void InitModelingView(EdmDraw.EdmConfig edmConfig, ElecManage.Electrode elec, bool isAutoMode = true)
{
if (IsInitModelingView && !isAutoMode)
{
return;
}
SnapEx.Create.ApplicationSwitchRequest(SnapEx.ApplicationType.MODELING);
var wcsOrientation = Electrode.GetStandardOrientation(Snap.Globals.WcsOrientation);
var acsOrientation = Snap.Orientation.Identity;
var baseDirOrientation = Electrode.GetSidelongOrientation(new Snap.Orientation(-elec.BaseFace.GetFaceDirection()));
var transR = Snap.Geom.Transform.CreateRotation(acsOrientation, wcsOrientation);
var transR1 = Snap.Geom.Transform.CreateRotation(baseDirOrientation, wcsOrientation);
var draftViewLocations = edmConfig.DraftViewLocations ?? new List <EdmDraw.EdmConfig.DraftViewLocation>();
foreach (var item in draftViewLocations)
{
var viewType = EdmDraw.DrawBusiness.GetEumnViewType(item.ViewType);
var X = new Snap.Vector(item.Xx, item.Xy, item.Xz).Copy(transR);
var Y = new Snap.Vector(item.Yx, item.Yy, item.Yz).Copy(transR);
if (viewType == EdmDraw.ViewType.EACT_BOTTOM ||
viewType == EdmDraw.ViewType.EACT_BOTTOM_FRONT ||
viewType == EdmDraw.ViewType.EACT_BOTTOM_ISOMETRIC
)
{
X = X.Copy(transR1);
Y = Y.Copy(transR1);
}
EdmDraw.DrawBusiness.CreateCamera(viewType, new double[] { X.X, X.Y, X.Z, Y.X, Y.Y, Y.Z });
}
IsInitModelingView = true;
}
public static Electrode GetElectrode(Snap.NX.Body body)
{
Electrode result = null;
var elecName = body.Name;
var faces = body.Faces;
//顶面
var topFace = faces.FirstOrDefault(u => u.MatchAttrValue(UP_PART_MOLD_FACE_TYPE, BASE_BOT));
//基准面
var baseFace = faces.FirstOrDefault(u => u.MatchAttrValue(UP_PART_MOLD_FACE_TYPE, BASE_TOP));
//基准台侧面
var baseSideFaces = faces.Where(u =>
u.MatchAttrValue(UP_PART_MOLD_FACE_TYPE, BASE_SIDE2) ||
u.MatchAttrValue(UP_PART_MOLD_FACE_TYPE, BASE_SIDE3) ||
u.MatchAttrValue(UP_PART_MOLD_FACE_TYPE, BASE_SIDE5) ||
u.MatchAttrValue(UP_PART_MOLD_FACE_TYPE, BASE_SIDE6)
).ToList();
//象限面
var chamferFace = faces.FirstOrDefault(u => u.MatchAttrValue(UP_PART_MOLD_FACE_TYPE, BASE_CHAMFER));
if (!string.IsNullOrEmpty(elecName) && topFace != null && baseFace != null && baseSideFaces.Count >= 4)
{
var model = new UPElectrode();
model.BaseFace = baseFace;
model.TopFace = topFace;
model.BaseSideFaces = baseSideFaces.ToList();
model.ElecBody = body;
model.ChamferFace = chamferFace;
//model.ElecHeadFaces = Electrode.GetElecHeadFaces(faces.ToList(), baseFace, out baseSideFaces);
result = model;
model.AllObject.Add(body);
}
return(result);
}
public static Electrode GetElectrode(Snap.NX.Body body)
{
Electrode result = null;
var elecName = body.Name;
var faces = body.Faces;
//顶面
var topFace = faces.FirstOrDefault(u => u.MatchAttrValue(ATTR_NAME_MARK, BASE_BOT));
//基准面
var baseFace = faces.FirstOrDefault(u => u.MatchAttrValue(ATTR_NAME_MARK, BASE_TOP));
//基准台侧面
var baseSideFaces = faces.Where(u => u.MatchAttrValue(ATTR_NAME_MARK, BASE_SIDE)).ToList();
//基准点
var elecBasePoint = Snap.Globals.WorkPart.Points.Where(u => u.MatchAttrValue(ATTR_NAME_MARK, elecName) && u.MatchAttrValue(DIM_PT, DIM_PT))
