Esempio n. 1
0
        public static S7Block GetAWLBlock(byte[] MC7Code, MnemonicLanguage MnemoricLanguage, S7ProgrammFolder prjBlkFld)
        {
            var retBlock = ParseBlockHeaderAndFooterFromMC7(MC7Code, MnemoricLanguage);


            if (retBlock != null)
            {
                int IntfStart       = MC7Start_or_DBBodyStart + retBlock.CodeSize + 3;
                int IntfLength      = BitConverter.ToUInt16(MC7Code, IntfStart) + 4;
                int InitialValStart = IntfStart + IntfLength;

                if (retBlock.BlockType == PLCBlockType.DB || retBlock.BlockType == PLCBlockType.SDB) //Block is an Data block or System Data block
                {
                    //Instance DB??
                    if (MC7Code[MC7Start_or_DBBodyStart + retBlock.CodeSize] == 0x0a)
                    {
                        ((S7DataBlock)retBlock).IsInstanceDB = true;
                        ((S7DataBlock)retBlock).FBNumber     = BitConverter.ToUInt16(MC7Code, MC7Start_or_DBBodyStart + retBlock.CodeSize + 1);
                    }

                    List <string> tmp            = new List <string>(); //to hold the temporary parameter list while parsing the Interface
                    var           interfaceBytes = new byte[IntfLength + 3];
                    var           actualValues   = new byte[retBlock.CodeSize];

                    Array.Copy(MC7Code, IntfStart - 3, interfaceBytes, 0, IntfLength + 3); //-3 because of in the project file in the structere ssbpart is also the same structure with this 4 bytes!!
                    Array.Copy(MC7Code, MC7Start_or_DBBodyStart, actualValues, 0, retBlock.CodeSize);

                    //Some blocks do not have current values. These can be identified by checking the MC7 code length.
                    //the Interface Header is structured as follows
                    ///     0       Block Type: 0x05 (DB) 0x10 (DI),...
                    ///     1-2     Again Block Number or FB Number on a DI   (but bytes swapped)
                    ///     3-4     Interface Length minus this header (7 bytes)
                    ///     5-6     Start Value Length
                    byte[] startValues      = null;
                    int    startValueLength = BitConverter.ToUInt16(interfaceBytes, 5);

                    if (startValueLength > 0)
                    {
                        startValues = new byte[startValueLength];
                        Array.Copy(MC7Code, InitialValStart, startValues, 0, startValueLength);
                    }

                    //Parse the Interface from MC7 code
                    ((S7DataBlock)retBlock).StructureFromMC7 = Parameter.GetInterface(interfaceBytes, startValues, actualValues, ref tmp, retBlock.BlockType, ((S7DataBlock)retBlock).IsInstanceDB, retBlock);
                }
                else //Block is an code block (FB, FC or OB)
                {
                    var interfaceBytes = new byte[IntfLength + 3];
                    Array.Copy(MC7Code, IntfStart - 3, interfaceBytes, 0, IntfLength + 3); //-3 because of in the project file in the structere ssbpart is also the same structure with this 4 bytes!!

                    //Some blocks do not have current values. These can be identified by checking the MC7 code length.
                    //the Interface Header is structured as follows
                    ///     0       Block Type: 0x05 (DB) 0x10 (DI),...
                    ///     1-2     Again Block Number or FB Number on a DI   (but bytes swapped)
                    ///     3-4     Interface Length minus this header (7 bytes)
                    ///     5-6     Start Value Length
                    byte[] startValues      = null;
                    int    startValueLength = BitConverter.ToUInt16(interfaceBytes, 5);

                    if (retBlock.BlockType == PLCBlockType.FB && startValueLength > 0) //only FB's my have start values, even then they might not exist if none are defined (length = 0)
                    {
                        startValues = new byte[startValueLength];
                        Array.Copy(MC7Code, InitialValStart, startValues, 0, startValueLength);
                    }

                    List <string> ParaList = new List <string>();
                    ((S7FunctionBlock)retBlock).Parameter = Parameter.GetInterface(interfaceBytes, startValues, null /*there are never Current values in code blocks*/, ref ParaList, retBlock.BlockType, false, retBlock);

                    int[] Networks = null;

