// Token: 0x0600011A RID: 282 RVA: 0x00009C94 File Offset: 0x00007E94
public static void WriteThicknesses(int totalThickness, int productionThickness)
{
ItDebug.assert(totalThickness.Ge(0), "total thickness can not be negative");
ItDebug.assert(productionThickness.Ge(0), "production thickness can not be negative");
ItDebug.assert(productionThickness.Ge(totalThickness), "production thickness can not be smaller than total thickness");
ItUniWrapperImpl.setThicknesses(totalThickness, productionThickness);
}
// Token: 0x06000071 RID: 113 RVA: 0x000053D0 File Offset: 0x000035D0
private bool ExportShellToUnitechnik(AssemblyInstance assemblyInstance, int iProdNo, CNCProjectData projectData, ItMachineDataWallDB.DbwElementData.Shell shell, int doubleWallGapInMM)
{
ItGeMatrix3d matWcsToPalette = base.MatWcsToPalette;
base.MatWcsToPalette = shell.Transformation;
this.Mode = shell.Mode;
bool flag = base.ExportUnitechnik(assemblyInstance, new RevitElement <Part>[]
{
shell.Part
}, iProdNo, projectData);
ItUniWrapperImpl.SetDoubleWallGap(doubleWallGapInMM);
bool flag2 = !flag;
bool result;
if (flag2)
{
result = flag;
}
else
{
base.MatWcsToPalette = matWcsToPalette;
result = true;
}
return(result);
}
// Token: 0x06000114 RID: 276 RVA: 0x00009B98 File Offset: 0x00007D98
internal static void AddCutout(ItUniWrapperImpl.CutoutData data, IEnumerable <ItUniWrapperImpl.Point2D> points)
{
ItDebug.assert(points.any <ItUniWrapperImpl.Point2D>(), "Can not handle empty List of Points");
ItUniWrapperImpl.Point2D[] array = points.ToArray <ItUniWrapperImpl.Point2D>();
data.countOfPoints = (ushort)array.Length;
ItUniWrapperImpl.addCutout(data, array);
}
// Token: 0x06000113 RID: 275 RVA: 0x00009B5C File Offset: 0x00007D5C
internal static void AddFreeFormRodstock(ItUniWrapperImpl.RodstockData data, IEnumerable <ItUniWrapperImpl.FreeFormSegment> segments)
{
ItDebug.assert(segments.any <ItUniWrapperImpl.FreeFormSegment>(), "Can not handle empty List of FreeFormSegments");
ItUniWrapperImpl.FreeFormSegment[] array = segments.ToArray <ItUniWrapperImpl.FreeFormSegment>();
data.numberOfFreeFormSegments = (ushort)array.Length;
ItUniWrapperImpl.addFreeFormRodstock(data, array);
}
// Token: 0x06000117 RID: 279 RVA: 0x00009C10 File Offset: 0x00007E10
public static void SetSlabInfoFields(string info1, string info2, string info3, string info4)
{
info1 = (info1 ?? string.Empty);
info2 = (info2 ?? string.Empty);
info3 = (info3 ?? string.Empty);
info4 = (info4 ?? string.Empty);
ItUniWrapperImpl.setSlabInfoFields(info1, info2, info3, info4);
}
// Token: 0x06000115 RID: 277 RVA: 0x00009BD4 File Offset: 0x00007DD4
internal static void AddContour(List <ItUniWrapperImpl.Point2D> points)
{
ItDebug.assert(points.any <ItUniWrapperImpl.Point2D>(), "Can not handle empty List of Points");
ItUniWrapperImpl.Point2D[] array = points.ToArray();
int countOfPoints = array.Length;
ItUniWrapperImpl.addContour(countOfPoints, array);
}
// Token: 0x0600023D RID: 573 RVA: 0x0000F938 File Offset: 0x0000DB38
internal override void WriteToUnitechnik(ICollection <ExportReinfData> exportedElements)
