/// <summary>
/// Gathers toolset data from the registry and configuration file, if any.
/// NOTE: this method is internal for unit testing purposes only.
/// </summary>
internal static string ReadAllToolsets
(
Dictionary <string, Toolset> toolsets,
#if FEATURE_WIN32_REGISTRY
ToolsetRegistryReader registryReader,
#endif
#if FEATURE_SYSTEM_CONFIGURATION
ToolsetConfigurationReader configurationReader,
#endif
PropertyDictionary <ProjectPropertyInstance> environmentProperties,
PropertyDictionary <ProjectPropertyInstance> globalProperties,
ToolsetDefinitionLocations locations
)
{
var initialProperties =
new PropertyDictionary <ProjectPropertyInstance>(environmentProperties);
initialProperties.ImportProperties(globalProperties);
// The ordering here is important because the configuration file should have greater precedence
// than the registry, and we do a check and don't read in the new toolset if there's already one.
string defaultToolsVersionFromConfiguration = null;
string overrideTasksPathFromConfiguration = null;
string defaultOverrideToolsVersionFromConfiguration = null;
#if FEATURE_SYSTEM_CONFIGURATION
if ((locations & ToolsetDefinitionLocations.ConfigurationFile) == ToolsetDefinitionLocations.ConfigurationFile)
{
if (configurationReader == null)
{
configurationReader = new ToolsetConfigurationReader(environmentProperties, globalProperties);
}
// Accumulation of properties is okay in the config file because it's deterministically ordered
defaultToolsVersionFromConfiguration = configurationReader.ReadToolsets(toolsets, globalProperties,
initialProperties, true /* accumulate properties */, out overrideTasksPathFromConfiguration,
out defaultOverrideToolsVersionFromConfiguration);
}
#endif
string defaultToolsVersionFromRegistry = null;
string overrideTasksPathFromRegistry = null;
string defaultOverrideToolsVersionFromRegistry = null;
if ((locations & ToolsetDefinitionLocations.Registry) == ToolsetDefinitionLocations.Registry)
{
#if FEATURE_WIN32_REGISTRY
if (NativeMethodsShared.IsWindows || registryReader != null)
{
// If we haven't been provided a registry reader (i.e. unit tests), create one
registryReader = registryReader ?? new ToolsetRegistryReader(environmentProperties, globalProperties);
// We do not accumulate properties when reading them from the registry, because the order
// in which values are returned to us is essentially random: so we disallow one property
// in the registry to refer to another also in the registry
defaultToolsVersionFromRegistry = registryReader.ReadToolsets(toolsets, globalProperties,
initialProperties, false /* do not accumulate properties */, out overrideTasksPathFromRegistry,
out defaultOverrideToolsVersionFromRegistry);
}
else
#endif
{
var currentDir = BuildEnvironmentHelper.Instance.CurrentMSBuildToolsDirectory.TrimEnd(Path.DirectorySeparatorChar);
var props = new PropertyDictionary <ProjectPropertyInstance>();
var libraryPath = NativeMethodsShared.FrameworkBasePath;
if (!string.IsNullOrEmpty(libraryPath))
{
// The 4.0 toolset is installed in the framework directory
var v4Dir =
FrameworkLocationHelper.GetPathToDotNetFrameworkV40(DotNetFrameworkArchitecture.Current);
if (v4Dir != null && !toolsets.ContainsKey("4.0"))
{
// Create standard properties. On Mono they are well known
var buildProperties =
CreateStandardProperties(globalProperties, "4.0", libraryPath, v4Dir);
toolsets.Add(
"4.0",
new Toolset(
"4.0",
v4Dir,
buildProperties,
environmentProperties,
globalProperties,
null,
currentDir,
string.Empty));
}
// Other toolsets are installed in the xbuild directory
var xbuildToolsetsDir = Path.Combine(libraryPath, $"xbuild{Path.DirectorySeparatorChar}");
if (FileSystems.Default.DirectoryExists(xbuildToolsetsDir))
{
var r = new Regex(Regex.Escape(xbuildToolsetsDir) + @"\d+\.\d+");
foreach (var d in Directory.GetDirectories(xbuildToolsetsDir).Where(d => r.IsMatch(d)))
{
var version = Path.GetFileName(d);
var binPath = Path.Combine(d, "bin");
if (toolsets.ContainsKey(version))
{
continue;
}
if (NativeMethodsShared.IsMono && Version.TryParse(version, out Version parsedVersion) && parsedVersion.Major > 14)
{
continue;
}
// Create standard properties. On Mono they are well known
var buildProperties =
CreateStandardProperties(globalProperties, version, xbuildToolsetsDir, binPath);
toolsets.Add(
version,
new Toolset(
version,
binPath,
buildProperties,
environmentProperties,
globalProperties,
null,
currentDir,
string.Empty));
}
}
}
if (!toolsets.ContainsKey(MSBuildConstants.CurrentToolsVersion))
{
toolsets.Add(
MSBuildConstants.CurrentToolsVersion,
new Toolset(
MSBuildConstants.CurrentToolsVersion,
currentDir,
props,
new PropertyDictionary <ProjectPropertyInstance>(),
currentDir,
string.Empty));
}
}
}
// The 2.0 .NET Framework installer did not write a ToolsVersion key for itself in the registry.
