public void Run_WorkFlow_3Dv_updateA3D_Case1695() // //case 1.9.2_WorkFlow_3Dv_updateA3D
{
int runCount = 0;
foreach (InputDataSet ids in this.Input.DataSets)
{
runCount++;
Round r = this.NewRound(runCount.ToString(), ids.Description);
try
{
string patientID = "";
string volumeID = "";
string analysis3dID = "";
#region Step 0: prepare data
for (int i = 0; i < ids.InputParameters.Count; i++)
{
if (ids.InputParameters.GetParameter(i).Step == "volume")
{
if (ids.InputParameters.GetParameter(i).Key == "internal_id")
{
volumeID = ids.InputParameters.GetParameter(i).Value;
}
}
}
#endregion
#region Step 1: get listAnalyses3DOfVolume
CheckPoint cpGetVolumeInfo = new CheckPoint("Get Analysis3D of Volume", "Call listAnalyses3DOfVolume");
r.CheckPoints.Add(cpGetVolumeInfo);
VolumeService volsrv = new VolumeService();
XMLResult getA3dOfVolRsl = volsrv.listAnalyses3DOfVolume(volumeID, "all");
if (getA3dOfVolRsl.IsErrorOccured)
{
cpGetVolumeInfo.Result = TestResult.Fail;
cpGetVolumeInfo.Outputs.AddParameter("Get Analysis3D of Volume", "Call listAnalyses3DOfVolume", getA3dOfVolRsl.Message);
SaveRound(r);
break;
}
else
{
cpGetVolumeInfo.Result = TestResult.Pass;
cpGetVolumeInfo.Outputs.AddParameter("Get Analysis3D of Volume", "Call listAnalyses3DOfVolume", getA3dOfVolRsl.ResultContent);
}
#endregion
#region Step 2: get Analysis3d
CheckPoint cpGetAnalysis3d = new CheckPoint("Get Analysis3d Info", "Call getAnalysis3DInfo");
r.CheckPoints.Add(cpGetAnalysis3d);
Analysis3DService a3dsrv = new Analysis3DService();
int matchItem = 0;
analysis3dID = getA3dOfVolRsl.MultiResults[0].Parameters[0].ParameterValue;
XMLResult getA3dRsl = a3dsrv.getAnalysis3DInfo(analysis3dID);
if (getA3dRsl.IsErrorOccured)
{
cpGetAnalysis3d.Result = TestResult.Fail;
cpGetAnalysis3d.Outputs.AddParameter("Get Analysis3d Info", "Call getAnalysis3DInfo", getA3dRsl.Message);
SaveRound(r);
break;
}
for (int i = 0; i < getA3dRsl.MultiResults[0].Parameters.Count; i++)
{
if (getA3dRsl.MultiResults[0].Parameters[i].ParameterName == "current"
&& getA3dRsl.MultiResults[0].Parameters[i].ParameterValue == "true")
{
matchItem++;
}
}
cpGetAnalysis3d.Outputs.AddParameter("Get Analysis3d Info 1:", "Call getAnalysis3DInfo", getA3dRsl.ResultContent);
analysis3dID = getA3dOfVolRsl.MultiResults[0].Parameters[1].ParameterValue;
getA3dRsl = a3dsrv.getAnalysis3DInfo(analysis3dID);
if (getA3dRsl.IsErrorOccured)
{
cpGetAnalysis3d.Result = TestResult.Fail;
cpGetAnalysis3d.Outputs.AddParameter("Get Analysis3d Info", "Call getAnalysis3DInfo", getA3dRsl.Message);
SaveRound(r);
break;
}
for (int i = 0; i < getA3dRsl.MultiResults[0].Parameters.Count; i++)
{
if (getA3dRsl.MultiResults[0].Parameters[i].ParameterName == "current"
&& getA3dRsl.MultiResults[0].Parameters[i].ParameterValue == "false")
{
matchItem++;
}
}
cpGetAnalysis3d.Outputs.AddParameter("Get Analysis3d Info 2:", "Call getAnalysis3DInfo", getA3dRsl.ResultContent);
if (matchItem == 2)
{
cpGetAnalysis3d.Result = TestResult.Pass;
cpGetAnalysis3d.Outputs.AddParameter("Get Analysis3d Info", "Call getAnalysis3DInfo", "All current parameter is OK");
}
else
{
cpGetAnalysis3d.Result = TestResult.Fail;
cpGetAnalysis3d.Outputs.AddParameter("Get Analysis3d Info", "Call getAnalysis3DInfo", "Not all current parameter is OK");
}
#endregion
/*
#region Step 1: set Analysis3d
CheckPoint cpSetAnalysis3d = new CheckPoint("Set Analysis3d Info", "Call setAnalysis3DInfo");
r.CheckPoints.Add(cpSetAnalysis3d);
XMLParameter a3dpara = new XMLParameter("analysis3d");
a3dpara.AddParameter("name", "New Analysis");
a3dpara.AddParameter("comments", "Comments for New Analysis");
a3dpara.AddParameter("current", "false");
XMLResult seta3dRsl = a3dsrv.setAnalysis3DInfo(analysis3dID, a3dpara);
if (seta3dRsl.IsErrorOccured)
{
