internal RSACryptoSystem( BackgroundWorker UseWorker, RSACryptoWorkerInfo UseWInfo )
{
Worker = UseWorker;
WorkerInfo = UseWInfo;
StartTime = new ECTime();
StartTime.SetToNow();
RngCsp = new RNGCryptoServiceProvider();
IntMath = new IntegerMath();
IntMathNewForP = new IntegerMathNew( IntMath );
IntMathNewForQ = new IntegerMathNew( IntMath );
Worker.ReportProgress( 0, IntMath.GetStatusString() );
Quotient = new Integer();
Remainder = new Integer();
PrimeP = new Integer();
PrimeQ = new Integer();
PrimePMinus1 = new Integer();
PrimeQMinus1 = new Integer();
PubKeyN = new Integer();
PubKeyExponent = new Integer();
PrivKInverseExponent = new Integer();
PrivKInverseExponentDP = new Integer();
PrivKInverseExponentDQ = new Integer();
QInv = new Integer();
PhiN = new Integer();
TestForDecrypt = new Integer();
M1ForInverse = new Integer();
M2ForInverse = new Integer();
HForQInv = new Integer();
M1MinusM2 = new Integer();
M1M2SizeDiff = new Integer();
PubKeyExponent.SetFromULong( PubKeyExponentUint );
}
public WebTCPClient( MainForm UseForm, TcpClient UseClient, string UseAddress )
{
MForm = UseForm;
RemoteAddress = UseAddress;
LastTransactTime = new ECTime();
LastTransactTime.SetToNow();
LinesDictionary = new Dictionary<string, string>();
if( UseClient == null )
Client = new TcpClient();
else
Client = UseClient;
try
{
NetStream = Client.GetStream();
}
catch( Exception Except )
{
MForm.ShowWebListenerFormStatus( "Exception in Creating the NetStream:" );
MForm.ShowWebListenerFormStatus( Except.Message );
NetStream = null;
return;
}
Client.ReceiveTimeout = 3 * 1000;
Client.SendTimeout = 3 * 1000;
Client.SendBufferSize = 1024 * 32;
}
internal TLSTCPClient( MainForm UseForm, TcpClient UseClient, string UseAddress )
{
MForm = UseForm;
RemoteAddress = UseAddress;
RawBuffer = new byte[RawBufferLength];
TLSOuterRecordBuffer = new byte[MaximumTLSRecordLength + 5]; // Plus 5 for the header.
LastTransactTime = new ECTime();
LastTransactTime.SetToNow();
if( UseClient == null )
Client = new TcpClient();
else
Client = UseClient;
try
{
NetStream = Client.GetStream();
}
catch( Exception Except )
{
MForm.ShowTLSListenerFormStatus( "Exception in Creating the NetStream:" );
MForm.ShowTLSListenerFormStatus( Except.Message );
NetStream = null;
return;
}
Client.ReceiveTimeout = 3 * 1000;
Client.SendTimeout = 3 * 1000;
Client.SendBufferSize = 1024 * 32;
}
internal SendCustomerTLSHandshake( BackgroundWorker UseWorker, BackWorkerInfo UseWInfo )
{
Worker = UseWorker;
WInfo = UseWInfo;
StartTime = new ECTime();
StartTime.SetToNow();
MsgClient = new CustomerTLSClient( WInfo.ServerIPOrDomainName );
}
internal CustomerTLSClient( string UseDomainName )
{
DomainName = UseDomainName;
RawBuffer = new byte[RawBufferLength];
TLSOuterRecordBuffer = new byte[MaximumTLSRecordLength];
Handshake = new ProcessHandshake( DomainName );
Client = new TcpClient();
Client.ReceiveTimeout = 15 * 1000;
Client.SendTimeout = 15 * 1000;
LastReadWriteTime = new ECTime();
LastReadWriteTime.SetToNow();
CryptoRand = new RNGCryptoServiceProvider();
}
internal FactorBase( QuadResWorkerInfo UseWInfo, BackgroundWorker UseWorker )
{
WInfo = UseWInfo;
Worker = UseWorker;
IntMath = new IntegerMath();
Quotient = new Integer();
Remainder = new Integer();
Product = new Integer();
ProductSqrRoot = new Integer();
EulerExponent = new Integer();
EulerResult = new Integer();
EulerModulus = new Integer();
OneMainFactor = new Integer();
ExpOneMainFactor = new ExponentVectorNumber( IntMath );
StartTime = new ECTime();
StartTime.SetToNow();
IntMath.SetFromString( Product, WInfo.PublicKeyModulus );
IntMath.SquareRoot( Product, ProductSqrRoot );
}
internal QuadResCombinatorics( QuadResWorkerInfo UseWInfo, BackgroundWorker UseWorker )
{
WInfo = UseWInfo;
Worker = UseWorker;
IntMath = new IntegerMath();
Quotient = new Integer();
Remainder = new Integer();
Product = new Integer();
SolutionP = new Integer();
SolutionQ = new Integer();
ToDivideMod32 = new Integer();
LastAccumulateValue = new Integer();
GetValueBasePart = new Integer();
StartTime = new ECTime();
StartTime.SetToNow();
IntMath.SetFromString( Product, WInfo.PublicKeyModulus );
QuadResDigitsArray = new QuadResDigitsRec[DigitsArrayLength];
}
internal TLSListenerForm( MainForm UseForm )
{
InitializeComponent();
MForm = UseForm;
DNSBackgroundWorker.WorkerReportsProgress = true;
DNSBackgroundWorker.WorkerSupportsCancellation = true;
ClientsLast = 0;
// It will resize this as it needs more.
Clients = new TLSClient[8];
Listener = new TcpListener( IPAddress.Any, 443 );
Listener.ExclusiveAddressUse = true;
ECTime RightNow = new ECTime();
RightNow.SetToNow();
UniqueEntityTag = RightNow.GetIndex(); // Start it with something new.
}
internal bool Connect()
{
ECTime RightNow = new ECTime();
RightNow.SetToNow();
// Worker.ReportProgress( 0, "Time: " + RightNow.ToLocalTimeString() );
if( !MsgClient.Connect( WInfo.ServerIPOrDomainName, 443 ))
{
string ErrorS = "Can't connect to the server for:\r\n" +
WInfo.ServerIPOrDomainName + "\r\n" +
MsgClient.GetStatusString() + "\r\n";
Worker.ReportProgress( 0, ErrorS );
Thread.Sleep( 1000 );
MsgClient.FreeEverything();
return false;
}
Worker.ReportProgress( 0, "Connected to the server at: " + WInfo.ServerIPOrDomainName );
return true;
}
internal string GetRandomDomainName()
{
try
{
ECTime OldDate = new ECTime();
OldDate.SetToNow();
OldDate.AddMinutes( -(60 * 24 * 90)); // Go back 90 days.
ulong OldDateIndex = OldDate.GetIndex();
// A limited while( true ) that won't go forever.
for( int Count = 0; Count < 10000; Count++ )
{
int Index = MForm.GetRandomNumber();
Index = Index % DomainX509RecArrayLast;
DomainX509Record Rec = DomainX509RecArray[Index];
if( Rec.GetModifyTimeIndex() > OldDateIndex )
continue; // Don't get a recently used one.
// if( anything else )
// continue;
// return "127.0.0.1"; // For testing with local loopback.
// return "promocodeclub.com"; // Good for testing X.509.
return "secure.ballantinecommunications.net";
// return "schneier.com"; // Bruce Schneier, the cryptographer.
// return "vantiv.com";
// return Rec.DomainName;
}
return ""; // It shouldn't get here.