// The 3.5 installer writes one for 2.0, but 3.5 might not be installed.
// The 4.0 and subsequent installers can't keep writing the 2.0 one, because (a) it causes SxS issues and (b) we
// don't want it unless 2.0 is installed.
// So if the 2.0 framework is actually installed, we're reading the registry, and either the registry or the config
// file have not already created the 2.0 toolset, mock up a fake one.
if (((locations & ToolsetDefinitionLocations.Registry) != 0) && !toolsets.ContainsKey("2.0") &&
FrameworkLocationHelper.PathToDotNetFrameworkV20 != null)
{
var synthetic20Toolset = new Toolset(
"2.0",
FrameworkLocationHelper.PathToDotNetFrameworkV20,
environmentProperties,
globalProperties,
null /* 2.0 did not have override tasks */,
null /* 2.0 did not have a default override toolsversion */);
toolsets.Add("2.0", synthetic20Toolset);
}
string defaultToolsVersionFromLocal = null;
string overrideTasksPathFromLocal = null;
string defaultOverrideToolsVersionFromLocal = null;
if ((locations & ToolsetDefinitionLocations.Local) == ToolsetDefinitionLocations.Local)
{
var localReader = new ToolsetLocalReader(environmentProperties, globalProperties);
defaultToolsVersionFromLocal = localReader.ReadToolsets(
toolsets,
globalProperties,
initialProperties,
false /* accumulate properties */,
out overrideTasksPathFromLocal,
out defaultOverrideToolsVersionFromLocal);
}
// We'll use the path from the configuration file if it was specified, otherwise we'll try
// the one from the registry. It's possible (and valid) that neither the configuration file
// nor the registry specify a override in which case we'll just return null.
var overrideTasksPath = overrideTasksPathFromConfiguration ?? overrideTasksPathFromRegistry ?? overrideTasksPathFromLocal;
// We'll use the path from the configuration file if it was specified, otherwise we'll try
// the one from the registry. It's possible (and valid) that neither the configuration file
// nor the registry specify a override in which case we'll just return null.
var defaultOverrideToolsVersion = defaultOverrideToolsVersionFromConfiguration
?? defaultOverrideToolsVersionFromRegistry
?? defaultOverrideToolsVersionFromLocal;
// We'll use the default from the configuration file if it was specified, otherwise we'll try
// the one from the registry. It's possible (and valid) that neither the configuration file
// nor the registry specify a default, in which case we'll just return null.
var defaultToolsVersion = defaultToolsVersionFromConfiguration ?? defaultToolsVersionFromRegistry ?? defaultToolsVersionFromLocal;
// If we got a default version from the registry or config file, and it
// actually exists, fine.