cpSetAnalysis3d.Result = TestResult.Fail;
cpSetAnalysis3d.Outputs.AddParameter("Set Analysis3d Info", "Call setAnalysis3DInfo", seta3dRsl.Message);
SaveRound(r);
break;
}
getA3dRsl = a3dsrv.getAnalysis3DInfo(analysis3dID);
if (!getA3dRsl.IsErrorOccured)
{
int successCount = 0;
for (int i = 0; i < getA3dRsl.MultiResults[0].Parameters.Count; i++)
{
if (getA3dRsl.MultiResults[0].Parameters[i].ParameterName == "name"
&& getA3dRsl.MultiResults[0].Parameters[i].ParameterValue == "New Analysis")
{
successCount++;
}
if (getA3dRsl.MultiResults[0].Parameters[i].ParameterName == "comments"
&& getA3dRsl.MultiResults[0].Parameters[i].ParameterValue == "Comments for New Analysis")
{
successCount++;
}
if (getA3dRsl.MultiResults[0].Parameters[i].ParameterName == "current"
&& getA3dRsl.MultiResults[0].Parameters[i].ParameterValue == "false")
{
successCount++;
}
}
if (successCount == 3)
{
cpSetAnalysis3d.Result = TestResult.Pass;
cpSetAnalysis3d.Outputs.AddParameter("get Analysis3d Info after Set", "Call setAnalysis3DInfo", getA3dRsl.ResultContent);
}
else
{
cpSetAnalysis3d.Result = TestResult.Fail;
cpSetAnalysis3d.Outputs.AddParameter("get Analysis3d Info after Set", "Call setAnalysis3DInfo", "The Set value not match");
}
}
#endregion
#region Step 2: set Analysis3d to current
CheckPoint cpSetAnalysis3dCurrent = new CheckPoint("Set Analysis3d to Current", "Call setAnalysis3DToCurrent");
r.CheckPoints.Add(cpSetAnalysis3dCurrent);
XMLResult seta3dToCurrentRsl = a3dsrv.setAnalysis3DToCurrent(analysis3dID);
bool getCurrent = false;
getA3dRsl = a3dsrv.getAnalysis3DInfo(analysis3dID);
for (int i = 0; i < getA3dRsl.MultiResults[0].Parameters.Count; i++)
{
if (getA3dRsl.MultiResults[0].Parameters[i].ParameterName == "current"
&& getA3dRsl.MultiResults[0].Parameters[i].ParameterValue == "true")
{
getCurrent = true;
cpSetAnalysis3dCurrent.Result = TestResult.Pass;
cpSetAnalysis3dCurrent.Outputs.AddParameter("get Analysis3d Info after setAnalysis3DToCurrent", "Call setAnalysis3DToCurrent", "The Set value is OK");
break;
}
}
if (!getCurrent)
{
cpSetAnalysis3dCurrent.Result = TestResult.Fail;
cpSetAnalysis3dCurrent.Outputs.AddParameter("get Analysis3d Info after setAnalysis3DToCurrent", "Call setAnalysis3DToCurrent", "setAnalysis3DToCurrent is not work");
}
#endregion
*/
SaveRound(r);
}
catch (Exception ex)
{
CheckPoint cp = new CheckPoint();
r.CheckPoints.Add(cp);
cp.Result = TestResult.Fail;
cp.Outputs.AddParameter("Exception thrown", "Exception Message", ex.Message);
SaveRound(r);
}
}
Output();
}
public void Run_WorkFlow_3Dv_createVolume_with_created_and_set_a3d_Case1660() // //case 1.9.1_WorkFlow_3Dv_createVolume_with_created_and_set_a3d
{
int runCount = 0;
foreach (InputDataSet ids in this.Input.DataSets)
{
runCount++;
Round r = this.NewRound(runCount.ToString(), ids.Description);
try
{
#region Parameter initialize
string volumeID = "";
//for create volume
XMLParameter cSeriesData = new XMLParameter("series");
XMLParameter cVolumeData = new XMLParameter("volume");
XMLParameter cSlicePathData = new XMLParameter("slices_path_list");
//for create study
XMLParameter studyPara = new XMLParameter("request");
XMLParameter xmlAnalysisInfo = new XMLParameter("analysis3d");
for (int i = 0; i < ids.InputParameters.Count; i++)
{
switch (ids.InputParameters.GetParameter(i).Step)
{
case "series":
cSeriesData.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value, false);
break;
case "volume":
cVolumeData.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value, false);
break;
case "slices_path_list":
cSlicePathData.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value, false);
break;
case "study":
studyPara.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "seta3d":