}
catch( Exception Except )
{
MForm.ShowStatus( "Exception in GetRandomDomainName():" );
MForm.ShowStatus( Except.Message );
return "";
}
}
internal void AddToBadWebPageCount( string Address, string SentText )
{
try
{
IPStatusRec StatusRec;
if( IPsDictionary.ContainsKey( Address ))
StatusRec = IPsDictionary[Address];
else
StatusRec = MakeNewStatusRec();
ECTime RightNow = new ECTime();
RightNow.SetToNow();
StatusRec.TimeIndex = RightNow.GetIndex();
StatusRec.BadWebPageCount++;
StatusRec.SentText = Utility.CleanAsciiString( SentText, 2048 );
IPsDictionary[Address] = StatusRec;
}
catch( Exception Except )
{
MForm.ShowStatus( "Exception in AddToBadWebPageCountCount():" );
MForm.ShowStatus( Except.Message );
}
}
// http://en.wikipedia.org/wiki/Internet_media_type
internal void SendGenericWebResponse( byte[] Buffer, ulong ModifiedIndex, ulong UniqueEntity, string ContentType )
{
if( Client == null )
return;
try
{
// Set the initial UniqueEntity to the current date time index and then just
// keep incrementing it.
ECTime RightNow = new ECTime();
RightNow.SetToNow();
ECTime ExpireTime = new ECTime();
ExpireTime.SetToNow();
ExpireTime.AddSeconds( 120 );
ECTime ModifiedTime = new ECTime( ModifiedIndex );
// ETag is an Entity Tag.
// "An entity tag MUST be unique across all versions of all entities
// associated with a particular resource."
string Header = "HTTP/1.1 200 OK\r\n" +
"Date: " + RightNow.GetHTTPHeaderDateTime() + "\r\n" +
"Server: Eric Example\r\n" +
"Last-Modified: " + ModifiedTime.GetHTTPHeaderDateTime() + "\r\n" +
"ETag: " + UniqueEntity.ToString() + "\r\n" +
"Accept-Ranges: bytes\r\n" +
"Content-Length: " + Buffer.Length.ToString() + "\r\n" +
// "Cache-Control: max-age=5184000
"Expires: " + ExpireTime.GetHTTPHeaderDateTime() + "\r\n" +
"Keep-Alive: timeout=5, max=100\r\n" +
"Connection: Keep-Alive\r\n" +
"Content-Type: " + ContentType + "\r\n" +
"\r\n"; // Empty line and then the actual bytes.
byte[] HeaderBytes = UTF8Strings.StringToBytes( Header );
if( HeaderBytes == null )
return;
byte[] AllSendBytes;
if( GetIsHeadOnly() )
AllSendBytes = new byte[HeaderBytes.Length];
else
AllSendBytes = new byte[HeaderBytes.Length + Buffer.Length];
int Where = 0;
for( int Count = 0; Count < HeaderBytes.Length; Count++ )
{
AllSendBytes[Where] = HeaderBytes[Count];
Where++;
}
if( !GetIsHeadOnly() )
{
for( int Count = 0; Count < Buffer.Length; Count++ )
{
AllSendBytes[Where] = Buffer[Count];
Where++;
}
}
// This returns immediately.
WriteBytesAsync( AllSendBytes );
}
catch( Exception Except )
{
MForm.ShowStatus( "Exception in SendHTMLOrText():" );
MForm.ShowStatus( Except.Message );
}
}
internal bool SaveToFile()
{
string FileName = MForm.GetDataDirectory() + "NetStats.txt";
ECTime RecTime = new ECTime();
// OldTime.SetToYear1999();
// ulong OldIndex = OldTime.GetIndex();
try
{
using( StreamWriter SWriter = new StreamWriter( FileName ))
{
foreach( KeyValuePair<string, IPStatusRec> Kvp in IPsDictionary )
{
RecTime.SetFromIndex( Kvp.Value.TimeIndex );
string Line = Kvp.Key + "\t" +
RecTime.ToLocalTimeString() + "\t" +
RecTime.ToLocalDateString() + "\t" +
Kvp.Value.TimeIndex.ToString() + "\t" +
Kvp.Value.HackerCount.ToString() + "\t" +
Kvp.Value.TimedOutCount.ToString() + "\t" +
Kvp.Value.GoodWebRequestCount.ToString() + "\t" +
Kvp.Value.TotalGoodWebRequestCount.ToString() + "\t" +
Kvp.Value.Port80Count.ToString() + "\t" +
Kvp.Value.Port443Count.ToString() + "\t" +
Kvp.Value.Referer + "\t" +
Kvp.Value.UserAgent + "\t" +
Kvp.Value.HostName + "\t" +
Kvp.Value.LastHostNameUpdate.ToString() + "\t" +
Kvp.Value.BadWebPageCount.ToString(); // + "\t" +
// Kvp.Value.SentText;
SWriter.WriteLine( Line );
}
SWriter.WriteLine( " " );
}
return true;
}
catch( Exception ) // Except )
{
// "Error: Could not write
return false;
}
}
internal void CloseTimedOut()
{
ECTime OldTime = new ECTime();
OldTime.SetToNow();
////////////////////////
OldTime.AddSeconds( -4 );
ECTime OldWebTime = new ECTime();
OldWebTime.SetToNow();
// Browsers that are cooperative don't open too many connections at once.
// Denial of service people will.
// This delay makes browsers that are cooperative hold off on sending more
// requests until they've closed some sockets.
// Apparently this is the operating system that is being cooperative.
// And if this server is too busy it's not going to be calling this
// function to close it until it can get around to it.
// So cooperative web clients will wait.
OldWebTime.AddSeconds( -0.1 );
// OldWebTime.AddSeconds( 10 ); // If I put it 10 seconds in the _future_ it works.
// OldWebTime.AddSeconds( -10 );
// The socket is setting LastTransactTime when AsyncResult.IsCompleted.
// So it's setting it when the socket thinks it's done sending it.
ulong OldIndex = OldTime.GetIndex();
ulong OldWebIndex = OldWebTime.GetIndex();
for( int Count = 0; Count < ClientsLast; Count++ )
{
if( Clients[Count] == null ) // This should never happen but...
continue;
if( Clients[Count].IsShutDown())
continue;
/*
// Close a web request only after it has started processing the request.
if( Clients[Count].GetProcessingStarted())
{
if( Clients[Count].GetIsAWebRequest())
{
if( Clients[Count].GetLastTransactTimeIndex() < OldWebIndex )
{
if( Clients[Count].IsProcessingInBackground())
{
// ShowStatus( " " );
// ShowStatus( "Web request is still sending." );
// MForm.ServerLog.AddToLog( "Web Still Sending", "Nada", Clients[Count].GetRemoteAddress() );
}
Clients[Count].FreeEverything();
}
}
}
*/
// If it's more recent than the old index then it's OK.
if( Clients[Count].GetLastTransactTimeIndex() > OldIndex )
continue;
/*
// If this message has not already been processed.
if( !Clients[Count].GetProcessingStarted())
{
string InputS = Utility.GetCleanUnicodeString( Clients[Count].GetAllInputS(), 2000 );
InputS = InputS.Trim();
if( InputS.Length > 0 )
{
// ShowStatus( "Timed out with: " + InputS );
}
MForm.NetStats.AddToTimedOutCount( Clients[Count].GetRemoteAddress(), InputS );
}
*/
if( Clients[Count].IsProcessingInBackground())
{
ShowStatus( " " );
ShowStatus( "**************************************" );
ShowStatus( "Still sending after time out period." );
ShowStatus( "**************************************" );
ShowStatus( " " );
}
// They normally time out.
ShowStatus( "Closing timed out: " + Clients[Count].GetRemoteAddress());
Clients[Count].FreeEverything();
}
}
private void ProcessOuterMessages()
{
if( MForm.GetIsClosing())
return;
ECTime RightNow = new ECTime();
RightNow.SetToNow();
for( int Count = 0; Count < ClientsLast; Count++ )
{
if( Clients[Count] == null ) // This should never happen but...
continue;
// IsShutDown is a little slower than the above checks.
if( Clients[Count].IsShutDown())
continue;
Clients[Count].ProcessOuterMessages();
}
}
internal void ShowUserAgents()
{
ECTime RecTime = new ECTime();
MForm.ShowStatus( " " );
MForm.ShowStatus( "User Agents:" );
foreach( KeyValuePair<string, int> Kvp in UserAgentDictionary )
{
string ShowS = Kvp.Key + "\t" +
Kvp.Value.ToString();
MForm.ShowStatus( ShowS );
}
MForm.ShowStatus( " " );
}
internal bool DecryptWithQInverse( Integer EncryptedNumber,
Integer DecryptedNumber,
Integer TestDecryptedNumber,
Integer PubKeyN,
Integer PrivKInverseExponentDP,
Integer PrivKInverseExponentDQ,
Integer PrimeP,
Integer PrimeQ,
BackgroundWorker Worker )
{
Worker.ReportProgress( 0, " " );
Worker.ReportProgress( 0, "Top of DecryptWithQInverse()." );
// QInv and the dP and dQ numbers are normally already set up before
// you start your listening socket.
