private bool OnReceiveProcess(AzureReceiveState receiveState) {
var retVal = false;
try {
ProcessMessageCallBack(receiveState);
}
catch (Exception ex) {
logger.Error("OnReceiveProcess: Error while calling The registerd callback: {0}", ex);
retVal = true;
}
finally {
try {
// With PeekLock mode, we should mark the failed message as abandoned.
if (receiveState.Message != null) {
if (data.Client.Mode == ReceiveMode.PeekLock) {
if (retVal) {
// Abandons a brokered message. This will cause Service Bus to unlock the message and make it available
// to be received again, either by the same consumer or by another completing consumer.
SafeAbandon(receiveState.Message);
}
else {
// Mark brokered message as completed at which point it's removed from the queue.
SafeComplete(receiveState.Message);
}
}
receiveState.Message.Dispose();
}
}
catch {
//Do not fail :)
}
}
return retVal;
}
public void OnMessageHandler(IBrokeredMessage msg)
{
//receive loop begin
bool failed = false;
if (msg != null)
{
// Make sure we are not told to stop receiving while we were waiting for a new message.
if (!data.CancelToken.IsCancellationRequested)
{
// Process the received message.
logger.Debug("ProcessMessagesForSubscription Start received new message: {0}", data.EndPointData.SubscriptionNameDebug);
var receiveState = new AzureReceiveState(data, methodInfo, serializer, msg);
failed = OnReceiveProcess(receiveState);
logger.Debug("ProcessMessagesForSubscription End received new message: {0}", data.EndPointData.SubscriptionNameDebug);
}
}
if (data.CancelToken.IsCancellationRequested)
{
//Cancel the message pump.
data.SetMessageLoopCompleted();
try {
if (!data.Client.IsClosed)
{
data.Client.Close();
}
}
catch {
}
}
else if (failed)
{
if (data.EndPointData.AttributeData.PauseTimeIfErrorWasThrown > 0)
{
//For now, do not support pause time
Thread.Sleep(1000); //This has zero impact if the thread count is > 1
//lock (lockObject) {
// if (DateTime.Now.AddMilliseconds(-data.EndPointData.AttributeData.PauseTimeIfErrorWasThrown) >= lastResetTime) {
// retryPolicy.ExecuteAction(() => {
// if (!data.Client.IsClosed) {
// data.Client.Close();
// }
// });
// Thread.Sleep(data.EndPointData.AttributeData.PauseTimeIfErrorWasThrown);
// lastResetTime = DateTime.Now;
// retryPolicy.ExecuteAction(() => {
// Configure(endpoint);
// data.Client.OnMessage(OnMessageHandler, options);
// });
// }
//}
}
else
{
Thread.Sleep(1000); //This has zero impact if the thread count is > 1
}
}
}
private bool OnReceiveProcess(AzureReceiveState receiveState)
{
var retVal = false;
try {
ProcessMessageCallBack(receiveState);
}
catch (Exception ex) {
logger.Error("OnReceiveProcess: Error while calling The registered callback: {0}", ex);
retVal = true;
}
finally {
try {
// With PeekLock mode, we should mark the failed message as abandoned.
if (receiveState.Message != null)
{
if (data.Client.Mode == ReceiveMode.PeekLock)
{
if (retVal)
{
// Abandons a brokered message. This will cause Service Bus to unlock the message and make it available
// to be received again, either by the same consumer or by another completing consumer.
SafeAbandon(receiveState.Message);
}
else
{
// Mark brokered message as completed at which point it's removed from the queue.
