public void FindtheEdgeName(Session nxSession)
{
var getName = new GeometricNames();
for (int i = 0; i < 2; i++)
{
if (partOne[i].Length == 2)
{
CircularFace1 = partOne[i];
}
if (partTwo[i].Length == 2)
{
CircularFace2 = partTwo[i];
}
}
Point3d[] point1 = new Point3d[1];
point1[0] = toOne(CircularFace1, partOne);
Point3d[] point2 = new Point3d[1];
point2[0] = toOne(CircularFace2, partTwo);
var filedir = new NewNXfile();
filedir.partDir("RotationPart");
filedir.partDir("Body");
string fileDirect1 = "D:\\Macro\\A1post\\RotationPart.prt";
string consgeomname1 = getName.LoadName(nxSession, point1, filedir.partDir("RotationPart"), "Edge");
string fileDirect2 = "D:\\Macro\\A1post\\Body.prt";
string consgeomname2 = getName.LoadName(nxSession, point2, filedir.partDir("Body"), "Edge");
EdgeNames = new string[2];
EdgeNames[0] = consgeomname1;
EdgeNames[1] = consgeomname2;
}
public void FromTransCAD(Session nxSession)
{
Console.WriteLine("Number fo Const" + tAssem.Constraints.Count);
TransCAD.IStdAssemConstraint[] GetConstraints = new TransCAD.IStdAssemConstraint[tAssem.Constraints.Count];
TransCAD.StdAssemConstraintCoaxial ConstraintCoaxial;
TransCAD.StdAssemConstraintIncidence ConstraintIncidence;
string[] ConsPrtName = new string[tAssem.Constraints.Count];
string[] ConsGeoName = new string[tAssem.Constraints.Count];
string[] RefPrtName = new string[tAssem.Constraints.Count];
string[] RefGeoName = new string[tAssem.Constraints.Count];
for (int i = 0; i < tAssem.Constraints.Count; i++)
{
GetConstraints[i] = tAssem.Constraints.get_Constraint(i + 1);
if (GetConstraints[i].Name == "Coaxial")
{
ConstraintCoaxial = (TransCAD.StdAssemConstraintCoaxial)GetConstraints[i];
ConsPrtName[i] = ConstraintCoaxial.ConstrainedPart.Name;
if (ConstraintCoaxial.ConstrainedGeometry.ReferenceeName.Contains("#"))
{
string tempstr = ConstraintCoaxial.ConstrainedGeometry.ReferenceeName;
Console.WriteLine("Constains #");
int z = tempstr.IndexOf('#');
if (z >= 0)
{
tempstr = tempstr.Substring(z + 1);
}
ConsGeoName[i] = tempstr;
}
else
{
ConsGeoName[i] = ConstraintCoaxial.ConstrainedGeometry.ReferenceeName;
}
RefPrtName[i] = ConstraintCoaxial.ReferencePart.Name;
if (ConstraintCoaxial.ReferenceGeometry.ReferenceeName.Contains("#"))
{
string tempstr = ConstraintCoaxial.ReferenceGeometry.ReferenceeName;
Console.WriteLine("Constains #");
int z = tempstr.IndexOf('#');
if (z >= 0)
{
tempstr = tempstr.Substring(z + 1);
}
RefGeoName[i] = tempstr;
}
else
{
RefGeoName[i] = ConstraintCoaxial.ReferenceGeometry.ReferenceeName;
}
}
else if (GetConstraints[i].Name == "Incidence")
{
ConstraintIncidence = (TransCAD.StdAssemConstraintIncidence)GetConstraints[i];
if (ConstraintIncidence.ConstrainedGeometry.ReferenceeName.Contains("#"))
{
Console.WriteLine("Constains #");
}
ConsPrtName[i] = ConstraintIncidence.ConstrainedPart.Name;
if (ConstraintIncidence.ReferenceGeometry.ReferenceeName.Contains("#"))
{
Console.WriteLine("Constains #");
}
ConsGeoName[i] = ConstraintIncidence.ConstrainedGeometry.ReferenceeName;
RefPrtName[i] = ConstraintIncidence.ReferencePart.Name;
RefGeoName[i] = ConstraintIncidence.ReferenceGeometry.ReferenceeName;
}
Console.WriteLine("Constraints Part" + i + " Name:: " + ConsPrtName[i]);
Console.WriteLine("Constraints Geometry" + i + "Geometry:: " + ConsGeoName[i]);
Console.WriteLine("Reference Part" + i + " Name:: " + RefPrtName[i]);
Console.WriteLine("Reference Geometry" + i + "Geometry:: " + RefGeoName[i]);
}
int p = 0, q = 0;
ConstNames1 = new string[2];
ConstNames2 = new string[2];
constNamesTemp = new string[2];
ConsNames = new List <string>();
PartNamestoNX = new List <string>();
for (int i = 0; i < 2; i++)
{
var filedir = new NewNXfile();
