public override ECFieldElement Subtract(ECFieldElement b)
{
uint[] z = Nat224.Create();
SecP224R1Field.Subtract(x, ((SecP224R1FieldElement)b).x, z);
return(new SecP224R1FieldElement(z));
}
public override ECFieldElement Multiply(ECFieldElement b)
{
uint[] z = Nat224.Create();
SecP224R1Field.Multiply(x, ((SecP224R1FieldElement)b).x, z);
return(new SecP224R1FieldElement(z));
}
public override ECFieldElement AddOne()
{
uint[] z = Nat224.Create();
SecP224R1Field.AddOne(x, z);
return(new SecP224R1FieldElement(z));
}
public override ECPoint Add(ECPoint b)
{
if (this.IsInfinity)
{
return(b);
}
if (b.IsInfinity)
{
return(this);
}
if (this == b)
{
return(Twice());
}
ECCurve curve = this.Curve;
SecP224R1FieldElement X1 = (SecP224R1FieldElement)this.RawXCoord, Y1 = (SecP224R1FieldElement)this.RawYCoord;
SecP224R1FieldElement X2 = (SecP224R1FieldElement)b.RawXCoord, Y2 = (SecP224R1FieldElement)b.RawYCoord;
SecP224R1FieldElement Z1 = (SecP224R1FieldElement)this.RawZCoords[0];
SecP224R1FieldElement Z2 = (SecP224R1FieldElement)b.RawZCoords[0];
uint[] tt1 = Nat224.CreateExt();
uint[] tt2 = Nat224.CreateExt();
uint[] t3 = Nat224.Create();
uint[] t4 = Nat224.Create();
bool Z1IsOne = Z1.IsOne;
uint[] U2, S2;
if (Z1IsOne)
{
U2 = X2.x;
S2 = Y2.x;
}
else
{
S2 = t3;
SecP224R1Field.Square(Z1.x, S2);
U2 = tt2;
SecP224R1Field.Multiply(S2, X2.x, U2);
SecP224R1Field.Multiply(S2, Z1.x, S2);
SecP224R1Field.Multiply(S2, Y2.x, S2);
}
bool Z2IsOne = Z2.IsOne;
uint[] U1, S1;
if (Z2IsOne)
{
U1 = X1.x;
S1 = Y1.x;
}
else
{
S1 = t4;
SecP224R1Field.Square(Z2.x, S1);
U1 = tt1;
SecP224R1Field.Multiply(S1, X1.x, U1);
SecP224R1Field.Multiply(S1, Z2.x, S1);
SecP224R1Field.Multiply(S1, Y1.x, S1);
}
uint[] H = Nat224.Create();
SecP224R1Field.Subtract(U1, U2, H);
uint[] R = tt2;
SecP224R1Field.Subtract(S1, S2, R);
// Check if b == this or b == -this
if (Nat224.IsZero(H))
{
if (Nat224.IsZero(R))
{
// this == b, i.e. this must be doubled
return(this.Twice());
}
// this == -b, i.e. the result is the point at infinity
return(curve.Infinity);
}
uint[] HSquared = t3;
SecP224R1Field.Square(H, HSquared);
uint[] G = Nat224.Create();
SecP224R1Field.Multiply(HSquared, H, G);
uint[] V = t3;
SecP224R1Field.Multiply(HSquared, U1, V);
Nat224.Mul(S1, G, tt1);
SecP224R1FieldElement X3 = new SecP224R1FieldElement(t4);
SecP224R1Field.Square(R, X3.x);
SecP224R1Field.Add(X3.x, G, X3.x);
SecP224R1Field.Subtract(X3.x, V, X3.x);
SecP224R1Field.Subtract(X3.x, V, X3.x);
SecP224R1FieldElement Y3 = new SecP224R1FieldElement(G);
SecP224R1Field.Subtract(V, X3.x, Y3.x);
Nat224.Mul(Y3.x, R, tt2);
SecP224R1Field.SubtractExt(tt2, tt1, tt2);
SecP224R1Field.Reduce(tt2, Y3.x);
SecP224R1FieldElement Z3 = new SecP224R1FieldElement(H);
if (!Z1IsOne)
{
SecP224R1Field.Multiply(Z3.x, Z1.x, Z3.x);
}
if (!Z2IsOne)
{
SecP224R1Field.Multiply(Z3.x, Z2.x, Z3.x);
}
ECFieldElement[] zs = new ECFieldElement[] { Z3 };
return(new SecP224R1Point(curve, X3, Y3, zs, IsCompressed));
}
public override ECPoint Twice()
{
if (this.IsInfinity)
{
return(this);
}
ECCurve curve = this.Curve;
SecP224R1FieldElement Y1 = (SecP224R1FieldElement)this.RawYCoord;
if (Y1.IsZero)
{
return(curve.Infinity);
}
SecP224R1FieldElement X1 = (SecP224R1FieldElement)this.RawXCoord, Z1 = (SecP224R1FieldElement)this.RawZCoords[0];
uint[] t1 = Nat224.Create();
uint[] t2 = Nat224.Create();
uint[] Y1Squared = Nat224.Create();
SecP224R1Field.Square(Y1.x, Y1Squared);
uint[] T = Nat224.Create();
SecP224R1Field.Square(Y1Squared, T);
bool Z1IsOne = Z1.IsOne;