ECTime DecryptTime = new ECTime();
DecryptTime.SetToNow();
// See section 5.1.2 of RFC 2437 for these steps:
// http://tools.ietf.org/html/rfc2437
// 2.2 Let m_1 = c^dP mod p.
// 2.3 Let m_2 = c^dQ mod q.
// 2.4 Let h = qInv ( m_1 - m_2 ) mod p.
// 2.5 Let m = m_2 + hq.
Worker.ReportProgress( 0, "EncryptedNumber: " + IntMath.ToString10( EncryptedNumber ));
// 2.2 Let m_1 = c^dP mod p.
TestForDecrypt.Copy( EncryptedNumber );
IntMathNewForP.ModularPower( TestForDecrypt, PrivKInverseExponentDP, PrimeP, true );
if( Worker.CancellationPending )
return false;
M1ForInverse.Copy( TestForDecrypt );
// 2.3 Let m_2 = c^dQ mod q.
TestForDecrypt.Copy( EncryptedNumber );
IntMathNewForQ.ModularPower( TestForDecrypt, PrivKInverseExponentDQ, PrimeQ, true );
if( Worker.CancellationPending )
return false;
M2ForInverse.Copy( TestForDecrypt );
// 2.4 Let h = qInv ( m_1 - m_2 ) mod p.
// How many is optimal to avoid the division?
int HowManyIsOptimal = (PrimeP.GetIndex() * 3);
for( int Count = 0; Count < HowManyIsOptimal; Count++ )
{
if( M1ForInverse.ParamIsGreater( M2ForInverse ))
M1ForInverse.Add( PrimeP );
else
break;
}
if( M1ForInverse.ParamIsGreater( M2ForInverse ))
{
M1M2SizeDiff.Copy( M2ForInverse );
IntMath.Subtract( M1M2SizeDiff, M1ForInverse );
// Unfortunately this long Divide() has to be done.
IntMath.Divide( M1M2SizeDiff, PrimeP, Quotient, Remainder );
Quotient.AddULong( 1 );
Worker.ReportProgress( 0, "The Quotient for M1M2SizeDiff is: " + IntMath.ToString10( Quotient ));
IntMath.Multiply( Quotient, PrimeP );
M1ForInverse.Add( Quotient );
}
M1MinusM2.Copy( M1ForInverse );
IntMath.Subtract( M1MinusM2, M2ForInverse );
if( M1MinusM2.IsNegative )
throw( new Exception( "This is a bug. M1MinusM2.IsNegative is true." ));
if( QInv.IsNegative )
throw( new Exception( "This is a bug. QInv.IsNegative is true." ));
HForQInv.Copy( M1MinusM2 );
IntMath.Multiply( HForQInv, QInv );
if( HForQInv.IsNegative )
throw( new Exception( "This is a bug. HForQInv.IsNegative is true." ));
if( PrimeP.ParamIsGreater( HForQInv ))
{
IntMath.Divide( HForQInv, PrimeP, Quotient, Remainder );
HForQInv.Copy( Remainder );
}
// 2.5 Let m = m_2 + hq.
DecryptedNumber.Copy( HForQInv );
IntMath.Multiply( DecryptedNumber, PrimeQ );
DecryptedNumber.Add( M2ForInverse );
if( !TestDecryptedNumber.IsEqual( DecryptedNumber ))
throw( new Exception( "!TestDecryptedNumber.IsEqual( DecryptedNumber )." ));
Worker.ReportProgress( 0, " " );
Worker.ReportProgress( 0, "DecryptedNumber: " + IntMath.ToString10( DecryptedNumber ));
Worker.ReportProgress( 0, " " );
Worker.ReportProgress( 0, "TestDecryptedNumber: " + IntMath.ToString10( TestDecryptedNumber ));
Worker.ReportProgress( 0, " " );
Worker.ReportProgress( 0, "Decrypt with QInv time seconds: " + DecryptTime.GetSecondsToNow().ToString( "N2" ));
Worker.ReportProgress( 0, " " );
return true;
}
private void DoGeneralConstructorThings()
{
ModifyTime = new ECTime();
MostRecentIntegerValue = new Integer();
BitStreamRecArray = new BitStreamRec[8];
}
internal void Copy( ECTime ToCopy )
{
// This won't be quite exact since it's to the nearest millisecond.
UTCTime = new DateTime( ToCopy.GetYear(),
ToCopy.GetMonth(),
ToCopy.GetDay(),
ToCopy.GetHour(),
ToCopy.GetMinute(),
ToCopy.GetSecond(),
ToCopy.GetMillisecond(),
DateTimeKind.Utc ); // DateTimeKind.Local
}
internal void UpdateHostNameCheckTime( string IP )
{
try
{
IPStatusRec StatusRec;
if( IPsDictionary.ContainsKey( IP ))
StatusRec = IPsDictionary[IP];
else
StatusRec = MakeNewStatusRec();
ECTime RightNow = new ECTime();
RightNow.SetToNow();
StatusRec.TimeIndex = RightNow.GetIndex();
StatusRec.LastHostNameUpdate = RightNow.GetIndex();
IPsDictionary[IP] = StatusRec;
}
catch( Exception Except )
{
MForm.ShowStatus( "Exception in NetStatus.UpdateHostNameCheckTime():" );
MForm.ShowStatus( Except.Message );
}
}
internal bool SendCrudeClientHello( RNGCryptoServiceProvider CryptoRand, CustomerTLSClient CustomerTLS )
{
try
{
int LengthOfOuterMessage = 52 - 5;
byte[] ToSendBuf = new byte[LengthOfOuterMessage + 5];
// The first five bytes are the outer TLS record.
ToSendBuf[0] = 22; // Content type is Handshake
ToSendBuf[1] = 3; // Version Major TLS version 1.2 is version 3.3 (of SSL).
ToSendBuf[2] = 3; // Version Minor
ToSendBuf[3] = (byte)(LengthOfOuterMessage >> 8);
ToSendBuf[4] = (byte)(LengthOfOuterMessage);
// Start of the inner ClientHello message.
ToSendBuf[5] = 1; // Message type 1 is a ClientHello message.
int LengthOfClientHelloMessage = LengthOfOuterMessage - 4;
ToSendBuf[6] = (byte)(LengthOfClientHelloMessage >> 16);
ToSendBuf[7] = (byte)(LengthOfClientHelloMessage >> 8);
ToSendBuf[8] = (byte)(LengthOfClientHelloMessage);
ToSendBuf[9] = 3; // Version Major
ToSendBuf[10] = 3; // Version Minor
// This part for Unix time is not in TLS 1.3 because there's no point in having it.
// But it is here in TLS 1.2.
ECTime RightNow = new ECTime();
RightNow.SetToNow();
ulong UnixTime = RightNow.ToUnixTime();
ToSendBuf[11] = (byte)(UnixTime >> 24);
ToSendBuf[12] = (byte)(UnixTime >> 16);
ToSendBuf[13] = (byte)(UnixTime >> 8);
ToSendBuf[14] = (byte)(UnixTime);
// These bytes have to be cryptographically random.
// These are used later in generating the master secret and keys, etc.
byte[] RandomBytes = new byte[28];
CryptoRand.GetBytes( RandomBytes );
int Index = 15;
for( int Count = 0; Count < 28; Count++ )
{
ToSendBuf[Index] = RandomBytes[Count];
Index++;
}
// Index is 15 + 28 = 43.
// StatusString += "Index at the end of Random bytes is: " + Index.ToString() + "\r\n";
// Index at the end of Random bytes is: 43
ToSendBuf[43] = 0; // Session ID Length is zero. It's not resuming a session here.
// A browser sends a lot more cipher suites than this so this is
// usually a lot longer. The algorithm you prefer to use should
// be listed first. So they are listed in order of preference.