string constraintName = GetConstraints[i].Name;
constNamesTemp[i] = constraintName;
string partnam = tcad_PartList[i].Name;
double ox, oy, oz, xx, xy, xz, yx, yy, yz;
tcad_PartList[i].GetPlacement(out ox, out oy, out oz, out xx, out xy, out xz, out yx, out yy, out yz);
Point3d tcad_Position = new Point3d(ox, oy, oz);
Point3d tcad_X_Orientation = new Point3d(xx, xy, xz);
Point3d tcad_Y_Orientation = new Point3d(yx, yy, yz);
var getName = new GeometricNames();
Console.WriteLine(partnam);
int facecount = tcad_PartList[i].Solid.Faces.Count;
string[] partname = new string[tcad_PartList[i].Solid.Faces.Count + 1];
for (int i1 = 1; i1 <= facecount; i1++)
{
partname[i1] = tcad_PartList[i].Solid.Faces[i1].Name;
}
string[] tempname = partname;
for (int l = 0; l < 2; l++)
{
for (int k = 1; k < facecount + 1; k++)
{
name = tcad_PartList[i].Solid.Faces[k].Name;
if ((ConsGeoName[l].Contains(name)) & (p <= 1))
{
Console.WriteLine("The maching face in " + partnam + " is " + k + " for constraint " + l);
Console.WriteLine(name);
int numVertex = tcad_PartList[i].Solid.Faces[k].Vertices.Count;
Console.WriteLine("Number of Vertices in Constrained Geometry" + numVertex);
TcadCV1 = new Point3d[numVertex];
TcadCV01 = new Point3d[numVertex];
int n = 0;
{
Console.WriteLine("Constrainted Geometry is :::");
for (int m = 1; m < numVertex + 1; m++)
{
for (; n < numVertex;)
{
Point3d tempTV;
TransCAD.Vertex tv = tcad_PartList[i].Solid.Faces[k].Vertices[m];
Console.WriteLine(" (" + tv.X + "," + tv.Y + "," + tv.z + ") ");
tempTV.X = tv.X;
tempTV.Y = tv.Y;
tempTV.Z = tv.z;
TcadCV01[n] = tempTV;
TcadCV1[n] = OrientedTranslated(tempTV, tcad_Position, tcad_X_Orientation, tcad_Y_Orientation);
//TcadCV1[n].X = tv.X;
//TcadCV1[n].Y = tv.Y;
//TcadCV1[n].Z = tv.z;
n = n + 1;
break;
}
}
}
partOne.Add(p, TcadCV1);
string fileDirect = "D:\\Macro\\A1post\\RotationPart.prt";
string consgeomname1 = getName.LoadName(nxSession, TcadCV01, filedir.partDir(partnam), "Face");
//ConstNames1[p] = consgeomname1;
p = p + 1;
ConsNames.Add(consgeomname1);
PartNamestoNX.Add(partnam);
break;
}
if (RefGeoName[l].Contains(name))
{
Console.WriteLine("The matching face in " + partnam + " is " + k + " for constraint " + l);
Console.WriteLine(name);
Console.WriteLine("Reference Geometry is :::");
int numVertex = tcad_PartList[i].Solid.Faces[k].Vertices.Count;
TcadCV2 = new Point3d[numVertex];
TcadCV02 = new Point3d[numVertex];
int n = 0;
Console.WriteLine("Number of Vertices in Reference Geometry" + numVertex);
{
for (int m = 1; m < numVertex + 1; m++)
{
for (; n < numVertex;)
{
Point3d tempTV;
TransCAD.Vertex tv = tcad_PartList[i].Solid.Faces[k].Vertices[m];
Console.WriteLine(" (" + tv.X + "," + tv.Y + "," + tv.z + ") ");
tempTV.X = tv.X;
tempTV.Y = tv.Y;
tempTV.Z = tv.z;
TcadCV02[n] = tempTV;
TcadCV2[n] = OrientedTranslated(tempTV, tcad_Position, tcad_X_Orientation, tcad_Y_Orientation);
//TcadCV2[n].X = tv.X;
//TcadCV2[n].Y = tv.Y;
//TcadCV2[n].Z = tv.z;
n = n + 1;
break;
}
}
}
partTwo.Add(q, TcadCV2);
string fileDirect1 = "D:\\Macro\\A1post\\Body.prt";
string consgeomname2 = getName.LoadName(nxSession, TcadCV02, filedir.partDir(partnam), "Face");
Console.WriteLine("Value of tCADlength " + TcadCV2.Length);
Console.WriteLine("Value of P:::::" + p);
//ConstNames2[q] = consgeomname2;
q = q + 1;
ConsNames.Add(consgeomname2);
PartNamestoNX.Add(partnam);
break;
}
}
}
}
p = 0;
q = 0;
for (int z1 = 0; z1 < ConsNames.Count; z1++)
{
for (int z2 = 0; z2 < partname.Length; z2++)
{
if (PartNamestoNX[z1].Contains(partname[z2]))
{
ConstNames1[p] = ConsNames[z1];
p = p + 1;
break;
}
else
{
ConstNames2[q] = ConsNames[z1];
q = q + 1;
break;
}
}
}
Console.WriteLine("");
}