.OrderBy(u => Snap.Compute.Distance(u.Position, body)).FirstOrDefault();
//象限面
var chamferFace = faces.FirstOrDefault(u => u.MatchAttrValue(ATTR_NAME_MARK, BASE_CHAMFER));
if (!string.IsNullOrEmpty(elecName) && topFace != null && baseFace != null && baseSideFaces.Count >= 4
//&& elecBasePoint != null
)
{
var model = new XKElectrode();
model.BaseFace = baseFace;
model.TopFace = topFace;
model.BaseSideFaces = baseSideFaces.ToList();
model.ElecBasePoint = elecBasePoint;
model.ElecBody = body;
model.ChamferFace = chamferFace;
//model.ElecHeadFaces = Electrode.GetElecHeadFaces(faces.ToList(), baseFace, out baseSideFaces);
result = model;
model.AllObject.Add(body);
model.AllObject.Add(elecBasePoint);
}
return(result);
}
public static Electrode GetElectrode(Snap.NX.Body body)
{
Electrode result = null;
var elecName = body.Name;
var faces = body.Faces;
//顶面
var topFace = faces.FirstOrDefault(u => u.MatchAttrValue(BASE_BOT, 1));
//基准面
var baseFaces = faces.Where(u => u.MatchAttrValue(BASE_TOP, 1)).ToList();
var baseFace = baseFaces.FirstOrDefault();
if (baseFaces.Count > 1)
{
baseFace = baseFaces.OrderByDescending(u => Snap.Compute.Perimeter(u)).FirstOrDefault();
}
var attrValue = body.GetAttrValue(EACT_ELECT_GROUP);
//基准点
var elecBasePoint = Snap.Globals.WorkPart.Points.FirstOrDefault(u => !string.IsNullOrEmpty(attrValue) && u.MatchAttrValue(EACT_ELECT_GROUP, attrValue));
if (!string.IsNullOrEmpty(elecName) && topFace != null && baseFace != null)
{
var model = new EactElectrode();
model.BaseFace = baseFace;
model.TopFace = topFace;
model.ElecBasePoint = elecBasePoint;
model.ElecBody = body;
result = model;
model.AllObject.Add(body);
if (elecBasePoint != null)
{
model.AllObject.Add(elecBasePoint);
}
}
return(result);
}
/// <summary>
/// 初始化所有的面
/// </summary>
public virtual void InitAllFace()
{
if (!isInitAllFace)
{
GetTopFace();
var allSideFaces = new List <Snap.NX.Face>();
var faces = ElecBody.Faces.ToList();
ElecHeadFaces = Electrode.GetElecHeadFaces(faces, BaseFace, out allSideFaces);
BaseSideFaces = Electrode.GetBaseSideFaces(BaseFace, allSideFaces);
isInitAllFace = true;
}
}
public override void Init()
{
toggle0.Value = false;
var snapSelectCuprum = Snap.UI.Block.SelectObject.GetBlock(theDialog, selectCuprum.Name);
snapSelectCuprum.SetFilter(Snap.NX.ObjectTypes.Type.Body);
snapSelectCuprum.AllowMultiple = false;
var snapSelectedPoint = Snap.UI.Block.SelectObject.GetBlock(theDialog, selectionPoint.Name);
snapSelectedPoint.AllowMultiple = false;
snapSelectedPoint.SetFilter(Snap.NX.ObjectTypes.Type.Face);
tree_control0.SetOnSelectHandler(new NXOpen.BlockStyler.Tree.OnSelectCallback(OnSelectcallback));
_electrode = null;
}
public static Electrode GetElectrode(Snap.NX.Body body)
{
Electrode result = null;
Snap.NX.Face baseFace = null;
var diagonalLine = GetDiagonalLine(body, out baseFace);
if (diagonalLine != null)
{
var faceDirection = baseFace.GetFaceDirection();
