// Token: 0x0600001B RID: 27 RVA: 0x00002D54 File Offset: 0x00000F54
public static int[] toPointArray(ItGePoint3d point)
{
return(new int[]
{
CNCDataBase.convertToMM(point.x),
CNCDataBase.convertToMM(point.y),
CNCDataBase.convertToMM(point.z)
});
}
// Token: 0x06000270 RID: 624 RVA: 0x0000FE94 File Offset: 0x0000E094
public void sendToUniwrapper()
{
ItDebug.assert(this.status == WireItem.Status.RelativeToSteelmat, "Can't write wire items before their coordinates are transformed to be relative to steelmats origin");
int diameter = CNCDataBase.convertToMM(this.WireDiameter);
int length = CNCDataBase.convertToMM(this.Length);
int[] startpoint = CNCDataBase.toPointArray(this.StartPoint);
int pitch = CNCDataBase.convertToMM((double)this.Pitch);
int spacerStartpoint = CNCDataBase.convertToMM((double)this.SpacerStartPoint);
int spacerPitch = CNCDataBase.convertToMM((double)this.SpacerPitch);
ItUniWrapperImpl.AddCFSRodstock(this.ReinforcementType, this.SteelQuality, this.NumberOfIrons, diameter, length, startpoint, pitch, this.Angle, this.ArticleNumber, this.AutomaticProduction, this.SpacerType, spacerStartpoint, spacerPitch, this.AdditionalStore);
}
// Token: 0x060001D8 RID: 472 RVA: 0x0000CA88 File Offset: 0x0000AC88
private void UnitechnikWriteRebarAsFreeForm()
{
ItDebug.assert(base.IronSetsSchematic.any <List <ItGeCurve3d> >() && base.IronSetsSchematic[0].Count > 1, "Do not call this method for anything but bending forms.");
ItUniWrapperImpl.RodstockData data = default(ItUniWrapperImpl.RodstockData);
List <ItGeCurve3d> list = base.IronSetsSchematic[0];
ItGeVector3d normal;
short unitechnikAngleOfFreeForm = base.GetUnitechnikAngleOfFreeForm(list[0], out normal);
int num;
double dValue;
this.GetSpacingAndCountForUnitechnik(unitechnikAngleOfFreeForm, out num, out dValue);
int freeFormLength = SteelGroupElementRebar.GetFreeFormLength(list);
ItGePoint3d startPoint = base.GetStartPoint(base.IronSetsSchematic);
data.length = (uint)freeFormLength;
data.startAngle = unitechnikAngleOfFreeForm;
data.artNr = string.Empty;
data.autoProd = 0;
data.diameter = (ushort)CNCDataBase.convertToMM(base.RebarBarType.BarDiameter);
data.flexFormNumber = 0;
data.formType = 2;
data.hasSpacers = 0;
data.hasWielding = 0;
data.installationHeight = (uint)CNCDataBase.convertToMM(startPoint.z);
data.number = (ushort)num;
data.pitch = CNCDataBase.convertToMM(dValue);
data.pitchSpacer = 0u;
data.startingPointSpacer = 0u;
data.reinfType = (byte)base.CNCReinfTypeValue;
data.steelQuality = SteelGroupElementRebarBase.GetSteelQuality(base.RebarBarType);
data.xcoord = CNCDataBase.convertToMM(startPoint.x);
data.ycoord = CNCDataBase.convertToMM(startPoint.y);
List <ItUniWrapperImpl.FreeFormSegment> list2 = new List <ItUniWrapperImpl.FreeFormSegment>();
int num2;
for (int i = 0; i < list.Count; i = num2 + 1)
{
ItGeCurve3d itGeCurve3d = list[i];
ItGeCurve3d nextCurve = list.ElementAtOrDefault(i + 1);
short unitechnikAngleOfNextSegment = this.GetUnitechnikAngleOfNextSegment(itGeCurve3d, nextCurve, normal);
list2.Add(new ItUniWrapperImpl.FreeFormSegment
{
length = (uint)CNCDataBase.convertToMM(itGeCurve3d.len),
angle = unitechnikAngleOfNextSegment
});
num2 = i;
}
ItUniWrapperImpl.AddFreeFormRodstock(data, list2);
}
// Token: 0x060001A1 RID: 417 RVA: 0x0000B7F8 File Offset: 0x000099F8
internal override void WriteToUnitechnik(ICollection <ExportReinfData> exportedElements)
{
int[] pos = CNCDataBase.toPointArray(base.PosPalette);
int maxLen = CNCDataBase.convertToMM(this._maxLength);
int maxWidth = CNCDataBase.convertToMM(this._maxWidth);
ItUniWrapperImpl.AddSteelmat(this._cfsName, maxLen, maxWidth, this._toTurn, this._stopOnTurn, this._matType, pos);
foreach (WireItem wireItem in base.WireItemsMajor.Union(base.WireItemsMinor))
