/// <summary>
/// Returns an invisible BoundingBox that defines a container in which
/// all shapes fall within its boundary.
/// </summary>
/// <param name="page">Page with shapes to get a BoundingBox around.</param>
/// <returns>A BoundingBox.</returns>
public static BoundingBox getBoundingBox(Visio.Page page)
{
BoundingBox box = new BoundingBox(0.0, 0.0, 0.0, 0.0);
// Get all shapes on the page
Visio.Shapes allShapes = page.Shapes;
// Iterate through all Shapes, get the most upper left and most lower
// right Shape and use its coordinates to define the BoundingBox
int index = 0;
foreach (Visio.Shape s in allShapes)
{
// Retrieves the PinX, PinY Cell values that holds the Shape's center coordinates
double shapeX = s.Cells["PinX"].Result["inches"];
double shapeY = s.Cells["PinY"].Result["inches"];
// Get the shape's Width & Height and adds half of its value to the BoundingBox
// to include the whole Shape in the Box (since we are using the Shape's CENTER)
double halfShapeWidth = s.Cells["Width"].Result["inches"] / 2;
double halfShapeHeight = s.Cells["Height"].Result["inches"] / 2;
// if it's the first shape, automatically set a BoundingBox around it as a starting point.
if (index == 0)
{
box.UpperLeftX = shapeX - halfShapeWidth;
box.LowerRightX = shapeX + halfShapeWidth;
box.UpperLeftY = shapeY + halfShapeHeight;
box.LowerRightY = shapeY - halfShapeHeight;
}
else
{
if (shapeX < box.UpperLeftX)
{
// this shape is more left than the current BoundingBox left boundary.
box.UpperLeftX = shapeX - halfShapeWidth;
}
else if (shapeX > box.LowerRightX)
{
// this shape is more right than the current BoundingBox right boundary.
box.LowerRightX = shapeX + halfShapeWidth;
}
if (shapeY > box.UpperLeftY)
{
// this shape is higher than the current BoundingBox top boundary.
box.UpperLeftY = shapeY + halfShapeHeight;
}
else if (shapeY < box.LowerRightY)
{
// this shape is lower than the current BoundingBox bottom boundary.
box.LowerRightY = shapeY - halfShapeHeight;
}
}
++index;
}
return(box);
}
public void violationValidator(Visio.Shapes shapes, Visio.Document document, Visio.ValidationRuleSet violationValidatorRuleSet)
{
foreach(Visio.Shape shape in shapes)
{
if(shape.Master.Name == "Violation")
{
var outgoingShapes = new List<Visio.Shape>();
Array outgoing1Dshapes = shape.GluedShapes(Visio.VisGluedShapesFlags.visGluedShapesOutgoing1D, "");
if(outgoing1Dshapes.Length == 0)
{
// Issue Handling: Violation Event muss einen ausgehenden DangerFlow haben. (shape weil event markiert werden soll)
//customRule2.AddIssue(shape.ContainingPage, shape);
violationValidatorRuleSet.Rules.get_ItemFromID(2).AddIssue(shape.ContainingPage, shape);
continue;
}
foreach (Object element in outgoing1Dshapes)
{
outgoingShapes.Add(shapes.get_ItemFromID((int)element));
}
foreach(Visio.Shape element in outgoingShapes)
{
if(element.Master.Name != "DangerFlow")
{
//Issue Handling: Outgoing Flow ist kein DangerFlow (element weil Flow markiert werden soll)
//customRule1.AddIssue(shape.ContainingPage, element);
violationValidatorRuleSet.Rules.get_ItemFromID(1).AddIssue(shape.ContainingPage, element);
}
}
}
}
}
public static IEnumerable <IVisio.Shape> AsEnumerable(this IVisio.Shapes shapes)
{
int count = shapes.Count;
for (int i = 0; i < count; i++)
{
yield return(shapes[i + 1]);
}
}
public static List <IVisio.Shape> GetShapesFromIDs(IVisio.Shapes shapes, IList <short> shapeids)
{
var shape_objs = new List <IVisio.Shape>(shapeids.Count);
foreach (short shapeid in shapeids)
{
var shape = shapes.ItemFromID16[shapeid];
shape_objs.Add(shape);
}
return(shape_objs);
}
/// <summary>
/// Returns all the Shapes currently on the given Page.