var model = new JYElectrode();
model.DiagonalLine = diagonalLine;
model.BaseFace = baseFace;
model.ElecBody = body;
result = model;
}
return(result);
}
/// <summary>
/// 获取摄像机视角
/// </summary>
public static Snap.Orientation GetCameraOrientation(Snap.Orientation ori, Electrode elec = null)
{
var wcsOrientation = Electrode.GetStandardOrientation(Snap.Globals.WcsOrientation);
var acsOrientation = Snap.Orientation.Identity;
var transR = Snap.Geom.Transform.CreateRotation(acsOrientation, wcsOrientation);
var X = new Snap.Vector(ori.AxisX.X, ori.AxisX.Y, ori.AxisX.Z).Copy(transR);
var Y = new Snap.Vector(ori.AxisY.X, ori.AxisY.Y, ori.AxisY.Z).Copy(transR);
if (elec != null)
{
var baseDirOrientation = Electrode.GetSidelongOrientation(new Snap.Orientation(-elec.BaseFace.GetFaceDirection()));
var transR1 = Snap.Geom.Transform.CreateRotation(baseDirOrientation, wcsOrientation);
X = X.Copy(transR1);
Y = Y.Copy(transR1);
}
return(new Snap.Orientation(X, Y));
}
public static Electrode GetElectrode(Snap.NX.Body body)
{
Electrode result = null;
result = XKElectrode.GetElectrode(body);
if (result == null)
{
result = UPElectrode.GetElectrode(body);
}
if (result == null)
{
result = JYElectrode.GetElectrode(body);
}
if (result == null)
{
result = EactElectrode.GetElectrode(body);
}
return(result);
}
void AutoSelectPoint()
{
DeleteNodes();
var body = selectCuprum.SelectedObjects.FirstOrDefault() as Snap.NX.Body;
var pointDatas = new List <PointData>();
var mark = Snap.Globals.SetUndoMark(Snap.Globals.MarkVisibility.Invisible, "ComponentHelperAutoSelectPoint");
try
{
pointDatas = CMMBusiness.AutoSelPoint(_electrode, _config, false);
}
catch (Exception ex)
{
pointDatas = new List <PointData>();
selectCuprum.SelectedObjects = new Snap.NX.NXObject[] { };
_electrode = null;
NXOpen.UF.UFSession.GetUFSession().Ui.DisplayMessage(ex.Message, 1);
}
Snap.Globals.UndoToMark(mark, "ComponentHelperAutoSelectPoint");
UFDisp(pointDatas);
}
public override void Update(UIBlock block)
{
if (bodySelect0.NXOpenBlock == block)
{
_electrode = null;
dic.Clear();
var body = bodySelect0.SelectedObjects.FirstOrDefault() as Snap.NX.Body;
if (body != null)
{
var faces = body.Faces.ToList();
faces.ForEach(u =>
{
dic.Add(u.NXOpenTag, u.GetDraftAngle(vector0.Direction));
});
_electrode = ElecManage.Electrode.GetElectrode(body);
if (_electrode != null)
{
_electrode.InitAllFace();
}
}
}
RefreshData();
}
void CreateEACT_BOTTOMView(NXOpen.Drawings.DrawingSheet ds, List <NXOpen.TaggedObject> selections, Snap.Position pos, Snap.Position size, ElecManage.Electrode electrode, EdmDraw.EdmConfig edmConfig)
{
var bottomView = EdmDraw.DrawBusiness.CreateBaseView(ds, GetModelingView(EdmDraw.ViewType.EACT_BOTTOM).Tag, selections, pos, size, edmConfig);
var bottomViewBorderPoints = EdmDraw.DrawBusiness.GetBorderPoint(bottomView, electrode.ElecBody);
var yPlusSideFace = EdmDraw.DrawBusiness.CreateNxObject(() => { return(Snap.Create.Point(bottomViewBorderPoints[1])); }, bottomView.Tag);