SafeComplete(receiveState.Message);
}
}
receiveState.Message.Dispose();
}
}
catch {
//Do not fail :)
}
}
return(retVal);
}
void ProcessMessageCallBack(AzureReceiveState state) {
Guard.ArgumentNotNull(state, "state");
logger.Debug("ProcessMessage Start received new message={0} Thread={1} MessageId={2}",
state.Data.EndPointData.SubscriptionName, Thread.CurrentThread.ManagedThreadId, state.Message.MessageId);
string objectTypeName = string.Empty;
try {
IDictionary<string, object> values = new Dictionary<string, object>();
if (state.Message.Properties != null) {
foreach (var item in state.Message.Properties) {
if (item.Key != AzureSenderReceiverBase.TYPE_HEADER_NAME) {
values.Add(item);
}
}
}
using (var serial = state.CreateSerializer()) {
var stream = state.Message.GetBody<Stream>();
stream.Position = 0;
object msg = serial.Deserialize(stream, state.Data.EndPointData.MessageType);
var receivedMessage = state.Data.EndPointData.GetReceivedMessage(new object[] { state.Message, msg, values });
objectTypeName = receivedMessage.GetType().FullName;
logger.Debug("ProcessMessage invoke callback message start Type={0} message={1} Thread={2} MessageId={3}", objectTypeName, state.Data.EndPointData.SubscriptionNameDebug, Thread.CurrentThread.ManagedThreadId, state.Message.MessageId);
var handler = config.Container.Resolve(state.Data.EndPointData.DeclaredType);
logger.Debug("ProcessMessage reflection callback message start MethodInfo Type={0} Declared={1} handler={2} MethodInfo={3} Thread={4} MessageId={5}", objectTypeName, state.Data.EndPointData.DeclaredType, handler.GetType().FullName, state.MethodInfo.Name, Thread.CurrentThread.ManagedThreadId, state.Message.MessageId);
state.MethodInfo.Invoke(handler, new object[] { receivedMessage });
logger.Debug("ProcessMessage invoke callback message end Type={0} message={1} Thread={2} MessageId={3}", objectTypeName, state.Data.EndPointData.SubscriptionNameDebug, Thread.CurrentThread.ManagedThreadId, state.Message.MessageId);
}
}
catch (Exception ex) {
logger.Error("ProcessMessage invoke callback message failed Type={0} message={1} Thread={2} MessageId={3} Exception={4}", objectTypeName, state.Data.EndPointData.SubscriptionNameDebug, Thread.CurrentThread.ManagedThreadId, state.Message.MessageId, ex.ToString());
if (state.Message.DeliveryCount >= state.Data.EndPointData.AttributeData.MaxRetries) {
if (state.Data.EndPointData.AttributeData.DeadLetterAfterMaxRetries) {
SafeDeadLetter(state.Message, ex.Message);
}
else {
SafeComplete(state.Message);
}
}
throw;
}
logger.Debug("ProcessMessage End received new message={0} Thread={1} MessageId={2}",
state.Data.EndPointData.SubscriptionNameDebug, Thread.CurrentThread.ManagedThreadId, state.Message.MessageId);
}
private void ProcessMessagesForSubscriptionLegacy() {
try {
logger.Info("ProcessMessagesForSubscription Message Start {0} Declared {1} MessageTytpe {2}, IsReusable {3}", data.EndPointData.SubscriptionName,
data.EndPointData.DeclaredType.ToString(), data.EndPointData.MessageType.ToString(), data.EndPointData.IsReusable);
var gt = typeof(IReceivedMessage<>).MakeGenericType(data.EndPointData.MessageType);
var methodInfo = data.EndPointData.DeclaredType.GetMethod("Handle", new Type[] { gt });
var waitTimeout = TimeSpan.FromSeconds(30);
// Declare an action acting as a callback whenever a message arrives on a queue.
AsyncCallback completeReceive = null;
// Declare an action acting as a callback whenever a non-transient exception occurs while receiving or processing messages.
Action<Exception> recoverReceive = null;
// Declare an action implementing the main processing logic for received messages.
Action<AzureReceiveState> processMessage = ((receiveState) => {
// Put your custom processing logic here. DO NOT swallow any exceptions.
ProcessMessageCallBack(receiveState);
});
bool messageReceived = false;
bool lastAttemptWasError = false;
// Declare an action responsible for the core operations in the message receive loop.
