public static bool Configure_PICkitSerial_For_I2CSlave_Auto_Mode(byte p_slave_addr, byte p_slave_mask, byte p_array_byte_count, ref byte[] p_profile_array, ref string p_result_str)
{
byte[] array = new byte[65];
byte[] array2 = new byte[255];
byte[] array3 = new byte[65];
bool result = false;
string text = "";
Array.Clear(array, 0, array.Length);
Array.Clear(array3, 0, array3.Length);
Mode.update_status_packet_data(7, ref array3);
array3[23] = 2;
array3[29] = p_slave_addr;
array3[30] = p_slave_mask;
USBWrite.configure_outbound_control_block_packet(ref array, ref text, ref array3);
USBWrite.Send_Cold_Reset_Cmd();
bool flag = USBWrite.Send_Data_Packet_To_PICkitS(ref array);
Array.Clear(array2, 0, array2.Length);
array2[0] = 0;
array2[1] = 5;
array2[2] = p_array_byte_count;
for (int i = 3; i < (int)(p_array_byte_count + 3); i++)
{
array2[i] = p_profile_array[i - 3];
}
USBWrite.Send_Script_To_PICkitS(ref array2);
USBWrite.Send_Warm_Reset_Cmd();
if (flag)
{
if (USBWrite.Update_Status_Packet())
{
Utilities.m_flags.g_status_packet_mutex.WaitOne();
int j;
for (j = 7; j < 31; j++)
{
if (Constants.STATUS_PACKET_DATA[j] != array[j - 5])
{
p_result_str = string.Format("Byte {0} failed verification in config block write.\n Value reads {1:X2}, but should be {2:X2}.", j - 7, Constants.STATUS_PACKET_DATA[j], array[j - 5]);
break;
}
}
if (j == 31)
{
result = true;
p_result_str = string.Format("PICkit Serial Analyzer correctly updated.", new object[0]);
}
Utilities.m_flags.g_status_packet_mutex.ReleaseMutex();
}
else
{
p_result_str = string.Format("Error requesting config verification - Config Block may not be updated correctly", new object[0]);
}
}
else
{
p_result_str = string.Format("Error sending config packet - Config Block may not be updated correctly", new object[0]);
}
return(result);
}
private static void Reset_Control_Block_Thread()
{
m_reset_cb.WaitOne();
string str = "";
byte[] array = new byte[0x41];
byte[] buffer2 = new byte[0x41];
string str2 = "";
Array.Clear(array, 0, array.Length);
Array.Clear(buffer2, 0, buffer2.Length);
I2CS.reset_buffers();
if (USBWrite.Update_Status_Packet())
{
Utilities.m_flags.g_status_packet_mutex.WaitOne();
for (int i = 0; i < array.Length; i++)
{
array[i] = Constants.STATUS_PACKET_DATA[i];
}
Utilities.m_flags.g_status_packet_mutex.ReleaseMutex();
USBWrite.configure_outbound_control_block_packet(ref buffer2, ref str, ref array);
USBWrite.write_and_verify_config_block(ref buffer2, ref str, true, ref str2);
}
m_reset_cb.ReleaseMutex();
}
public static bool Send_LED_State_Cmd(int p_LED_num, byte p_value)
{
byte[] array = new byte[65];
Array.Clear(array, 0, array.Length);
array[1] = 3;
array[2] = 2;
switch (p_LED_num)
{
case 1:
array[3] = 18;
break;
case 2:
array[3] = 19;
break;
default:
return(false);
}
array[4] = p_value;
array[5] = 0;
bool result = USBWrite.Send_Data_Packet_To_PICkitS(ref array);
USBWrite.Update_Status_Packet();
return(result);
}
public static bool Configure_PICkitSerial_For_I2CSlave_Auto_Mode(byte p_slave_addr, byte p_slave_mask, byte p_array_byte_count, ref byte[] p_profile_array, ref string p_result_str)