var yMinusSideFace = EdmDraw.DrawBusiness.CreateNxObject(() => { return(Snap.Create.Point(bottomViewBorderPoints[0])); }, bottomView.Tag);
var xPlusSideFace = EdmDraw.DrawBusiness.CreateNxObject(() => { return(Snap.Create.Line(bottomViewBorderPoints[0], bottomViewBorderPoints[1])); }, bottomView.Tag);
var xMinusSideFace = EdmDraw.DrawBusiness.CreateNxObject(() => { return(Snap.Create.Line(bottomViewBorderPoints[2], bottomViewBorderPoints[3])); }, bottomView.Tag);
//电极仰视图
EdmDraw.DrawBusiness.CreateVerticalDim(bottomView.Tag, yPlusSideFace.NXOpenTag, yMinusSideFace.NXOpenTag,
new Snap.Position(bottomView.GetDrawingReferencePoint().X + (EdmDraw.DrawBusiness.GetBorderSize(bottomView.Tag).X / 2), bottomView.GetDrawingReferencePoint().Y, 0));
EdmDraw.DrawBusiness.CreatePerpendicularDim(bottomView.Tag, xPlusSideFace.NXOpenTag, xMinusSideFace.NXOpenTag,
new Snap.Position(bottomView.GetDrawingReferencePoint().X, bottomView.GetDrawingReferencePoint().Y + (EdmDraw.DrawBusiness.GetBorderSize(bottomView.Tag).Y / 2), 0));
var bottomViewElecHeadBorderPoints = EdmDraw.DrawBusiness.GetBorderPoint(bottomView, electrode.ElecHeadFaces);
var yPlusElectrodeEdge = EdmDraw.DrawBusiness.CreateNxObject(() => { return(Snap.Create.Point(bottomViewElecHeadBorderPoints[1])); }, bottomView.Tag);
var yMinusElectrodeEdge = EdmDraw.DrawBusiness.CreateNxObject(() => { return(Snap.Create.Point(bottomViewElecHeadBorderPoints[0])); }, bottomView.Tag);
var xPlusElectrodeEdge = EdmDraw.DrawBusiness.CreateNxObject(() => { return(Snap.Create.Line(bottomViewElecHeadBorderPoints[0], bottomViewElecHeadBorderPoints[1])); }, bottomView.Tag);
var xMinusElectrodeEdge = EdmDraw.DrawBusiness.CreateNxObject(() => { return(Snap.Create.Line(bottomViewElecHeadBorderPoints[2], bottomViewElecHeadBorderPoints[3])); }, bottomView.Tag);
EdmDraw.DrawBusiness.CreateVerticalDim(bottomView.Tag, yPlusElectrodeEdge.NXOpenTag, yMinusElectrodeEdge.NXOpenTag,
new Snap.Position(bottomView.GetDrawingReferencePoint().X - (EdmDraw.DrawBusiness.GetBorderSize(bottomView.Tag).X / 2), bottomView.GetDrawingReferencePoint().Y, 0));
EdmDraw.DrawBusiness.CreatePerpendicularDim(bottomView.Tag, xPlusElectrodeEdge.NXOpenTag, xMinusElectrodeEdge.NXOpenTag,
new Snap.Position(bottomView.GetDrawingReferencePoint().X, bottomView.GetDrawingReferencePoint().Y - (EdmDraw.DrawBusiness.GetBorderSize(bottomView.Tag).Y / 2), 0));
}
void CreateEACT_BOTTOM_FRONTView(NXOpen.Drawings.DrawingSheet ds, List <NXOpen.TaggedObject> selections, Snap.Position pos, Snap.Position size, ElecManage.Electrode electrode, EdmDraw.EdmConfig edmConfig)
{
var bottomFrontView = EdmDraw.DrawBusiness.CreateBaseView(ds, GetModelingView(EdmDraw.ViewType.EACT_BOTTOM_FRONT).Tag, selections, pos, size, edmConfig);
var baseFace = electrode.BaseFace;
var bottomFrontViewBorderPoints = EdmDraw.DrawBusiness.GetBorderPoint(bottomFrontView, electrode.ElecBody);
var bottomFrontViewTopPoint = EdmDraw.DrawBusiness.CreateNxObject(() => { return(Snap.Create.Point(bottomFrontViewBorderPoints[3])); }, bottomFrontView.Tag);