{
ItUniWrapperImpl.AddStandardFabricSheet(this._type, this.Count, this.Weight, this._name);
exportedElements.Add(new ExportReinfData
{
Id = base.FabricSheet.Id,
ExportedAs = ExportReinfData.ExportType.AsExtIron
});
}
// Token: 0x06000270 RID: 624 RVA: 0x0000FE94 File Offset: 0x0000E094
public void sendToUniwrapper()
{
ItDebug.assert(this.status == WireItem.Status.RelativeToSteelmat, "Can't write wire items before their coordinates are transformed to be relative to steelmats origin");
int diameter = CNCDataBase.convertToMM(this.WireDiameter);
int length = CNCDataBase.convertToMM(this.Length);
int[] startpoint = CNCDataBase.toPointArray(this.StartPoint);
int pitch = CNCDataBase.convertToMM((double)this.Pitch);
int spacerStartpoint = CNCDataBase.convertToMM((double)this.SpacerStartPoint);
int spacerPitch = CNCDataBase.convertToMM((double)this.SpacerPitch);
ItUniWrapperImpl.AddCFSRodstock(this.ReinforcementType, this.SteelQuality, this.NumberOfIrons, diameter, length, startpoint, pitch, this.Angle, this.ArticleNumber, this.AutomaticProduction, this.SpacerType, spacerStartpoint, spacerPitch, this.AdditionalStore);
}
// Token: 0x06000112 RID: 274 RVA: 0x00009B24 File Offset: 0x00007D24
internal static int AddStandardFabricSheet(int type, int count, double weightKg, string sheetName)
{
ItDebug.assert(sheetName != null, "cant handle null as sheetname");
bool flag = sheetName == null;
if (flag)
{
throw new ArgumentException();
}
return(ItUniWrapperImpl.addStandardFabricSheet(type, count, weightKg, sheetName));
}
// Token: 0x0600010D RID: 269 RVA: 0x00009714 File Offset: 0x00007914
internal static int EndDocument(string strFilename)
{
ItDebug.assert(!string.IsNullOrWhiteSpace(strFilename), "Failure in: ");
bool flag = string.IsNullOrWhiteSpace(strFilename);
if (flag)
{
throw new ArgumentException();
}
return(ItUniWrapperImpl.endDocument(strFilename));
}
// Token: 0x060001D8 RID: 472 RVA: 0x0000CA88 File Offset: 0x0000AC88
private void UnitechnikWriteRebarAsFreeForm()
{
ItDebug.assert(base.IronSetsSchematic.any <List <ItGeCurve3d> >() && base.IronSetsSchematic[0].Count > 1, "Do not call this method for anything but bending forms.");
ItUniWrapperImpl.RodstockData data = default(ItUniWrapperImpl.RodstockData);
List <ItGeCurve3d> list = base.IronSetsSchematic[0];
ItGeVector3d normal;
short unitechnikAngleOfFreeForm = base.GetUnitechnikAngleOfFreeForm(list[0], out normal);
int num;
double dValue;
this.GetSpacingAndCountForUnitechnik(unitechnikAngleOfFreeForm, out num, out dValue);
int freeFormLength = SteelGroupElementRebar.GetFreeFormLength(list);
ItGePoint3d startPoint = base.GetStartPoint(base.IronSetsSchematic);
data.length = (uint)freeFormLength;
data.startAngle = unitechnikAngleOfFreeForm;
data.artNr = string.Empty;
data.autoProd = 0;
data.diameter = (ushort)CNCDataBase.convertToMM(base.RebarBarType.BarDiameter);
data.flexFormNumber = 0;
data.formType = 2;
data.hasSpacers = 0;
data.hasWielding = 0;
data.installationHeight = (uint)CNCDataBase.convertToMM(startPoint.z);
data.number = (ushort)num;