{
bool flag = false;
byte[] array = new byte[0x41];
byte[] buffer2 = new byte[0xff];
byte[] buffer3 = new byte[0x41];
bool flag2 = false;
string str = "";
int index = 0;
Array.Clear(array, 0, array.Length);
Array.Clear(buffer3, 0, buffer3.Length);
Mode.update_status_packet_data(7, ref buffer3);
buffer3[0x17] = 2;
buffer3[0x1d] = p_slave_addr;
buffer3[30] = p_slave_mask;
USBWrite.configure_outbound_control_block_packet(ref array, ref str, ref buffer3);
USBWrite.Send_Cold_Reset_Cmd();
flag = USBWrite.Send_Data_Packet_To_PICkitS(ref array);
Array.Clear(buffer2, 0, buffer2.Length);
buffer2[0] = 0;
buffer2[1] = 5;
buffer2[2] = p_array_byte_count;
for (int i = 3; i < (p_array_byte_count + 3); i++)
{
buffer2[i] = p_profile_array[i - 3];
}
USBWrite.Send_Script_To_PICkitS(ref buffer2);
USBWrite.Send_Warm_Reset_Cmd();
if (!flag)
{
p_result_str = string.Format("Error sending config packet - Config Block may not be updated correctly", new object[0]);
return(flag2);
}
if (!USBWrite.Update_Status_Packet())
{
p_result_str = string.Format("Error requesting config verification - Config Block may not be updated correctly", new object[0]);
return(flag2);
}
Utilities.m_flags.g_status_packet_mutex.WaitOne();
index = 7;
while (index < 0x1f)
{
if (Constants.STATUS_PACKET_DATA[index] != array[index - 5])
{
p_result_str = string.Format("Byte {0} failed verification in config block write.\n Value reads {1:X2}, but should be {2:X2}.", index - 7, Constants.STATUS_PACKET_DATA[index], array[index - 5]);
break;
}
index++;
}
if (index == 0x1f)
{
flag2 = true;
p_result_str = string.Format("PICkit Serial Analyzer correctly updated.", new object[0]);
}
Utilities.m_flags.g_status_packet_mutex.ReleaseMutex();
return(flag2);
}
public static void Send_CommClear_Cmd()
{
USBWrite.m_command_byte_array[0] = 0;
USBWrite.m_command_byte_array[1] = 1;
USBWrite.m_command_byte_array[2] = 7;
USBWrite.m_command_byte_array[3] = 0;
USBWrite.m_command_byte_array[4] = 0;
USBWrite.Send_Data_Packet_To_PICkitS(ref USBWrite.m_command_byte_array);
USBWrite.Update_Status_Packet();
}
public static bool Send_CommReset_Cmd()
{
USBWrite.m_command_byte_array[0] = 0;
USBWrite.m_command_byte_array[1] = 1;
USBWrite.m_command_byte_array[2] = 6;
USBWrite.m_command_byte_array[3] = 0;
USBWrite.m_command_byte_array[4] = 0;
bool result = USBWrite.Send_Data_Packet_To_PICkitS(ref USBWrite.m_command_byte_array);
USBWrite.Update_Status_Packet();
return(result);
}
public static bool write_and_verify_config_block(ref byte[] p_control_block_data, ref string p_result_str, bool p_perform_warm_and_cold_reset, ref string p_cb_data_str)
{
bool result = false;
if (p_perform_warm_and_cold_reset)
{
USBWrite.Send_Cold_Reset_Cmd();
}
bool flag = USBWrite.Send_Data_Packet_To_PICkitS(ref p_control_block_data);
if (p_perform_warm_and_cold_reset)
{
USBWrite.Send_Warm_Reset_Cmd();
}
if (flag)
{
if (USBWrite.Update_Status_Packet())
{
Utilities.m_flags.g_status_packet_mutex.WaitOne();
int i;
for (i = 7; i < 31; i++)
{
if (Constants.STATUS_PACKET_DATA[i] != p_control_block_data[i - 5])
{