uint[] Z1Squared = Z1.x;
if (!Z1IsOne)
{
Z1Squared = t2;
SecP224R1Field.Square(Z1.x, Z1Squared);
}
SecP224R1Field.Subtract(X1.x, Z1Squared, t1);
uint[] M = t2;
SecP224R1Field.Add(X1.x, Z1Squared, M);
SecP224R1Field.Multiply(M, t1, M);
SecP224R1Field.Twice(M, t1);
SecP224R1Field.Add(M, t1, M);
uint[] S = Y1Squared;
SecP224R1Field.Multiply(Y1Squared, X1.x, S);
uint c = Nat.ShiftUpBits(7, S, 2, 0);
SecP224R1Field.Reduce32(c, S);
c = Nat.ShiftUpBits(7, T, 3, 0, t1);
SecP224R1Field.Reduce32(c, t1);
SecP224R1FieldElement X3 = new SecP224R1FieldElement(T);
SecP224R1Field.Square(M, X3.x);
SecP224R1Field.Subtract(X3.x, S, X3.x);
SecP224R1Field.Subtract(X3.x, S, X3.x);
SecP224R1FieldElement Y3 = new SecP224R1FieldElement(S);
SecP224R1Field.Subtract(S, X3.x, Y3.x);
SecP224R1Field.Multiply(Y3.x, M, Y3.x);
SecP224R1Field.Subtract(Y3.x, t1, Y3.x);
SecP224R1FieldElement Z3 = new SecP224R1FieldElement(M);
SecP224R1Field.Twice(Y1.x, Z3.x);
if (!Z1IsOne)
{
SecP224R1Field.Multiply(Z3.x, Z1.x, Z3.x);
}
return(new SecP224R1Point(curve, X3, Y3, new ECFieldElement[] { Z3 }, IsCompressed));
}
public override ECPoint Add(ECPoint b)
{
if (base.IsInfinity)
{
return(b);
}
if (b.IsInfinity)
{
return(this);
}
if (this == b)
{
return(this.Twice());
}
ECCurve curve = this.Curve;
SecP224R1FieldElement secP224R1FieldElement = (SecP224R1FieldElement)base.RawXCoord;
SecP224R1FieldElement secP224R1FieldElement2 = (SecP224R1FieldElement)base.RawYCoord;
SecP224R1FieldElement secP224R1FieldElement3 = (SecP224R1FieldElement)b.RawXCoord;
SecP224R1FieldElement secP224R1FieldElement4 = (SecP224R1FieldElement)b.RawYCoord;
SecP224R1FieldElement secP224R1FieldElement5 = (SecP224R1FieldElement)base.RawZCoords[0];
SecP224R1FieldElement secP224R1FieldElement6 = (SecP224R1FieldElement)b.RawZCoords[0];
uint[] array = Nat224.CreateExt();
uint[] array2 = Nat224.Create();
uint[] array3 = Nat224.Create();
uint[] array4 = Nat224.Create();
bool isOne = secP224R1FieldElement5.IsOne;
uint[] array5;
uint[] array6;
if (isOne)
{
array5 = secP224R1FieldElement3.x;
array6 = secP224R1FieldElement4.x;
}
else
{
array6 = array3;
SecP224R1Field.Square(secP224R1FieldElement5.x, array6);
array5 = array2;
SecP224R1Field.Multiply(array6, secP224R1FieldElement3.x, array5);
SecP224R1Field.Multiply(array6, secP224R1FieldElement5.x, array6);
SecP224R1Field.Multiply(array6, secP224R1FieldElement4.x, array6);
}
bool isOne2 = secP224R1FieldElement6.IsOne;
uint[] array7;
uint[] array8;
if (isOne2)
{
array7 = secP224R1FieldElement.x;
array8 = secP224R1FieldElement2.x;
}
else
{
array8 = array4;
SecP224R1Field.Square(secP224R1FieldElement6.x, array8);
array7 = array;
SecP224R1Field.Multiply(array8, secP224R1FieldElement.x, array7);
SecP224R1Field.Multiply(array8, secP224R1FieldElement6.x, array8);
SecP224R1Field.Multiply(array8, secP224R1FieldElement2.x, array8);
}
uint[] array9 = Nat224.Create();
SecP224R1Field.Subtract(array7, array5, array9);
uint[] array10 = array2;
SecP224R1Field.Subtract(array8, array6, array10);
if (!Nat224.IsZero(array9))
{
uint[] array11 = array3;
SecP224R1Field.Square(array9, array11);
uint[] array12 = Nat224.Create();
SecP224R1Field.Multiply(array11, array9, array12);
uint[] array13 = array3;
SecP224R1Field.Multiply(array11, array7, array13);
SecP224R1Field.Negate(array12, array12);
Nat224.Mul(array8, array12, array);
uint x = Nat224.AddBothTo(array13, array13, array12);
SecP224R1Field.Reduce32(x, array12);
SecP224R1FieldElement secP224R1FieldElement7 = new SecP224R1FieldElement(array4);