{
wireItem.sendToUniwrapper();
}
exportedElements.Add(new ExportReinfData
{
Id = base.FabricSheet.Id,
ExportedAs = ExportReinfData.ExportType.AsCFS
});
}
// Token: 0x06000238 RID: 568 RVA: 0x0000F724 File Offset: 0x0000D924
internal override void WriteToPXML(ItSteel steelBlock, ICollection <ExportReinfData> exportedElements)
{
ItSteelExt itSteelExt = new ItSteelExt();
itSteelExt.type = "01";
itSteelExt.Info = CNCDataBase.paddedInt5(this.Count) + " " + this.Weight.ToString("000.000", CultureInfo.InvariantCulture);
FabricSheetType sheetType = SteelGroupElementMeshBase.GetSheetType(base.FabricSheet.Element);
itSteelExt.SheetType = (((sheetType != null) ? sheetType.Name : null) ?? string.Empty);
itSteelExt.Count = this.Count;
itSteelExt.Weight = Math.Round(this.Weight, 3);
steelBlock.steelExtList.Add(itSteelExt);
exportedElements.Add(new ExportReinfData
{
Id = base.FabricSheet.Id,
ExportedAs = ExportReinfData.ExportType.AsExtIron
});
}
// Token: 0x06000044 RID: 68 RVA: 0x00003DE8 File Offset: 0x00001FE8
public void setParametersForUnitechnik(int[] iParameters, int count, double offset, double x, double y)
{
bool flag = iParameters.isNull() || iParameters.Length != 10;
if (flag)
{
ItDebug.assert(false, "Input parameter ");
}
else
{
ItBracedGirderData.DataInFeet cncdata = this.GetCNCData(count, offset);
iParameters[0] = cncdata.Count;
iParameters[1] = CNCDataBase.convertToMM(cncdata.Length);
iParameters[2] = CNCDataBase.convertToMM(x);
iParameters[3] = CNCDataBase.convertToMM(y);
iParameters[4] = CNCDataBase.convertToMM(cncdata.Offset);
iParameters[5] = (int)ItAngle.toDegree(cncdata.Angle);
iParameters[6] = CNCDataBase.convertToMM(cncdata.Height);
iParameters[7] = CNCDataBase.convertToMM(cncdata.Diameter);
iParameters[8] = (int)(cncdata.Weight * 1000.0);
iParameters[9] = CNCDataBase.convertToMM(cncdata.InstallationHeight);
}
}
// Token: 0x06000271 RID: 625 RVA: 0x0000FF44 File Offset: 0x0000E144
public void writeToUnitechnik(TextWriter writer, int ironNumber)
{
ItDebug.assert(this.status == WireItem.Status.RelativeToSteelmat, "Can't write wire items before their coordinates are transformed to be relative to steelmats origin");
writer.Write(CNCDataBase.paddedInt3(ironNumber) + " ");
writer.Write("000 ");
writer.Write(CNCDataBase.paddedInt(this.ReinforcementType, 1, false) + " ");
writer.Write(this.SteelQuality + " ");
writer.Write(CNCDataBase.paddedInt(this.NumberOfIrons, 5, false) + " ");
writer.Write(CNCDataBase.toMMString3(this.WireDiameter) + " ");
writer.Write(CNCDataBase.toMMString5(this.Length, false) + " ");
writer.Write(CNCDataBase.toSignedMMString5(this.StartPoint.x) + " ");
writer.Write(CNCDataBase.toSignedMMString5(this.StartPoint.y) + " ");
writer.Write(CNCDataBase.toSignedMMString5((double)this.Pitch) + " ");
writer.Write(CNCDataBase.toMMString((double)this.Angle, 3, true) + " ");
writer.Write(CNCDataBase.padString(this.ArticleNumber, 10) + " ");
writer.Write(this.AutomaticProduction + writer.NewLine);
writer.Write(CNCDataBase.paddedInt3(this.SpacerType) + " ");
writer.Write("000 ");
writer.Write("000 ");
writer.Write(CNCDataBase.toMMString5((double)this.SpacerStartPoint, false) + " ");
writer.Write(CNCDataBase.toMMString5((double)this.SpacerPitch, false) + " ");
writer.Write(CNCDataBase.toMMString5(this.StartPoint.z, false) + " ");
writer.Write(this.AdditionalStore + writer.NewLine);
}
// Token: 0x06000221 RID: 545 RVA: 0x0000EEA0 File Offset: 0x0000D0A0
protected void UnitechnikAddStraightBars(List <List <ItGeCurve3d> > arrayIrons, ElementId id)
{
List <ItGeCurve3d> list = arrayIrons.FirstOrDefault <List <ItGeCurve3d> >();
bool flag = list == null;
if (flag)
{
ItFailures.PostFailure(ItFailures.CAMObjectWithoutValidGeometry, id);
}
else
{