data.pitch = CNCDataBase.convertToMM(dValue);
data.pitchSpacer = 0u;
data.startingPointSpacer = 0u;
data.reinfType = (byte)base.CNCReinfTypeValue;
data.steelQuality = SteelGroupElementRebarBase.GetSteelQuality(base.RebarBarType);
data.xcoord = CNCDataBase.convertToMM(startPoint.x);
data.ycoord = CNCDataBase.convertToMM(startPoint.y);
List <ItUniWrapperImpl.FreeFormSegment> list2 = new List <ItUniWrapperImpl.FreeFormSegment>();
int num2;
for (int i = 0; i < list.Count; i = num2 + 1)
{
ItGeCurve3d itGeCurve3d = list[i];
ItGeCurve3d nextCurve = list.ElementAtOrDefault(i + 1);
short unitechnikAngleOfNextSegment = this.GetUnitechnikAngleOfNextSegment(itGeCurve3d, nextCurve, normal);
list2.Add(new ItUniWrapperImpl.FreeFormSegment
{
length = (uint)CNCDataBase.convertToMM(itGeCurve3d.len),
angle = unitechnikAngleOfNextSegment
});
num2 = i;
}
ItUniWrapperImpl.AddFreeFormRodstock(data, list2);
}
// Token: 0x06000110 RID: 272 RVA: 0x00009848 File Offset: 0x00007A48
internal static int AddSteelmat(string matName, int maxLen, int maxWidth, int toTurn, int stopOnTurn, int matType, int[] pos)
{
ItDebug.assert(matName != null, "cant handle null as steelmat name");
ItDebug.assert(maxLen > 0 && maxWidth > 0, "cant have negative length or width");
ItDebug.assert(toTurn == 0 || toTurn == 1, "toTurn must be 0 or 1");
ItDebug.assert(stopOnTurn == 0 || stopOnTurn == 1, "stopOnTurn must be 0 or 1");
ItDebug.assert((matType >= 0 && matType <= 4) || matType == 8, "invalid mattype");
ItDebug.assert(pos.Length == 3, "position must be a 3d-point");
bool flag = matName == null;
if (flag)
{
throw new ArgumentException();
}
bool flag2 = maxLen <= 0 || maxWidth <= 0;
if (flag2)
{
throw new ArgumentException();
}
bool flag3 = toTurn != 0 && toTurn != 1;
if (flag3)
{
throw new ArgumentException();
}
bool flag4 = stopOnTurn != 0 && stopOnTurn != 1;
if (flag4)
{
throw new ArgumentException();
}
bool flag5 = (matType < 0 || matType > 4) && matType != 8;
if (flag5)
{
throw new ArgumentException();
}
bool flag6 = pos.Length != 3;
if (flag6)
{
throw new ArgumentException();
}
matName = ((matName.Length > 20) ? matName.Substring(0, 20) : matName);
return(ItUniWrapperImpl.addSteelmat(matName, maxLen, maxWidth, toTurn, stopOnTurn, matType, pos));
}
// Token: 0x060001A1 RID: 417 RVA: 0x0000B7F8 File Offset: 0x000099F8
internal override void WriteToUnitechnik(ICollection <ExportReinfData> exportedElements)
{
int[] pos = CNCDataBase.toPointArray(base.PosPalette);
int maxLen = CNCDataBase.convertToMM(this._maxLength);
int maxWidth = CNCDataBase.convertToMM(this._maxWidth);
ItUniWrapperImpl.AddSteelmat(this._cfsName, maxLen, maxWidth, this._toTurn, this._stopOnTurn, this._matType, pos);
foreach (WireItem wireItem in base.WireItemsMajor.Union(base.WireItemsMinor))
{
wireItem.sendToUniwrapper();
}
exportedElements.Add(new ExportReinfData
{
Id = base.FabricSheet.Id,
ExportedAs = ExportReinfData.ExportType.AsCFS
});
}
// Token: 0x0600010C RID: 268 RVA: 0x00009668 File Offset: 0x00007868