Action receiveMessage = (() => {
// Use a retry policy to execute the Receive action in an asynchronous and reliable fashion.
retryPolicy.ExecuteAction
(
(cb) => {
if (lastAttemptWasError) {
if (data.EndPointData.AttributeData.PauseTimeIfErrorWasThrown > 0) {
Thread.Sleep(data.EndPointData.AttributeData.PauseTimeIfErrorWasThrown);
}
else {
Thread.Sleep(1000);
}
}
// Start receiving a new message asynchronously.
data.Client.BeginReceive(waitTimeout, cb, null);
},
(ar) => {
messageReceived = false;
// Make sure we are not told to stop receiving while we were waiting for a new message.
if (!data.CancelToken.IsCancellationRequested) {
IBrokeredMessage msg = null;
bool isError = false;
try {
// Complete the asynchronous operation. This may throw an exception that will be handled internally by retry policy.
msg = data.Client.EndReceive(ar);
// Check if we actually received any messages.
if (msg != null) {
// Make sure we are not told to stop receiving while we were waiting for a new message.
if (!data.CancelToken.IsCancellationRequested) {
// Process the received message.
messageReceived = true;
logger.Debug("ProcessMessagesForSubscription Start received new message: {0}", data.EndPointData.SubscriptionNameDebug);
var receiveState = new AzureReceiveState(data, methodInfo, serializer, msg);
processMessage(receiveState);
logger.Debug("ProcessMessagesForSubscription End received new message: {0}", data.EndPointData.SubscriptionNameDebug);
}
}
}
catch (Exception) {
isError = true;
throw;
}
finally {
// With PeekLock mode, we should mark the failed message as abandoned.
if (msg != null) {
if (data.Client.Mode == ReceiveMode.PeekLock) {
if (isError) {
// Abandons a brokered message. This will cause Service Bus to unlock the message and make it available
// to be received again, either by the same consumer or by another completing consumer.
SafeAbandon(msg);
}
else {
// Mark brokered message as completed at which point it's removed from the queue.
SafeComplete(msg);
}
}
msg.Dispose();
}
}
}
// Invoke a custom callback method to indicate that we have completed an iteration in the message receive loop.
completeReceive(ar);
},
() => {
//do nothing, we completed.
},
(ex) => {
// Invoke a custom action to indicate that we have encountered an exception and
// need further decision as to whether to continue receiving messages.
recoverReceive(ex);
});
});
// Initialize a custom action acting as a callback whenever a message arrives on a queue.
completeReceive = ((ar) => {
lastAttemptWasError = false;
if (!data.CancelToken.IsCancellationRequested) {
// Continue receiving and processing new messages until we are told to stop.
receiveMessage();
}
else {
data.SetMessageLoopCompleted();
}
if (messageReceived) {
logger.Debug("ProcessMessagesForSubscription Message Complete={0} Declared={1} MessageTytpe={2} IsReusable={3}", data.EndPointData.SubscriptionName,
data.EndPointData.DeclaredType.ToString(), data.EndPointData.MessageType.ToString(), data.EndPointData.IsReusable);
}
});
// Initialize a custom action acting as a callback whenever a non-transient exception occurs while receiving or processing messages.
recoverReceive = ((ex) => {
// Just log an exception. Do not allow an unhandled exception to terminate the message receive loop abnormally.
lastAttemptWasError = true;
if (!data.CancelToken.IsCancellationRequested && typeof(ThreadAbortException) != ex.GetType()) {
//The subscription may have been deleted. If it was, then we want to recreate it.
var subException = ex as MessagingEntityNotFoundException;
if (subException != null && subException.Detail != null && subException.Detail.Message.IndexOf("40400") > -1) {
logger.Info("Subscription was deleted. Attempting to Recreate.");
Configure(endpoint);
logger.Info("Subscription was deleted. Recreated.");
}
else {
logger.Error(string.Format("ProcessMessagesForSubscription Message Error={0} Declared={1} MessageTytpe={2} IsReusable={3} Error={4}",
data.EndPointData.SubscriptionName,
data.EndPointData.DeclaredType.ToString(),
data.EndPointData.MessageType.ToString(),
data.EndPointData.IsReusable,
ex.ToString()));
}
// Continue receiving and processing new messages until we are told to stop regardless of any exceptions.
receiveMessage();
}
else {
data.SetMessageLoopCompleted();
}
if (messageReceived) {
logger.Debug("ProcessMessagesForSubscription Message Complete={0} Declared={1} MessageTytpe={2} IsReusable={3}", data.EndPointData.SubscriptionName,
data.EndPointData.DeclaredType.ToString(), data.EndPointData.MessageType.ToString(), data.EndPointData.IsReusable);
}
});
// Start receiving messages asynchronously.