ToSendBuf[44] = 0; // Cipher Suites Length high byte
ToSendBuf[45] = 4; // Cipher Suites Length
ToSendBuf[46] = 0;
ToSendBuf[47] = 0x35; // TLS_RSA_WITH_AES_256_CBC_SHA = { 0x00,0x35 };
ToSendBuf[48] = 0;
ToSendBuf[49] = 0x3D; // TLS_RSA_WITH_AES_256_CBC_SHA256 = { 0x00,0x3D };
ToSendBuf[50] = 1; // Compression Methods Length
ToSendBuf[51] = 0; // Compression Method is null.
// This message has no extensions, so that's all there is to send.
return CustomerTLS.SendBuffer( ToSendBuf );
}
catch( Exception Except )
{
StatusString += "Exception in SendCrudeClientHello()\r\n";
StatusString += Except.Message + "\r\n";
return false;
}
}
internal bool ClearMidnightValues()
{
try
{
// The IP stuff is also kept in the server log.
ECTime RecTime = new ECTime();
ECTime OldTime = new ECTime();
OldTime.SetToNow();
OldTime.AddMinutes( -(60 * 24 * 30)); // 30 days.
ulong OldIndex = OldTime.GetIndex();
SortedDictionary<string, IPStatusRec> TempIPsDictionary = new SortedDictionary<string, IPStatusRec>();
foreach( KeyValuePair<string, IPStatusRec> Kvp in IPsDictionary )
{
RecTime.SetFromIndex( Kvp.Value.TimeIndex );
if( RecTime.GetIndex() < OldIndex )
continue;
// Keep totals on things like bad reg key count.
IPStatusRec Rec = Kvp.Value;
Rec.TimedOutCount = 0;
Rec.GoodWebRequestCount = 0;
// TotalGoodWebRequestCount
// BadWebPageCount
Rec.GetPublicKeyCount = 0;
// Rec.TotalGetPublicKeyCount
Rec.ConfirmBillingCount = 0;
// Rec.TotalConfirmBillingCount
TempIPsDictionary[Kvp.Key] = Rec;
}
IPsDictionary = TempIPsDictionary;
return true;
}
catch( Exception Except )
{
MForm.ShowStatus( "Exception in ClearMidnightValues():" );
MForm.ShowStatus( Except.Message );
return false;
}
}
internal void ShowIPStatus()
{
ECTime RecTime = new ECTime();
MForm.ShowStatus( " " );
string ShowS = "IP Address\t" +
"Server Time\t" +
"Server Date\t" +
"Hacker Count\t" +
"Timed Out Count\t" +
"Bad Web Page Count\t" +
"Good Web Request Count\t" +
"Total Good Web Request Count\t" +
"Port 80 Count\t" +
"GetPublicKeyCount\t" +
"TotalGetPublicKeyCount\t" +
"ConfirmBillingCount\t" +
"TotalConfirmBillingCount\t" +
"Referrer\t" +
"User Agent\t" +
"Host Name\t" +
"Sent Text";
MForm.ShowStatus( ShowS );
int HowMany = 0;
foreach( KeyValuePair<string, IPStatusRec> Kvp in IPsDictionary )
{
// Don't show too many. This is only meant as a quick way to show
// some records.
HowMany++;
if( HowMany > 1000 )
{
MForm.ShowStatus( " " );
MForm.ShowStatus( "Can't show more than 1000 IPs." );
MForm.ShowStatus( " " );
return;
}
RecTime.SetFromIndex( Kvp.Value.TimeIndex );
ShowS = Kvp.Key + "\t" +
RecTime.ToLocalTimeString() + "\t" +
RecTime.ToLocalDateString() + "\t" +
Kvp.Value.HackerCount.ToString( "N0" ) + "\t" +
Kvp.Value.TimedOutCount.ToString( "N0" ) + "\t" +
Kvp.Value.BadWebPageCount.ToString( "N0" ) + "\t" +
Kvp.Value.GoodWebRequestCount.ToString( "N0" ) + "\t" +
Kvp.Value.TotalGoodWebRequestCount.ToString( "N0" ) + "\t" +
Kvp.Value.Port80Count.ToString( "N0" ) + "\t" +
Kvp.Value.Port443Count.ToString( "N0" ) + "\t" +
Kvp.Value.GetPublicKeyCount.ToString( "N0" ) + "\t" +
Kvp.Value.TotalGetPublicKeyCount.ToString( "N0" ) + "\t" +
Kvp.Value.ConfirmBillingCount.ToString( "N0" ) + "\t" +
Kvp.Value.TotalConfirmBillingCount.ToString( "N0" ) + "\t" +
Utility.CleanAsciiString( Kvp.Value.Referer, 300 ) + "\t" +
Utility.CleanAsciiString( Kvp.Value.UserAgent, 300 ) + "\t" +
Utility.CleanAsciiString( Kvp.Value.HostName, 300 ) + "\t" +
Utility.CleanAsciiString( Kvp.Value.SentText, 300 );
MForm.ShowStatus( ShowS );
}
MForm.ShowStatus( " " );
}
private void DoCRTTest( Integer StartingNumber )
{
CRTMath CRTMath1 = new CRTMath( Worker );
ECTime CRTTestTime = new ECTime();
ChineseRemainder CRTTest = new ChineseRemainder( IntMath );
ChineseRemainder CRTTest2 = new ChineseRemainder( IntMath );
ChineseRemainder CRTAccumulate = new ChineseRemainder( IntMath );
ChineseRemainder CRTToTest = new ChineseRemainder( IntMath );
ChineseRemainder CRTTempEqual = new ChineseRemainder( IntMath );
ChineseRemainder CRTTestEqual = new ChineseRemainder( IntMath );
Integer BigBase = new Integer();
Integer ToTest = new Integer();
Integer Accumulate = new Integer();
Integer Test1 = new Integer();
Integer Test2 = new Integer();
CRTTest.SetFromTraditionalInteger( StartingNumber );
// If the digit array size isn't set right in relation to
// Integer.DigitArraySize then it can cause an error here.
CRTMath1.GetTraditionalInteger( Accumulate, CRTTest );
if( !Accumulate.IsEqual( StartingNumber ))
throw( new Exception( " !Accumulate.IsEqual( Result )." ));
CRTTestEqual.SetFromTraditionalInteger( Accumulate );
if( !CRTMath1.IsEqualToInteger( CRTTestEqual, Accumulate ))
throw( new Exception( "IsEqualToInteger() didn't work." ));
// Make sure it works with even numbers too.
Test1.Copy( StartingNumber );
Test1.SetD( 0, Test1.GetD( 0 ) & 0xFE );
CRTTest.SetFromTraditionalInteger( Test1 );
CRTMath1.GetTraditionalInteger( Accumulate, CRTTest );
if( !Accumulate.IsEqual( Test1 ))
throw( new Exception( "For even numbers. !Accumulate.IsEqual( Test )." ));
////////////
// Make sure the size of this works with the Integer size because
// an overflow is hard to find.
CRTTestTime.SetToNow();
Test1.SetToMaxValueForCRT();
CRTTest.SetFromTraditionalInteger( Test1 );
CRTMath1.GetTraditionalInteger( Accumulate, CRTTest );
if( !Accumulate.IsEqual( Test1 ))
throw( new Exception( "For the max value. !Accumulate.IsEqual( Test1 )." ));
// Worker.ReportProgress( 0, "CRT Max test seconds: " + CRTTestTime.GetSecondsToNow().ToString( "N1" ));
// Worker.ReportProgress( 0, "MaxValue: " + IntMath.ToString10( Accumulate ));
// Worker.ReportProgress( 0, "MaxValue.Index: " + Accumulate.GetIndex().ToString());
// Multiplicative Inverse test:
Integer TestDivideBy = new Integer();
Integer TestProduct = new Integer();
ChineseRemainder CRTTestDivideBy = new ChineseRemainder( IntMath );
ChineseRemainder CRTTestProduct = new ChineseRemainder( IntMath );
TestDivideBy.Copy( StartingNumber );
TestProduct.Copy( StartingNumber );
IntMath.Multiply( TestProduct, TestDivideBy );
CRTTestDivideBy.SetFromTraditionalInteger( TestDivideBy );
CRTTestProduct.SetFromTraditionalInteger( TestDivideBy );
CRTTestProduct.Multiply( CRTTestDivideBy );
CRTMath1.GetTraditionalInteger( Accumulate, CRTTestProduct );
if( !Accumulate.IsEqual( TestProduct ))
throw( new Exception( "Multiply test was bad." ));
IntMath.Divide( TestProduct, TestDivideBy, Quotient, Remainder );
if( !Remainder.IsZero())
throw( new Exception( "This test won't work unless it divides it exactly." ));
ChineseRemainder CRTTestQuotient = new ChineseRemainder( IntMath );
CRTMath1.MultiplicativeInverse( CRTTestProduct, CRTTestDivideBy, CRTTestQuotient );
// Yes, multiplicative inverse is the same number
// as with regular division.