// Otherwise we have to come up with one.
if (defaultToolsVersion != null && toolsets.ContainsKey(defaultToolsVersion))
{
return(defaultToolsVersion);
}
// We're going to choose a hard coded default tools version of 2.0.
defaultToolsVersion = Constants.defaultToolsVersion;
// But don't overwrite any existing tools path for this default we're choosing.
if (toolsets.ContainsKey(Constants.defaultToolsVersion))
{
return(defaultToolsVersion);
}
// There's no tools path already for 2.0, so use the path to the v2.0 .NET Framework.
// If an old-fashioned caller sets BinPath property, or passed a BinPath to the constructor,
// that will overwrite what we're setting here.
ErrorUtilities.VerifyThrow(
Constants.defaultToolsVersion == "2.0",
"Getting 2.0 FX path so default should be 2.0");
var pathToFramework = FrameworkLocationHelper.PathToDotNetFrameworkV20;
// We could not find the default toolsversion because it was not installed on the machine. Fallback to the
// one we expect to always be there when running msbuild 4.0.
if (pathToFramework == null)
{
pathToFramework = FrameworkLocationHelper.PathToDotNetFrameworkV40;
defaultToolsVersion = Constants.defaultFallbackToolsVersion;
}
// Again don't overwrite any existing tools path for this default we're choosing.
if (toolsets.ContainsKey(defaultToolsVersion))
{
return(defaultToolsVersion);
}
var defaultToolset = new Toolset(
defaultToolsVersion,
pathToFramework,
environmentProperties,
globalProperties,
overrideTasksPath,
defaultOverrideToolsVersion);
toolsets.Add(defaultToolsVersion, defaultToolset);
return(defaultToolsVersion);
}
/// <summary>
/// Gathers toolset data from the registry and configuration file, if any.
/// NOTE: this method is internal for unit testing purposes only.
/// </summary>
internal static string ReadAllToolsets
(
Dictionary<string, Toolset> toolsets,
ToolsetRegistryReader registryReader,
ToolsetConfigurationReader configurationReader,
PropertyDictionary<ProjectPropertyInstance> environmentProperties,
PropertyDictionary<ProjectPropertyInstance> globalProperties,
ToolsetDefinitionLocations locations
)
{
PropertyDictionary<ProjectPropertyInstance> initialProperties = new PropertyDictionary<ProjectPropertyInstance>(environmentProperties);
initialProperties.ImportProperties(globalProperties);
// The ordering here is important because the configuration file should have greater precedence
// than the registry, and we do a check and don't read in the new toolset if there's already one.
string defaultToolsVersionFromConfiguration = null;
string overrideTasksPathFromConfiguration = null;
string defaultOverrideToolsVersionFromConfiguration = null;
if ((locations & ToolsetDefinitionLocations.ConfigurationFile) == ToolsetDefinitionLocations.ConfigurationFile)
{
if (configurationReader == null && ToolsetConfigurationReaderHelpers.ConfigurationFileMayHaveToolsets())
{
// We haven't been passed in a fake configuration reader by a unit test,
// and it looks like we have a .config file to read, so create a real
// configuration reader
configurationReader = new ToolsetConfigurationReader(environmentProperties, globalProperties);
}
if (configurationReader != null)
{
// Accumulation of properties is okay in the config file because it's deterministically ordered
defaultToolsVersionFromConfiguration = configurationReader.ReadToolsets(toolsets, globalProperties,
initialProperties, true /* accumulate properties */, out overrideTasksPathFromConfiguration,
out defaultOverrideToolsVersionFromConfiguration);
}
}
string defaultToolsVersionFromRegistry = null;
string overrideTasksPathFromRegistry = null;
string defaultOverrideToolsVersionFromRegistry = null;
if ((locations & ToolsetDefinitionLocations.Registry) == ToolsetDefinitionLocations.Registry)
{
// If we haven't been provided a registry reader (i.e. unit tests), create one
registryReader = registryReader ?? new ToolsetRegistryReader(environmentProperties, globalProperties);
// We do not accumulate properties when reading them from the registry, because the order
// in which values are returned to us is essentially random: so we disallow one property
// in the registry to refer to another also in the registry
defaultToolsVersionFromRegistry = registryReader.ReadToolsets(toolsets, globalProperties,
initialProperties, false /* do not accumulate properties */, out overrideTasksPathFromRegistry,
out defaultOverrideToolsVersionFromRegistry);
}
// The 2.0 .NET Framework installer did not write a ToolsVersion key for itself in the registry.