receiveMessage();
}
catch (ThreadAbortException) {
//do nothing, let it exit
}
catch (Exception ex) {
failCounter++;
logger.Error("ProcessMessagesForSubscription: Error during receive during loop. See details and fix: {0}", ex);
if (failCounter < 100) {
//try again
ProcessMessagesForSubscription();
}
}
}
public void OnMessageHandler(IBrokeredMessage msg) {
//receive loop begin
bool failed = false;
if (msg != null) {
// Make sure we are not told to stop receiving while we were waiting for a new message.
if (!data.CancelToken.IsCancellationRequested) {
// Process the received message.
logger.Debug("ProcessMessagesForSubscription Start received new message: {0}", data.EndPointData.SubscriptionNameDebug);
var receiveState = new AzureReceiveState(data, methodInfo, serializer, msg);
failed = OnReceiveProcess(receiveState);
logger.Debug("ProcessMessagesForSubscription End received new message: {0}", data.EndPointData.SubscriptionNameDebug);
}
}
if (data.CancelToken.IsCancellationRequested) {
//Cancel the message pump.
data.SetMessageLoopCompleted();
try {
data.Client.Close();
}
catch {
}
}
else if (failed) {
//close the pump.
data.Client.Close();
if (data.EndPointData.AttributeData.PauseTimeIfErrorWasThrown > 0) {
Thread.Sleep(data.EndPointData.AttributeData.PauseTimeIfErrorWasThrown);
}
else {
Thread.Sleep(1000);
}
data.Client.OnMessage(OnMessageHandler, options);
}
}
void ProcessMessageCallBack(AzureReceiveState state)
{
Guard.ArgumentNotNull(state, "state");
logger.Debug("ProcessMessage Start received new message={0} Thread={1} MessageId={2}",
state.Data.EndPointData.SubscriptionName, Thread.CurrentThread.ManagedThreadId, state.Message.MessageId);
string objectTypeName = string.Empty;
try {
IDictionary <string, object> values = new Dictionary <string, object>();
if (state.Message.Properties != null)
{
foreach (var item in state.Message.Properties)
{
if (item.Key != AzureSenderReceiverBase.TYPE_HEADER_NAME)
{
values.Add(item);
}
}
}
using (var serial = state.CreateSerializer()) {
var stream = state.Message.GetBody <Stream>();
stream.Position = 0;
object msg = serial.Deserialize(stream, state.Data.EndPointData.MessageType);
var receivedMessage = state.Data.EndPointData.GetReceivedMessage(new object[] { state.Message, msg, values });
objectTypeName = receivedMessage.GetType().FullName;
logger.Debug("ProcessMessage invoke callback message start Type={0} message={1} Thread={2} MessageId={3}", objectTypeName, state.Data.EndPointData.SubscriptionNameDebug, Thread.CurrentThread.ManagedThreadId, state.Message.MessageId);
var handler = config.Container.Resolve(state.Data.EndPointData.DeclaredType);
logger.Debug("ProcessMessage reflection callback message start MethodInfo Type={0} Declared={1} handler={2} MethodInfo={3} Thread={4} MessageId={5}", objectTypeName, state.Data.EndPointData.DeclaredType, handler.GetType().FullName, state.MethodInfo.Name, Thread.CurrentThread.ManagedThreadId, state.Message.MessageId);
state.MethodInfo.Invoke(handler, new object[] { receivedMessage });
logger.Debug("ProcessMessage invoke callback message end Type={0} message={1} Thread={2} MessageId={3}", objectTypeName, state.Data.EndPointData.SubscriptionNameDebug, Thread.CurrentThread.ManagedThreadId, state.Message.MessageId);
}
}
catch (Exception ex) {
logger.Error("ProcessMessage invoke callback message failed Type={0} message={1} Thread={2} MessageId={3} Exception={4}", objectTypeName, state.Data.EndPointData.SubscriptionNameDebug, Thread.CurrentThread.ManagedThreadId, state.Message.MessageId, ex.ToString());
if (state.Message.DeliveryCount >= state.Data.EndPointData.AttributeData.MaxRetries)
{
if (state.Data.EndPointData.AttributeData.DeadLetterAfterMaxRetries)
{
SafeDeadLetter(state.Message, ex.Message);
}
else
{
SafeComplete(state.Message);
}
}
throw;
}
logger.Debug("ProcessMessage End received new message={0} Thread={1} MessageId={2}",
state.Data.EndPointData.SubscriptionNameDebug, Thread.CurrentThread.ManagedThreadId, state.Message.MessageId);
}
private void ProcessMessagesForSubscriptionLegacy()
{
try {
logger.Info("ProcessMessagesForSubscription Message Start {0} Declared {1} MessageTytpe {2}, IsReusable {3}", data.EndPointData.SubscriptionName,
data.EndPointData.DeclaredType.ToString(), data.EndPointData.MessageType.ToString(), data.EndPointData.IsReusable);
var gt = typeof(IReceivedMessage <>).MakeGenericType(data.EndPointData.MessageType);
var methodInfo = data.EndPointData.DeclaredType.GetMethod("Handle", new Type[] { gt });
var waitTimeout = TimeSpan.FromSeconds(30);
// Declare an action acting as a callback whenever a message arrives on a queue.
