public FrameDebugBuffer(int width, int height)
{
buffer = new FrameDebugData[width][];
visualization = new float4[width][];
for (int i = 0; i < width; i++)
{
buffer[i] = new FrameDebugData[height];
visualization[i] = new float4[height];
for (int j = 0; j < height; j++)
{
buffer[i][j] = new FrameDebugData();
}
}
this.rt_width = width;
this.rt_height = height;
}
public void drawTriangles(IndexBuffer3D indexBuffer, int firstIndex = 0, int numTriangles = -1)
{
if (currentVertexBuffer == null)
{
throw new InvalidOperationException("VertexBuffer无效");
}
if (current_program3D == null)
{
throw new InvalidOperationException("尚未设置着色器");
}
if (!current_program3D.Validate())
{
throw new InvalidOperationException("着色器校验失败");
}
if (numTriangles == -1)
{
numTriangles = (indexBuffer.data.Count - firstIndex) / 3;
}
if (rasters == null || rasters.Length < currentRenderTarget.renderTarget.rt_width * currentRenderTarget.renderTarget.rt_height)
{
rasters = new Rasterizer.Raster[currentRenderTarget.renderTarget.rt_width * currentRenderTarget.renderTarget.rt_height];
for (int i = 0; i < rasters.Length; i++)
{
rasters[i] = new Rasterizer.Raster();
}
}
current_program3D.vertexShader.constants = programConstants;
current_program3D.fragementShader.constants = programConstants;
v2f[] v2fs = new v2f[currentVertexBuffer.vertices.Count];
#region 计算所有顶点
var vs = current_program3D.vertexShader;
for (int i = 0; i < v2fs.Length; i++)
{
vs.appdata = currentVertexBuffer.vertices[i];
v2fs[i] = vs.Execute();
}
#endregion
for (int i = 0; i < numTriangles; i++)
{
if (firstIndex + i * 3 > indexBuffer.data.Count - 3)
{
throw new ArgumentException("index数量不足");
}
uint idx1 = indexBuffer.data[firstIndex + i * 3];
uint idx2 = indexBuffer.data[firstIndex + i * 3 + 1];
uint idx3 = indexBuffer.data[firstIndex + i * 3 + 2];
#region 顶点着色器运算
v2f v1;
v2f v2;
v2f v3;
//var vs = current_program3D.vertexShader;
{
//vs.appdata = currentVertexBuffer.vertices[(int)idx1];
//v1=vs.Execute();
v1 = v2fs[(int)idx1];
}
{
//vs.appdata = currentVertexBuffer.vertices[(int)idx2];
//v2=vs.Execute();
v2 = v2fs[(int)idx2];
}
{
//vs.appdata = currentVertexBuffer.vertices[(int)idx3];
//v3=vs.Execute();
v3 = v2fs[(int)idx3];
}
#endregion
#region clip and cull
{
float3 xyz1 = v1.SV_POSITION.xyz / v1.SV_POSITION.w;
float3 xyz2 = v2.SV_POSITION.xyz / v2.SV_POSITION.w;
float3 xyz3 = v3.SV_POSITION.xyz / v3.SV_POSITION.w;
#region 视景体外裁剪
{
if ((xyz1.z > 1 || xyz1.z < 0 || xyz1.x < -1 || xyz1.x > 1 || xyz1.y < -1 || xyz1.y > 1 || double.IsNaN(xyz1.x) || double.IsNaN(xyz1.y) || double.IsNaN(xyz1.z))
&&
(xyz2.z > 1 || xyz2.z < 0 || xyz2.x < -1 || xyz2.x > 1 || xyz2.y < -1 || xyz2.y > 1 || double.IsNaN(xyz2.x) || double.IsNaN(xyz2.y) || double.IsNaN(xyz2.z))
&&
(xyz3.z > 1 || xyz3.z < 0 || xyz3.x < -1 || xyz3.x > 1 || xyz3.y < -1 || xyz3.y > 1 || double.IsNaN(xyz3.x) || double.IsNaN(xyz3.y) || double.IsNaN(xyz3.z))
)
{
continue;
}
}
#endregion
//背面剔除
{
float area = Rasterizer.TriangleDoubleArea(xyz1.xy, xyz2.xy, xyz3.xy);
switch (_culling)
{
case Context3DTriangleFace.BACK:
if (area < 0)
{
continue;
}
break;
case Context3DTriangleFace.FRONT:
if (area > 0)
{
continue;
}
break;
case Context3DTriangleFace.FRONT_AND_BACK:
continue;
case Context3DTriangleFace.NONE:
break;
default:
continue;
}
}
}
#endregion
int totalraises;
Rasterizer.Triangle(currentRenderTarget.renderTarget,
v1, v2, v3
, rasters
, out totalraises
);
var pixels = currentRenderTarget.renderTarget.getRealPixels();