Integer TestQuotient = new Integer();
CRTMath1.GetTraditionalInteger( TestQuotient, CRTTestQuotient );
if( !TestQuotient.IsEqual( Quotient ))
throw( new Exception( "Modular Inverse in DoCRTTest didn't work." ));
// Subtract
Test1.Copy( StartingNumber );
IntMath.SetFromString( Test2, "12345678901234567890123456789012345" );
CRTTest.SetFromTraditionalInteger( Test1 );
CRTTest2.SetFromTraditionalInteger( Test2 );
CRTTest.Subtract( CRTTest2 );
IntMath.Subtract( Test1, Test2 );
CRTMath1.GetTraditionalInteger( Accumulate, CRTTest );
if( !Accumulate.IsEqual( Test1 ))
throw( new Exception( "Subtract test was bad." ));
// Add
Test1.Copy( StartingNumber );
IntMath.SetFromString( Test2, "12345678901234567890123456789012345" );
CRTTest.SetFromTraditionalInteger( Test1 );
CRTTest2.SetFromTraditionalInteger( Test2 );
CRTTest.Add( CRTTest2 );
IntMath.Add( Test1, Test2 );
CRTMath1.GetTraditionalInteger( Accumulate, CRTTest );
if( !Accumulate.IsEqual( Test1 ))
throw( new Exception( "Add test was bad." ));
/////////
CRTBaseMath CBaseMath = new CRTBaseMath( Worker, CRTMath1 );
ChineseRemainder CRTInput = new ChineseRemainder( IntMath );
CRTInput.SetFromTraditionalInteger( StartingNumber );
Test1.Copy( StartingNumber );
IntMath.SetFromString( Test2, "12345678901234567890123456789012345" );
IntMath.Add( Test1, Test2 );
Integer TestModulus = new Integer();
TestModulus.Copy( Test1 );
ChineseRemainder CRTTestModulus = new ChineseRemainder( IntMath );
CRTTestModulus.SetFromTraditionalInteger( TestModulus );
Integer Exponent = new Integer();
Exponent.SetFromULong( PubKeyExponentUint );
CBaseMath.ModularPower( CRTInput, Exponent, CRTTestModulus, false );
IntMath.IntMathNew.ModularPower( StartingNumber, Exponent, TestModulus, false );
if( !CRTMath1.IsEqualToInteger( CRTInput, StartingNumber ))
throw( new Exception( "CRTBase ModularPower() didn't work." ));
CRTBase ExpTest = new CRTBase( IntMath );
CBaseMath.SetFromCRTNumber( ExpTest, CRTInput );
CBaseMath.GetExponentForm( ExpTest, 37 );
// Worker.ReportProgress( 0, "CRT was good." );
}
internal void MakeRSAKeys()
{
int ShowBits = (PrimeIndex + 1) * 32;
// int TestLoops = 0;
Worker.ReportProgress( 0, "Making RSA keys." );
Worker.ReportProgress( 0, "Bits size is: " + ShowBits.ToString());
// ulong Loops = 0;
while( true )
{
if( Worker.CancellationPending )
return;
Thread.Sleep( 1 ); // Give up the time slice. Let other things on the server run.
// Make two prime factors.
// Normally you'd only make new primes when you pay the Certificate
// Authority for a new certificate.
if( !MakeAPrime( PrimeP, PrimeIndex, 20 ))
return;
IntegerBase TestP = new IntegerBase();
IntegerBaseMath IntBaseMath = new IntegerBaseMath( IntMath );
string TestS = IntMath.ToString10( PrimeP );
IntBaseMath.SetFromString( TestP, TestS );
string TestS2 = IntBaseMath.ToString10( TestP );
if( TestS != TestS2 )
throw( new Exception( "TestS != TestS2 for IntegerBase." ));
if( Worker.CancellationPending )
return;
if( !MakeAPrime( PrimeQ, PrimeIndex, 20 ))
return;
if( Worker.CancellationPending )
return;
// This is extremely unlikely.
Integer Gcd = new Integer();
IntMath.GreatestCommonDivisor( PrimeP, PrimeQ, Gcd );
if( !Gcd.IsOne())
{
Worker.ReportProgress( 0, "They had a GCD: " + IntMath.ToString10( Gcd ));
continue;
}
if( Worker.CancellationPending )
return;
// This would never happen since the public key exponent used here
// is one of the small primes in the array in IntegerMath that it
// was checked against. But it does show here in the code that
// they have to be co-prime to each other. And in the future it
// might be found that the public key exponent has to be much larger
// than the one used here.
IntMath.GreatestCommonDivisor( PrimeP, PubKeyExponent, Gcd );
if( !Gcd.IsOne())
{
Worker.ReportProgress( 0, "They had a GCD with PubKeyExponent: " + IntMath.ToString10( Gcd ));
continue;
}
if( Worker.CancellationPending )
return;
IntMath.GreatestCommonDivisor( PrimeQ, PubKeyExponent, Gcd );
if( !Gcd.IsOne())
{
Worker.ReportProgress( 0, "2) They had a GCD with PubKeyExponent: " + IntMath.ToString10( Gcd ));
continue;
}
// For Modular Reduction. This only has to be done
// once, when P and Q are made.
IntMathNewForP.SetupGeneralBaseArray( PrimeP );
IntMathNewForQ.SetupGeneralBaseArray( PrimeQ );
PrimePMinus1.Copy( PrimeP );
IntMath.SubtractULong( PrimePMinus1, 1 );
PrimeQMinus1.Copy( PrimeQ );
IntMath.SubtractULong( PrimeQMinus1, 1 );
// These checks should be more thorough.
if( Worker.CancellationPending )
return;
Worker.ReportProgress( 0, "The Index of Prime P is: " + PrimeP.GetIndex().ToString() );
Worker.ReportProgress( 0, "Prime P:" );
Worker.ReportProgress( 0, IntMath.ToString10( PrimeP ));
Worker.ReportProgress( 0, " " );
Worker.ReportProgress( 0, "Prime Q:" );
Worker.ReportProgress( 0, IntMath.ToString10( PrimeQ ));
Worker.ReportProgress( 0, " " );
PubKeyN.Copy( PrimeP );
IntMath.Multiply( PubKeyN, PrimeQ );
Worker.ReportProgress( 0, " " );
Worker.ReportProgress( 0, "PubKeyN:" );
Worker.ReportProgress( 0, IntMath.ToString10( PubKeyN ));
Worker.ReportProgress( 0, " " );
// Euler's Theorem:
// https://en.wikipedia.org/wiki/Euler's_theorem
// if x ≡ y (mod φ(n)),
// then a^x ≡ a^y (mod n).
// Euler's Phi function (aka Euler's Totient function) is calculated
// next.
// PhiN is made from the two factors: (P - 1)(Q - 1)
// PhiN is: (P - 1)(Q - 1) = PQ - P - Q + 1
// If I add (P - 1) to PhiN I get:
// PQ - P - Q + 1 + (P - 1) = PQ - Q.
// If I add (Q - 1) to that I get:
// PQ - Q + (Q - 1) = PQ - 1.
// (P - 1)(Q - 1) + (P - 1) + (Q - 1) = PQ - 1
// If (P - 1) and (Q - 1) had a larger GCD then PQ - 1 would have
// that same factor too.