AsyncCallback completeReceive = null;
// Declare an action acting as a callback whenever a non-transient exception occurs while receiving or processing messages.
Action <Exception> recoverReceive = null;
// Declare an action implementing the main processing logic for received messages.
Action <AzureReceiveState> processMessage = ((receiveState) => {
// Put your custom processing logic here. DO NOT swallow any exceptions.
ProcessMessageCallBack(receiveState);
});
bool messageReceived = false;
bool lastAttemptWasError = false;
// Declare an action responsible for the core operations in the message receive loop.
Action receiveMessage = (() => {
// Use a retry policy to execute the Receive action in an asynchronous and reliable fashion.
retryPolicy.ExecuteAction
(
(cb) => {
if (lastAttemptWasError)
{
if (data.EndPointData.AttributeData.PauseTimeIfErrorWasThrown > 0)
{
Thread.Sleep(data.EndPointData.AttributeData.PauseTimeIfErrorWasThrown);
}
else
{
Thread.Sleep(1000);
}
}
// Start receiving a new message asynchronously.
data.Client.BeginReceive(waitTimeout, cb, null);
},
(ar) => {
messageReceived = false;
// Make sure we are not told to stop receiving while we were waiting for a new message.
if (!data.CancelToken.IsCancellationRequested)
{
IBrokeredMessage msg = null;
bool isError = false;
try {
// Complete the asynchronous operation. This may throw an exception that will be handled internally by retry policy.
msg = data.Client.EndReceive(ar);
// Check if we actually received any messages.
if (msg != null)
{
// Make sure we are not told to stop receiving while we were waiting for a new message.
if (!data.CancelToken.IsCancellationRequested)
{
// Process the received message.
messageReceived = true;
logger.Debug("ProcessMessagesForSubscription Start received new message: {0}", data.EndPointData.SubscriptionNameDebug);
var receiveState = new AzureReceiveState(data, methodInfo, serializer, msg);
processMessage(receiveState);
logger.Debug("ProcessMessagesForSubscription End received new message: {0}", data.EndPointData.SubscriptionNameDebug);
}
}
}
catch (Exception) {
isError = true;
throw;
}
finally {
// With PeekLock mode, we should mark the failed message as abandoned.
if (msg != null)
{
if (data.Client.Mode == ReceiveMode.PeekLock)
{
if (isError)
{
// Abandons a brokered message. This will cause Service Bus to unlock the message and make it available
// to be received again, either by the same consumer or by another completing consumer.
SafeAbandon(msg);
}
else
{
// Mark brokered message as completed at which point it's removed from the queue.
SafeComplete(msg);
}
}
msg.Dispose();
}
}
}
// Invoke a custom callback method to indicate that we have completed an iteration in the message receive loop.
completeReceive(ar);
},
() => {
//do nothing, we completed.