internal static int StartDocument(int iProduct, int iElementId, ProjectCoordinates projectCoordinates, short iVersion, string strElemName, double dTotalArea, bool clearDocument)
{
ItDebug.assert(iProduct >= 0 && iProduct < 100, "product type must be between 0 and 99");
ItDebug.assert(iElementId >= 0 || iElementId < 999, "elementId must be between 0 and 999");
bool flag = iProduct < 0 || iProduct >= 100;
if (flag)
{
throw new ArgumentOutOfRangeException();
}
bool flag2 = iElementId < 0 && iElementId >= 999;
if (flag2)
{
throw new ArgumentOutOfRangeException();
}
strElemName = ((strElemName.Length > 30) ? strElemName.Substring(0, 30) : strElemName);
double[] array = projectCoordinates.getArray();
return(ItUniWrapperImpl.startOrder(iProduct, iElementId, array, iVersion, strElemName, dTotalArea, clearDocument));
}
// Token: 0x0600010F RID: 271 RVA: 0x000097CC File Offset: 0x000079CC
internal static int AddGirder(string girderName, int[] iParameter)
{
ItDebug.assert(girderName != null, "cant handle null as mountPartName");
ItDebug.assert(iParameter.Length % 4 == 2, "parameter array for mount parts must be array of pairs of 4 elements, plus two (the first two)");
bool flag = girderName == null;
if (flag)
{
throw new ArgumentException();
}
bool flag2 = iParameter.Length % 4 != 2;
if (flag2)
{
throw new ArgumentException();
}
girderName = ((girderName.Length > 10) ? girderName.Substring(0, 10) : girderName);
int iCount = iParameter.Length;
return(ItUniWrapperImpl.addSet(5, girderName, iCount, iParameter));
}
// Token: 0x06000005 RID: 5 RVA: 0x000023A8 File Offset: 0x000005A8
private static string ExportReinforcementToUnitechnik(AssemblyInstance assembly, FileFormat fileFormat, ICollection <ExportReinfData> exportedElements, Func <Element, bool> filter)
{
ICamExportIntOptions options = new CamExporter.CamExportOptionsOnlyFileFormat(fileFormat);
ItMachineDataBase cncdocCreator = ItCNCDataFactory.getCNCDocCreator(assembly, options);
cncdocCreator.InitializeFromAssembly(assembly);
ItGeMatrix3d matWcsToPalette = cncdocCreator.MatWcsToPalette;
ItMachineDataBase.CNCElementData cncelementData = new ItMachineDataBase.CNCElementData();
ILookup <SteelGroup, SteelGroupElement> steelGroups;
using (ItTransaction itTransaction = ItTransactionManager.Instance.start(assembly.Document, "RevitPrecast Internal Transaction", null))
{
ReinfSorter reinfSorter = new ReinfSorter(assembly, cncelementData, matWcsToPalette, filter);
reinfSorter.SortElements();
steelGroups = reinfSorter.GetSteelGroups();
itTransaction.rollback("Planned rollback.");
}
short iVersion = (fileFormat == FileFormat.Unitechnik52) ? (short)502 : (short)600;
ItUniWrapperImpl.StartDocument(1, 1, ProjectCoordinates.Empty, iVersion, "", 1.0, true);
ItUniWrapperImpl.AddLayer(0, 1.0, 1.0, 1.0, "x");
foreach (IGrouping <SteelGroup, SteelGroupElement> grouping in steelGroups)
{
grouping.Key.WriteUnitechnik(exportedElements);
}
ItMachineDataBase.UnitechnikWriteMountingPartData(cncelementData);
ItMachineDataBase.UnitechnikWriteBRGirdersData(cncelementData);
string fullReinforcementString = ItUniWrapperImpl.GetFullReinforcementString();