var bottomFrontViewBottomPoint = EdmDraw.DrawBusiness.CreateNxObject(() => { return(Snap.Create.Point(bottomFrontViewBorderPoints[2])); }, bottomFrontView.Tag);
//电极前视图
EdmDraw.DrawBusiness.CreateVerticalDim(
bottomFrontView.Tag,
bottomFrontViewTopPoint.NXOpenTag,
bottomFrontViewBottomPoint.NXOpenTag,
new Snap.Position(bottomFrontView.GetDrawingReferencePoint().X + (EdmDraw.DrawBusiness.GetBorderSize(bottomFrontView.Tag).X / 2), bottomFrontView.GetDrawingReferencePoint().Y));
EdmDraw.DrawBusiness.CreateVerticalDim(bottomFrontView.Tag, baseFace.NXOpenTag, bottomFrontViewBottomPoint.NXOpenTag,
new Snap.Position(bottomFrontView.GetDrawingReferencePoint().X - (EdmDraw.DrawBusiness.GetBorderSize(bottomFrontView.Tag).X / 2), bottomFrontView.GetDrawingReferencePoint().Y));
}
BaseView CreateEACT_FRONTView(NXOpen.Drawings.DrawingSheet ds, List <NXOpen.TaggedObject> selections, Snap.Position pos, Snap.Position size, ElecManage.Electrode electrode, EdmDraw.EdmConfig edmConfig)
{
var frontView = EdmDraw.DrawBusiness.CreateBaseView(ds, GetModelingView(EdmDraw.ViewType.EACT_FRONT).Tag, selections, pos, size, edmConfig);
var frontViewRightMargin = EdmDraw.DrawBusiness.GetViewBorder(EdmDraw.ViewBorderType.Right, frontView);
var frontViewLeftMargin = EdmDraw.DrawBusiness.GetViewBorder(EdmDraw.ViewBorderType.Left, frontView);
var ufSession = NXOpen.UF.UFSession.GetUFSession();
var originPoint = EdmDraw.DrawBusiness.CreateNxObject(() => { return(Snap.Create.Point(Snap.Globals.Wcs.Origin)); }, frontView.Tag);
var elecBasePoint = EdmDraw.DrawBusiness.CreateNxObject(() => { return(Snap.Create.Point(electrode.GetElecBasePos())); }, frontView.Tag);
var drawBorderPoints = EdmDraw.DrawBusiness.GetDrawBorderPoint(frontView, Snap.NX.Body.Wrap(selections.First().Tag));
var listY = Enumerable.Select(drawBorderPoints, u => u.Y).ToList();
var listX = Enumerable.Select(drawBorderPoints, u => u.X).ToList();
listY.Add(EdmDraw.DrawBusiness.MapModelToDrawing(frontView.Tag, originPoint.Position).Y);
listY.Distinct().ToList().ForEach(u => {
var tempModel = new double[] { 0, 0, 0 };
ufSession.View.MapDrawingToModel(frontView.Tag, new double[] { listX.Min(), u }, tempModel);
var tempU = EdmDraw.DrawBusiness.CreateNxObject <Snap.NX.Point>(() => { return(Snap.Create.Point(tempModel)); }, frontView.Tag);
EdmDraw.DrawBusiness.CreatePerpendicularOrddimension(
frontView.Tag,
originPoint.NXOpenTag,
frontViewLeftMargin.NXOpenTag,
tempU.NXOpenTag
);
});
var frontViewOrddimension = EdmDraw.DrawBusiness.CreatePerpendicularOrddimension(
frontView.Tag,
originPoint.NXOpenTag,
frontViewRightMargin.NXOpenTag,
elecBasePoint.NXOpenTag
);
EdmDraw.DrawBusiness.SetToleranceType(frontViewOrddimension);
return(frontView);
}
/// <summary>
/// 创建注释
/// </summary>
void CreateNodeInfo(ElecManage.Electrode elec, EdmDraw.EdmConfig edmConfig)
{
var properties = edmConfig.PropertyInfos ?? new List <EdmDraw.EdmConfig.PropertyInfo>();
