public void RenderEditorGUI(UnityEngine.Object undoRecordObject)
{
bool newBool;
const float toggleWidth = 65.0f;
// Shortcut name label
EditorGUILayout.BeginVertical("Box");
EditorGUILayoutEx.SectionHeader(Name);
// Enabled/disabled
var content = new GUIContent();
content.text = "Is enabled";
content.tooltip = "Allows you to enable/disable a shortcut key.";
newBool = EditorGUILayout.ToggleLeft(content, IsEnabled);
if (newBool != IsEnabled)
{
EditorUndoEx.Record(undoRecordObject);
IsEnabled = newBool;
}
// For each possible key, let the user specify its key code
for (int keyIndex = 0; keyIndex < _maxNumberOfKeys; ++keyIndex)
{
int selectedIndex = _availableKeyNames.IndexOf(_keys[keyIndex].ToString());
int newIndex = EditorGUILayout.Popup("Key" + keyIndex.ToString(), selectedIndex, _availableKeyNames.ToArray());
if (newIndex != selectedIndex)
{
EditorUndoEx.Record(undoRecordObject);
_keys[keyIndex] = _availableKeys[newIndex];
}
}
// Modifiers
EditorGUILayout.BeginHorizontal();
EditorGUILayout.BeginVertical("Box");
newBool = EditorGUILayout.ToggleLeft("LCtrl", _lCtrl, GUILayout.Width(toggleWidth));
if (newBool != _lCtrl)
{
EditorUndoEx.Record(undoRecordObject);
_lCtrl = newBool;
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical("Box");
newBool = EditorGUILayout.ToggleLeft("LCmd", _lCmd, GUILayout.Width(toggleWidth));
if (newBool != _lCmd)
{
EditorUndoEx.Record(undoRecordObject);
_lCmd = newBool;
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical("Box");
newBool = EditorGUILayout.ToggleLeft("LAlt", _lAlt, GUILayout.Width(toggleWidth));
if (newBool != _lAlt)
{
EditorUndoEx.Record(undoRecordObject);
_lAlt = newBool;
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical("Box");
newBool = EditorGUILayout.ToggleLeft("LShift", _lShift, GUILayout.Width(toggleWidth));
if (newBool != _lShift)
{
EditorUndoEx.Record(undoRecordObject);
_lShift = newBool;
}
EditorGUILayout.EndVertical();
EditorGUILayout.EndHorizontal();
EditorGUILayout.EndVertical();
}
protected override void RenderContent(UnityEngine.Object undoRecordObject)
{
bool newBool; float newFloat; int newInt;
TransformAxis newTransformAxis;
EditorGUILayoutEx.SectionHeader("Alignment");
var content = new GUIContent();
content.text = "Align axis";
content.tooltip = "If this is checked, the grabbed objects will have their local axes aligned with the grab surface normal.";
newBool = EditorGUILayout.ToggleLeft(content, AlignAxis);
if (newBool != AlignAxis)
{
EditorUndoEx.Record(undoRecordObject);
AlignAxis = newBool;
}
content.text = "Alignment axis";
content.tooltip = "When axis alignment is turned on, this is the axis that will be aligned to the surface normal.";
newTransformAxis = (TransformAxis)EditorGUILayout.EnumPopup(content, AlignmentAxis);
if (newTransformAxis != AlignmentAxis)
{
EditorUndoEx.Record(undoRecordObject);
AlignmentAxis = newTransformAxis;
}
EditorGUILayout.Separator();
EditorGUILayoutEx.SectionHeader("Sensitivity");
content.text = "Rotation";
content.tooltip = "Allows you to control how sensitive object rotation is to the input device.";
newFloat = EditorGUILayout.FloatField(content, RotationSensitivity);
if (newFloat != RotationSensitivity)
{
EditorUndoEx.Record(undoRecordObject);
RotationSensitivity = newFloat;
}
content.text = "Scale";
content.tooltip = "Allows you to control how sensitive object scaling is to the input device.";
newFloat = EditorGUILayout.FloatField(content, ScaleSensitivity);
if (newFloat != ScaleSensitivity)
{
EditorUndoEx.Record(undoRecordObject);
ScaleSensitivity = newFloat;
}
content.text = "Offset from surface";
content.tooltip = "Sensitivity value used when offseting objects from the surface on which they are sitting.";
newFloat = EditorGUILayout.FloatField(content, OffsetFromSurfaceSensitivity);
if (newFloat != OffsetFromSurfaceSensitivity)
{
EditorUndoEx.Record(undoRecordObject);
OffsetFromSurfaceSensitivity = newFloat;
}
content.text = "Offset from anchor";
content.tooltip = "Sensitivity value used when offseting objects from the anchor point.";
newFloat = EditorGUILayout.FloatField(content, OffsetFromAnchorSensitivity);
if (newFloat != OffsetFromAnchorSensitivity)
{
EditorUndoEx.Record(undoRecordObject);
OffsetFromAnchorSensitivity = newFloat;
}
EditorGUILayout.Separator();
EditorGUILayoutEx.SectionHeader("Surface");
content.text = "Default offset";