bool flag = fullReinforcementString.Contains("ERROR");
if (flag)
{
throw new CamExportException(fullReinforcementString);
}
return(fullReinforcementString);
}
// Token: 0x0600011B RID: 283 RVA: 0x00009CE0 File Offset: 0x00007EE0
public static void SetDoubleWallGap(int doubleWallGap)
{
ItUniWrapperImpl.setDoubleWallGap(doubleWallGap);
}
// Token: 0x06000116 RID: 278 RVA: 0x00009C06 File Offset: 0x00007E06
internal static void AddStraightRodstock(ItUniWrapperImpl.RodstockData data)
{
ItUniWrapperImpl.addStraightRodstock(data);
}
// Token: 0x06000221 RID: 545 RVA: 0x0000EEA0 File Offset: 0x0000D0A0
protected void UnitechnikAddStraightBars(List <List <ItGeCurve3d> > arrayIrons, ElementId id)
{
List <ItGeCurve3d> list = arrayIrons.FirstOrDefault <List <ItGeCurve3d> >();
bool flag = list == null;
if (flag)
{
ItFailures.PostFailure(ItFailures.CAMObjectWithoutValidGeometry, id);
}
else
{
ItGeCurve3d itGeCurve3d = list.FirstOrDefault <ItGeCurve3d>();
bool flag2 = itGeCurve3d == null;
if (flag2)
{
ItFailures.PostFailure(ItFailures.CAMObjectWithoutValidGeometry, id);
}
else
{
ItGePoint3d itGePoint3d;
itGeCurve3d.hasStartPoint(out itGePoint3d);
ItGeVector3d itGeVector3d;
short unitechnikAngleOfFreeForm = this.GetUnitechnikAngleOfFreeForm(itGeCurve3d, out itGeVector3d);
bool flag3 = arrayIrons.Count > 1;
int num;
double num2;
if (flag3)
{
this.GetSpacingAndCountForUnitechnik(unitechnikAngleOfFreeForm, out num, out num2);
}
else
{
ItGeVector3d kOrigin = ItGeVector3d.kOrigin;
num2 = 0.0;
num = 1;
}
uint length = (uint)CNCDataBase.convertToMM(itGeCurve3d.len);
ItUniWrapperImpl.RodstockData data = new ItUniWrapperImpl.RodstockData
{
length = length,
startAngle = unitechnikAngleOfFreeForm,
artNr = string.Empty,
autoProd = 0,
diameter = (ushort)CNCDataBase.convertToMM(this.RebarBarType.BarDiameter),
flexFormNumber = 0,
formType = 0,
hasSpacers = 0,
hasWielding = 0,
pitchSpacer = 0u,
startingPointSpacer = 0u,
reinfType = (byte)base.CNCReinfTypeValue,
steelQuality = SteelGroupElementRebarBase.GetSteelQuality(this.RebarBarType),
xcoord = CNCDataBase.convertToMM(itGePoint3d.x),
ycoord = CNCDataBase.convertToMM(itGePoint3d.y),
installationHeight = (uint)CNCDataBase.convertToMM(itGePoint3d.z),
number = (ushort)(num2.Ne(0.0, -1.0) ? num : 1),
pitch = CNCDataBase.convertToMM(num2)
};
ItUniWrapperImpl.AddStraightRodstock(data);
bool flag4 = num2.Eq(0.0, -1.0) && num > 1;
if (flag4)
{
int num3;
for (int i = 1; i < arrayIrons.Count; i = num3 + 1)
{
itGeCurve3d = arrayIrons[i].FirstOrDefault <ItGeCurve3d>();
bool flag5 = itGeCurve3d == null;
if (!flag5)
{
itGeCurve3d.hasStartPoint(out itGePoint3d);
data.xcoord = CNCDataBase.convertToMM(itGePoint3d.x);
data.ycoord = CNCDataBase.convertToMM(itGePoint3d.y);
ItUniWrapperImpl.AddStraightRodstock(data);
}
num3 = i;
}
}
}
}
}
// Token: 0x060000E4 RID: 228 RVA: 0x00009110 File Offset: 0x00007310
protected override void UnitechnikWriteAdditionalSlabData(AssemblyInstance assemblyInstance)
{
string strandsTypeName = this.GetStrandsTypeName(assemblyInstance);