var propertiesDic = new Dictionary <string, List <EdmDraw.EdmConfig.PropertyInfo> >();
properties.ForEach(u => {
var displayName = u.DisplayName;
var dValue = string.Empty;
if (displayName.Contains("-"))
{
var splits = displayName.Split('-');
displayName = splits.FirstOrDefault();
dValue = splits.LastOrDefault();
}
if (!propertiesDic.ContainsKey(displayName))
{
propertiesDic.Add(displayName, new List <EdmDraw.EdmConfig.PropertyInfo> {
u
});
}
else
{
propertiesDic[displayName].Add(u);
}
});
var elecInfo = elec.GetElectrodeInfo();
var edmNodeInfo = new EdmDraw.EDMNodeInfo();
edmNodeInfo.电极材质 = elecInfo.MAT_NAME;
edmNodeInfo.电极类型 = elecInfo.UNIT;
edmNodeInfo.电极层 = elec.ElecBody.Layer.ToString();
edmNodeInfo.电极名称 = elecInfo.Elec_Name;
edmNodeInfo.模号 = elecInfo.EACT_MODELNO;
edmNodeInfo.工件名称 = elecInfo.EACT_PARTNO;
edmNodeInfo.精公数量 = elecInfo.FINISH_NUMBER.ToString();
edmNodeInfo.中公数量 = elecInfo.MIDDLE_NUMBER.ToString();
edmNodeInfo.粗公数量 = elecInfo.ROUGH_NUMBER.ToString();
edmNodeInfo.精公火花位 = elecInfo.FINISH_SPACE.ToString();
edmNodeInfo.中公火花位 = elecInfo.MIDDLE_SPACE.ToString();
edmNodeInfo.粗公火花位 = elecInfo.ROUGH_SPACE.ToString();
edmNodeInfo.摇摆方式 = elecInfo.EDMROCK;
edmNodeInfo.制图 = "EACT";
edmNodeInfo.日期 = DateTime.Now.ToShortDateString();
foreach (var item in propertiesDic)
{
var displayName = item.Key;
var pValue = EdmDraw.Helper.GetPropertyValue(edmNodeInfo, displayName) ?? string.Empty;
var u = item.Value.FirstOrDefault(p => (p.DisplayName.Contains(displayName) && p.DisplayName.Contains(pValue.ToString())) || p.DisplayName.Contains(displayName));
if (u.Ex == "1")
{
EdmDraw.DrawBusiness.CreateTick(new Snap.Position(u.LocationX, u.LocationY));
}
else
{
EdmDraw.DrawBusiness.CreateNode(pValue.ToString(), new Snap.Position(u.LocationX, u.LocationY));
}
}
}
public void CreateDrawingSheet(List <PositioningInfo> positionings, Snap.NX.Body steel, bool isAutoMode)
{
var edmConfig = EdmDraw.UCEdmConfig.GetInstance();
var templateName = edmConfig.GetEdmTemplate();
if (string.IsNullOrEmpty(templateName))
{
return;
}
ElecManage.Electrode electrode = positionings.FirstOrDefault().Electrode;
var selectedObj = electrode.ElecBody;
electrode.InitAllFace();
InitModelingView(edmConfig, electrode, isAutoMode);
SetIsHidden(positionings, steel);
EdmDraw.DrawBusiness.InitPreferences(edmConfig);
var workPart = Snap.Globals.WorkPart;
var dsName = selectedObj.Name;
var list = new List <NXOpen.TaggedObject>();
list.Add(steel);
list.Add(selectedObj);
workPart.NXOpenPart.DrawingSheets.ToArray().Where(u => u.Name == dsName).ToList().ForEach(u =>
{
Snap.NX.NXObject.Delete(u);
});
//图纸显示
EdmDraw.DrawBusiness.SetShowLayers(new List <int> {
1
}, edmConfig.EdmDrfLayer);
//新建图纸页
var ds = SnapEx.Create.DrawingSheet(selectedObj.Name, templateName);
EdmDraw.DrawBusiness.SetDrawSheetLayer(ds, edmConfig.EdmDrfLayer);
var draftViewLocations = edmConfig.DraftViewLocations ?? new List <EdmDraw.EdmConfig.DraftViewLocation>();
EdmDraw.EdmConfig.DraftViewLocation ViewTypeEACT_TOP = null;