},
(ex) => {
// Invoke a custom action to indicate that we have encountered an exception and
// need further decision as to whether to continue receiving messages.
recoverReceive(ex);
});
});
// Initialize a custom action acting as a callback whenever a message arrives on a queue.
completeReceive = ((ar) => {
lastAttemptWasError = false;
if (!data.CancelToken.IsCancellationRequested)
{
// Continue receiving and processing new messages until we are told to stop.
receiveMessage();
}
else
{
data.SetMessageLoopCompleted();
}
if (messageReceived)
{
logger.Debug("ProcessMessagesForSubscription Message Complete={0} Declared={1} MessageTytpe={2} IsReusable={3}", data.EndPointData.SubscriptionName,
data.EndPointData.DeclaredType.ToString(), data.EndPointData.MessageType.ToString(), data.EndPointData.IsReusable);
}
});
// Initialize a custom action acting as a callback whenever a non-transient exception occurs while receiving or processing messages.
recoverReceive = ((ex) => {
// Just log an exception. Do not allow an unhandled exception to terminate the message receive loop abnormally.
lastAttemptWasError = true;
if (!data.CancelToken.IsCancellationRequested && typeof(ThreadAbortException) != ex.GetType())
{
//The subscription may have been deleted. If it was, then we want to recreate it.
var subException = ex as MessagingEntityNotFoundException;
if (subException != null && subException.Detail != null && subException.Detail.Message.IndexOf("40400") > -1)
{
logger.Info("Subscription was deleted. Attempting to Recreate.");
Configure(endpoint);
logger.Info("Subscription was deleted. Recreated.");
}
else
{
logger.Error(string.Format("ProcessMessagesForSubscription Message Error={0} Declared={1} MessageTytpe={2} IsReusable={3} Error={4}",
data.EndPointData.SubscriptionName,
data.EndPointData.DeclaredType.ToString(),
data.EndPointData.MessageType.ToString(),
data.EndPointData.IsReusable,
ex.ToString()));
}
// Continue receiving and processing new messages until we are told to stop regardless of any exceptions.
receiveMessage();
}
else
{
data.SetMessageLoopCompleted();
}
if (messageReceived)
{
logger.Debug("ProcessMessagesForSubscription Message Complete={0} Declared={1} MessageTytpe={2} IsReusable={3}", data.EndPointData.SubscriptionName,
data.EndPointData.DeclaredType.ToString(), data.EndPointData.MessageType.ToString(), data.EndPointData.IsReusable);
}
});
// Start receiving messages asynchronously.
receiveMessage();
}
catch (ThreadAbortException) {
//do nothing, let it exit
}
catch (Exception ex) {
failCounter++;
logger.Error("ProcessMessagesForSubscription: Error during receive during loop. See details and fix: {0}", ex);
if (failCounter < 100)
{
//try again
ProcessMessagesForSubscription();
}
}
}
public void OnMessageHandler(IBrokeredMessage msg) {
//receive loop begin
bool failed = false;
if (msg != null) {
// Make sure we are not told to stop receiving while we were waiting for a new message.
if (!data.CancelToken.IsCancellationRequested) {
// Process the received message.
logger.Debug("ProcessMessagesForSubscription Start received new message: {0}", data.EndPointData.SubscriptionNameDebug);
var receiveState = new AzureReceiveState(data, methodInfo, serializer, msg);
failed = OnReceiveProcess(receiveState);
logger.Debug("ProcessMessagesForSubscription End received new message: {0}", data.EndPointData.SubscriptionNameDebug);
}
}
if (data.CancelToken.IsCancellationRequested) {
//Cancel the message pump.
data.SetMessageLoopCompleted();
try {
if (!data.Client.IsClosed) {
data.Client.Close();
}
}
catch {
}
}
else if (failed) {
if (data.EndPointData.AttributeData.PauseTimeIfErrorWasThrown > 0) {
//For now, do not support pause time
Thread.Sleep(1000); //This has zero impact if the thread count is > 1
//lock (lockObject) {
// if (DateTime.Now.AddMilliseconds(-data.EndPointData.AttributeData.PauseTimeIfErrorWasThrown) >= lastResetTime) {
// retryPolicy.ExecuteAction(() => {
// if (!data.Client.IsClosed) {
// data.Client.Close();
// }
// });
// Thread.Sleep(data.EndPointData.AttributeData.PauseTimeIfErrorWasThrown);
// lastResetTime = DateTime.Now;
// retryPolicy.ExecuteAction(() => {
// Configure(endpoint);
// data.Client.OnMessage(OnMessageHandler, options);
// });
// }
//}
}
else {
Thread.Sleep(1000); //This has zero impact if the thread count is > 1
}
}
}
