/// <summary>
/// Display the combo box at the specified location, or the list box pulled down from the specified location.
/// </summary>
/// <param name="loc"></param>
public void Activate(SIL.FieldWorks.Common.Utils.Rect loc)
{
CheckDisposed();
FwComboBox combo = m_combo as FwComboBox;
if (combo != null)
{
combo.Location = new System.Drawing.Point(loc.left, loc.top);
// 21 is the default height of a combo, the smallest reasonable size.
combo.Size = new System.Drawing.Size(Math.Max(loc.right - loc.left + 30, 200), Math.Max(loc.bottom - loc.top, 50));
if (!m_owner.Controls.Contains(combo))
{
m_owner.Controls.Add(combo);
}
}
else
{
ComboListBox c = (m_combo as ComboListBox);
c.AdjustSize(500, 400); // these are maximums!
c.Launch(m_owner.RectangleToScreen(loc), Screen.GetWorkingArea(m_owner));
}
}
/// --------------------------------------------------------------------------------
/// <summary>
///
/// </summary>
/// <param name="x"></param>
/// <param name="y"></param>
/// <param name="cch"></param>
/// <param name="_rgchw"></param>
/// <param name="uOptions"></param>
/// <param name="_rect"></param>
/// <param name="_rgdx"></param>
/// --------------------------------------------------------------------------------
public void DrawTextExt(int x, int y, int cch, string _rgchw, uint uOptions, ref Rect _rect, int _rgdx)
{
CheckDisposed();
// TODO: Add DummyGraphics.DrawTextExt implementation
}
/// --------------------------------------------------------------------------------
/// <summary>
///
/// </summary>
/// <param name="_pic"></param>
/// <param name="x"></param>
/// <param name="y"></param>
/// <param name="cx"></param>
/// <param name="cy"></param>
/// <param name="xSrc"></param>
/// <param name="ySrc"></param>
/// <param name="cxSrc"></param>
/// <param name="cySrc"></param>
/// <param name="_rcWBounds"></param>
/// --------------------------------------------------------------------------------
public void RenderPicture(stdole.IPicture _pic, int x, int y, int cx, int cy, int xSrc, int ySrc, int cxSrc, int cySrc, ref Rect _rcWBounds)
{
CheckDisposed();
// TODO: Add DummyGraphics.RenderPicture implementation
}
/// --------------------------------------------------------------------------------
/// <summary>
///
/// </summary>
/// <param name="_rcClip"></param>
/// --------------------------------------------------------------------------------
public void SetClipRect(ref Rect _rcClip)
{
CheckDisposed();
// TODO: Add DummyGraphics.SetClipRect implementation
}
/// --------------------------------------------------------------------------------
/// <summary>
///
/// </summary>
/// <param name="rcClip"></param>
/// --------------------------------------------------------------------------------
public void PushClipRect(Rect rcClip)
{
CheckDisposed();
// TODO: Add DummyGraphics.PushClipRect implementation
}
/// -----------------------------------------------------------------------------------
/// <summary>
/// Scroll to the bottom. This is somewhat tricky because after scrolling to the bottom of
/// the range as we currently estimate it, expanding a closure may change things.
/// <seealso cref="GoToEnd"/>
/// </summary>
/// -----------------------------------------------------------------------------------
public virtual void ScrollToEnd()
{
CheckDisposed();
if (DoingScrolling && !DesignMode)
{
// dy gets added to the scroll offset. This means a positive dy causes there to be more
// of the view hidden above the top of the screen. This is the same effect as clicking a
// down arrow, which paradoxically causes the window contents to move up.
int dy = 0;
int ydCurr = -ScrollPosition.Y; // Where the window thinks it is now.
using (new HoldGraphics(this))
{
// This loop repeats until we have figured out a scroll distance AND confirmed
// that we can draw that location without messing things up.
for (; ; )
{
int ydMax = DisplayRectangle.Height - ClientHeight + 1;
dy = ydMax - ydCurr;
// OK, we need to move by dy. But, we may have to expand a lazy box there in order
// to display a whole screen full. If the size estimate is off (which it usually is),
// that would affect the scroll position we need to be at the very bottom.
// To avoid this, we make the same PrepareToDraw call
// that the rendering code will make before drawing after the scroll.