EdmDraw.EdmConfig.DraftViewLocation ViewTypeEACT_FRONT = null;
foreach (var item in draftViewLocations)
{
var viewType = EdmDraw.DrawBusiness.GetEumnViewType(item.ViewType);
switch (viewType)
{
case EdmDraw.ViewType.EACT_TOP:
{
ViewTypeEACT_TOP = item;
}
break;
case EdmDraw.ViewType.EACT_FRONT:
{
ViewTypeEACT_FRONT = item;
}
break;
case EdmDraw.ViewType.EACT_BOTTOM_FRONT:
{
CreateEACT_BOTTOM_FRONTView(
ds,
new List <TaggedObject> {
selectedObj
},
new Snap.Position(item.LocationX, item.LocationY),
new Snap.Position(item.SizeX, item.SizeY),
electrode,
edmConfig
);
}
break;
case EdmDraw.ViewType.EACT_BOTTOM:
{
CreateEACT_BOTTOMView(
ds,
new List <TaggedObject> {
selectedObj
},
new Snap.Position(item.LocationX, item.LocationY),
new Snap.Position(item.SizeX, item.SizeY),
electrode, edmConfig
);
}
break;
case EdmDraw.ViewType.EACT_BOTTOM_ISOMETRIC:
{
CreateEACT_BOTTOM_ISOMETRICView(
ds,
new List <TaggedObject> {
selectedObj
},
new Snap.Position(item.LocationX, item.LocationY),
new Snap.Position(item.SizeX, item.SizeY)
, edmConfig
);
}
break;
case EdmDraw.ViewType.EACT_ISOMETRIC:
{
CreateEACT_ISOMETRICView(
ds,
new List <TaggedObject> {
steel
},
new Snap.Position(item.LocationX, item.LocationY),
new Snap.Position(item.SizeX, item.SizeY)
, edmConfig
);
}
break;
}
}
CreateNodeInfo(electrode, edmConfig);
var ps = new List <List <PositioningInfo> >();
if (edmConfig.PageCount <= 0)
{
ps.Add(positionings);
}
else
{
var ceiling = Math.Ceiling((double)(positionings.Count * 1.0 / edmConfig.PageCount));
var tempV = positionings.Count % edmConfig.PageCount;
for (int i = 0; i < ceiling; i++)
{
ps.Add(positionings.Skip(i * edmConfig.PageCount).Take(
i == ceiling - 1 && tempV != 0 ? tempV : edmConfig.PageCount
).ToList());
}
}
foreach (var item in ps)
{
SetIsHidden(positionings, steel);
var pdfName = ds.Name;
if (ps.Count > 1)
{
pdfName += "_" + (ps.IndexOf(item) + 1);
}
var deleteObj = new List <NXOpen.Tag>();
if (ViewTypeEACT_TOP != null)
{
var topView = CreateEACT_TOPView(
ds,
steel,
new Snap.Position(ViewTypeEACT_TOP.LocationX, ViewTypeEACT_TOP.LocationY),
new Snap.Position(ViewTypeEACT_TOP.SizeX, ViewTypeEACT_TOP.SizeY),
item,
edmConfig
);
deleteObj.Add(topView.Tag);
}
if (ViewTypeEACT_FRONT != null)
{
var itemE = item.First().Electrode;
var frontView = CreateEACT_FRONTView(
ds,
new List <NXOpen.TaggedObject> {
steel, itemE.ElecBody
},
new Snap.Position(ViewTypeEACT_FRONT.LocationX, ViewTypeEACT_FRONT.LocationY),
new Snap.Position(ViewTypeEACT_FRONT.SizeX, ViewTypeEACT_FRONT.SizeY),
itemE,
edmConfig
);
deleteObj.Add(frontView.Tag);
}
deleteObj.AddRange(CreateTable(edmConfig, item));
SetIsHidden(positionings, steel, false);
ds.GetDraftingViews().ToList().ForEach(u => {
var ufSession = NXOpen.UF.UFSession.GetUFSession();
ufSession.Draw.UpdateOneView(ds.Tag, u.Tag);
});
var result = EdmDraw.Helper.ExportPDF(ds, pdfName);
var info = electrode.GetElectrodeInfo();
CommonInterface.FtpHelper.FtpUpload("EDM2D", new ElecManage.MouldInfo {
