private void mnuXVTR_Click(object sender, System.EventArgs e)
{
if(XVTRForm == null || XVTRForm.IsDisposed)
XVTRForm = new XVTRForm(this);
XVTRForm.Show();
XVTRForm.Focus();
}
private void InitConsole()
{
#if(DEBUG)
mnuUCB.Visible = true;
button1.Visible = true;
#endif
Thread.Sleep(100);
UpdateBandStackRegisters();
Audio.console = this;
FWCMidi.console = this;
Display.console = this;
chkDSPNB2.Enabled = true;
vfoa_hover_digit = -1;
vfob_hover_digit = -1;
rx1_ant_by_band = new FWCAnt[(int)Band.LAST];
for(int i=0; i<(int)Band.LAST; i++) rx1_ant_by_band[i] = FWCAnt.ANT1;
rx2_ant_by_band = new FWCAnt[(int)Band.LAST];
for(int i=0; i<(int)Band.LAST; i++) rx2_ant_by_band[i] = FWCAnt.RX2IN;
tx_ant_by_band = new FWCAnt[(int)Band.LAST];
for(int i=0; i<(int)Band.LAST; i++) tx_ant_by_band[i] = FWCAnt.ANT1;
rx1_loop_by_band = new bool[(int)Band.LAST];
rx1_preamp_by_band = new PreampMode[(int)Band.LAST];
for(int i=0; i<(int)Band.LAST; i++) rx1_preamp_by_band[i] = PreampMode.HIGH;
rx2_preamp_by_band = new PreampMode[(int)Band.LAST];
for(int i=0; i<(int)Band.LAST; i++) rx2_preamp_by_band[i] = PreampMode.HIGH;
power_by_band = new int[(int)Band.LAST];
for(int i=0; i<(int)Band.LAST; i++) power_by_band[i] = 50;
rx1_agct_by_band = new int[(int)Band.LAST];
for(int i=0; i<(int)Band.LAST; i++) rx1_agct_by_band[i] = 90;
rx2_agct_by_band = new int[(int)Band.LAST];
for(int i=0; i<(int)Band.LAST; i++) rx2_agct_by_band[i] = 90;
tx1_by_band = new bool[(int)Band.LAST];
tx2_by_band = new bool[(int)Band.LAST];
tx3_by_band = new bool[(int)Band.LAST];
for(int i=0; i<(int)Band.LAST; i++)
tx1_by_band[i] = tx2_by_band[i] = tx3_by_band[i] = true;
vhf_text = new ButtonTS[15];
vhf_text[0] = btnBandVHF0;
vhf_text[1] = btnBandVHF1;
vhf_text[2] = btnBandVHF2;
vhf_text[3] = btnBandVHF3;
vhf_text[4] = btnBandVHF4;
vhf_text[5] = btnBandVHF5;
vhf_text[6] = btnBandVHF6;
vhf_text[7] = btnBandVHF7;
vhf_text[8] = btnBandVHF8;
vhf_text[9] = btnBandVHF9;
vhf_text[10] = btnBandVHF10;
vhf_text[11] = btnBandVHF11;
vhf_text[12] = btnBandVHF12;
vhf_text[13] = btnBandVHF13;
power_table = new float[(int)Band.LAST][];
for(int i=0; i<(int)Band.LAST; i++)
power_table[i] = new float[13];
rx1_image_gain_table = new float[(int)Band.LAST];
rx1_image_phase_table = new float[(int)Band.LAST];
rx2_image_gain_table = new float[(int)Band.LAST];
rx2_image_phase_table = new float[(int)Band.LAST];
tx_image_gain_table = new float[(int)Band.LAST];
tx_image_phase_table = new float[(int)Band.LAST];
tx_carrier_table = new int[(int)Band.LAST][];
for(int i=0; i<(int)Band.LAST; i++)
{
tx_carrier_table[i] = new int[4];
for(int j=0; j<4; j++)
tx_carrier_table[i][j] = 128;
}
pa_bias_table = new int[4][]; // 4 groups of 8 pot settings
for(int i=0; i<4; i++)
{
pa_bias_table[i] = new int[8];
for(int j=0; j<8; j++)
pa_bias_table[i][j] = 0;
}