/// </summary>
/// <param name="page">Page with the Shapes.</param>
/// <returns>List of Shapes.</returns>
public static List <Visio.Shape> getAllShapesOnPage(Visio.Page page)
{
List <Visio.Shape> shapesList = new List <Visio.Shape>();
Visio.Shapes shapes = page.Shapes;
foreach (Visio.Shape s in shapes)
{
shapesList.Add(s);
}
return(shapesList);
}
public String[] getShapeNames(Visio.Shapes shapes) //https://docs.microsoft.com/de-de/office/vba/api/visio.shapes.item
{
Visio.Shapes vsoShapes = shapes;
int shapeCount = vsoShapes.Count;
string[] names = new string[shapeCount];
if (shapeCount > 0)
{
for (int i = 1; i < shapeCount; i++)
{
names[i - 1] = vsoShapes.get_ItemU(i).Name;
}
}
return names;
}
public void executeThisAddIn(Visio.Document doc)
{
// TODO: executeThisAddIn wird beim Öffnen eines Dokuments 3 Mal ausgeführt. Temporary fix mit Boolean insertedRuleSet
if (insertedRuleSet == false)
{
insertRuleSets(doc);
insertedRuleSet = true;
//Reihenfolge an Regeln nicht verändern!
Visio.Shapes vsoShapes = getShapesFromPage();
//When Microsoft Visio performs validation, it fires a RuleSetValidated event for every rule set that it processes, even if a rule set is empty.
Application.RuleSetValidated += new Visio.EApplication_RuleSetValidatedEventHandler(HandleRuleSetValidatedEvent);
}
}
public static void printProperties(Visio.Shapes shapes)
{
string res = "";
// Look at each shape in the collection.
foreach (Visio.Shape shape in shapes)
{
// Use this index to look at each row in the properties
// section.
short iRow = (short)Visio.VisRowIndices.visRowFirst;
// While there are stil rows to look at.
while (shape.get_CellsSRCExists(
(short)Visio.VisSectionIndices.visSectionProp,
iRow,
(short)Visio.VisCellIndices.visCustPropsValue,
(short)0) != 0)
{
// Get the label and value of the current property.
string label = shape.get_CellsSRC(
(short)Visio.VisSectionIndices.visSectionProp,
iRow,
(short)Visio.VisCellIndices.visCustPropsLabel
).get_ResultStr(Visio.VisUnitCodes.visNoCast);
string value = shape.get_CellsSRC(
(short)Visio.VisSectionIndices.visSectionProp,
iRow,
(short)Visio.VisCellIndices.visCustPropsValue
).get_ResultStr(Visio.VisUnitCodes.visNoCast);
// Print the results.
res += (string.Format(
"Shape={0} Label={1} Value={2}\r\n",
shape.Name, label, value));
// Move to the next row in the properties section.
iRow++;
}
// Now look at child shapes in the collection.
if (shape.Master == null && shape.Shapes.Count > 0)
{
printProperties(shape.Shapes);
}
}
MessageBox.Show(res);
}
/// <summary>
/// Converts a Transform-Center Diagram to an Architectural Chart.
/// </summary>
private void transformToArchChart(Visio.Page inputPage, Visio.Page outputPage, Visio.Shape root)
{
// Separates a Transform-Center into its different components
// ie. a Process tree, an Input tree, and an Output tree. To get all these
// components, start at the Root and retrieve all Shapes connected to Root.
// Gets all shapes that are connected to the root shape through a connector
// (such as through a 1-D Dynamic Connector)
List <int> shapeIDs = new List <int>(
(int[])root.ConnectedShapes(Visio.VisConnectedShapesFlags.visConnectedShapesAllNodes, ""));
// Gets all shapes that are glued to the root shape (as in, it is connected
// directly to the root shape.