p_result_str = string.Format("Byte {0} failed verification in config block write.\n Value reads {1:X2}, but should be {2:X2}.", i - 7, Constants.STATUS_PACKET_DATA[i], p_control_block_data[i - 5]);
break;
}
}
if (i == 31)
{
result = true;
p_result_str = string.Format("PICkit Serial Analyzer correctly updated.", new object[0]);
p_cb_data_str = "";
for (i = 7; i < 31; i++)
{
p_cb_data_str += string.Format("{0:X2} ", Constants.STATUS_PACKET_DATA[i]);
}
}
Utilities.m_flags.g_status_packet_mutex.ReleaseMutex();
}
else
{
p_result_str = string.Format("Error requesting config verification - Config Block may not be updated correctly", new object[0]);
}
}
else
{
p_result_str = string.Format("Error sending config packet - Config Block may not be updated correctly", new object[0]);
}
return(result);
}
public static bool Send_Warm_Reset_Cmd()
{
USBRead.m_EVENT_TIME_ROLLOVER = 0.0;
USBRead.m_RUNNING_TIME = 0.0;
USBWrite.m_command_byte_array[0] = 0;
USBWrite.m_command_byte_array[1] = 1;
USBWrite.m_command_byte_array[2] = 1;
USBWrite.m_command_byte_array[3] = 0;
USBWrite.m_command_byte_array[4] = 0;
bool result = USBWrite.Send_Data_Packet_To_PICkitS(ref USBWrite.m_command_byte_array);
USBWrite.Update_Status_Packet();
return(result);
}
public static bool Get_Status_Packet(ref byte[] p_status_packet)
{
bool flag = false;
if (!USBWrite.Update_Status_Packet())
{
return(flag);
}
Utilities.m_flags.g_status_packet_mutex.WaitOne();
for (int i = 0; i < Constants.STATUS_PACKET_DATA.Length; i++)
{
p_status_packet[i] = Constants.STATUS_PACKET_DATA[i];
}
Utilities.m_flags.g_status_packet_mutex.ReleaseMutex();
return(true);
}
public static bool Send_CtrlBlkWrite_Cmd(ref byte[] p_data_array)
{
byte[] array = new byte[65];
Array.Clear(array, 0, array.Length);
array[0] = 0;
array[1] = 2;
int i;
for (i = 0; i < 24; i++)
{
array[i + 2] = p_data_array[i];
}
array[i] = 0;
USBWrite.Send_Cold_Reset_Cmd();
bool result = USBWrite.Send_Data_Packet_To_PICkitS(ref array);
USBWrite.Send_Warm_Reset_Cmd();
USBWrite.Update_Status_Packet();
return(result);
}
public static bool Add_LIN_Slave_Profile_To_PKS(byte p_array_byte_count, ref byte[] p_profile_array, ref string p_result_str, ref int p_error_code)
{
bool flag = false;
byte[] array = new byte[0x41];
byte[] buffer2 = new byte[0xff];
byte[] buffer3 = new byte[0x41];
bool flag2 = false;
byte num = 0;
byte num2 = 0;
string str = "";
int index = 0;
p_error_code = 0;
Array.Clear(array, 0, array.Length);
Array.Clear(buffer3, 0, buffer3.Length);
byte num4 = Number_Of_Bytes_In_CBUF3(ref num, ref num2);
if (p_array_byte_count > num4)
{
p_result_str = string.Format("Byte count of {0} greater than allowed value of {1}.", p_array_byte_count, num4);
p_error_code = 1;
return(flag);
}
USBWrite.Clear_CBUF(3);
if (!Basic.Get_Status_Packet(ref buffer3))
{
p_result_str = string.Format("Error reading status packet.", new object[0]);
p_error_code = 2;
return(false);
}
buffer3[0x17] = (byte)(buffer3[0x17] | 0x20);
USBWrite.configure_outbound_control_block_packet(ref array, ref str, ref buffer3);
flag = USBWrite.Send_Data_Packet_To_PICkitS(ref array);
Array.Clear(buffer2, 0, buffer2.Length);
buffer2[0] = 0;