IntMath.GreatestCommonDivisor( PrimePMinus1, PrimeQMinus1, Gcd );
Worker.ReportProgress( 0, "GCD of PrimePMinus1, PrimeQMinus1 is: " + IntMath.ToString10( Gcd ));
if( !Gcd.IsULong())
{
Worker.ReportProgress( 0, "This GCD number is too big: " + IntMath.ToString10( Gcd ));
continue;
}
else
{
ulong TooBig = Gcd.GetAsULong();
// How big of a GCD is too big?
if( TooBig > 1234567 )
{
// (P - 1)(Q - 1) + (P - 1) + (Q - 1) = PQ - 1
Worker.ReportProgress( 0, "This GCD number is bigger than 1234567: " + IntMath.ToString10( Gcd ));
continue;
}
}
Integer Temp1 = new Integer();
PhiN.Copy( PrimePMinus1 );
Temp1.Copy( PrimeQMinus1 );
IntMath.Multiply( PhiN, Temp1 );
Worker.ReportProgress( 0, " " );
Worker.ReportProgress( 0, "PhiN:" );
Worker.ReportProgress( 0, IntMath.ToString10( PhiN ));
Worker.ReportProgress( 0, " " );
if( Worker.CancellationPending )
return;
// In RFC 2437 there are commonly used letters/symbols to represent
// the numbers used. So the number e is the public exponent.
// The number e that is used here is called PubKeyExponentUint = 65537.
// In the RFC the private key d is the multiplicative inverse of
// e mod PhiN. Which is mod (P - 1)(Q - 1). It's called
// PrivKInverseExponent here.
if( !IntMath.IntMathNew.FindMultiplicativeInverseSmall( PrivKInverseExponent, PubKeyExponent, PhiN, Worker ))
return;
if( PrivKInverseExponent.IsZero())
continue;
Worker.ReportProgress( 0, " " );
Worker.ReportProgress( 0, "PrivKInverseExponent: " + IntMath.ToString10( PrivKInverseExponent ));
if( Worker.CancellationPending )
return;
// In RFC 2437 it defines a number dP which is the multiplicative
// inverse, mod (P - 1) of e. That dP is named PrivKInverseExponentDP here.
Worker.ReportProgress( 0, " " );
if( !IntMath.IntMathNew.FindMultiplicativeInverseSmall( PrivKInverseExponentDP, PubKeyExponent, PrimePMinus1, Worker ))
return;
Worker.ReportProgress( 0, " " );
Worker.ReportProgress( 0, "PrivKInverseExponentDP: " + IntMath.ToString10( PrivKInverseExponentDP ));
if( PrivKInverseExponentDP.IsZero())
continue;
// PrivKInverseExponentDP is PrivKInverseExponent mod PrimePMinus1.
Integer Test1 = new Integer();
Test1.Copy( PrivKInverseExponent );
IntMath.Divide( Test1, PrimePMinus1, Quotient, Remainder );
Test1.Copy( Remainder );
if( !Test1.IsEqual( PrivKInverseExponentDP ))
throw( new Exception( "Bug. This does not match the definition of PrivKInverseExponentDP." ));
if( Worker.CancellationPending )
return;
// In RFC 2437 it defines a number dQ which is the multiplicative
// inverse, mod (Q - 1) of e. That dQ is named PrivKInverseExponentDQ here.
Worker.ReportProgress( 0, " " );
if( !IntMath.IntMathNew.FindMultiplicativeInverseSmall( PrivKInverseExponentDQ, PubKeyExponent, PrimeQMinus1, Worker ))
return;
if( PrivKInverseExponentDQ.IsZero())
continue;
Worker.ReportProgress( 0, " " );
Worker.ReportProgress( 0, "PrivKInverseExponentDQ: " + IntMath.ToString10( PrivKInverseExponentDQ ));
if( Worker.CancellationPending )
return;
Test1.Copy( PrivKInverseExponent );
IntMath.Divide( Test1, PrimeQMinus1, Quotient, Remainder );
Test1.Copy( Remainder );
if( !Test1.IsEqual( PrivKInverseExponentDQ ))
throw( new Exception( "Bug. This does not match the definition of PrivKInverseExponentDQ." ));
// Make a random number to test encryption/decryption.
Integer ToEncrypt = new Integer();
int HowManyBytes = PrimeIndex * 4;
byte[] RandBytes = MakeRandomBytes( HowManyBytes );
if( RandBytes == null )
{
Worker.ReportProgress( 0, "Error making random bytes in MakeRSAKeys()." );
return;
}
if( !ToEncrypt.MakeRandomOdd( PrimeIndex - 1, RandBytes ))
{
Worker.ReportProgress( 0, "Error making random number ToEncrypt." );
return;
}
Integer PlainTextNumber = new Integer();
PlainTextNumber.Copy( ToEncrypt );
Worker.ReportProgress( 0, " " );
Worker.ReportProgress( 0, "Before encrypting number: " + IntMath.ToString10( ToEncrypt ));
Worker.ReportProgress( 0, " " );
IntMath.IntMathNew.ModularPower( ToEncrypt, PubKeyExponent, PubKeyN, false );
if( Worker.CancellationPending )
return;
Worker.ReportProgress( 0, IntMath.GetStatusString() );
Integer CipherTextNumber = new Integer();
CipherTextNumber.Copy( ToEncrypt );
Worker.ReportProgress( 0, " " );
Worker.ReportProgress( 0, "Encrypted number: " + IntMath.ToString10( CipherTextNumber ));
Worker.ReportProgress( 0, " " );
ECTime DecryptTime = new ECTime();
DecryptTime.SetToNow();
IntMath.IntMathNew.ModularPower( ToEncrypt, PrivKInverseExponent, PubKeyN, false );
Worker.ReportProgress( 0, "Decrypted number: " + IntMath.ToString10( ToEncrypt ));
if( !PlainTextNumber.IsEqual( ToEncrypt ))
{
throw( new Exception( "PlainTextNumber not equal to unencrypted value." ));
// Because P or Q wasn't really a prime?
// Worker.ReportProgress( 0, "PlainTextNumber not equal to unencrypted value." );
// continue;
}
Worker.ReportProgress( 0, " " );
Worker.ReportProgress( 0, "Decrypt time seconds: " + DecryptTime.GetSecondsToNow().ToString( "N2" ));
Worker.ReportProgress( 0, " " );
if( Worker.CancellationPending )
return;
// Test the standard optimized way of decrypting:
if( !ToEncrypt.MakeRandomOdd( PrimeIndex - 1, RandBytes ))
{
Worker.ReportProgress( 0, "Error making random number in MakeRSAKeys()." );
return;
}
PlainTextNumber.Copy( ToEncrypt );
IntMath.IntMathNew.ModularPower( ToEncrypt, PubKeyExponent, PubKeyN, false );
if( Worker.CancellationPending )
return;
CipherTextNumber.Copy( ToEncrypt );
// QInv is the multiplicative inverse of PrimeQ mod PrimeP.
if( !IntMath.MultiplicativeInverse( PrimeQ, PrimeP, QInv, Worker ))
throw( new Exception( "MultiplicativeInverse() returned false." ));
if( QInv.IsNegative )
throw( new Exception( "This is a bug. QInv is negative." ));
Worker.ReportProgress( 0, "QInv is: " + IntMath.ToString10( QInv ));
DecryptWithQInverse( CipherTextNumber,
ToEncrypt, // Decrypt it to this.
PlainTextNumber, // Test it against this.
PubKeyN,
PrivKInverseExponentDP,
PrivKInverseExponentDQ,
PrimeP,
PrimeQ,
Worker );
Worker.ReportProgress( 0, " " );
Worker.ReportProgress( 0, "Found the values:" );
Worker.ReportProgress( 0, "Seconds: " + StartTime.GetSecondsToNow().ToString( "N0" ));
Worker.ReportProgress( 0, " " );
Worker.ReportProgress( 1, "Prime1: " + IntMath.ToString10( PrimeP ));
Worker.ReportProgress( 0, " " );
Worker.ReportProgress( 1, "Prime2: " + IntMath.ToString10( PrimeQ ));
Worker.ReportProgress( 0, " " );
Worker.ReportProgress( 1, "PubKeyN: " + IntMath.ToString10( PubKeyN ));
Worker.ReportProgress( 0, " " );
Worker.ReportProgress( 1, "PrivKInverseExponent: " + IntMath.ToString10( PrivKInverseExponent ));
/*
Worker.ReportProgress( 0, " " );
Worker.ReportProgress( 0, " " );
Worker.ReportProgress( 0, " " );
DoCRTTest( PrivKInverseExponent );
Worker.ReportProgress( 0, "Finished CRT test." );
Worker.ReportProgress( 0, " " );
*/
return; // Comment this out to just leave it while( true ) for testing.