shapeIDs.AddRange(
(int[])root.GluedShapes(Visio.VisGluedShapesFlags.visGluedShapesAll1D, ""));
List <Visio.Shape> inputs = new List <Visio.Shape>();
List <Visio.Shape> process = new List <Visio.Shape>();
List <Visio.Shape> outputs = new List <Visio.Shape>();
Visio.Shapes allShapes = inputPage.Shapes;
foreach (int id in shapeIDs)
{
Visio.Shape toShape = allShapes.get_ItemFromID(id);
if (toShape.Master.Name == CaseTypes.TRANSFORM_PROCESS_MASTER)
{
process.Add(toShape);
}
else if (toShape.Master.Name == CaseTypes.TRANSFORM_INPUT_MASTER)
{
inputs.Add(toShape);
}
else if (toShape.Master.Name == CaseTypes.TRANSFORM_OUTPUT_MASTER)
{
outputs.Add(toShape);
}
}
// Draws the Architecture Chart on the Architecture Chart Page.
outputChart(outputPage, root, inputs, process, outputs);
}
public void CIAValidator(Visio.Shapes shapes, Visio.Document document, Visio.ValidationRuleSet ciaValidatorRuleSet)
{
var informationSecurityShapes = new List<String>();
informationSecurityShapes.Add("Confidentiality");
informationSecurityShapes.Add("Integrity");
informationSecurityShapes.Add("Availability");
var informationShapes = new List<String>();
informationShapes.Add("Datenobjekt");
informationShapes.Add("Nachricht");
informationShapes.Add("Datenspeicher");
foreach (Visio.Shape shape in shapes)
{
if (informationSecurityShapes.Contains(shape.Master.Name))
{
if(shape.Master.Name == "Availability")
{
Boolean gluedToNonDataObject = false;
var gluedShapes1 = new List<Visio.Shape>();
Array allGlued1Shapes = shape.GluedShapes(Visio.VisGluedShapesFlags.visGluedShapesAll2D, "");
foreach (Object element in allGlued1Shapes)
{
gluedShapes1.Add(shapes.get_ItemFromID((int)element));
}
foreach (Visio.Shape element in gluedShapes1)
{
if (!informationShapes.Contains(element.Master.Name))
{
gluedToNonDataObject = true;
}
}
if (gluedToNonDataObject == true)
{
var outgoingFlows = new List<Visio.Shape>();
Array outgoing1D = shape.GluedShapes(Visio.VisGluedShapesFlags.visGluedShapesOutgoing1D, "");
foreach (Object element in outgoing1D)
{
outgoingFlows.Add(shapes.get_ItemFromID((int)element));
}
foreach(Visio.Shape x in outgoingFlows)
{
if(x.Master.Name != "Nachrichtenfluss")
{
//Issue Handling: Ausgehender Fluss muss Nachrichtenfluss sein
//customRule1.AddIssue(shape.ContainingPage, shape);
ciaValidatorRuleSet.Rules[1].AddIssue(shape.ContainingPage, shape);
}
}
if (!outgoingFlows.Any())
{
//Issue Handling: Braucht ausgehenden Nachrichtenfluss
//customRule1.AddIssue(shape.ContainingPage, shape);
ciaValidatorRuleSet.Rules[1].AddIssue(shape.ContainingPage, shape);
}
return;
}
}
var gluedShapes = new List<Visio.Shape>();
Array allGluedShapes = shape.GluedShapes(Visio.VisGluedShapesFlags.visGluedShapesAll2D, "");
if(allGluedShapes.Length == 0)
{
// Issue Handling: Data-Security Element muss an ein Data-Shape geklebt werden.
ciaValidatorRuleSet.Rules[2].AddIssue(shape.ContainingPage, shape);
continue;
}
foreach (Object element in allGluedShapes)
{
gluedShapes.Add(shapes.get_ItemFromID((int)element));
}
foreach(Visio.Shape element in gluedShapes)
{
if (!informationShapes.Contains(element.Master.Name))
{
//Issue Handing: Information Security Shape muss an ein Daten-Shapen geklebt werden.