rx1_level_table = new float[(int)Band.LAST][]; // 3 settings per band (display_offset, preamp, multimeter offset)
for(int i=0; i<(int)Band.LAST; i++)
{
rx1_level_table[i] = new float[3];
rx1_level_table[i][0] = -59.2f; // setup defaults;
rx1_level_table[i][1] = -13.5f;
rx1_level_table[i][2] = -32.0f;
}
rx2_level_table = new float[(int)Band.LAST][]; // 3 settings per band (display_offset, preamp, multimeter offset)
for(int i=0; i<(int)Band.LAST; i++)
{
rx2_level_table[i] = new float[3];
rx2_level_table[i][0] = -59.2f; // setup defaults;
rx2_level_table[i][1] = -13.5f;
rx2_level_table[i][2] = -32.0f;
}
pa_bridge_table = new float[(int)Band.LAST][];
for(int i=0; i<(int)Band.LAST; i++)
{
pa_bridge_table[i] = new float[6]; // 1, 2, 5, 10, 20, 90
for(int j=0; j<6; j++)
pa_bridge_table[i][j] = 0.0f;
}
swr_table = new float[(int)Band.LAST];
for(int i=0; i<(int)Band.LAST; i++)
swr_table[i] = 1.0f;
atu_tuning = false;
tune_power = 10;
calibrating = false;
run_setup_wizard = true;
// get culture specific decimal separator
separator = CultureInfo.CurrentCulture.NumberFormat.NumberDecimalSeparator;
last_band = ""; // initialize bandstack
wheel_tune_list = new double[13]; // initialize wheel tuning list array
wheel_tune_list[0] = 0.000001;
wheel_tune_list[1] = 0.000010;
wheel_tune_list[2] = 0.000050;
wheel_tune_list[3] = 0.000100;
wheel_tune_list[4] = 0.000250;
wheel_tune_list[5] = 0.000500;
wheel_tune_list[6] = 0.001000;
wheel_tune_list[7] = 0.005000;
wheel_tune_list[8] = 0.009000;
wheel_tune_list[9] = 0.010000;
wheel_tune_list[10] = 0.100000;
wheel_tune_list[11] = 1.000000;
wheel_tune_list[12] = 10.000000;
wheel_tune_index = 6;
meter_text_history = new float[multimeter_text_peak_samples];
current_meter_data = -200.0f;
rx1_preamp_offset = new float[4];
rx1_preamp_offset[(int)PreampMode.OFF] = 10.0f;
rx1_preamp_offset[(int)PreampMode.LOW] = 0.0f;
rx1_preamp_offset[(int)PreampMode.MED] = -16.0f;
rx1_preamp_offset[(int)PreampMode.HIGH] = -26.0f;
rx2_preamp_offset = new float[4];
rx2_preamp_offset[(int)PreampMode.OFF] = 0.0f;
rx2_preamp_offset[(int)PreampMode.HIGH] = 14.0f;
this.ActiveControl = chkPower; // Power has focus initially
Display.Target = picDisplay;
Display.Init(); // Initialize Display variables
InitDisplayModes(); // Initialize Display Modes
InitAGCModes(); // Initialize AGC Modes
InitMultiMeterModes(); // Initialize MultiMeter Modes
ProcessSampleThreadController[] pstc = new ProcessSampleThreadController[3];
audio_process_thread = new Thread[3];
for (uint proc_thread=0;proc_thread<3;proc_thread++)
{
pstc[proc_thread] = new ProcessSampleThreadController(proc_thread);
audio_process_thread[proc_thread] = new Thread( new ThreadStart(pstc[proc_thread].ProcessSampleThread));
audio_process_thread[proc_thread].Name = "Audio Process Thread "+proc_thread.ToString();