buffer2[1] = 5;
buffer2[2] = p_array_byte_count;
for (int i = 3; i < (p_array_byte_count + 3); i++)
{
buffer2[i] = p_profile_array[i - 3];
}
bool flag3 = USBWrite.Send_Script_To_PICkitS(ref buffer2);
if (!(flag & flag3))
{
p_error_code = 2;
p_result_str = string.Format("Error sending config packet - Config Block may not be updated correctly", new object[0]);
return(flag2);
}
if (!USBWrite.Update_Status_Packet())
{
p_result_str = string.Format("Error requesting config verification - Config Block may not be updated correctly", new object[0]);
return(flag2);
}
Utilities.m_flags.g_status_packet_mutex.WaitOne();
index = 7;
while (index < 0x1f)
{
if (Constants.STATUS_PACKET_DATA[index] != array[index - 5])
{
p_error_code = 3;
p_result_str = string.Format("Byte {0} failed verification in config block write.\n Value reads {1:X2}, but should be {2:X2}.", index - 7, Constants.STATUS_PACKET_DATA[index], array[index - 5]);
break;
}
index++;
}
if (index == 0x1f)
{
flag2 = true;
p_result_str = string.Format("PICkit Serial Analyzer correctly updated.", new object[0]);
}
Utilities.m_flags.g_status_packet_mutex.ReleaseMutex();
return(flag2);
}
public static bool Send_Script_To_PICkitS(ref byte[] p_send_byte_array)
{
bool result;
lock (USBWrite.m_priv_write_script_lock)
{
USBWrite.m_data_buffer_is_empty = false;
bool flag = false;
uint num = 0u;
uint num2 = (uint)p_send_byte_array[2];
byte[] array = new byte[65];
USBWrite.m_last_script_array_mutex.WaitOne();
USBWrite.m_last_script_array_byte_count = (byte)(num2 + 2u);
Array.Clear(USBWrite.m_last_script_array, 0, USBWrite.m_last_script_array.Length);
for (int i = 0; i < (int)USBWrite.m_last_script_array_byte_count; i++)
{
USBWrite.m_last_script_array[i] = p_send_byte_array[i + 1];
}
Utilities.m_flags.g_PKSA_has_completed_script.Reset();
USBWrite.m_last_script_array_mutex.ReleaseMutex();
uint num3 = num2 / 62u;
byte b = (byte)(num2 % 62u);
if (b != 0)
{
num3 += 1u;
}
int num4 = 0;
while ((long)num4 < (long)((ulong)num3))
{
Array.Clear(array, 0, array.Length);
array[0] = p_send_byte_array[0];
array[1] = p_send_byte_array[1];
uint num5;
uint num6;
if (num3 != 1u)
{
num5 = 3u;
if ((long)num4 == (long)((ulong)(num3 - 1u)) && b != 0)
{
num6 = (uint)(b + 4);
array[2] = b;
}
else
{
num6 = 65u;
array[2] = 62;
}
}
else
{
num6 = num2 + 4u;
num5 = 2u;
}
for (uint num7 = num5; num7 < num6; num7 += 1u)
{
array[(int)((UIntPtr)num7)] = p_send_byte_array[(int)((UIntPtr)(num + num7))];
}
if (num3 != 1u)
{
num += 62u;
if ((long)num4 == (long)((ulong)(num3 - 1u)))
{
num += 1u;
}
}
if (array[1] == 3)
{
if (!USBWrite.there_is_room_in_cbuf1(array[2]))
{
result = false;
return(result);
}
USBWrite.m_cbuf1_avail_bytes_mutex.WaitOne();
USBWrite.m_cbuf1_avail_bytes -= array[2];
USBWrite.m_cbuf1_avail_bytes_mutex.ReleaseMutex();
if (!USBWrite.Send_Data_Packet_To_PICkitS(ref array))
{
result = false;
return(result);
}
if (USBWrite.There_Was_A_Write_Error())
{
result = false;
return(result);
}
}
else
{
if (!USBWrite.Send_Data_Packet_To_PICkitS(ref array))
{
result = false;
return(result);
}
if (USBWrite.There_Was_A_Write_Error())
{