// The 3.5 installer writes one for 2.0, but 3.5 might not be installed.
// The 4.0 and subsequent installers can't keep writing the 2.0 one, because (a) it causes SxS issues and (b) we
// don't want it unless 2.0 is installed.
// So if the 2.0 framework is actually installed, we're reading the registry, and either the registry or the config
// file have not already created the 2.0 toolset, mock up a fake one.
if (
((locations & ToolsetDefinitionLocations.Registry) != 0) &&
!toolsets.ContainsKey("2.0") &&
FrameworkLocationHelper.PathToDotNetFrameworkV20 != null
)
{
Toolset synthetic20Toolset = new Toolset("2.0", FrameworkLocationHelper.PathToDotNetFrameworkV20, environmentProperties, globalProperties, null /* 2.0 did not have override tasks */, null /* 2.0 did not have a default override toolsversion */);
toolsets.Add("2.0", synthetic20Toolset);
}
// We'll use the path from the configuration file if it was specified, otherwise we'll try
// the one from the registry. It's possible (and valid) that neither the configuration file
// nor the registry specify a override in which case we'll just return null.
string overrideTasksPath = overrideTasksPathFromConfiguration ?? overrideTasksPathFromRegistry;
// We'll use the path from the configuration file if it was specified, otherwise we'll try
// the one from the registry. It's possible (and valid) that neither the configuration file
// nor the registry specify a override in which case we'll just return null.
string defaultOverrideToolsVersion = defaultOverrideToolsVersionFromConfiguration ?? defaultOverrideToolsVersionFromRegistry;
// We'll use the default from the configuration file if it was specified, otherwise we'll try
// the one from the registry. It's possible (and valid) that neither the configuration file
// nor the registry specify a default, in which case we'll just return null.
string defaultToolsVersion = defaultToolsVersionFromConfiguration ?? defaultToolsVersionFromRegistry;
// If we got a default version from the registry or config file, and it
// actually exists, fine.
// Otherwise we have to come up with one.
if (defaultToolsVersion == null || !toolsets.ContainsKey(defaultToolsVersion))
{
// We're going to choose a hard coded default tools version of 2.0.
defaultToolsVersion = Constants.defaultToolsVersion;
// But don't overwrite any existing tools path for this default we're choosing.
if (!toolsets.ContainsKey(Constants.defaultToolsVersion))
{
// There's no tools path already for 2.0, so use the path to the v2.0 .NET Framework.
// If an old-fashioned caller sets BinPath property, or passed a BinPath to the constructor,
// that will overwrite what we're setting here.
ErrorUtilities.VerifyThrow(Constants.defaultToolsVersion == "2.0", "Getting 2.0 FX path so default should be 2.0");
string pathToFramework = FrameworkLocationHelper.PathToDotNetFrameworkV20;
// We could not find the default toolsversion because it was not installed on the machine. Fallback to the
// one we expect to always be there when running msbuild 4.0.
if (pathToFramework == null)
{
pathToFramework = FrameworkLocationHelper.PathToDotNetFrameworkV40;
defaultToolsVersion = Constants.defaultFallbackToolsVersion;
}
// Again don't overwrite any existing tools path for this default we're choosing.
if (!toolsets.ContainsKey(defaultToolsVersion))
{
Toolset defaultToolset = new Toolset(defaultToolsVersion, pathToFramework, environmentProperties, globalProperties, overrideTasksPath, defaultOverrideToolsVersion);
toolsets.Add(defaultToolsVersion, defaultToolset);
}
}
}
return defaultToolsVersion;
}
public void DefaultValueInRegistryDoesNotExist()
{
ToolsetReader reader = new ToolsetRegistryReader(new ProjectCollection().EnvironmentProperties, new PropertyDictionary<ProjectPropertyInstance>(), new MockRegistryKey(testRegistryPath, "3.5" /* fail to find subkey 3.5 */));
Dictionary<string, Toolset> values = new Dictionary<string, Toolset>(StringComparer.OrdinalIgnoreCase);
// Should not throw
string msbuildOverrideTasksPath = null;
string defaultOverrideToolsVersion = null;
string defaultToolsVersion = reader.ReadToolsets(values, new PropertyDictionary<ProjectPropertyInstance>(), new PropertyDictionary<ProjectPropertyInstance>(), false, out msbuildOverrideTasksPath, out defaultOverrideToolsVersion);
Assert.Equal(null, defaultToolsVersion);
}
/// <summary>
/// Gathers toolset data from the registry and configuration file, if any.