content.tooltip = "A default offset value which controls the distance between the objects and the surface they are sitting on. Negative values can be used to embed objects in the surface.";
newFloat = EditorGUILayout.FloatField(content, DefaultOffsetFromSurface);
if (newFloat != DefaultOffsetFromSurface)
{
EditorUndoEx.Record(undoRecordObject);
DefaultOffsetFromSurface = newFloat;
}
content.text = "Surface flags";
content.tooltip = "Allows you to specify the types of surfaces that can be used during a grab session.";
newInt = (int)((ObjectGrabSurfaceFlags)EditorGUILayout.EnumMaskPopup(content, (ObjectGrabSurfaceFlags)SurfaceFlags));
if (newInt != (int)SurfaceFlags)
{
EditorUndoEx.Record(undoRecordObject);
SurfaceFlags = (ObjectGrabSurfaceFlags)newInt;
}
content.text = "Surface layers";
content.tooltip = "Allows you to specify which layers can be used as snap surface during a grab session.";
newInt = EditorGUILayoutEx.LayerMaskField(content, SurfaceLayers);
if (newInt != SurfaceLayers)
{
EditorUndoEx.Record(undoRecordObject);
SurfaceLayers = newInt;
}
content.text = "Spherical mesh layers";
content.tooltip = "Objects that belong to these layers will be treated as spherical meshes (spheres). This allows the system to make " +
"certain assumptions about the surface geometry in order to produce the correct results.";
newInt = EditorGUILayoutEx.LayerMaskField(content, SphericalMeshLayers);
if (newInt != SphericalMeshLayers)
{
EditorUndoEx.Record(undoRecordObject);
SphericalMeshLayers = newInt;
}
content.text = "Terrain mesh layers";
content.tooltip = "Objects that belong to these layers will be treated as terrain meshes (meshes that resemble a terrain but are NOT Unity Terrains). This allows the system to make " +
"certain assumptions about the surface geometry in order to produce the correct results.";
newInt = EditorGUILayoutEx.LayerMaskField(content, TerrainMeshLayers);
if (newInt != TerrainMeshLayers)
{
EditorUndoEx.Record(undoRecordObject);
TerrainMeshLayers = newInt;
}
EditorGUILayout.Separator();
EditorGUILayoutEx.SectionHeader("Per layer settings");
EditorGUILayout.BeginHorizontal();
content.text = "Add";
content.tooltip = "Adds grab settings which apply only to the chosen layer. Objects which belong to that layer will use these settings during a grab session.";
if (GUILayout.Button(content, GUILayout.Width(70.0f)))
{
EditorUndoEx.Record(undoRecordObject);
GetLayerGrabSettings(_newLayer).IsActive = true;
}
newInt = EditorGUILayout.LayerField(_newLayer);
if (newInt != _newLayer)
{
EditorUndoEx.Record(undoRecordObject);
_newLayer = newInt;
}
EditorGUILayout.EndHorizontal();
foreach (var layerGrabSettings in _layerGrabSettings)
{
if (layerGrabSettings.IsActive)
{
EditorGUILayout.BeginVertical("Box");
EditorGUILayout.HelpBox(LayerMask.LayerToName(layerGrabSettings.Layer), MessageType.None);
content.text = "Align axis";
content.tooltip = "If this is checked, the grabbed objects that belong to this layer will have their local axes aligned with the grab surface normal.";
newBool = EditorGUILayout.ToggleLeft(content, layerGrabSettings.AlignAxis);
if (newBool != layerGrabSettings.AlignAxis)
{
EditorUndoEx.Record(undoRecordObject);
layerGrabSettings.AlignAxis = newBool;
}
content.text = "Alignment axis";
content.tooltip = "When axis alignment is turned on, this is the axis that will be aligned to the surface normal.";
newTransformAxis = (TransformAxis)EditorGUILayout.EnumPopup(content, layerGrabSettings.AlignmentAxis);
if (newTransformAxis != layerGrabSettings.AlignmentAxis)
{
EditorUndoEx.Record(undoRecordObject);
layerGrabSettings.AlignmentAxis = newTransformAxis;
}
content.text = "Default offset from surface";
content.tooltip = "A default offset value which controls the distance between the objects and the surface they are sitting on. Negative values can be used to embed objects in the surface.";
newFloat = EditorGUILayout.FloatField(content, layerGrabSettings.DefaultOffsetFromSurface);
if (newFloat != layerGrabSettings.DefaultOffsetFromSurface)
{
EditorUndoEx.Record(undoRecordObject);
layerGrabSettings.DefaultOffsetFromSurface = newFloat;
}
content.text = "Remove";
content.tooltip = "Removes the settings for this layer.";
if (GUILayout.Button(content, GUILayout.Width(70.0f)))
{
EditorUndoEx.Record(undoRecordObject);
layerGrabSettings.IsActive = false;
}
EditorGUILayout.EndVertical();
}
}
}