//customRule2.AddIssue(shape.ContainingPage, shape);
ciaValidatorRuleSet.Rules[2].AddIssue(shape.ContainingPage, shape);
}
}
}
}
}
public static List <IVisio.Shape> ToList(this IVisio.Shapes shapes)
{
return(ExtensionHelpers.ToList(() => shapes.Count, i => shapes[i + 1]));
}
public static IEnumerable <IVisio.Shape> ToEnumerable(this IVisio.Shapes shapes)
{
return(ExtensionHelpers.ToEnumerable(() => shapes.Count, i => shapes[i + 1]));
}
public RenderContext(IVisio.Page visio_page)
{
this._id_to_shape = new Dictionary <short, IVisio.Shape>();
this.VisioPage = visio_page;
this._pageshapes = visio_page.Shapes;
}
public static IEnumerable <IVisio.Shape> ToEnumerable(this IVisio.Shapes shapes)
{
return(Shapes.ShapeHelper.ToEnumerable(shapes));
}
public static IEnumerable <IVisio.Shape> ToEnumerable(this IVisio.Shapes shapes)
{
return(VisioAutomation.Internal.Extensions.ExtensionHelpers.ToEnumerable(() => shapes.Count, i => shapes[i + 1]));
}
public static List <IVisio.Shape> ToList(this IVisio.Shapes shapes)
{
return(VisioAutomation.Internal.Extensions.ExtensionHelpers.ToList(() => shapes.Count, i => shapes[i + 1]));
}
public void EntrypointValidator(Visio.Shapes shapes, Visio.Document document, Visio.ValidationRuleSet entrypointValidatorRuleSet)
{
// Laufe über alle Shapes des Dokuments
foreach(Visio.Shape shape in shapes)
{
//prüfe zunächst ob alle PerimeterBarriers in einem Container ist
if (shape.Master.Name == "PerimeterBarrier")
{
if (shape.MemberOfContainers.Length == 0)
{
// Issue Handling: PerimeterBarrier außerhalb aller Container
entrypointValidatorRuleSet.Rules[5].AddIssue(shape.ContainingPage, shape);
}
}
if (shape.Master.Name == "EntryPoint") //Für jeden EntryPoint im Dokument
{
// Listen für auf den EntryPoint folgende Shapes
var out1DShapeList = new List<Visio.Shape>();
var out2DShapeList = new List<Visio.Shape>();
// Listen für dem EntryPoint vorhergehenden Shapes
var in1DShapeList = new List<Visio.Shape>();
var in2DShapeList = new List<Visio.Shape>();
// Liste für Container Objecte
var containerShapes = new List<Visio.Shape>();
var containerMembers = new List<Visio.Shape>();
Boolean inGroup = false;
//Es wird davon ausgegangen, dass EntryPoint immer mit nur einem outgoing Sequenzfluss (bzw. D.F.) verbunden ist
//zusätzlich kann ein EntryPoint aber noch mit einem MessageFlow verbunden sein
//prüfe alle outgoing 1D shapes (Pfeile: Sequenzfluss, DangerFlow, MSgFlow)
Array out1DArray = shape.GluedShapes(Visio.VisGluedShapesFlags.visGluedShapesOutgoing1D, "");
if(out1DArray.Length == 0)
{
// Issue Handling: EntryPoint has to have an outgoing Flow
//customRule1.AddIssue(shape.ContainingPage, shape);
entrypointValidatorRuleSet.Rules[1].AddIssue(shape.ContainingPage, shape);
continue;
}
//Array in Liste mit den out 1D shapes casten
foreach (Object element in out1DArray)
{
out1DShapeList.Add(shapes.get_ItemFromID((int)element));
}
// Über alle outgoing Flows laufen
foreach(Visio.Shape outFlow in out1DShapeList)
{
if(outFlow.Master.Name == "DangerFlow" || outFlow.Master.Name == "Sequenzfluss")
{
Array out2DArray = outFlow.GluedShapes(Visio.VisGluedShapesFlags.visGluedShapesOutgoing2D, ""); //an den Fluss gebundenen outgoing 2D shapes
//Es wird davon ausgegangen, dass nur ein outgoing 2D Shape an einen Flow gebunden ist
if (out2DArray.Length == 0) //wenn kein zweites Element an den Fluss gebunden ist
{
// Issue Handling: Sequenzfluss braucht vorangehendes Element
entrypointValidatorRuleSet.Rules[6].AddIssue(outFlow.ContainingPage, outFlow);
}