/// NOTE: this method is internal for unit testing purposes only.
/// </summary>
internal static string ReadAllToolsets
(
Dictionary <string, Toolset> toolsets,
ToolsetRegistryReader registryReader,
ToolsetConfigurationReader configurationReader,
PropertyDictionary <ProjectPropertyInstance> environmentProperties,
PropertyDictionary <ProjectPropertyInstance> globalProperties,
ToolsetDefinitionLocations locations
)
{
PropertyDictionary <ProjectPropertyInstance> initialProperties = new PropertyDictionary <ProjectPropertyInstance>(environmentProperties);
initialProperties.ImportProperties(globalProperties);
// The ordering here is important because the configuration file should have greater precedence
// than the registry, and we do a check and don't read in the new toolset if there's already one.
string defaultToolsVersionFromConfiguration = null;
string overrideTasksPathFromConfiguration = null;
string defaultOverrideToolsVersionFromConfiguration = null;
if ((locations & ToolsetDefinitionLocations.ConfigurationFile) == ToolsetDefinitionLocations.ConfigurationFile)
{
if (configurationReader == null && ToolsetConfigurationReaderHelpers.ConfigurationFileMayHaveToolsets())
{
// We haven't been passed in a fake configuration reader by a unit test,
// and it looks like we have a .config file to read, so create a real
// configuration reader
configurationReader = new ToolsetConfigurationReader(environmentProperties, globalProperties);
}
if (configurationReader != null)
{
// Accumulation of properties is okay in the config file because it's deterministically ordered
defaultToolsVersionFromConfiguration = configurationReader.ReadToolsets(toolsets, globalProperties,
initialProperties, true /* accumulate properties */, out overrideTasksPathFromConfiguration,
out defaultOverrideToolsVersionFromConfiguration);
}
}
string defaultToolsVersionFromRegistry = null;
string overrideTasksPathFromRegistry = null;
string defaultOverrideToolsVersionFromRegistry = null;
if ((locations & ToolsetDefinitionLocations.Registry) == ToolsetDefinitionLocations.Registry)
{
// If we haven't been provided a registry reader (i.e. unit tests), create one
registryReader = registryReader ?? new ToolsetRegistryReader(environmentProperties, globalProperties);
// We do not accumulate properties when reading them from the registry, because the order
// in which values are returned to us is essentially random: so we disallow one property
// in the registry to refer to another also in the registry
defaultToolsVersionFromRegistry = registryReader.ReadToolsets(toolsets, globalProperties,
initialProperties, false /* do not accumulate properties */, out overrideTasksPathFromRegistry,
out defaultOverrideToolsVersionFromRegistry);
}
// The 2.0 .NET Framework installer did not write a ToolsVersion key for itself in the registry.
// The 3.5 installer writes one for 2.0, but 3.5 might not be installed.
// The 4.0 and subsequent installers can't keep writing the 2.0 one, because (a) it causes SxS issues and (b) we
// don't want it unless 2.0 is installed.