audio_process_thread[proc_thread].Priority = ThreadPriority.Highest;
audio_process_thread[proc_thread].IsBackground = true;
audio_process_thread[proc_thread].Start();
/* DttSP.SetThreadCom(proc_thread);
audio_process_thread = new Thread( // create audio process thread
new ThreadStart(DttSP.ProcessSamplesThread));
audio_process_thread.Name = "Audio Process Thread ";
audio_process_thread.Priority = ThreadPriority.Highest;
audio_process_thread.IsBackground = true;
audio_process_thread.Start();
*/
}
hw = new HW(0x378); // create hardware object
siolisten = new SIOListenerII(this);
Keyer = new CWKeyer2(this); // create new Keyer
// Keyer.sp.BaudRate = 4800; //[patch_15]
EQForm = new EQForm(this);
InitFilterPresets(); // Initialize filter values
SetupForm = new Setup(this); // create Setup form
SetupForm.StartPosition = FormStartPosition.Manual;
switch(current_model)
{
case Model.SDR1000:
Hdw.Init(); // Power down hardware
Hdw.StandBy(); // initialize hardware device
break;
/*case Model.SDRX:
if(fwc_init)
{
byte mask;
FWC.GetRXPresentMask(out mask);
for(int i=0; i<8; i++)
{
if((mask>>i & 1) == 1)
{
fwc_index = i;
break;
}
}
}
break;*/
case Model.FLEX5000:
if(fwc_init)
fwcMixForm = new FWCMixForm(this);
break;
}
//SetupForm.GetTxProfiles();
UpdateTXProfile(SetupForm.TXProfile);
Common.RestoreForm(EQForm, "EQForm", false);
XVTRForm = new XVTRForm(this);
MemForm = new Memory(this); // create Memory form
MemForm.StartPosition = FormStartPosition.Manual;
WaveForm = new WaveControl(this); // create Wave form
WaveForm.StartPosition = FormStartPosition.Manual;
//rx1_filter = Filter.F2600;
//RX1AGCMode = AGCMode.MED; // Initialize front panel controls
comboPreamp.Text = "High";
chkRX1Preamp.Checked = true;
vfob_dsp_mode = DSPMode.LSB;
vfob_filter = Filter.F3;
comboDisplayMode.Text = "Panadapter";
comboRX2DisplayMode.Text = "Panadapter";
comboMeterRXMode.SelectedIndex = 0;
comboRX2MeterMode.SelectedIndex = 0;
comboTuneMode.SelectedIndex = 0;
quick_save_filter = Filter.F3;
quick_save_mode = DSPMode.LSB;
udPWR.Value = 50;
btnDisplayPanCenter_Click(this, EventArgs.Empty);
comboTXProfile.Text = SetupForm.TXProfile;
comboDigTXProfile.Text = SetupForm.TXProfile;
GetState(); // recall saved state
chkFullDuplex.Checked = false;
if(rx1_dsp_mode == DSPMode.FIRST || rx1_dsp_mode == DSPMode.LAST)
radModeLSB.Checked = true;
if(rx2_dsp_mode == DSPMode.FIRST || rx2_dsp_mode == DSPMode.LAST)
radRX2ModeLSB.Checked = true;
if(rx1_filter == Filter.FIRST || rx1_filter == Filter.LAST ||
(rx1_filter == Filter.NONE && rx1_dsp_mode != DSPMode.DRM && rx1_dsp_mode != DSPMode.SPEC))
radFilter3.Checked = true;
if(rx2_filter == Filter.FIRST || rx2_filter == Filter.LAST ||
(rx2_filter == Filter.NONE && rx2_dsp_mode != DSPMode.DRM && rx2_dsp_mode != DSPMode.SPEC))
radRX2Filter3.Checked = true;
txtVFOAFreq_LostFocus(this, EventArgs.Empty);