foreach (Object element in out2DArray)
{
out2DShapeList.Add(shapes.get_ItemFromID((int)element)); // in Liste mit den out 2D shapes casten
}
foreach(Visio.Shape out2DShape in out2DShapeList) //laufe über alle out 2D shapes (nur eins)
{
//ist das out2DShape Teil eines Gruppen-containers
Array containerIDs = out2DShape.MemberOfContainers; //Holt alle Container in denen das 2D Shape enthalten ist
foreach (Object element in containerIDs)
{
containerShapes.Add(shapes.get_ItemFromID((int)element)); //Castet Container IDs in Liste mit Container Objekten
}
foreach(Visio.Shape container in containerShapes)
{
//true wenn 2D shape Teil eines Gruppen container ist --> Issue Handling wenn 2D shape nicht Teil einer Gruppe ist (alle zugeordneten Container dürfen keine Gruppe sein)
if(container.Master.NameU == "Group")
{
inGroup = true;
//hole alle Shapes die Teil des Gruppen Containers sind
Array memberShapes = container.ContainerProperties.GetMemberShapes(0); // Array "with all shape types and including items in nested containers"
foreach(Object element in memberShapes) //kann nicht leer sein, da mind. out2DShape enthalten sein muss
{
containerMembers.Add(shapes.get_ItemFromID((int)element)); //in Liste mit allen Shapes auf dem Container casten
}
foreach(Visio.Shape memberShape in containerMembers) //prüfe alle Mitglieder des Gruppen containers
{
//wenn PreimeterBarrier enthalten -> Sicherheitsbereich -> Identifikation vor EntryPoint
if (memberShape.Master.Name == "PerimeterBarrier")
{
Array in1DArray = shape.GluedShapes(Visio.VisGluedShapesFlags.visGluedShapesIncoming1D,"");
if(in1DArray.Length == 0)
{
// Issue Handling: EntryPoint benötigt einen Incoming Flow; Muss nach einem Identifikationselement stehen
//customRule2.AddIssue(shape.ContainingPage, shape);
entrypointValidatorRuleSet.Rules[2].AddIssue(shape.ContainingPage, shape);
}
// In Liste mit in 1D Shapes casten
foreach(Object element in in1DArray)
{
in1DShapeList.Add(shapes.get_ItemFromID((int)element)); //es wird davon ausgegangen dass nur ein Element enthalten ist
}
//Laufe über alle incoming Flows (nur einer)
foreach(Visio.Shape inFlow in in1DShapeList)
{
Array in2DArray = inFlow.GluedShapes(Visio.VisGluedShapesFlags.visGluedShapesIncoming2D, "");
if (in2DArray.Length == 0)
{
// Issue Handling: Sequenzfluss braucht vorangehendes Element
entrypointValidatorRuleSet.Rules[6].AddIssue(inFlow.ContainingPage, inFlow);
}
//In Liste mit allen 2D Shapes casten --> Liste enthält das 2D Shape welchses sich vor dem EntryPoint befindet
foreach(Object element in in2DArray)
{
in2DShapeList.Add(shapes.get_ItemFromID((int)element));
}
//prüfe vor vorangehendes Element eine Identifikation ist
foreach(Visio.Shape in2DShape in in2DShapeList)
{
if(in2DShape.Master.Name != "Identification")
{
// Issue Handling: Wenn EntryPoint vor einem Schutzbereich steht, muss vor dem EntryPoint eine Identifikation statt finden
//customRule3.AddIssue(shape.ContainingPage, shape);
entrypointValidatorRuleSet.Rules[3].AddIssue(shape.ContainingPage, shape);
}
}
}
}
}
}
}
if(inGroup == false)
{
// Issue Handling: out 2D shape ist nicht Teil einer Gruppe
//customRule4.AddIssue(out2DShape.ContainingPage, out2DShape);
entrypointValidatorRuleSet.Rules[4].AddIssue(shape.ContainingPage, shape);
}
}
}
}
}
}
}
public static IList <IVisio.Shape> GetShapesFromIDs(this IVisio.Shapes shapes, IList <short> shapeids)
{
return(Shapes.ShapeHelper.GetShapesFromIDs(shapes, shapeids));
}
public void surveillanceValidator(Visio.Shapes shapes, Visio.Document document, Visio.ValidationRuleSet surveillanceValidatorRuleSet)