}
}
internal void AddToConfirmBillingCount( string Address )
{
try
{
IPStatusRec StatusRec;
if( IPsDictionary.ContainsKey( Address ))
StatusRec = IPsDictionary[Address];
else
StatusRec = MakeNewStatusRec();
ECTime RightNow = new ECTime();
RightNow.SetToNow();
StatusRec.TimeIndex = RightNow.GetIndex();
StatusRec.ConfirmBillingCount++;
StatusRec.TotalConfirmBillingCount++;
IPsDictionary[Address] = StatusRec;
}
catch( Exception Except )
{
MForm.ShowStatus( "Exception in AddToConfirmBillingCount():" );
MForm.ShowStatus( Except.Message );
}
}
internal bool FindTwoFactorsWithFermat( Integer Product, Integer P, Integer Q, ulong MinimumX )
{
ECTime StartTime = new ECTime();
StartTime.SetToNow();
Integer TestSqrt = new Integer();
Integer TestSquared = new Integer();
Integer SqrRoot = new Integer();
TestSquared.Copy( Product );
IntMath.Multiply( TestSquared, Product );
IntMath.SquareRoot( TestSquared, SqrRoot );
TestSqrt.Copy( SqrRoot );
IntMath.DoSquare( TestSqrt );
// IntMath.Multiply( TestSqrt, SqrRoot );
if( !TestSqrt.IsEqual( TestSquared ))
throw( new Exception( "The square test was bad." ));
// Some primes:
// 29, 31, 37, 41, 43, 47, 53, 59, 61, 67, 71, 73, 79, 83, 89, 97,
// 101, 103, 107
P.SetToZero();
Q.SetToZero();
Integer TestX = new Integer();
SetupQuadResArray( Product );
ulong BaseTo37 = QuadResBigBase * 29UL * 31UL * 37UL;
// ulong BaseTo31 = QuadResBigBase * 29UL * 31UL;
ulong ProdModTo37 = IntMath.GetMod64( Product, BaseTo37 );
// ulong ProdModTo31 = IntMath.GetMod64( Product, BaseTo31 );
for( ulong BaseCount = 0; BaseCount < (29 * 31 * 37); BaseCount++ )
{
if( (BaseCount & 0xF) == 0 )
Worker.ReportProgress( 0, "Find with Fermat BaseCount: " + BaseCount.ToString() );
if( Worker.CancellationPending )
return false;
ulong Base = (BaseCount + 1) * QuadResBigBase; // BaseCount times 223,092,870.
if( Base < MinimumX )
continue;
Base = BaseCount * QuadResBigBase; // BaseCount times 223,092,870.
for( uint Count = 0; Count < QuadResArrayLast; Count++ )
{
// The maximum CountPart can be is just under half the size of
// the Product. (Like if Y - X was equal to 1, and Y + X was
// equal to the Product.) If it got anywhere near that big it
// would be inefficient to try and find it this way.
ulong CountPart = Base + QuadResArray[Count];
ulong Test = ProdModTo37 + (CountPart * CountPart);
// ulong Test = ProdModTo31 + (CountPart * CountPart);
Test = Test % BaseTo37;
// Test = Test % BaseTo31;
if( !IntegerMath.IsQuadResidue29( Test ))
continue;
if( !IntegerMath.IsQuadResidue31( Test ))
continue;
if( !IntegerMath.IsQuadResidue37( Test ))
continue;
ulong TestBytes = (CountPart & 0xFFFFF);
TestBytes *= (CountPart & 0xFFFFF);
ulong ProdBytes = Product.GetD( 1 );
ProdBytes <<= 8;
ProdBytes |= Product.GetD( 0 );
uint FirstBytes = (uint)(TestBytes + ProdBytes);
if( !IntegerMath.FirstBytesAreQuadRes( FirstBytes ))
{
// Worker.ReportProgress( 0, "First bytes aren't quad res." );
continue;
}
TestX.SetFromULong( CountPart );
IntMath.MultiplyULong( TestX, CountPart );
TestX.Add( Product );
// uint Mod37 = (uint)IntMath.GetMod32( TestX, 37 );
// if( !IntegerMath.IsQuadResidue37( Mod37 ))
// continue;
// Do more of these tests with 41, 43, 47...
// if( !IntegerMath.IsQuadResidue41( Mod37 ))
// continue;
// Avoid doing this square root at all costs.
if( IntMath.SquareRoot( TestX, SqrRoot ))
{
Worker.ReportProgress( 0, " " );
if( (CountPart & 1) == 0 )
Worker.ReportProgress( 0, "CountPart was even." );
else
Worker.ReportProgress( 0, "CountPart was odd." );
// Found an exact square root.
// P + (CountPart * CountPart) = Y*Y
// P = (Y + CountPart)Y - CountPart)
P.Copy( SqrRoot );
Integer ForSub = new Integer();
ForSub.SetFromULong( CountPart );
IntMath.Subtract( P, ForSub );
// Make Q the bigger one and put them in order.
Q.Copy( SqrRoot );
Q.AddULong( CountPart );
if( P.IsOne() || Q.IsOne())
{
// This happens when testing with small primes.
Worker.ReportProgress( 0, " " );
Worker.ReportProgress( 0, " " );
Worker.ReportProgress( 0, "Went all the way to 1 in FindTwoFactorsWithFermat()." );
Worker.ReportProgress( 0, " " );
Worker.ReportProgress( 0, " " );
P.SetToZero(); // It has no factors.
Q.SetToZero();
return true; // Tested everything, so it's a prime.
}
Worker.ReportProgress( 0, "Found P: " + IntMath.ToString10( P ) );
Worker.ReportProgress( 0, "Found Q: " + IntMath.ToString10( Q ) );
Worker.ReportProgress( 0, "Seconds: " + StartTime.GetSecondsToNow().ToString( "N1" ));
Worker.ReportProgress( 0, " " );
throw( new Exception( "Testing this." ));
// return true; // With P and Q.
}
// else
// Worker.ReportProgress( 0, "It was not an exact square root." );
}
}
// P and Q would still be zero if it never found them.
return false;
}
internal void StartSendingForDns( string IP )
{
if( MForm.GetIsClosing())
return;
if( IsDisposed )
return;
ulong LastUpdate = MForm.NetStats.GetLastHostNameUpdate( IP );
if( LastUpdate != 0 )
{
ECTime LastUpdateTime = new ECTime( LastUpdate );
if( LastUpdateTime.GetDaysToNow() < 7 )
return;
}
// MForm.ServerLog.AddToLog( "Description Data", "Getting description data." );
ECTime RightNow = new ECTime();
RightNow.SetToNow();
MForm.NetStats.UpdateHostNameCheckTime( IP );
// ShowStatus( " " );
// ShowStatus( "Dns for: " + IP + " " + ForWhat + " " + RightNow.ToLocalTimeString() );
// ShowStatus( "Dns for: " + ForWhat + " " + RightNow.ToLocalTimeString() );
DnsWorkerInfo WInfo = new DnsWorkerInfo();
WInfo.IP = IP;
try
{
if( !DNSBackgroundWorker.IsBusy )
{
DNSBackgroundWorker.RunWorkerAsync( WInfo );
}
else
{
// ShowStatus( "Dns background process is busy." );
}
}
catch( Exception Except )
{
ShowStatus( "Error starting background process for Dns." );
ShowStatus( Except.Message );
return;
}
}
private void CheckTimer_Tick(object sender, EventArgs e)
{
// This timer event only gets called when the server isn't otherwise busy.
// Even though the timer interval is set to once every 50 milliseconds it
// doesn't mean it will get called that often.