ItUniWrapperImpl.SetSlabInfoFields(strandsTypeName, string.Empty, string.Empty, string.Empty);
}
// Token: 0x06000118 RID: 280 RVA: 0x00009C4D File Offset: 0x00007E4D
internal static void SetProjectData(CNCProjectData data)
{
ItDebug.assert(data.CheckNoNullFields(), "no fields must be null in the CNCProjectData, use string.Empty instead");
ItUniWrapperImpl.setProjectData(data);
}
// Token: 0x06000119 RID: 281 RVA: 0x00009C68 File Offset: 0x00007E68
public static void AddLayer(int layerType, double dThickness, double dUnitWeight, double dVolume, string sConcreteQuality)
{
ItDebug.assert(sConcreteQuality != null, "No strings should be null when being sent to UniWrapper");
sConcreteQuality = (sConcreteQuality ?? string.Empty);
ItUniWrapperImpl.addLayer(layerType, dThickness, dUnitWeight, dVolume, sConcreteQuality);
}
// Token: 0x0600011C RID: 284 RVA: 0x00009CEC File Offset: 0x00007EEC
public static string GetFullReinforcementString()
{
return(ItUniWrapperImpl.getFullReinforcementString());
}
// Token: 0x06000111 RID: 273 RVA: 0x00009990 File Offset: 0x00007B90
internal static int AddCFSRodstock(int reinfType, string steelQuality, int numberOfIrons, int diameter, int length, int[] startpoint, int pitch, int angle, string articleNumber, int automaticProduction, int spacerType, int spacerStartpoint, int spacerPitch, int additionalStore)
{
ItDebug.assert(reinfType >= 0 && reinfType < 9, "invalid reinfType");
ItDebug.assert(steelQuality != null, "cant handle null as steel quality");
ItDebug.assert(numberOfIrons > 0, "cant handle 0 or negative iron number");
ItDebug.assert(diameter > 0, "cant handle 0 or negative diameter");
ItDebug.assert(length > 0, "cant handle 0 or negative iron length");
ItDebug.assert(startpoint.Length == 3, "Startpoint must be a 3d point");
ItDebug.assert(articleNumber != null, "cant handle null as article number");
ItDebug.assert(automaticProduction == 0 || automaticProduction == 1, "automaticProduction must be 0 or 1");
ItDebug.assert(additionalStore >= 0 && additionalStore <= 112, "additional store contains invalid flags");
bool flag = reinfType < 0 || reinfType >= 9;
if (flag)
{
throw new ArgumentException();
}
bool flag2 = steelQuality == null;
if (flag2)
{
throw new ArgumentException();
}
bool flag3 = numberOfIrons <= 0;
if (flag3)
{
throw new ArgumentException();
}
bool flag4 = diameter <= 0;
if (flag4)
{
throw new ArgumentException();
}
bool flag5 = length <= 0;
if (flag5)
{
throw new ArgumentException();
}
bool flag6 = startpoint.Length != 3;
if (flag6)
{
throw new ArgumentException();
}
bool flag7 = articleNumber == null;
if (flag7)
{
throw new ArgumentException();
}
bool flag8 = automaticProduction != 0 && automaticProduction != 1;
if (flag8)
{
throw new ArgumentException();
}
bool flag9 = additionalStore < 0 || additionalStore > 112;
if (flag9)
{
throw new ArgumentException();
}
return(ItUniWrapperImpl.addCFSRodstock(reinfType, steelQuality, numberOfIrons, diameter, length, startpoint, pitch, angle, articleNumber, automaticProduction, spacerType, spacerStartpoint, spacerPitch, additionalStore));
}