{
var surveillanceShapes = new List<String>();
surveillanceShapes.Add("SecurityGuard");
surveillanceShapes.Add("CCTV");
surveillanceShapes.Add("AlarmSystem");
surveillanceShapes.Add("SecurityGuardTask.54"); //kp warum der Master so heißt
foreach (Visio.Shape shape in shapes)
{
if (surveillanceShapes.Contains(shape.Master.Name))
{
var containerShapes = new List<Visio.Shape>();
Boolean inGroup = false;
//Prüft ob es sich um die S.G._Task handelt
if (shape.Master.Name == "SecurityGuardTask.54")
{
// holt alle Flows von dem S.G._Task
var outgoingShapes = new List<Visio.Shape>();
Array outgoing1Dshapes = shape.GluedShapes(Visio.VisGluedShapesFlags.visGluedShapesOutgoing1D, "");
foreach (Object element in outgoing1Dshapes)
{
outgoingShapes.Add(shapes.get_ItemFromID((int)element));
}
Boolean hasMsgFlow = false;
foreach(Visio.Shape outFlow in outgoingShapes)
{
if(outFlow.Master.Name == "Nachrichtenfluss")
{
hasMsgFlow = true;
}
}
if(hasMsgFlow == false)
{
// Issue Handling: No outgoing Message Flow bei der SecurityGuardTask (Regel 4 [13])
surveillanceValidatorRuleSet.Rules[4].AddIssue(shape.ContainingPage, shape);
}
continue; //shape von weiterer Bearbeitung ausschließen
}
//Prüft ob dem Shape ein Container zugeordnet ist, wenn nicht: Verstoß gegen Modellierungsregel 1
if(shape.MemberOfContainers.Length == 0){
//customRule1.AddIssue(shape.ContainingPage, shape);
surveillanceValidatorRuleSet.Rules[1].AddIssue(shape.ContainingPage, shape);
}
else{
//Holt alle Container Objekte in denen das aktuelle Shape liegt; Fügt sie der Liste containerIDs hinzu
Array containerIDs = shape.MemberOfContainers;
foreach(Object element in containerIDs){
containerShapes.Add(shapes.get_ItemFromID((int)element));
}
foreach(Visio.Shape container in containerShapes){
if(container.Master.NameU == "Group"){
var outgoingShapes = new List<Visio.Shape>();
Array outgoing1Dshapes = container.GluedShapes(Visio.VisGluedShapesFlags.visGluedShapesOutgoing1D, "");
foreach (Object element in outgoing1Dshapes)
{
outgoingShapes.Add(shapes.get_ItemFromID((int)element));
}
if (!outgoingShapes.Any())
{
// Issue Handling: Kein outgoing Message Flow an dem überwachten Group-Shape
//customRule2.AddIssue(shape.ContainingPage, shape);
surveillanceValidatorRuleSet.Rules[2].AddIssue(shape.ContainingPage, shape);
}
inGroup = true;
break;
}
}
//Surveillance Shape in einer Lane/in einem Pool.
if (inGroup == false)
{
foreach (Visio.Shape container in containerShapes)
{
if (container.Master.NameU == "Swimlane List")
{
var cffOfCont = new List<Visio.Shape>();
Array cont = container.MemberOfContainers;
// erstellt eine Liste mit den CFF containern des Swimlane List containers (hoffentlich immer nur einer) ->Funktioniert das?
// die Konnektoren hängen nur an den CFF-Containern: der CFF-Container beinhaltet eine "Swimlane List" und eine "Phasen List" (Container Elemente "Pool/Lane" dafür nicht nutzbar warum auch immer)
foreach(Object element in cont)
{
if(shapes.get_ItemFromID((int)element).Master.Name == "CFF-Container")
{
cffOfCont.Add(shapes.get_ItemFromID((int)element));
}
}
//Überspringt wahrscheinlich die schleife --> If abfrage??
foreach (Visio.Shape cff in cffOfCont)
{
var outgoingShapes = new List<Visio.Shape>();
Array outgoing1Dshapes = cff.GluedShapes(Visio.VisGluedShapesFlags.visGluedShapesOutgoing1D, "");
foreach (Object element in outgoing1Dshapes)
{
outgoingShapes.Add(shapes.get_ItemFromID((int)element));
}
//hat der cff container outgoing 1D shapes?