xmlAnalysisInfo.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
}
}
#endregion
#region Step 0: Create Study
string studyUID = string.Empty;
StudyService stusrv = new StudyService();
XMLResult stuRsl = stusrv.createStudy(studyPara);
if (stuRsl.IsErrorOccured)
{
continue;
}
else
{
studyUID = stuRsl.SingleResult;
}
#endregion
#region Step 1: Create Volume
CheckPoint cpCreateVolume = new CheckPoint("Create Volume Info", "Call createVolume");
r.CheckPoints.Add(cpCreateVolume);
XMLParameterCollection cInputData = new XMLParameterCollection();
cInputData.Add(cSeriesData);
cInputData.Add(cVolumeData);
cInputData.Add(cSlicePathData);
VolumeService volumesrv = new VolumeService();
XMLResult rslCreate = volumesrv.createVolume(studyUID, cInputData);
if (rslCreate.IsErrorOccured)
{
cpCreateVolume.Result = TestResult.Fail;
cpCreateVolume.Outputs.AddParameter("Create Volume Info", "Call createVolume", rslCreate.Message);
SaveRound(r);
continue;
}
else
{
cpCreateVolume.Result = TestResult.Pass;
cpCreateVolume.Outputs.AddParameter("Create Volume Info", "Call createVolume", rslCreate.ResultContent);
volumeID = rslCreate.SingleResult;
}
#endregion
#region Step 2: Create Analysis3D
CheckPoint cpCreateA3d = new CheckPoint("Create Analysis3D", "Call createAnalysis3D");
r.CheckPoints.Add(cpCreateA3d);
Analysis3DService a3dsrv = new Analysis3DService();
XMLParameter a3dpara = new XMLParameter("analysis3d");
a3dpara.AddParameter("analysis3D_xml", "analysis3D_xml");
XMLResult a3dcreateRsl = a3dsrv.createAnalysis3D(volumeID, a3dpara);
string a3duid = "";
if (a3dcreateRsl.IsErrorOccured)
{
cpCreateA3d.Result = TestResult.Fail;
cpCreateA3d.Outputs.AddParameter("Create Analysis3D", "Call createAnalysis3D", a3dcreateRsl.Message);
SaveRound(r);
continue;
}
else
{
cpCreateA3d.Result = TestResult.Pass;
cpCreateA3d.Outputs.AddParameter("Create Analysis3D", "Call createAnalysis3D", a3dcreateRsl.ResultContent);
a3duid = a3dcreateRsl.SingleResult;
}
#endregion
#region Step 3: Set Analysis3D
CheckPoint cpSetA3d = new CheckPoint("Set Analysis3D", "Call setAnalysis3DInfo");
r.CheckPoints.Add(cpSetA3d);
XMLResult seta3dRsl = a3dsrv.setAnalysis3DInfo(a3duid, xmlAnalysisInfo);
if (seta3dRsl.IsErrorOccured)
{
cpSetA3d.Result = TestResult.Fail;
cpSetA3d.Outputs.AddParameter("Set Analysis3D", "Call setAnalysis3DInfo", seta3dRsl.Message);
SaveRound(r);
continue;
}
else
{
XMLResult geta3dRsl = a3dsrv.getAnalysis3DInfo(a3duid);
int matchCount = 0;
for (int j = 0; j < geta3dRsl.MultiResults[0].Length; j++)
{
if (geta3dRsl.MultiResults[0].Parameters[j].ParameterName == "name"
&& geta3dRsl.MultiResults[0].Parameters[j].ParameterValue == "modified analysis 3d")
{
matchCount++;
}
if (geta3dRsl.MultiResults[0].Parameters[j].ParameterName == "comments"
&& geta3dRsl.MultiResults[0].Parameters[j].ParameterValue == "set with some modification")
{
matchCount++;
}
if (geta3dRsl.MultiResults[0].Parameters[j].ParameterName == "current"
&& geta3dRsl.MultiResults[0].Parameters[j].ParameterValue == "true")
{
matchCount++;
}
if (geta3dRsl.MultiResults[0].Parameters[j].ParameterName == "object_creation_date"
&& geta3dRsl.MultiResults[0].Parameters[j].ParameterValue == "2012-12-05T15:25:00+08:00")
{
matchCount++;
}
}
if (matchCount == 4)
{
cpSetA3d.Result = TestResult.Pass;
cpSetA3d.Outputs.AddParameter("Set Analysis3D", "Call setAnalysis3DInfo", seta3dRsl.ResultContent);
}
else
{
cpSetA3d.Result = TestResult.Fail;
cpSetA3d.Outputs.AddParameter("Set Analysis3D", "Call setAnalysis3DInfo", "The set value is not equal with get");
}
}
#endregion
SaveRound(r);
}
catch (Exception ex)
{
CheckPoint cp = new CheckPoint();
r.CheckPoints.Add(cp);
cp.Result = TestResult.Fail;
cp.Outputs.AddParameter("Exception thrown", "Exception Message", ex.Message);
SaveRound(r);
}
}
Output();
}