/* if(fwc_init && current_model == Model.FLEX5000 && !run_setup_wizard)
{
CheckFLEX5000CalData();
if(fwcAntForm != null && !fwcAntForm.IsDisposed)
{
fwcAntForm.SetBand(rx1_band);
fwcAntForm.CurrentAntMode = current_ant_mode;
fwcAntForm.RX1Ant = rx1_ant;
fwcAntForm.RX1Loop = rx1_loop;
fwcAntForm.RX2Ant = rx2_ant;
fwcAntForm.TXAnt = tx_ant;
}
CheckRX2CalData();
RX1Ant = rx1_ant;
if(FWCEEPROM.RX2OK) RX2Ant = rx2_ant;
}
else PAPresent = pa_present;
*/
PAPresent = pa_present;
if(comboAGC.SelectedIndex < 0)
RX1AGCMode = AGCMode.MED;
if(comboRX2AGC.SelectedIndex < 0)
comboRX2AGC.Text = "Med";
txtVFOBFreq_LostFocus(this, EventArgs.Empty);
txtVFOAFreq_LostFocus(this, EventArgs.Empty);
udPWR_ValueChanged(this, EventArgs.Empty);
udAF_ValueChanged(this, EventArgs.Empty);
udMIC_ValueChanged(this, EventArgs.Empty);
RX1PreampMode = rx1_preamp_mode;
RX2PreampMode = rx2_preamp_mode;
tbDisplayZoom_Scroll(this, EventArgs.Empty);
tbRX0Gain_Scroll(this, EventArgs.Empty);
tbRX1Gain_Scroll(this, EventArgs.Empty);
tbPanMainRX_Scroll(this, EventArgs.Empty);
tbPanSubRX_Scroll(this, EventArgs.Empty);
CalcDisplayFreq();
wheel_tune_index--; // Setup wheel tuning
ChangeWheelTuneLeft();
UpdateDisplayOffsets();
SetupForm.initCATandPTTprops(); // wjt added -- get console props setup for cat and ptt
if ( CmdLineArgs != null )
{
for ( int i = 0; i < CmdLineArgs.Length; i++ )
{
switch(CmdLineArgs[i])
{
case "--disable-swr-prot-at-my-risk":
DisableSWRProtection = true;
this.Text = this.Text + " *** SWR Protection Disabled! ***";
break;
case "--high-pwr-am":
Audio.high_pwr_am = true;
MessageBox.Show("high power am");
break;
case "--ignore-pp-ptt": // ignore parallel port ptt -- simple testing w/o hardware attached
Hdw.ignorePTT(true);
this.Text = this.Text + " *** PP PTT disabled ***";
break;
// the next 4 opts are for various experimental HPSDR xmit and receive options
case "--force-16bit-IQ":
Force16bitIQ = true;
this.Text = this.Text + " *** 16 bit IQ ***";
break;
case "--mercury-xmit-hack":
DttSP.SetMercuryXmit(true);
this.Text = this.Text + " *** MercXmit ***";
break;
case "--eer-xmit-hack":
DttSP.SetEerXmit(true);
this.Text = this.Text + " *** EerXmit ***";
break;
case "--no-send-to-Janus":
NoJanusSend = true;
this.Text = this.Text + "*** NoJanusSend ***";
break;
}
}
}
if(comboMeterTXMode.Items.Count > 0 && comboMeterTXMode.SelectedIndex < 0)
comboMeterTXMode.SelectedIndex = 0;
chkMOX.Enabled = false;
RadioDSP.SyncStatic();
for(int i=0; i<2; i++)
{
for(int j=0; j<2; j++)
{
RadioDSPRX dsp_rx = radio.GetDSPRX(i, j);
dsp_rx.Force = true;
dsp_rx.Update = true;
dsp_rx.Force = false;
}
}
for(int i=0; i<1; i++)
{
RadioDSPTX dsp_tx = radio.GetDSPTX(i);
dsp_tx.Force = true;
dsp_tx.Update = true;
dsp_tx.Force = false;
}
if(this.SetupForm.FlexProfilerInstalled)
mnuProfiles.Visible = true;
}