result = false;
return(result);
}
}
num4++;
}
if (array[1] == 3)
{
if (USBWrite.m_use_script_timeout)
{
bool flag2 = Utilities.m_flags.g_PKSA_has_completed_script.WaitOne(USBWrite.m_universal_timeout, false);
if (flag2 && USBWrite.Update_Status_Packet())
{
uint num8 = 0u;
if (!Status.There_Is_A_Status_Error(ref num8))
{
flag = true;
}
}
}
else
{
flag = true;
}
}
else
{
flag = true;
}
USBWrite.m_data_buffer_is_empty = true;
result = flag;
}
return(result);
}
public static bool Transaction_Is_Complete()
{
bool result = false;
if (USBWrite.We_Are_Done_Writing_Data() && !USBRead.m_read_thread_is_processing_a_USB_packet && USBWrite.Update_Status_Packet())
{
Utilities.m_flags.g_status_packet_mutex.WaitOne();
if ((Constants.STATUS_PACKET_DATA[37] & 1) == 0 && Constants.STATUS_PACKET_DATA[55] == 0)
{
result = true;
}
Utilities.m_flags.g_status_packet_mutex.ReleaseMutex();
}
return(result);
}
public static bool Add_LIN_Slave_Profile_To_PKS(byte p_array_byte_count, ref byte[] p_profile_array, ref string p_result_str, ref int p_error_code)
{
bool flag = false;
byte[] array = new byte[65];
byte[] array2 = new byte[255];
byte[] array3 = new byte[65];
bool result = false;
byte b = 0;
byte b2 = 0;
string text = "";
p_error_code = 0;
Array.Clear(array, 0, array.Length);
Array.Clear(array3, 0, array3.Length);
byte b3 = LIN.Number_Of_Bytes_In_CBUF3(ref b, ref b2);
if (p_array_byte_count > b3)
{
p_result_str = string.Format("Byte count of {0} greater than allowed value of {1}.", p_array_byte_count, b3);
p_error_code = 1;
return(flag);
}
USBWrite.Clear_CBUF(3);
if (!Basic.Get_Status_Packet(ref array3))
{
p_result_str = string.Format("Error reading status packet.", new object[0]);
p_error_code = 2;
return(false);
}
byte[] expr_A6_cp_0 = array3;
int expr_A6_cp_1 = 23;
expr_A6_cp_0[expr_A6_cp_1] |= 32;
USBWrite.configure_outbound_control_block_packet(ref array, ref text, ref array3);
flag = USBWrite.Send_Data_Packet_To_PICkitS(ref array);
Array.Clear(array2, 0, array2.Length);
array2[0] = 0;
array2[1] = 5;
array2[2] = p_array_byte_count;
for (int i = 3; i < (int)(p_array_byte_count + 3); i++)
{
array2[i] = p_profile_array[i - 3];
}
bool flag2 = USBWrite.Send_Script_To_PICkitS(ref array2);
if (flag & flag2)
{
if (USBWrite.Update_Status_Packet())
{
Utilities.m_flags.g_status_packet_mutex.WaitOne();
int j;
for (j = 7; j < 31; j++)
{
if (Constants.STATUS_PACKET_DATA[j] != array[j - 5])
{
p_error_code = 3;
p_result_str = string.Format("Byte {0} failed verification in config block write.\n Value reads {1:X2}, but should be {2:X2}.", j - 7, Constants.STATUS_PACKET_DATA[j], array[j - 5]);
break;
}
}
if (j == 31)
{
result = true;
p_result_str = string.Format("PICkit Serial Analyzer correctly updated.", new object[0]);
}
Utilities.m_flags.g_status_packet_mutex.ReleaseMutex();
}
else
{
p_result_str = string.Format("Error requesting config verification - Config Block may not be updated correctly", new object[0]);
}
}
else
{
p_error_code = 2;
p_result_str = string.Format("Error sending config packet - Config Block may not be updated correctly", new object[0]);
}
return(result);
}
