/// <summary>
/// 计算两轨迹点之间所花的时间
/// </summary>
/// <param name="startPoint">开始点</param>
/// <param name="endPoint">终止点</param>
/// <returns></returns>
private double ComputeTotalTime(TrackPoint startPoint, TrackPoint endPoint)
{
TimeSpan oTime = endPoint.TimeStamp.Subtract(startPoint.TimeStamp);
return(Math.Abs(oTime.TotalMilliseconds));
}
/////// <summary>
/////// 对轨迹点集合进行插值处理的核心代码
/////// </summary>
/////// <param name="allPoints">轨迹点集合</param>
/////// <param name="smoothFactor">平滑系数</param>
/////// <param name="speedScaleFactor">速度比例系数</param>
/////// <returns>轨迹段集合</returns>
////private TrackSegments InterpolateProcessCore(TrackPoints allPoints,InterpolateType interpolateType, double smoothFactor, double speedScaleFactor)
////{
//// TrackPoints oPointsResult = new TrackPoints();
//// TrackSegments oSegmentsInfos = new TrackSegments();
//// TrackSegments oSegmentsResult = new TrackSegments();
//// int iPointCount = 0;
//// iPointCount = allPoints.Count;
//// if (interpolateType == InterpolateType.LengthInterpolate)
//// {
//// double dSegLength = 0;
//// for (int i = 0; i < iPointCount - 1; i++)
//// {
//// dSegLength = ComputeDirectDistance(allPoints[i], allPoints[i + 1]);
//// this.DividSegmentByLength(ref oPointsResult, dSegLength, smoothFactor, speedScaleFactor, allPoints[i], allPoints[i + 1]);
//// }
//// }
//// else if (interpolateType == InterpolateType.TimeInterpolate)
//// {
//// double dUsedTime = 0;
//// for (int i = 0; i < iPointCount - 1; i++)
//// {
//// dUsedTime = ComputeTotalTime(allPoints[i], allPoints[i + 1]) / speedScaleFactor;
//// this.DividSegmentByTime(ref oPointsResult, dUsedTime, this._baseIntervalTime, allPoints[i], allPoints[i + 1]);
//// }
//// }
//// this.GetSegmentInfos(oPointsResult,ref oSegmentsResult);
//// return oSegmentsResult;
////}
///// <summary>
///// 对指点两个点之间的轨迹段进行分割(以长度为分割单元)
///// </summary>
///// <param name="trackPointsResult">分割后的轨迹点集合</param>
///// <param name="distanceBetweenTwoPoints">两点间的距离</param>
///// <param name="smoothFactor">平滑系数</param>
///// <param name="speedScaleFactor">速度比例系数</param>
///// <param name="StartTrackPoint">起始点</param>
///// <param name="EndTrackPoint">终止点</param>
//private void DividSegmentByLength(ref TrackPoints trackPointsResult, double distanceBetweenTwoPoints, double smoothFactor, double speedScaleFactor, TrackPoint StartTrackPoint, TrackPoint EndTrackPoint)
//{
// TrackPoint oStartPoint = new TrackPoint();
// TrackPoint oEndPoint = new TrackPoint();
// TrackSegment oSeg = new TrackSegment();
// oStartPoint.ID = StartTrackPoint.ID;
// oStartPoint.TimeStamp = StartTrackPoint.TimeStamp;
// oStartPoint.X = StartTrackPoint.X;
// oStartPoint.Y = StartTrackPoint.Y;
// oEndPoint.ID = EndTrackPoint.ID;
// oEndPoint.TimeStamp = EndTrackPoint.TimeStamp;
// oEndPoint.X = EndTrackPoint.X;
// oEndPoint.Y = EndTrackPoint.Y;
// //计算插入点的个数
// decimal decPointCount = smoothFactor == 0 ? 0 : Convert.ToDecimal(distanceBetweenTwoPoints / smoothFactor);
// int iInsertPointCount = Convert.ToInt32(Math.Round(decPointCount)) - 1;
// iInsertPointCount = iInsertPointCount < 0 ? 0 : iInsertPointCount;
// /*
// * 如果Ps > Pe
// * Px = Abs((Ps - Pe) / n ) * x + Ps
// *
// * 如果Ps < Pe
// * Px = Abs((Ps - Pe) / n ) * (n - 1 - x) + Pe
// *
// * 其中，n为分割段的个数（等于插入点个数加1），Ps起始端点，Pe终止端点
// * x为插入点的序号（靠近Ps的序号为1，靠近Pe的序号为n -1）,Px为某一插入点
// *
// * */
// double dSegLenthX = Math.Abs(((oStartPoint.X - oEndPoint.X) / (iInsertPointCount + 1)));
// double dSegLenthY = Math.Abs(((oStartPoint.Y - oEndPoint.Y) / (iInsertPointCount + 1)));
// TimeSpan oTimeInterval = new TimeSpan();
// //计算每个分割轨迹段所用的间隔时间
// speedScaleFactor = speedScaleFactor == 0 ? 1 : speedScaleFactor;
// oTimeInterval = oEndPoint.TimeStamp.Subtract(oStartPoint.TimeStamp);