SecP224R1Field.Square(array10, secP224R1FieldElement7.x);
SecP224R1Field.Subtract(secP224R1FieldElement7.x, array12, secP224R1FieldElement7.x);
SecP224R1FieldElement secP224R1FieldElement8 = new SecP224R1FieldElement(array12);
SecP224R1Field.Subtract(array13, secP224R1FieldElement7.x, secP224R1FieldElement8.x);
SecP224R1Field.MultiplyAddToExt(secP224R1FieldElement8.x, array10, array);
SecP224R1Field.Reduce(array, secP224R1FieldElement8.x);
SecP224R1FieldElement secP224R1FieldElement9 = new SecP224R1FieldElement(array9);
if (!isOne)
{
SecP224R1Field.Multiply(secP224R1FieldElement9.x, secP224R1FieldElement5.x, secP224R1FieldElement9.x);
}
if (!isOne2)
{
SecP224R1Field.Multiply(secP224R1FieldElement9.x, secP224R1FieldElement6.x, secP224R1FieldElement9.x);
}
ECFieldElement[] zs = new ECFieldElement[]
{
secP224R1FieldElement9
};
return(new SecP224R1Point(curve, secP224R1FieldElement7, secP224R1FieldElement8, zs, base.IsCompressed));
}
if (Nat224.IsZero(array10))
{
return(this.Twice());
}
return(curve.Infinity);
}
public override ECPoint Twice()
{
if (base.IsInfinity)
{
return(this);
}
ECCurve curve = this.Curve;
SecP224R1FieldElement secP224R1FieldElement = (SecP224R1FieldElement)base.RawYCoord;
if (secP224R1FieldElement.IsZero)
{
return(curve.Infinity);
}
SecP224R1FieldElement secP224R1FieldElement2 = (SecP224R1FieldElement)base.RawXCoord;
SecP224R1FieldElement secP224R1FieldElement3 = (SecP224R1FieldElement)base.RawZCoords[0];
uint[] array = Nat224.Create();
uint[] array2 = Nat224.Create();
uint[] array3 = Nat224.Create();
SecP224R1Field.Square(secP224R1FieldElement.x, array3);
uint[] array4 = Nat224.Create();
SecP224R1Field.Square(array3, array4);
bool isOne = secP224R1FieldElement3.IsOne;
uint[] array5 = secP224R1FieldElement3.x;
if (!isOne)
{
array5 = array2;
SecP224R1Field.Square(secP224R1FieldElement3.x, array5);
}
SecP224R1Field.Subtract(secP224R1FieldElement2.x, array5, array);
uint[] array6 = array2;
SecP224R1Field.Add(secP224R1FieldElement2.x, array5, array6);
SecP224R1Field.Multiply(array6, array, array6);
uint x = Nat224.AddBothTo(array6, array6, array6);
SecP224R1Field.Reduce32(x, array6);
uint[] array7 = array3;
SecP224R1Field.Multiply(array3, secP224R1FieldElement2.x, array7);
x = Nat.ShiftUpBits(7, array7, 2, 0u);
SecP224R1Field.Reduce32(x, array7);
x = Nat.ShiftUpBits(7, array4, 3, 0u, array);
SecP224R1Field.Reduce32(x, array);
SecP224R1FieldElement secP224R1FieldElement4 = new SecP224R1FieldElement(array4);
SecP224R1Field.Square(array6, secP224R1FieldElement4.x);
SecP224R1Field.Subtract(secP224R1FieldElement4.x, array7, secP224R1FieldElement4.x);
SecP224R1Field.Subtract(secP224R1FieldElement4.x, array7, secP224R1FieldElement4.x);
SecP224R1FieldElement secP224R1FieldElement5 = new SecP224R1FieldElement(array7);
SecP224R1Field.Subtract(array7, secP224R1FieldElement4.x, secP224R1FieldElement5.x);
SecP224R1Field.Multiply(secP224R1FieldElement5.x, array6, secP224R1FieldElement5.x);
SecP224R1Field.Subtract(secP224R1FieldElement5.x, array, secP224R1FieldElement5.x);
SecP224R1FieldElement secP224R1FieldElement6 = new SecP224R1FieldElement(array6);
SecP224R1Field.Twice(secP224R1FieldElement.x, secP224R1FieldElement6.x);
if (!isOne)
{
SecP224R1Field.Multiply(secP224R1FieldElement6.x, secP224R1FieldElement3.x, secP224R1FieldElement6.x);
}
return(new SecP224R1Point(curve, secP224R1FieldElement4, secP224R1FieldElement5, new ECFieldElement[]
{
secP224R1FieldElement6
}, base.IsCompressed));
}
