public Task WriteHeadersAsync(
IEnumerable <HeaderField> headers, bool endOfStream)
{
HeaderValidationResult hvr;
// TODO: For push promises other validates might need to be used
if (connection.IsServer)
{
hvr = HeaderValidator.ValidateResponseHeaders(headers);
}
else
{
hvr = HeaderValidator.ValidateRequestHeaders(headers);
}
if (hvr != HeaderValidationResult.Ok)
{
throw new Exception(hvr.ToString());
}
return(WriteValidatedHeadersAsync(headers, endOfStream));
}
/// <summary>
/// Processes the reception of incoming headers
/// </summary>
public Http2Error?ProcessHeaders(
CompleteHeadersFrameData headers)
{
var wakeupDataWaiter = false;
var wakeupHeaderWaiter = false;
var wakeupTrailerWaiter = false;
var removeStream = false;
lock (stateMutex)
{
// Header frames are not valid in all states
switch (state)
{
case StreamState.ReservedLocal:
case StreamState.ReservedRemote:
// Push promises are currently not implemented
// So this needs to be reviewed later on
// Currently we should never encounter this state
return(new Http2Error
{
StreamId = Id,
Code = ErrorCode.InternalError,
Message = "Received header frame in uncovered push promise state",
});
case StreamState.Idle:
case StreamState.Open:
case StreamState.HalfClosedLocal:
// Open can mean we have already received headers
// (in case we are a server) or not (in case we are
// a client and only have sent headers)
// If headers were already received before there must be
// a data frame in between and these are trailers.
// An exception is if we are client, where we can
// receive informational headers and normal headers.
// This requires no data in between. These header must
// contain a 1xy status code.
// Trailers must have the EndOfStream flag set and must
// always follow after a data frame.
if (headersReceived != HeaderReceptionState.ReceivedAllHeaders)
{
// We are receiving headers
HeaderValidationResult hvr;
if (connection.IsServer)
{
hvr = HeaderValidator.ValidateRequestHeaders(headers.Headers);
}
else
{
hvr = HeaderValidator.ValidateResponseHeaders(headers.Headers);
}
if (hvr != HeaderValidationResult.Ok)
{
return(new Http2Error
{
StreamId = Id,
Code = ErrorCode.ProtocolError,
Message = "Received invalid headers",
});
}
if (!connection.config.IsServer &&
headers.Headers.IsInformationalHeaders())
{
// Clients support the reception of informational headers.
// If this is only an informational header we might
// receive additional headers later on.
headersReceived =
HeaderReceptionState.ReceivedInformationalHeaders;
}
else
{
// Servers don't support informational headers at all.
// And if we are client and directly receive response
// headers it's also fine.
headersReceived =
HeaderReceptionState.ReceivedAllHeaders;
}
wakeupHeaderWaiter = true;
// TODO: Uncompress cookie headers here?
declaredInContentLength = headers.Headers.GetContentLength();
inHeaders = headers.Headers;
}
else if (!dataReceived)
{
// We already have received headers, so this should
// be trailers. However there was no DATA frame in
// between, so this is simply invalid.
return(new Http2Error
{
StreamId = Id,
Code = ErrorCode.ProtocolError,
Message = "Received trailers without headers",
});
}
else
{
// These are trailers
// trailers must have end of stream set. It is not
// valid to receive multiple trailers
if (!headers.EndOfStream)
{
return(new Http2Error
{
StreamId = Id,
Code = ErrorCode.ProtocolError,
Message = "Received trailers without EndOfStream flag",
});
}
var hvr = HeaderValidator.ValidateTrailingHeaders(headers.Headers);
if (hvr != HeaderValidationResult.Ok)
{
return(new Http2Error
{
StreamId = Id,
Code = ErrorCode.ProtocolError,
Message = "Received invalid trailers",
});
}
// If content-length was set we must also validate
// it against the received dataamount here
if (declaredInContentLength >= 0 &&
declaredInContentLength != totalInData)
{
return(new Http2Error
{
StreamId = Id,
Code = ErrorCode.ProtocolError,
Message =
"Length of DATA frames does not match content-length",
});
}
wakeupTrailerWaiter = true;
inTrailers = headers.Headers;
}
// Handle state changes that are caused by HEADERS frame
if (state == StreamState.Idle)
{
state = StreamState.Open;
}
if (headers.EndOfStream)
{
if (state == StreamState.HalfClosedLocal)
{
state = StreamState.Closed;
removeStream = true;
}
else // Must be Open, since Idle moves to Open
{
state = StreamState.HalfClosedRemote;
}
wakeupTrailerWaiter = true;
wakeupDataWaiter = true;
}
break;
case StreamState.HalfClosedRemote:
case StreamState.Closed:
// Received a header frame for a stream that was
// already closed from remote side.