// int iInterval = Convert.ToInt32((oTimeInterval.TotalMilliseconds / (iInsertPointCount + 1)) * speedScaleFactor);
// if (trackPointsResult.Count == 0)
// {
// oStartPoint.ID = trackPointsResult.Count + 1;
// trackPointsResult.Add(oStartPoint);
// }
// //将分割后的轨迹点添加到集合中去
// for (int i = 0; i < iInsertPointCount; i++)
// {
// TrackPoint oTempPoint = new TrackPoint();
// oTempPoint.ID = trackPointsResult.Count + 1;
// oTempPoint.TimeStamp = trackPointsResult[trackPointsResult.Count -1].TimeStamp.AddMilliseconds(iInterval);
// if (oStartPoint.X >= oEndPoint.X)
// {
// oTempPoint.X = dSegLenthX * (iInsertPointCount - i) + oEndPoint.X;
// }
// else
// {
// oTempPoint.X = dSegLenthX * (i + 1) + oStartPoint.X;
// }
// if (oStartPoint.Y >= oEndPoint.Y)
// {
// oTempPoint.Y = dSegLenthY * (iInsertPointCount - i) + oEndPoint.Y;
// }
// else
// {
// oTempPoint.Y = dSegLenthY * (i + 1) + oStartPoint.Y;
// }
// trackPointsResult.Add(oTempPoint);
// }
// oEndPoint.ID = trackPointsResult.Count + 1;
// oEndPoint.TimeStamp = trackPointsResult[trackPointsResult.Count - 1].TimeStamp.AddMilliseconds(iInterval);
// trackPointsResult.Add(oEndPoint);
//}
/// <summary>
/// 对指点两个点之间的轨迹段进行分割(以时间为分割单元)
/// </summary>
/// <param name="trackPointsResult">分割后的轨迹点集合</param>
/// <param name="totalTimeUsedBetweenTwoPoints">两点间的时间差</param>
/// <param name="smoothFactor">平滑系数</param>
/// <param name="speedScaleFactor">速度比例系数</param>
/// <param name="StartTrackPoint">起始点</param>
/// <param name="EndTrackPoint">终止点</param>
private void DividSegmentByTime(ref TrackPoints trackPointsResult, double totalTimeUsedBetweenTwoPoints, double smoothFactor, double intervalTime, TrackPoint StartTrackPoint, TrackPoint EndTrackPoint)
{
TrackPoint oStartPoint = new TrackPoint();
TrackPoint oEndPoint = new TrackPoint();
TrackSegment oSeg = new TrackSegment();
oStartPoint.ID = StartTrackPoint.ID;
oStartPoint.TimeStamp = StartTrackPoint.TimeStamp;
oStartPoint.X = StartTrackPoint.X;
oStartPoint.Y = StartTrackPoint.Y;
oEndPoint.ID = EndTrackPoint.ID;
oEndPoint.TimeStamp = EndTrackPoint.TimeStamp;
oEndPoint.X = EndTrackPoint.X;
oEndPoint.Y = EndTrackPoint.Y;
//计算插入点的个数
decimal decPointCount = intervalTime == 0 ? 1 : Convert.ToDecimal((totalTimeUsedBetweenTwoPoints) / intervalTime);
int iInsertPointCount = Convert.ToInt32(Math.Round(decPointCount)) - 1;
iInsertPointCount = iInsertPointCount < 0 ? 0 : iInsertPointCount;
/**************************************************************************************
* 如果Ps > Pe
* Px = Abs((Ps - Pe) / n ) * x + Ps
*
* 如果Ps < Pe
* Px = Abs((Ps - Pe) / n ) * (n - 1 - x) + Pe
*
* 其中，n为分割段的个数（等于插入点个数加1），Ps起始端点，Pe终止端点
* x为插入点的序号（靠近Ps的序号为1，靠近Pe的序号为n -1）,Px为某一插入点
*
***************************************************************************************/
double dSegLenthX = Math.Abs(((oStartPoint.X - oEndPoint.X) / (iInsertPointCount + 1)));
double dSegLenthY = Math.Abs(((oStartPoint.Y - oEndPoint.Y) / (iInsertPointCount + 1)));
if (trackPointsResult.Count == 0)
{
oStartPoint.ID = trackPointsResult.Count + 1;
trackPointsResult.Add(oStartPoint);
}
//将分割后的轨迹点添加到集合中去
for (int i = 0; i < iInsertPointCount; i++)
{
TrackPoint oTempPoint = new TrackPoint();
oTempPoint.ID = trackPointsResult.Count + 1;
oTempPoint.TimeStamp = trackPointsResult[trackPointsResult.Count - 1].TimeStamp.AddMilliseconds(intervalTime);
if (oStartPoint.X >= oEndPoint.X)
{
oTempPoint.X = dSegLenthX * (iInsertPointCount - i) + oEndPoint.X;
}
else
{
oTempPoint.X = dSegLenthX * (i + 1) + oStartPoint.X;
}
if (oStartPoint.Y >= oEndPoint.Y)
{
oTempPoint.Y = dSegLenthY * (iInsertPointCount - i) + oEndPoint.Y;
}
else
{
oTempPoint.Y = dSegLenthY * (i + 1) + oStartPoint.Y;
}
trackPointsResult.Add(oTempPoint);
}
oEndPoint.ID = trackPointsResult.Count + 1;
trackPointsResult.Add(oEndPoint);
}