                    //Only if there are network descriptions. This generall only happens when the Block is empty and does not contain any code.
                    //the Network list always starts after the Interface of the block and have the following format

                    if (retBlock.SegmentTableSize > 0)
                    {
                        Networks = NetWork.GetNetworks(MC7Start_or_DBBodyStart + retBlock.CodeSize + retBlock.InterfaceSize, MC7Code);
                    }
                    ((S7FunctionBlock)retBlock).AWLCode = MC7toAWL.GetAWL(MC7Start_or_DBBodyStart, retBlock.CodeSize - 2, (int)MnemoricLanguage, MC7Code, Networks, ParaList, prjBlkFld, (S7FunctionBlock)retBlock, ((S7FunctionBlock)retBlock).Parameter);

                    ((S7FunctionBlock)retBlock).Networks = NetWork.GetNetworksList((S7FunctionBlock)retBlock);
                }
            }
            return(retBlock);
        }
Esempio n. 2
0
        public static S7Block GetAWLBlock(byte[] MC7Code, int MnemoricLanguage, S7ProgrammFolder prjBlkFld)
        {
            /*
             * string ttmp = "";
             * for (int i = 0; i < MC7Code.Length; i++)
             * {
             *  ttmp += MC7Code[i].ToString("X").PadLeft(2, '0');
             * }
             * MessageBox.Show(ttmp);
             * Clipboard.SetText(ttmp);
             */

            S7Block retBlock = null;

            if (MC7Code != null)
            {
                if ((MC7Code[5] == 0x0a) || (MC7Code[5] == 0x0b))
                {
                    retBlock = (S7Block) new S7DataBlock();
                }
                else
                {
                    retBlock = (S7Block) new S7FunctionBlock();
                }

                const int MC7Start_or_DBBodyStart = 36;

                /*
                 * Description of a MC7 Block (Common)
                 *
                 * 0,1     = Signature ('pp')
                 * 2       = Block Version
                 * 3       = Block Attribute (.0 not unlinked, .1 standart block + know how protect, .3 know how protect, .5 not retain
                 * 4       = Block Language
                 * 5       = Block Type (a=DB, b=SDB)
                 * 6,7     = Block Number
                 * 8-11    = Block Length
                 * 12-15   = Block Password
                 * 16-21   = Last Modified
                 * 22-27   = Last Interface Change
                 * 28,29   = Interface length or DB Body (actual Values Part) length
                 * 30,31   = Segment Table Length?  (Normaly 0 on a DB) (Length of networks!)
                 * 32,33   = Local Data Length? (Normaly 0 on a DB)
                 * 34,35   = MC7-Length or DB Body (definitions/initial values)
                 */

                /*
                 * Description of a MC7 Block (Function - Block)
                 * 36-xx     = AWL
                 * xx+1,     = 0x01
                 * xx+2,xx+3 = Again Block number, Zero on OB            (but bytes swapped)
                 * xx+4,xx+5 = Interface Length (from xx+6 to yy)
                 * xx+6,xx+7 = Interface Blocks Count (In,Out,Satic,TMP etc) * 2
                 * xx+8,xx+9 = allways Zero
                 * xx+10-yy  = Interface
                 * yy+1-zz   = Networks
                 *
                 */

                /*
                 * Description of a MC7 Block (Data - Block)
                 * 36-xx   = AWL
                 * xx+1,     = 0x05 (DB) 0x10 (DI)
                 * xx+2,xx+3 = Again Block Number or FB Number on a DI   (but bytes swapped)
                 * xx+4,xx+5 = Interface Length
                 * xx+6-yy   = Interface
                 * yy-zz   = Start-Values
                 * xx      = Nertworks
                 */

                retBlock.BlockVersion        = Convert.ToString(MC7Code[2] - 1);
                retBlock.BlockAttribute      = Convert.ToString(MC7Code[3] - 1);
                retBlock.BlockLanguage       = (DataTypes.PLCLanguage)MC7Code[4]; // Enum.Parse(typeof(DataTypes.PLCLanguage), Helper.GetLang(MC7Code[4]));
                retBlock.MnemonicLanguage    = (MnemonicLanguage)MnemoricLanguage;
                retBlock.BlockType           = Helper.GetPLCBlockType(MC7Code[5]);
                retBlock.BlockNumber         = (MC7Code[6] * 0x100) + MC7Code[7];
                retBlock.Length              = libnodave.getU32from(MC7Code, 8);
                retBlock.Password            = new byte[] { MC7Code[12], MC7Code[13], MC7Code[14], MC7Code[15] };
                retBlock.LastCodeChange      = Helper.GetDT(MC7Code[16], MC7Code[17], MC7Code[18], MC7Code[19], MC7Code[20], MC7Code[21]);
                retBlock.LastInterfaceChange = Helper.GetDT(MC7Code[22], MC7Code[23], MC7Code[24], MC7Code[25], MC7Code[26], MC7Code[27]);

