Breaks words. Lines are automatically broken between words if a word would extend past the edge of the rectangle specified by the pRect parameter. A carriage return/line feed sequence also breaks the line.</para> <para>?</para></param>
/// <param name="textHeight">The height of the formatted text but does not draw the text.</param>
/// <returns>Determines the width and height of the rectangle. If there are multiple lines of text, this function uses the width of the rectangle pointed to by the rect parameter and extends the base of the rectangle to bound the last line of text. If there is only one line of text, this method modifies the right side of the rectangle so that it bounds the last character in the line. </returns>
/// <unmanaged>int ID3DX10Font::DrawTextW([In] ID3DX10Sprite* pSprite,[In] const wchar_t* pString,[In] int Count,[In] RECT* pRect,[In] unsigned int Format,[In] D3DXCOLOR Color)</unmanaged>
public unsafe SharpDX.Rectangle MeasureText(Sprite sprite, string text, SharpDX.Rectangle rect, FontDrawFlags drawFlags, out int textHeight)
{
// DT_CALCRECT
textHeight = DrawText(sprite, text, text.Length, new IntPtr(&rect), ((int)drawFlags) | 0x400, Color.White);
return rect;
}
/// <summary>
/// Measures the specified text.
/// </summary>
/// <param name="sprite">Pointer to an <see cref="SharpDX.Direct3D10.Sprite"/> object that contains the string. Can be <c>null</c>, in which case Direct3D will render the string with its own sprite object. To improve efficiency, a sprite object should be specified if DrawText is to be called more than once in a row.</param>
/// <param name="text"><para>Pointer to a string to draw. If the Count parameter is -1, the string must be null-terminated.</para></param>
/// <param name="rect"><para>Pointer to a <see cref="RawRectangle"/> structure that contains the rectangle, in logical coordinates, in which the text is to be formatted. The coordinate value of the rectangle's right side must be greater than that of its left side. Likewise, the coordinate value of the bottom must be greater than that of the top.</para></param>
/// <param name="drawFlags"><para>Specifies the method of formatting the text. It can be any combination of the following values:</para> ValueMeaning <list> <item><term>DT_BOTTOM</term></item> </list> <para>Justifies the text to the bottom of the rectangle. This value must be combined with DT_SINGLELINE.</para> <list> <item><term>DT_CALCRECT</term> </list> <para>Determines the width and height of the rectangle. If there are multiple lines of text, DrawText uses the width of the rectangle pointed to by the pRect parameter and extends the base of the rectangle to bound the last line of text. If there is only one line of text, DrawText modifies the right side of the rectangle so that it bounds the last character in the line. In either case, DrawText returns the height of the formatted text but does not draw the text.</para> <list> <item><term>DT_CENTER</term> </list> <para>Centers text horizontally in the rectangle.</para> <list> <item><term>DT_EXPANDTABS</term> </list> <para>Expands tab characters. The default number of characters per tab is eight.</para> <list> <item><term>DT_LEFT</term> </list> <para>Aligns text to the left.</para> <list> <item><term>DT_NOCLIP</term> </list> <para>Draws without clipping. DrawText is somewhat faster when DT_NOCLIP is used.</para> <list> <item><term>DT_RIGHT</term> </list> <para>Aligns text to the right.</para> <list> <item><term>DT_RTLREADING</term> </list> <para>Displays text in right-to-left reading order for bidirectional text when a Hebrew or Arabic font is selected. The default reading order for all text is left-to-right.</para> <list> <item><term>DT_SINGLELINE</term> </list> <para>Displays text on a single line only. Carriage returns and line feeds do not break the line.</para> <list> <item><term>DT_TOP</term> </list> <para>Top-justifies text.</para> <list> <item><term>DT_VCENTER</term> </list> <para>Centers text vertically (single line only).</para> <list> <item><term>DT_WORDBREAK</term> </list> <para>Breaks words. Lines are automatically broken between words if a word would extend past the edge of the rectangle specified by the pRect parameter. A carriage return/line feed sequence also breaks the line.</para> <para>?</para></param>
/// <returns>Determines the width and height of the rectangle. If there are multiple lines of text, this function uses the width of the rectangle pointed to by the rect parameter and extends the base of the rectangle to bound the last line of text. If there is only one line of text, this method modifies the right side of the rectangle so that it bounds the last character in the line. </returns>
/// <unmanaged>int ID3DX10Font::DrawTextW([In] ID3DX10Sprite* pSprite,[In] const wchar_t* pString,[In] int Count,[In] RECT* pRect,[In] unsigned int Format,[In] D3DXCOLOR Color)</unmanaged>
public unsafe RawRectangle MeasureText(Sprite sprite, string text, RawRectangle rect, FontDrawFlags drawFlags)
{
// DT_CALCRECT
DrawText(sprite, text, text.Length, new IntPtr(&rect), ((int)drawFlags) | 0x400, whiteColor);
return rect;
}