// It has TestTime to check on how busy it is.
if( !IsEnabled )
return;
CheckTimer.Stop();
try // for finally
{
try // for catch
{
ECTime TestTime = new ECTime();
TestTime.SetToNow();
// 100 clients queued up per timer tick is 2,000 per second max,
// assuming the server isn't busy and the timer events get called that often.
// But if there were that many clients connecting you'd need more front end
// servers to handle the I/O. Or it's a denial of service attack, and you'd
// need to deal with that.
for( int Count = 0; Count < 100; Count++ )
{
if( !IsEnabled )
return;
if( Listener.Pending() )
QueueConnectedClient();
else
break;
}
CloseTimedOut();
if( !IsEnabled )
return;
FreeClosed();
if( !IsEnabled )
return;
ProcessOuterMessages();
if( !IsEnabled )
return;
double Seconds = TestTime.GetSecondsToNow();
if( Seconds > 1.0 )
{
ShowStatus( " " );
ShowStatus( "**************************************************" );
ShowStatus( "TLS Listener Test time seconds: " + Seconds.ToString( "N0" ));
ShowStatus( "Test time:: " + TestTime.ToLocalTimeString());
ShowStatus( "**************************************************" );
ShowStatus( " " );
}
}
catch( Exception Except )
{
ShowStatus( "Exception in CheckTimerTick: \r\n" + Except.Message );
return;
}
}
finally
{
CheckTimer.Start();
}
}
private void ProcessWebRequests()
{
if( MForm.GetIsClosing())
return;
ECTime RightNow = new ECTime();
RightNow.SetToNow();
for( int Count = 0; Count < ClientsLast; Count++ )
{
if( Clients[Count] == null ) // This should never happen but...
continue;
// If this is something that has already been processed.
if( Clients[Count].GetProcessingStarted())
continue;
// IsShutDown is a little slower than the above checks.
if( Clients[Count].IsShutDown())
continue;
if( !Clients[Count].IsBrowserRequest())
continue;
if( !Clients[Count].IsBrowserRequestReady())
continue;
// ShowStatus( "Got a browser request 2." );
Clients[Count].SetProcessingStarted( true );
string InputS = Utility.GetCleanUnicodeString( Clients[Count].GetAllInputS(), 2000 );
// This FileName is already cleaned ASCII.
string FileName = Clients[Count].GetHTTPFileRequested();
string OriginalFileName = FileName;
FileName = FileName.ToLower();
FileName = FileName.Replace( "/", "" );
// ShowStatus( "FileName is: " + FileName );
if( FileName.StartsWith( "bad http:" ))
{
MForm.NetStats.AddToHackerCount( Clients[Count].GetRemoteAddress(), InputS );
// MForm.ServerLog.AddToLog( "Bad HTTP", InputS, Clients[Count].GetRemoteAddress() );
Clients[Count].FreeEverything();
ShowStatus( FileName );
continue;
}
if( FileName.StartsWith( "hacking:" ))
{
DailyHackCount++;
MForm.NetStats.AddToHackerCount( Clients[Count].GetRemoteAddress(), InputS );
// MForm.ServerLog.AddToLog( "Hacking", InputS, Clients[Count].GetRemoteAddress() );
Clients[Count].FreeEverything();
RightNow.SetToNow();
ShowStatus( RightNow.ToLocalTimeString() + " on " + RightNow.ToLocalDateString() );
ShowStatus( FileName );
ShowStatus( " " );
continue;
}
RightNow.SetToNow();
string Referer = "None";
string UserAgent = "None";
if( FileName == "laplata.htm" )
{
if( MForm.GetIsClosing())
return;
// MForm.NetStats.AddTo...
byte[] ToSendBuf = MForm.LaPlataData1.GetHTML( "smith" );
if( ToSendBuf != null )
Clients[Count].SendGenericWebResponse( ToSendBuf, RightNow.GetIndex(), UniqueEntityTag, "text/html" );
Referer = Clients[Count].GetReferer();
UserAgent = Clients[Count].GetUserAgent();
// MForm.ServerLog.AddToLog() ...
continue;
}
if( !MForm.WebFData.ContainsFile( FileName ))
{
Clients[Count].FreeEverything();
// This is already clean ASCII.
string LogText = FileName + ": " + InputS;
// MForm.ServerLog.AddToLog( "No Web File", LogText, Clients[Count].GetRemoteAddress() );
MForm.NetStats.AddToBadWebPageCount( Clients[Count].GetRemoteAddress(), InputS );
ShowStatus( " " );
RightNow.SetToNow();
ShowStatus( RightNow.ToLocalTimeString() + " on " + RightNow.ToLocalDateString() );
ShowStatus( "No Web File" );
ShowStatus( "Original: " + OriginalFileName );
ShowStatus( "Fixed: " + FileName );
ShowStatus( "From IP: " + Clients[Count].GetRemoteAddress() );
continue;
}
if( FileName.EndsWith( ".exe" ) || FileName.EndsWith( ".apk" ))
{
ShowStatus( " " );
RightNow.SetToNow();
ShowStatus( RightNow.ToLocalTimeString() + " on " + RightNow.ToLocalDateString() );
ShowStatus( "Request for: " + FileName );
ShowStatus( "From IP: " + Clients[Count].GetRemoteAddress() );
ShowStatus( " " );
}
Referer = Clients[Count].GetReferer();
UserAgent = Clients[Count].GetUserAgent();
MForm.NetStats.AddToUserAgentAndReferer( Clients[Count].GetRemoteAddress(), Referer, UserAgent );
// Increment UniqueEntityTag when it sends something.
UniqueEntityTag++;
// FileName is already clean ASCII, it's lower case, and trimmed.
// This is a reference to the buffer, but the client copies from it.
byte[] Buffer = MForm.WebFData.GetBuffer( FileName );
if( Buffer == null )
{
ShowStatus( "The buffer was null for a good web request: " + FileName );
continue;
}
if( FileName.EndsWith( ".jpg" ))
{
Clients[Count].SendGenericWebResponse( Buffer, RightNow.GetIndex(), UniqueEntityTag, "image/jpeg" );
// MForm.ServerLog.AddToLog( "Finished Web Request", FileName, Clients[Count].GetRemoteAddress() );
continue;
}
if( FileName.EndsWith( ".gif" ))
{
Clients[Count].SendGenericWebResponse( Buffer, RightNow.GetIndex(), UniqueEntityTag, "image/gif" );
// MForm.ServerLog.AddToLog( "Finished Web Request", FileName, Clients[Count].GetRemoteAddress() );
continue;
}
if( FileName.EndsWith( ".htm" ))
{
Clients[Count].SendGenericWebResponse( Buffer, RightNow.GetIndex(), UniqueEntityTag, "text/html" );
// MForm.ServerLog.AddToLog( "Finished Web Request", FileName, Clients[Count].GetRemoteAddress() );
continue;
}
if( FileName.EndsWith( ".txt" ))
{
Clients[Count].SendGenericWebResponse( Buffer, RightNow.GetIndex(), UniqueEntityTag, "text/plain" );
// MForm.ServerLog.AddToLog( "Finished Web Request", FileName, Clients[Count].GetRemoteAddress() );
continue;
}
if( FileName.EndsWith( ".pdf" ))
{
Clients[Count].SendGenericWebResponse( Buffer, RightNow.GetIndex(), UniqueEntityTag, "application/pdf" );
// MForm.ServerLog.AddToLog( "Finished Web Request", FileName, Clients[Count].GetRemoteAddress() );
continue;
}
if( FileName == "favicon.ico" )
{
Clients[Count].SendGenericWebResponse( Buffer, RightNow.GetIndex(), UniqueEntityTag, "image/vnd.microsoft.icon" );
// MForm.ServerLog.AddToLog( "Finished Web Request", FileName, Clients[Count].GetRemoteAddress() );
continue;
}
// Default to sending text unless there's some other way to send it.
Clients[Count].SendGenericWebResponse( Buffer, RightNow.GetIndex(), UniqueEntityTag, "text/plain" );
// MForm.ServerLog.AddToLog( "Finished Web Request", FileName, Clients[Count].GetRemoteAddress() );
}
}