// So if the 2.0 framework is actually installed, we're reading the registry, and either the registry or the config
// file have not already created the 2.0 toolset, mock up a fake one.
if (
((locations & ToolsetDefinitionLocations.Registry) != 0) &&
!toolsets.ContainsKey("2.0") &&
FrameworkLocationHelper.PathToDotNetFrameworkV20 != null
)
{
Toolset synthetic20Toolset = new Toolset("2.0", FrameworkLocationHelper.PathToDotNetFrameworkV20, environmentProperties, globalProperties, null /* 2.0 did not have override tasks */, null /* 2.0 did not have a default override toolsversion */);
toolsets.Add("2.0", synthetic20Toolset);
}
// We'll use the path from the configuration file if it was specified, otherwise we'll try
// the one from the registry. It's possible (and valid) that neither the configuration file
// nor the registry specify a override in which case we'll just return null.
string overrideTasksPath = overrideTasksPathFromConfiguration ?? overrideTasksPathFromRegistry;
// We'll use the path from the configuration file if it was specified, otherwise we'll try
// the one from the registry. It's possible (and valid) that neither the configuration file
// nor the registry specify a override in which case we'll just return null.
string defaultOverrideToolsVersion = defaultOverrideToolsVersionFromConfiguration ?? defaultOverrideToolsVersionFromRegistry;
// We'll use the default from the configuration file if it was specified, otherwise we'll try
// the one from the registry. It's possible (and valid) that neither the configuration file
// nor the registry specify a default, in which case we'll just return null.
string defaultToolsVersion = defaultToolsVersionFromConfiguration ?? defaultToolsVersionFromRegistry;
// If we got a default version from the registry or config file, and it
// actually exists, fine.
// Otherwise we have to come up with one.
if (defaultToolsVersion == null || !toolsets.ContainsKey(defaultToolsVersion))
{
// We're going to choose a hard coded default tools version of 2.0.
defaultToolsVersion = Constants.defaultToolsVersion;
// But don't overwrite any existing tools path for this default we're choosing.
if (!toolsets.ContainsKey(Constants.defaultToolsVersion))
{
// There's no tools path already for 2.0, so use the path to the v2.0 .NET Framework.
// If an old-fashioned caller sets BinPath property, or passed a BinPath to the constructor,
// that will overwrite what we're setting here.
ErrorUtilities.VerifyThrow(Constants.defaultToolsVersion == "2.0", "Getting 2.0 FX path so default should be 2.0");
string pathToFramework = FrameworkLocationHelper.PathToDotNetFrameworkV20;
// We could not find the default toolsversion because it was not installed on the machine. Fallback to the
// one we expect to always be there when running msbuild 4.0.
if (pathToFramework == null)
{
pathToFramework = FrameworkLocationHelper.PathToDotNetFrameworkV40;
defaultToolsVersion = Constants.defaultFallbackToolsVersion;
}
// Again don't overwrite any existing tools path for this default we're choosing.
if (!toolsets.ContainsKey(defaultToolsVersion))
{
Toolset defaultToolset = new Toolset(defaultToolsVersion, pathToFramework, environmentProperties, globalProperties, overrideTasksPath, defaultOverrideToolsVersion);
toolsets.Add(defaultToolsVersion, defaultToolset);
}
}
}
return(defaultToolsVersion);
}
// Ignore: Test requires installed toolset.
public void DefaultValuesInRegistryCreatedBySetup()
{
ToolsetReader reader = new ToolsetRegistryReader(new ProjectCollection().EnvironmentProperties, new PropertyDictionary<ProjectPropertyInstance>()); //we don't use the test registry key because we want to verify the install
Dictionary<string, Toolset> values = new Dictionary<string, Toolset>(StringComparer.OrdinalIgnoreCase);
string msbuildOverrideTasksPath = null;
string defaultOverrideToolsVersion = null;
string defaultToolsVersion = reader.ReadToolsets(values, new PropertyDictionary<ProjectPropertyInstance>(), new PropertyDictionary<ProjectPropertyInstance>(), false, out msbuildOverrideTasksPath, out defaultOverrideToolsVersion);
// Check the values in the data
Assert.True(values.ContainsKey("4.0")); // "Tools version 4.0 should be defined by default"
Assert.True(values.ContainsKey(ObjectModelHelpers.MSBuildDefaultToolsVersion), String.Format("Tools version {0} should be defined by default", ObjectModelHelpers.MSBuildDefaultToolsVersion));
Assert.Equal("2.0", defaultToolsVersion); // "Default tools version should be 2.0"
}