Rectangle rcSrcRoot;
Rectangle rcDstRoot;
GetCoordRects(out rcSrcRoot, out rcDstRoot);
rcDstRoot.Offset(0, -dy);
int dyRange = m_rootb.Height;
Rectangle r = AdjustedClientRectangle;
SIL.FieldWorks.Common.Utils.Rect clipRect = new SIL.FieldWorks.Common.Utils.Rect(r.Left, r.Top, r.Right, r.Bottom);
if (m_graphicsManager.VwGraphics is IVwGraphicsWin32)
((IVwGraphicsWin32)m_graphicsManager.VwGraphics).SetClipRect(ref clipRect);
if (m_rootb != null && (m_dxdLayoutWidth > 0))
PrepareToDraw(rcSrcRoot, rcDstRoot);
ydCurr = -ScrollPosition.Y; // Where the window thinks it is now. (May have changed expanding.)
// If PrepareToDraw didn't change the scroll range, it didn't mess anything up and we
// can use the dy we figured. Otherwise, loop and figure it again with more complete
// information, because something at a relevant point has been expanded to real boxes.
if (m_rootb.Height == dyRange)
break;
dy = 0; // Back to initial state.
}
if (dy != 0)
{
// Update the scroll bar.
// We have to pass a positive value, although ScrollPosition
// returns a negative one
ScrollPosition = new Point(-ScrollPosition.X, ydCurr + dy);
}
}
}
}
/// <summary>
/// Make a combo box appropriate for the specified selection. If fMouseDown is true,
/// do so unconditionally...otherwise (mousemove) only if the new selection is on a different thing.
/// </summary>
/// <param name="vwselNew"></param>
/// <param name="fForce"></param>
private void ShowComboForSelection(IVwSelection vwselNew, bool fMouseDown)
{
// It's a good idea to get this first...it's possible for MakeCombo to leave the selection invalid.
SIL.FieldWorks.Common.Utils.Rect loc;
vwselNew.GetParaLocation(out loc);
if (!fMouseDown)
{
// It's a mouse move.
// If we've moved to somewhere outside any paragraph get rid of the combos.
// But, allow somewhere close, since otherwise it's almost impossible to get
// a combo on an empty string.
SIL.FieldWorks.Common.Utils.Rect locExpanded = loc;
locExpanded.right += 50;
locExpanded.left -= 5;
locExpanded.top -= 2;
locExpanded.bottom += 2;
if (!locExpanded.Contains(m_LastMouseMovePos))
{
HideCombos();
return;
}
// Don't do anything if the current mouse position is in the same paragraph
// as before. Things tend to flicker if we continually create and remove it.
// But, if we've hidden all the combos, go ahead even if at the same position as before...
// otherwise, when we drag off outside the text and return, we may not get any combo.
if (loc.Equals(m_locLastShowCombo) && FirstLineHandler != null)
{
return;
}
}
FinishUpOk(); // Just like OK, if there are pending edits in the combo, do them.
// Changing a different item may result in changes to this one also. This could invalidate
// the selection, in which case, we can't use it.
// Enhance JohnT: might consider trying the current selection, if any, if called from
// MouseDown...that would not be useful if called from hover. But there probably isn't
// a current selection in that case. Could try a selection at the saved mouse position.
if (!vwselNew.IsValid)
return;
m_locLastShowCombo = loc;
m_fMakingCombo = true;
HideCombos();
// No matter what, we are fixin to get rid of the old value.
DisposeComboHandler();
if (!m_fInMouseDrag)
{
m_ComboHandler = InterlinComboHandler.MakeCombo(vwselNew,
this, fMouseDown);
}
else
{
m_ComboHandler = null;
}
m_fMakingCombo = false;
m_fLockCombo = false; // nothing typed in it yet.
if (m_ComboHandler != null)
{
// Set the position of the combo and display it. Do this before synchronizing
// the LexEntry display, which can take a while.
m_ComboHandler.Activate(loc);
m_fMouseDownActivatedCombo = true;
// If the selection moved to a different morpheme, and we know a corresponding
// LexEntry, switch to it.
if (m_ComboHandler.SelectedMorphHvo != 0)
{
int hvoSbEntry = m_caches.DataAccess.get_ObjectProp(
m_ComboHandler.SelectedMorphHvo, ktagSbMorphEntry);
if (hvoSbEntry != 0)
{
//SetSelectedEntry(m_caches.RealHvo(hvoSbEntry)); // seems to be buggy.
}
}
}
}