private byte[] GetBandsContent()
{
var memStream = new MemoryStream();
using (BinaryFile binFile = new BinaryFile(memStream, BinaryFile.ByteOrder.LittleEndian, Encoding.ASCII))
{
binFile.Write((UInt32)(int)Bands.Count * 13 + 22);
for (int i = 0; i < 24; i++)
{
if (i < Bands.Count)
{
binFile.Write((float)(Bands[i].Enabled ? 1 : 0));
binFile.Write((float)(1)); // unknown 1
binFile.Write((float)FabfilterProQ2.FreqConvert(Bands[i].Frequency));
binFile.Write((float)Bands[i].Gain);
binFile.Write((float)Bands[i].DynamicRange);
binFile.Write((float)(1)); // unknown 3
binFile.Write((float)Bands[i].DynamicThreshold);
binFile.Write((float)FabfilterProQ2.QConvert(Bands[i].Q));
binFile.Write((float)Bands[i].Shape);
binFile.Write((float)Bands[i].Slope);
binFile.Write((float)Bands[i].StereoPlacement);
binFile.Write((float)(1)); // unknown 5
binFile.Write((float)(0)); // unknown 6
}
else
{
binFile.Write((float)0);
binFile.Write((float)(1)); // unknown 1
binFile.Write((float)FabfilterProQ2.FreqConvert(1000));
binFile.Write((float)0); // gain
binFile.Write((float)0); // dynamic range
binFile.Write((float)(1)); // unknown 3
binFile.Write((float)(1)); // dynamic threshold
binFile.Write((float)FabfilterProQ2.QConvert(1));
binFile.Write((float)ProQ2Shape.Bell);
binFile.Write((float)ProQSlope.Slope24dB_oct);
binFile.Write((float)ProQ2StereoPlacement.Stereo);
binFile.Write((float)(1)); // unknown 5
binFile.Write((float)(0)); // unknown 6
}
}
// write the remaining floats
foreach (var fUnknown in UnknownParameters)
{
binFile.Write((float)fUnknown); // unknown
}
}
return(memStream.ToArray());
}
private byte[] GetBandsContent()
{
var memStream = new MemoryStream();
using (BinaryFile binFile = new BinaryFile(memStream, BinaryFile.ByteOrder.LittleEndian, Encoding.ASCII))
{
binFile.Write((UInt32)(int)Bands.Count * 7 + 22);
for (int i = 0; i < 24; i++)
{
if (i < Bands.Count)
{
binFile.Write((float)(Bands[i].Enabled ? 1 : 2));
binFile.Write((float)FabfilterProQ2.FreqConvert(Bands[i].Frequency));
binFile.Write((float)Bands[i].Gain);
binFile.Write((float)FabfilterProQ2.QConvert(Bands[i].Q));
binFile.Write((float)Bands[i].Shape);
binFile.Write((float)Bands[i].Slope);
binFile.Write((float)Bands[i].StereoPlacement);
}
else
{
binFile.Write((float)2);
binFile.Write((float)FabfilterProQ2.FreqConvert(1000));
binFile.Write((float)0);
binFile.Write((float)FabfilterProQ2.QConvert(1));
binFile.Write((float)ProQ2Shape.Bell);
binFile.Write((float)ProQSlope.Slope24dB_oct);
binFile.Write((float)ProQ2StereoPlacement.Stereo);
}
}
// write the remaining floats
binFile.Write((float)ProcessingMode); // Zero Latency: 0.0, Natural Phase: 1.0, Linear Phase: 2.0
binFile.Write((float)ProcessingResolution); // 0 - 4, Medium
binFile.Write((float)ChannelMode); // 0 = Left/Right, 1 = Mid/Side
binFile.Write((float)GainScale); // 100%
binFile.Write((float)OutputLevel); // 0.0 dB, -1 to 1 (- Infinity to +36 dB , 0 = 0 dB)
binFile.Write((float)OutputPan); // Left 0 dB, Right: 0 dB, -1 to 1 (0 = middle)
binFile.Write((float)ByPass); // Not Bypassed
binFile.Write((float)OutputInvertPhase); // Normal
binFile.Write((float)AutoGain); // Off
binFile.Write((float)AnalyzerShowPreProcessing); // Disabled - 0: Off, 1: On
binFile.Write((float)AnalyzerShowPostProcessing); // Disabled - 0: Off, 1: On
binFile.Write((float)AnalyzerShowSidechain); // Disabled - 0: Off, 1: On
binFile.Write((float)AnalyzerRange); // Analyzer Range in dB. 0.0: 60dB, 1.0: 90dB, 2.0: 120dB
binFile.Write((float)AnalyzerResolution); // Analyzer Resolution. 0.0: Low, 1.0: Medium, 2.0: High, 3.00: Maximum
binFile.Write((float)AnalyzerSpeed); // Analyzer Speed. 0.0: Very Slow, 1.0: Slow, 2.0: Medium, 3.0 Fast, 4.0: Very Fast
binFile.Write((float)AnalyzerTilt); // Analyzer Tilt in dB/oct. 0.0: 0.0, 1.0: 1.5, 2.0: 3.0, 3.0: 4.5, 4.0: 6.0
binFile.Write((float)AnalyzerFreeze); // 0: Off, 1: On
binFile.Write((float)SpectrumGrab); // Enabled
binFile.Write((float)DisplayRange); // 12dB
binFile.Write((float)ReceiveMidi); // Enabled
binFile.Write((float)SoloBand); // -1
binFile.Write((float)SoloGain); // 0.00
// Don't write the ex fields
// binFile.Write((float)ExAutoGain); // (Other)
}
return(memStream.ToArray());
}