// That's not valid
return(new Http2Error
{
Code = ErrorCode.StreamClosed,
StreamId = Id,
Message = "Received headers for closed stream",
});
case StreamState.Reset:
// The stream was already reset
// What we really should do here depends on the previous state,
// which is not stored for efficiency. If we reset the
// stream late headers are ok. If the remote resetted it
// this is a protocol error for the stream.
// As it does not really matter just ignore the frame.
break;
default:
throw new Exception("Unhandled stream state");
}
}
// Wakeup any blocked calls that are waiting on headers or end of stream
if (wakeupHeaderWaiter)
{
readHeadersPossible.Set();
}
if (wakeupDataWaiter)
{
readDataPossible.Set();
}
if (wakeupTrailerWaiter)
{
readTrailersPossible.Set();
}
if (removeStream)
{
connection.UnregisterStream(this);
}
return(null);
}
public async Task WriteTrailersAsync(IEnumerable <HeaderField> headers)
{
HeaderValidationResult hvr = HeaderValidator.ValidateTrailingHeaders(headers);
// TODO: For push promises other validates might need to be used
if (hvr != HeaderValidationResult.Ok)
{
throw new Exception(hvr.ToString());
}
var removeStream = false;
await writeMutex.WaitAsync();
try
{
// Check what already has been sent
lock (stateMutex)
{
if (!dataSent)
{
throw new Exception("Attempted to write trailers without data");
}
switch (state)
{
case StreamState.Open:
state = StreamState.HalfClosedLocal;
break;
case StreamState.HalfClosedRemote:
state = StreamState.HalfClosedRemote;
state = StreamState.Closed;
removeStream = true;
break;
case StreamState.Idle:
case StreamState.ReservedRemote:
case StreamState.HalfClosedLocal:
case StreamState.Closed:
throw new Exception("Invalid state for sending trailers");
case StreamState.Reset:
throw new StreamResetException();
case StreamState.ReservedLocal:
// We can't be in here if we already have data sent
throw new Exception("Unexpected state: ReservedLocal after data sent");
}
}
await SendHeaders(headers, true); // TODO: Use result
}
finally
{
writeMutex.Release();
if (removeStream)
{
connection.UnregisterStream(this);
}
}
}
/// <summary>
/// Builds a ServerUpgradeRequest from the stored configuration.
/// All other relevant configuration setter methods need to be called
/// before.
/// Only if the ServerUpgradeRequest.IsValid is true an upgrade
/// to HTTP/2 may be performed.
/// </summary>
public ServerUpgradeRequest Build()
{
bool valid = true;
if (settings == null)
{
valid = false;
}
var headers = this.headers;
if (headers == null)
{
valid = false;
}
else
{
// Validate headers
var hvr = HeaderValidator.ValidateRequestHeaders(headers);
if (hvr != HeaderValidationResult.Ok)
{
headers = null;
valid = false;
}
}
long declaredContentLength = -1;
if (headers != null)
{
declaredContentLength = headers.GetContentLength();
// TODO: Handle invalid content lengths, which would yield
// results like -2?
}
byte[] payload = null;
if (this.payload != null && this.payload.Count > 0)
{
// Compare the declared content length against the actual
// content length
if (declaredContentLength != this.payload.Count)
{
valid = false;
}
else
{
payload = new byte[this.payload.Count];
Array.Copy(
this.payload.Array, this.payload.Offset,
payload, 0,
this.payload.Count);
}
}
else if (declaredContentLength > 0)
{
// No payload but Content-Length header was found
valid = false;
}
return(new ServerUpgradeRequest(
settings: settings ?? Settings.Default,
headers: headers,
payload: payload,
valid: valid));
}
