/// <summary>
/// Sends an RTP event for a DTMF tone as per RFC2833. Sending the event requires multiple packets to be sent.
/// This method will hold onto the socket until all the packets required for the event have been sent. The send
/// can be cancelled using the cancellation token.
/// </summary>
/// <param name="srcRtpSocket">The local RTP socket to send the event from.</param>
/// <param name="dstRtpSocket">The remote RTP socket to send the event to.</param>
/// <param name="rtpEvent">The RTP event to send.</param>
/// <param name="startTimestamp">The RTP timestamp at the start of the event.</param>
/// <param name="samplePeriod">The sample period in milliseconds being used for the media stream that the event
/// is being inserted into. Should be set to 50ms if main media stream is dynamic or sample period is unknown.</param>
/// <param name="timestampStep">The RTP timestamp step corresponding to the sampling period. This can change depending
/// on the codec being used. For example using PCMU with a sampling frequency of 8000Hz the timestamp step
/// for a sample period of 50ms is 400 (8000 / (1000 / 50)). For a sample period of 20ms it's 160 (8000 / (1000 / 20)).</param>
/// <param name="cts">Token source to allow the operation to be cancelled prematurely.</param>
public async Task SendDtmfEvent(Socket srcRtpSocket,
IPEndPoint dstRtpSocket,
RTPEvent rtpEvent,
uint startTimestamp,
ushort samplePeriod,
ushort timestampStep,
CancellationTokenSource cts)
{
try
{
// If only the minimum number of packets are being sent then they are both the start and end of the event.
rtpEvent.EndOfEvent = (rtpEvent.TotalDuration <= timestampStep);
rtpEvent.Duration = timestampStep;
// Send the start of event packets.
for (int i = 0; i < RTPEvent.DUPLICATE_COUNT && !cts.IsCancellationRequested; i++)
{
byte[] buffer = rtpEvent.GetEventPayload();
int markerBit = (i == 0) ? 1 : 0; // Set marker bit for the first packet in the event.
SendRtpPacket(srcRtpSocket, dstRtpSocket, buffer, startTimestamp, markerBit, rtpEvent.PayloadTypeID);
SeqNum++;
PacketsSent++;
}
await Task.Delay(samplePeriod, cts.Token);
if (!rtpEvent.EndOfEvent)
{
// Send the progressive event packets
while ((rtpEvent.Duration + timestampStep) < rtpEvent.TotalDuration && !cts.IsCancellationRequested)
{
rtpEvent.Duration += timestampStep;
byte[] buffer = rtpEvent.GetEventPayload();
SendRtpPacket(srcRtpSocket, dstRtpSocket, buffer, startTimestamp, 0, rtpEvent.PayloadTypeID);
PacketsSent++;
SeqNum++;
await Task.Delay(samplePeriod, cts.Token);
}
// Send the end of event packets.
for (int j = 0; j < RTPEvent.DUPLICATE_COUNT && !cts.IsCancellationRequested; j++)
{
rtpEvent.EndOfEvent = true;
rtpEvent.Duration = rtpEvent.TotalDuration;
byte[] buffer = rtpEvent.GetEventPayload();
SendRtpPacket(srcRtpSocket, dstRtpSocket, buffer, startTimestamp, 0, rtpEvent.PayloadTypeID);
SeqNum++;
PacketsSent++;
}
}
}
catch (System.Net.Sockets.SocketException sockExcp)
{
logger.LogError("SocketException SendDtmfEvent. " + sockExcp.Message);
}
catch (System.Threading.Tasks.TaskCanceledException)
{
logger.LogWarning("SendDtmfEvent was cancelled by caller.");
}
}
/// <summary>
/// Sends an RTP event for a DTMF tone as per RFC2833. Sending the event requires multiple packets to be sent.
/// This method will hold onto the socket until all the packets required for the event have been sent. The send
/// can be cancelled using the cancellation token.
/// </summary>
/// <param name="rtpEvent">The RTP event to send.</param>
/// <param name="cancellationToken">CancellationToken to allow the operation to be cancelled prematurely.</param>
public async Task SendDtmfEvent(
RTPEvent rtpEvent,
CancellationToken cancellationToken)
{
if (m_rtpEventInProgress == true || DestinationEndPoint == null)
{
logger.LogWarning("SendDtmfEvent request ignored as an RTP event is already in progress.");
}
try
{
m_rtpEventInProgress = true;
uint startTimestamp = m_lastRtpTimestamp;
// The sample period in milliseconds being used for the media stream that the event
// is being inserted into. Should be set to 50ms if main media stream is dynamic or
// sample period is unknown.
int samplePeriod = RTP_EVENT_DEFAULT_SAMPLE_PERIOD_MS;
int clockRate = MediaFormat.ClockRate;
// If the clock rate is unknown or dynamic cross our fingers and use 8KHz.
if (clockRate == 0)
{
clockRate = DEFAULT_AUDIO_CLOCK_RATE;
}
// The RTP timestamp step corresponding to the sampling period. This can change depending
// on the codec being used. For example using PCMU with a sampling frequency of 8000Hz and a sample period of 50ms
// the timestamp step is 400 (8000 / (1000 / 50)). For a sample period of 20ms it's 160 (8000 / (1000 / 20)).
ushort rtpTimestampStep = (ushort)(clockRate * samplePeriod / 1000);
// If only the minimum number of packets are being sent then they are both the start and end of the event.
rtpEvent.EndOfEvent = (rtpEvent.TotalDuration <= rtpTimestampStep);
// The DTMF tone is generally multiple RTP events. Each event has a duration of the RTP timestamp step.
rtpEvent.Duration = rtpTimestampStep;
// Send the start of event packets.
for (int i = 0; i < RTPEvent.DUPLICATE_COUNT && !cancellationToken.IsCancellationRequested; i++)
{
byte[] buffer = rtpEvent.GetEventPayload();
int markerBit = (i == 0) ? 1 : 0; // Set marker bit for the first packet in the event.
SendRtpPacket(RtpChannel, DestinationEndPoint, buffer, startTimestamp, markerBit, rtpEvent.PayloadTypeID);
SeqNum++;
}
await Task.Delay(samplePeriod, cancellationToken);
if (!rtpEvent.EndOfEvent)
{
// Send the progressive event packets
while ((rtpEvent.Duration + rtpTimestampStep) < rtpEvent.TotalDuration && !cancellationToken.IsCancellationRequested)
{
rtpEvent.Duration += rtpTimestampStep;
byte[] buffer = rtpEvent.GetEventPayload();
SendRtpPacket(RtpChannel, DestinationEndPoint, buffer, startTimestamp, 0, rtpEvent.PayloadTypeID);
SeqNum++;
await Task.Delay(samplePeriod, cancellationToken);
}
// Send the end of event packets.
for (int j = 0; j < RTPEvent.DUPLICATE_COUNT && !cancellationToken.IsCancellationRequested; j++)
{
rtpEvent.EndOfEvent = true;
rtpEvent.Duration = rtpEvent.TotalDuration;
byte[] buffer = rtpEvent.GetEventPayload();
SendRtpPacket(RtpChannel, DestinationEndPoint, buffer, startTimestamp, 0, rtpEvent.PayloadTypeID);
SeqNum++;
}
}
}
catch (SocketException sockExcp)
{
logger.LogError("SocketException SendDtmfEvent. " + sockExcp.Message);
}
catch (TaskCanceledException)
{
logger.LogWarning("SendDtmfEvent was cancelled by caller.");
}
finally
{
m_rtpEventInProgress = false;
}
}