                int InterfaceLength_or_DBActualValuesLength = libnodave.getU16from(MC7Code, 28);
                retBlock.SegmentTableSize = libnodave.getU16from(MC7Code, 30); //(Length of networks?)
                int LocalDataLength           = libnodave.getU16from(MC7Code, 32);
                int MC7Length_or_DBBodyLength = libnodave.getU16from(MC7Code, 34);
                int IntfStart    = MC7Start_or_DBBodyStart + MC7Length_or_DBBodyLength + 3;
                int IntfLength   = BitConverter.ToUInt16(MC7Code, IntfStart) + 2;
                int IntfValStart = IntfStart + IntfLength + 2;

                retBlock.InterfaceSize = InterfaceLength_or_DBActualValuesLength;
                retBlock.LocalDataSize = LocalDataLength;
                retBlock.CodeSize      = MC7Length_or_DBBodyLength;

                int FooterStart = MC7Start_or_DBBodyStart + MC7Length_or_DBBodyLength + InterfaceLength_or_DBActualValuesLength + retBlock.SegmentTableSize;
                retBlock.Author  = Helper.GetString(FooterStart + 0, 8, MC7Code);
                retBlock.Family  = Helper.GetString(FooterStart + 8, 8, MC7Code);
                retBlock.Name    = Helper.GetString(FooterStart + 16, 8, MC7Code);
                retBlock.Version = Helper.GetVersion(MC7Code[FooterStart + 24]);

                if ((MC7Code[5] == 0x0a) || (MC7Code[5] == 0x0b))
                {
                    //Instance DB??
                    if (MC7Code[MC7Start_or_DBBodyStart + MC7Length_or_DBBodyLength] == 0x0a)
                    {
                        ((S7DataBlock)retBlock).IsInstanceDB = true;
                        ((S7DataBlock)retBlock).FBNumber     = BitConverter.ToUInt16(MC7Code, MC7Start_or_DBBodyStart + MC7Length_or_DBBodyLength + 1);
                    }
                    //((PLCDataBlock) retBlock).Structure = MC7toDB.GetDBInterface(IntfStart, IntfLength, AWLStart, IntfValStart, MC7Code);

                    /*var interf = new byte[IntfLength];
                     * Array.Copy(MC7Code, IntfStart, interf, 0, IntfLength);
                     * string wr = "";
                     * for (int i=0;i<interf.Length-1;i=i+2)
                     * {
                     *  wr += interf[i+1].ToString("X").PadLeft(2, '0');
                     *  wr += interf[i].ToString("X").PadLeft(2, '0');
                     * }
                     * wr = wr;*/
                    List <string> tmp            = new List <string>();
                    var           interfaceBytes = new byte[IntfLength + 3];
                    var           actualValues   = new byte[MC7Length_or_DBBodyLength];
                    Array.Copy(MC7Code, IntfStart - 3, interfaceBytes, 0, IntfLength + 3); //-3 because of in the project file in the structere ssbpart is also the same structure with this 4 bytes!!
                    Array.Copy(MC7Code, MC7Start_or_DBBodyStart, actualValues, 0, MC7Length_or_DBBodyLength);

                    ((S7DataBlock)retBlock).StructureFromMC7 = Parameter.GetInterface(interfaceBytes, actualValues, ref tmp, retBlock.BlockType, ((S7DataBlock)retBlock).IsInstanceDB, retBlock);
                }
                else
                {
                    var interfaceBytes = new byte[IntfLength + 3];
                    Array.Copy(MC7Code, IntfStart - 3, interfaceBytes, 0, IntfLength + 3); //-3 because of in the project file in the structere ssbpart is also the same structure with this 4 bytes!!

                    List <string> ParaList = new List <string>();
                    ((S7FunctionBlock)retBlock).Parameter = Parameter.GetInterface(interfaceBytes, null, ref ParaList, retBlock.BlockType, false, retBlock);

                    int[] Networks;
                    Networks = NetWork.GetNetworks(MC7Start_or_DBBodyStart + MC7Length_or_DBBodyLength + InterfaceLength_or_DBActualValuesLength, MC7Code);
                    ((S7FunctionBlock)retBlock).AWLCode = MC7toAWL.GetAWL(MC7Start_or_DBBodyStart, MC7Length_or_DBBodyLength - 2, MnemoricLanguage, MC7Code, Networks, ParaList, prjBlkFld);

                    ((S7FunctionBlock)retBlock).Networks = NetWork.GetNetworksList((S7FunctionBlock)retBlock);
                }
            }
            return(retBlock);
        }