ItGeCurve3d itGeCurve3d = list.FirstOrDefault <ItGeCurve3d>();
bool flag2 = itGeCurve3d == null;
if (flag2)
{
ItFailures.PostFailure(ItFailures.CAMObjectWithoutValidGeometry, id);
}
else
{
ItGePoint3d itGePoint3d;
itGeCurve3d.hasStartPoint(out itGePoint3d);
ItGeVector3d itGeVector3d;
short unitechnikAngleOfFreeForm = this.GetUnitechnikAngleOfFreeForm(itGeCurve3d, out itGeVector3d);
bool flag3 = arrayIrons.Count > 1;
int num;
double num2;
if (flag3)
{
this.GetSpacingAndCountForUnitechnik(unitechnikAngleOfFreeForm, out num, out num2);
}
else
{
ItGeVector3d kOrigin = ItGeVector3d.kOrigin;
num2 = 0.0;
num = 1;
}
uint length = (uint)CNCDataBase.convertToMM(itGeCurve3d.len);
ItUniWrapperImpl.RodstockData data = new ItUniWrapperImpl.RodstockData
{
length = length,
startAngle = unitechnikAngleOfFreeForm,
artNr = string.Empty,
autoProd = 0,
diameter = (ushort)CNCDataBase.convertToMM(this.RebarBarType.BarDiameter),
flexFormNumber = 0,
formType = 0,
hasSpacers = 0,
hasWielding = 0,
pitchSpacer = 0u,
startingPointSpacer = 0u,
reinfType = (byte)base.CNCReinfTypeValue,
steelQuality = SteelGroupElementRebarBase.GetSteelQuality(this.RebarBarType),
xcoord = CNCDataBase.convertToMM(itGePoint3d.x),
ycoord = CNCDataBase.convertToMM(itGePoint3d.y),
installationHeight = (uint)CNCDataBase.convertToMM(itGePoint3d.z),
number = (ushort)(num2.Ne(0.0, -1.0) ? num : 1),
pitch = CNCDataBase.convertToMM(num2)
};
ItUniWrapperImpl.AddStraightRodstock(data);
bool flag4 = num2.Eq(0.0, -1.0) && num > 1;
if (flag4)
{
int num3;
for (int i = 1; i < arrayIrons.Count; i = num3 + 1)
{
itGeCurve3d = arrayIrons[i].FirstOrDefault <ItGeCurve3d>();
bool flag5 = itGeCurve3d == null;
if (!flag5)
{
itGeCurve3d.hasStartPoint(out itGePoint3d);
data.xcoord = CNCDataBase.convertToMM(itGePoint3d.x);
data.ycoord = CNCDataBase.convertToMM(itGePoint3d.y);
ItUniWrapperImpl.AddStraightRodstock(data);
}
num3 = i;
}
}
}
}
}
// Token: 0x06000272 RID: 626 RVA: 0x0001017D File Offset: 0x0000E37D
public static void writeHeaderToUnitechnik(TextWriter writer, int version, int numberOfIronSets)
{
writer.WriteLine("RODSTOCK");
writer.WriteLine(CNCDataBase.paddedInt(version, 3, false));
writer.WriteLine(CNCDataBase.paddedInt3(numberOfIronSets));
}
// Token: 0x06000013 RID: 19 RVA: 0x00002C28 File Offset: 0x00000E28
public static string paddedInt3(int value)
{
return(CNCDataBase.paddedInt(value, 3, false));
}
// Token: 0x06000018 RID: 24 RVA: 0x00002CBC File Offset: 0x00000EBC
public static string toMMString3(double value)
{
return(CNCDataBase.toMMString(value, 3, false));
}
// Token: 0x06000017 RID: 23 RVA: 0x00002CA0 File Offset: 0x00000EA0
public static string toSignedMMString5(double value)
{
return(CNCDataBase.toSignedMMString(value, 5));
}
// Token: 0x06000016 RID: 22 RVA: 0x00002C84 File Offset: 0x00000E84
public static string toMMString5(double value, bool sign = false)
{
return(CNCDataBase.toMMString(value, 5, sign));
}
// Token: 0x06000015 RID: 21 RVA: 0x00002C68 File Offset: 0x00000E68
public static string toSignedMMString(double value, int digits)
{
return(CNCDataBase.toMMString(value, digits, true));
}
// Token: 0x06000014 RID: 20 RVA: 0x00002C44 File Offset: 0x00000E44
public static string toMMString(double value, int digits, bool sign = false)
{
int value2 = CNCDataBase.convertToMM(value);
return(CNCDataBase.paddedInt(value2, digits, sign));
}
// Token: 0x060001DA RID: 474 RVA: 0x0000CCC4 File Offset: 0x0000AEC4
private static int GetFreeFormLength(List <ItGeCurve3d> firstSet)
{
double dValue = firstSet.Sum((ItGeCurve3d curve) => curve.len);
return(CNCDataBase.convertToMM(dValue));
}
// Token: 0x0600001C RID: 28 RVA: 0x00002D98 File Offset: 0x00000F98
public static int ConvertToMeter(double value)
{
return(CNCDataBase.convertToMM(value / 1000.0));
}