if (!outgoingShapes.Any())
{
// Issue Handling: Kein outgoing Message Flow an dem überwachten Lane-Shape
//customRule3.AddIssue(shape.ContainingPage, shape);
surveillanceValidatorRuleSet.Rules[3].AddIssue(shape.ContainingPage, shape);
}
}
}
}
}
}
}
}
}
public void gatewayValidator(Visio.Shapes shapes, Visio.Document document, Visio.ValidationRuleSet gatewayValidatorRuleSet)
{
foreach (Visio.Shape shape in shapes)
{
if(shape.Master.NameU == "Gateway")
{
Boolean mixedFlows = false;
var incomingShapes = new List<Visio.Shape>();
var outgoingShapes = new List<Visio.Shape>();
Array incoming1Dshapes = shape.GluedShapes(Visio.VisGluedShapesFlags.visGluedShapesIncoming1D, "");
Array outgoing1Dshapes = shape.GluedShapes(Visio.VisGluedShapesFlags.visGluedShapesOutgoing1D, "");
if(incoming1Dshapes.Length == 0)
{
//Issue Handling Keine eingehenden Flows
gatewayValidatorRuleSet.Rules[3].AddIssue(shape.ContainingPage, shape);
continue;
}
if(outgoing1Dshapes.Length == 0)
{
//Issue Handling Keine ausgehenden Flows
gatewayValidatorRuleSet.Rules[3].AddIssue(shape.ContainingPage, shape);
continue;
}
foreach (Object element in incoming1Dshapes)
{
incomingShapes.Add(shapes.get_ItemFromID((int)element));
}
foreach (Object element in outgoing1Dshapes)
{
outgoingShapes.Add(shapes.get_ItemFromID((int)element));
}
String comparisonShape = incomingShapes.First().Master.Name;
foreach (Visio.Shape current in incomingShapes)
{
if(current.Master.Name != comparisonShape)
{ //Wenn ungleiche Sequenzflüsse zusammengeführt werden, müssen ausgehende Sequenzflüsse DangerFlows sein.
mixedFlows = true;
foreach(Visio.Shape x in outgoingShapes)
{
if(x.Master.Name != "DangerFlow")
{
//customRule1.AddIssue(x.ContainingPage, x);
gatewayValidatorRuleSet.Rules[1].AddIssue(shape.ContainingPage, x);
}
}
break;
}
}
//Alle eingehenden Sequenzflüsse sind gleich, aber mindestens ein ausgehender Sequenzfluss ist ungleich.
if(mixedFlows == false)
{
foreach(Visio.Shape element in outgoingShapes)
{
if(element.Master.Name != comparisonShape)
{
//customRule2.AddIssue(element.ContainingPage, element);
gatewayValidatorRuleSet.Rules[2].AddIssue(shape.ContainingPage, element);
}
}
}
}
}
}
public void inspectionValidator(Visio.Shapes shapes, Visio.Document document, Visio.ValidationRuleSet inspectionValidatorRuleSet)
{
// TODO: Dynamisch codieren, dass es nur einen outgoing sequence flow geben darf.
//int count = 0;
foreach(Visio.Shape shape in shapes)
{
if(shape.Master.Name == "Inspection")
{
int count = 0;
var gluedShapesIDs = new List<int>();
if (shape.GluedShapes(Visio.VisGluedShapesFlags.visGluedShapesOutgoing1D, "").Length > 1)
{
//Issue Handling: Missing Outgoing Sequence Flow for secure case distinction
var outgoingShapes = new List<Visio.Shape>();
Array outgoing1Dshapes = shape.GluedShapes(Visio.VisGluedShapesFlags.visGluedShapesOutgoing1D, "");
int seqFlows = 0;
foreach (Object element in outgoing1Dshapes)
{
outgoingShapes.Add(shapes.get_ItemFromID((int)element));
}
foreach(Visio.Shape flow in outgoingShapes)
{
if(flow.Master.NameU == "Sequence Flow")
{
seqFlows++;
}
}
if (seqFlows != 1)
{
inspectionValidatorRuleSet.Rules[1].AddIssue(shape.ContainingPage, shape);
}
}
Array glued2Dshapes = shape.GluedShapes(Visio.VisGluedShapesFlags.visGluedShapesAll2D, "");
foreach(Object element in glued2Dshapes){
gluedShapesIDs.Add((int)element);
}
if (!gluedShapesIDs.Any())
{
inspectionValidatorRuleSet.Rules[2].AddIssue(shape.ContainingPage, shape); // Issue Handling: Keine glued 2D Shapes vorhanden
break;
}
else
{
foreach(int id in gluedShapesIDs)
{
if (shapes.get_ItemFromID(id).Master.Name == "Violation")
{
count++;
}
}
if (count== 0)
{
inspectionValidatorRuleSet.Rules[3].AddIssue(shape.ContainingPage, shape); // Issue Handling: Keine "Violation"-Shape an das Inspection-Shape geklebt.