MODEL_NUMBER = string.IsNullOrEmpty(info.EACT_MODELNO)? "UNKOWN_MODELNO" : info.EACT_MODELNO
}, result, info.Elec_Name, _ConfigData);
if (ps.Count > 1)
{
deleteObj.ForEach(u => {
Snap.NX.NXObject.Wrap(u).Delete();
});
}
}
//if (isAutoMode)
//{
// Snap.NX.NXObject.Wrap(ds.Tag).Delete();
//}
}
public override void Update(NXOpen.BlockStyler.UIBlock block)
{
RefreshUI();
var body = selectCuprum.SelectedObjects.FirstOrDefault() as Snap.NX.Body;
if (block == btnAutoSelectPoint.NXOpenBlock)
{
if (body != null)
{
AutoSelectPoint();
RefreshUI();
}
}
else if (block == selectCuprum.NXOpenBlock)
{
_electrode = null;
if (body != null)
{
var elec = ElecManage.Electrode.GetElectrode(body);
if (elec != null)
{
elec.InitAllFace();
_electrode = elec;
}
else
{
selectCuprum.SelectedObjects = new Snap.NX.NXObject[] { };
NXOpen.UF.UFSession.GetUFSession().Ui.DisplayMessage("该电极无法识别", 1);
}
}
}
else if (block == toggle0.NXOpenBlock)
{
UFDisp();
DeleteNodes();
}
else if (block == btnDown.NXOpenBlock)
{
var node = GetSelectNode();
if (node != null)
{
var list = GetNodes();
var index = list.IndexOf(node) + 1;
index = index > list.Count - 1 ? list.Count - 1 : index;
list.Remove(node);
list.Insert(index, node);
UFDisp(GetPointDatasFromTree(list));
}
}
else if (block == btnUP.NXOpenBlock)
{
var node = GetSelectNode();
if (node != null)
{
var list = GetNodes();
var index = list.IndexOf(node) - 1;
index = index < 0 ? 0 : index;
list.Remove(node);
list.Insert(index, node);
UFDisp(GetPointDatasFromTree(list));
}
}
else if (block == btnRemove.NXOpenBlock)
{
var node = GetSelectNode();
if (node != null)
{
var pd = GetPointData(node);
if (pd != null && pd.PointType == PointType.HeadFace)
{
var list = GetNodes();
list.Remove(node);
UFDisp(GetPointDatasFromTree(list));
theUI.NXMessageBox.Show("提示", NXOpen.NXMessageBox.DialogType.Information, "删除成功！");
}
else
{
theUI.NXMessageBox.Show("提示", NXOpen.NXMessageBox.DialogType.Information, "无法删除该点！");
}
}
}
else if (block == selectionPoint.NXOpenBlock)
{
if (body != null && selectionPoint.SelectedObjects.Count() > 0)
{
PointData data = null;
ComponentHelper(() =>
{
data = CMMBusiness.IsInterveneBySelPoint(_electrode, selectionPoint.PickPoint, _config);
});
if (data != null)
{
var points = GetPointDatasFromTree();
points.Add(data);
UFDisp(points);
}
else
{
theUI.NXMessageBox.Show("提示", NXOpen.NXMessageBox.DialogType.Information, "无法取该点，请重新选点！");
}
}
selectionPoint.SelectedObjects = new Snap.NX.NXObject[] { };
}
else if (block == btnExport.NXOpenBlock)
{
if (body != null)
{
var list = new List <PointData>();
GetNodes().ForEach(u =>
{
list.Add(Newtonsoft.Json.JsonConvert.DeserializeObject <PointData>(u.GetNodeData().GetString(_propertyName)));
});
if (list.Count > 0)
{
//导出
CMMBusiness.WriteCMMFileByPointData(_electrode, list, _config);
NXOpen.UF.UFSession.GetUFSession().Ui.DisplayMessage("导出成功", 1);
}
}
else
{
//ImportPart( Path.Combine(AppDomain.CurrentDomain.BaseDirectory, "CMM_INSPECTION", enumSelectTool.ValueAsString));
}
}
}