for (int j = 0; j < totalraises; j++)
{
var r = rasters[j];
if (r.vsout.SV_POSITION.z < -1.192092896e-07F || r.vsout.SV_POSITION.z > r.vsout.SV_POSITION.w || double.IsNaN(r.vsout.SV_POSITION.z))
{
//在远近裁剪面外，去掉
continue;
}
r.isclippass = true;
}
var zBuffer = currentRenderTarget.zBuffer;
var currentRenderBuffer = currentRenderTarget.renderTarget;
for (int j = 0; j < totalraises; j += 4)
{
var r0 = rasters[j];
var r1 = rasters[j + 1];
var r2 = rasters[j + 2];
var r3 = rasters[j + 3];
quadFragementUnit.setQuadUnit(this, current_program3D.fragementShader, r0.vsout, r1.vsout, r2.vsout, r3.vsout);
for (int k = 0; k < 4; k++)
{
var r = rasters[j + k];
if (r.isclippass && r.rasterize)
{
var unit = quadFragementUnit[k];
debugger.FrameDebugData debugData = null;
if (DebugBuffer != null && current_program3D.fragementShader.HasDebug)
{
debugData = DebugBuffer.buffer[r.x][r.y];
debugData.inputdata = unit.input;
debugData.i = r.x;
debugData.j = r.y;
debugData.Ready();
}
float4 oc = pixels[r.x][r.y];
current_program3D.fragementShader.Run(unit, debugData);
float4 color = unit.output; color.a = Mathf.clamp01(color.a);
if (unit.isdiscard)
{
continue;
}
#region 深度检测处理
{
//float depth = r.vsout.SV_POSITION.z / r.vsout.SV_POSITION.w;
ushort depth = zBuffer.Convert(r.vsout.SV_POSITION.z / r.vsout.SV_POSITION.w);
//读出zBuffer
//var buffer = zBuffer.buffer;
var di = (int)(r.x * 1.0f * zBuffer.width / currentRenderBuffer.rt_width);
var dj = (int)(r.y * 1.0f * zBuffer.height / currentRenderBuffer.rt_height);
//float depth_buffer = buffer[di][dj];
ushort depth_buffer = zBuffer[di, dj];
#region 深度检测
switch (_depthtest_passCompareMode)
{
case Context3DCompareMode.ALWAYS:
break;
case Context3DCompareMode.EQUAL:
if (!(depth == depth_buffer))
{
continue;
}
break;
case Context3DCompareMode.GREATER:
if (!(depth > depth_buffer))
{
continue;
}
break;
case Context3DCompareMode.GREATER_EQUAL:
if (!(depth >= depth_buffer))
{
continue;
}
break;
case Context3DCompareMode.LESS:
if (!(depth < depth_buffer))
{
continue;
}
break;
case Context3DCompareMode.LESS_EQUAL:
if (!(depth <= depth_buffer))
{
continue;
}
break;
case Context3DCompareMode.NEVER:
//永远测试不通过
continue;
case Context3DCompareMode.NOT_EQUAL:
if (!(depth != depth_buffer))
{
continue;
}
break;
default:
continue;
}
#endregion
//深度测试通过
if (_depthtest_depthMask) //需要写深度
{
//buffer[di][dj] = depth;
zBuffer.WriteDepth(di, dj, depth);
}
}
#endregion
//***Blend***
float4 final = oc * (1 - color.a) + color * color.a;
pixels[r.x][r.y] = final;
}
}
}
#region 线框
//var linepos1 = v1.SV_POSITION / v1.SV_POSITION.w;
//var linepos2 = v2.SV_POSITION / v2.SV_POSITION.w;
//var linepos3 = v3.SV_POSITION / v3.SV_POSITION.w;
//Rasterizer.Line(currentRenderBuffer,
// linepos1.xy, linepos2.xy, new float4(0, 0, 0, 1));
//Rasterizer.Line(currentRenderBuffer,
// linepos2.xy, linepos3.xy, new float4(0, 0, 0, 1));
//Rasterizer.Line(currentRenderBuffer,
// linepos3.xy, linepos1.xy, new float4(0, 0, 0, 1));
#endregion
#region 显示经着色器计算后的法线和切线
{
//DrawDirLine(currentRenderBuffer, 0.2f, v1.worldPos, v1.worldNormal, new float4(0, 0, 1, 1));
//DrawDirLine(currentRenderBuffer, 0.2f, v1.worldPos, v1.worldTangent, new float4(1, 1, 0, 1));
}
#endregion
}
}
internal void Run(FragementUnit unit, debugger.FrameDebugData debugData)
{
this.unit = unit; this.debugData = debugData;
unit.output = Execute(unit.input);
this.unit = null; this.debugData = null;
}