}
}
}
}
}
public RenderContext(IVisio.Page visio_page)
{
this.id_to_shape = new Dictionary<short, IVisio.Shape>();
this.VisioPage = visio_page;
this.pageshapes = visio_page.Shapes;
}
/// <summary>
/// Builds a State Machine from a State Transition Diagram, starting at the given node.
/// </summary>
/// <param name="node">A starting node in the State Transition Diagram.</param>
/// <returns>The State Machine, in the form of a list of States.</returns>
private List <State> buildStateMachine(Visio.Shape node)
{
Visio.Shapes allShapesOnPage = node.ContainingPage.Shapes;
List <State> stateMachine = new List <State>();
// Lists the corresponding Shape for each State in the StateMachine list.
List <Visio.Shape> stateShapes = new List <Visio.Shape>();
// For each node, create a State for it (if it doesn't already exist)
// & adds the State to the stateMachine (if it isn't already in the list).
// Each node is connected to other nodes via a connector.
bool notDone = true;
int currentStateIndex = 0;
while (notDone)
{
// if current state is not part of the state machine, add it
string currentStateName = node.Text;
State currentState = stateExists(stateMachine, currentStateName);
if (currentState == null)
{
currentState = new State(currentStateName, node.Master.Name);
stateMachine.Add(currentState);
stateShapes.Add(node);
}
// for the current state, get all transitions to its next state
int[] transitions = (int[])node.GluedShapes(
Visio.VisGluedShapesFlags.visGluedShapesOutgoing1D, "");
// each transition leads to a next state
foreach (int t in transitions)
{
Visio.Shape connector = allShapesOnPage.get_ItemFromID(t);
int[] nextStateID = (int[])connector.GluedShapes(
Visio.VisGluedShapesFlags.visGluedShapesOutgoing2D, "");
// there's only one shape connected to one end of a 1-D connector,
// but it could be a shape that's already been made into a State
Visio.Shape nextStateShape = allShapesOnPage.get_ItemFromID(nextStateID[0]);
string nextStateName = nextStateShape.Text;
State nextState = stateExists(stateMachine, nextStateName);
if (nextState == null)
{
nextState = new State(nextStateName, nextStateShape.Master.Name);
stateMachine.Add(nextState);
stateShapes.Add(nextStateShape);
}
// assumes that a Connector always has two data associated with it
// separated by a ','
string[] connectorData = connector.Text.Split(',');
currentState.addNextState(connectorData[0], connectorData[1], nextState);
}
// Needs to get states that lead to this state, else depending on the
// starting state, won't be able to reach all states if we use just
// next state transitions. Ex: starting at the End State, there are no
// transitions that leads to another state & so won't be able to find
// what other states are in the system.
// for the current state, get all transitions that led to this state
int[] backTransitions = (int[])node.GluedShapes(
Visio.VisGluedShapesFlags.visGluedShapesIncoming1D, "");
// each backTransition points to a previous state
foreach (int t in backTransitions)
{
Visio.Shape connector = allShapesOnPage.get_ItemFromID(t);
int[] prevStateID = (int[])connector.GluedShapes(
Visio.VisGluedShapesFlags.visGluedShapesIncoming2D, "");
// there's only one shape connected to one end of a 1-D connector,
// but it could be a shape that's already been made into a State
Visio.Shape prevStateShape = allShapesOnPage.get_ItemFromID(prevStateID[0]);
string prevStateName = prevStateShape.Text;
State prevState = stateExists(stateMachine, prevStateName);
if (prevState == null)
{
prevState = new State(prevStateName, prevStateShape.Master.Name);
stateMachine.Add(prevState);
stateShapes.Add(prevStateShape);
}
}
++currentStateIndex;
// done if there are no more States to check in the StateMachine.
if (currentStateIndex >= stateMachine.Count)
{
notDone = false;
}
else
{
node = stateShapes[currentStateIndex];
}
}
return(stateMachine);
}