// Callback invoked if the executable startup has failed
private void ExeStartupFailed(string stderr, string logfilePath)
{
// Unhighlight tree and remove item from synced components
if (LastStartedInstance != null)
{
try
{
addon.Project.BeginTransactionInNewTerr();
ISIS.GME.Common.Interfaces.Base model = CyphyMetaLinkUtils.GetComponentAssemblyByGuid(addon.Project, LastStartedInstance.Id);
if (model == null)
{
model = CyphyMetaLinkUtils.GetComponentByAvmId(addon.Project, LastStartedInstance.Id);
SendDisinterest(true, LastStartedInstance.InstanceId);
}
if (model != null)
{
AssemblyID = null;
HighlightInTree(model, 0);
SendDisinterest(true, LastStartedInstance.InstanceId);
}
syncedComponents.Remove(LastStartedInstance.Id);
// FIXME designIdToCadAssemblyXml.Remove(
}
finally
{
addon.Project.AbortTransaction();
}
}
LastStartedInstance = null;
ShowStartupDialog(false);
}
public void StartCreoEmpyMode()
{
string tmpid = Guid.NewGuid().ToString();
SyncedComponentData cdata = new SyncedComponentData()
{
Type = SyncedComponentData.EditType.Empty,
WorkingDir = GetProjectDir(),
InstanceId = (IdCounter++).ToString(),
Id = tmpid
};
syncedComponents.Add(tmpid, cdata);
StartAssemblyExe(CreoOpenMode.OPEN_EMPTY, tmpid, false, "");
SendInterest(null, cdata.InstanceId);
}
private void ProcessEditMessage(MetaLinkProtobuf.Edit message)
{
if (GMEConsole == null)
{
GMEConsole = GMEConsole.CreateFromProject(addon.Project);
}
// This is the first message from Creo, hide the Startup Dialog
if (StartupDialog.Visible && message.origin.Contains(CadAssemblyOrigin) &&
message.editMode == Edit.EditMode.INTEREST && message.topic.Count == 2 &&
message.topic[1] == LastStartedGuid)
{
ShowStartupDialog(false);
}
// Drop a warning message to the console if it's a suspicious response
if (message.actions.Count > 0)
{
foreach (var action in message.actions)
{
foreach (var notice in action.notices)
{
if (notice.noticeMode == Notice.NoticeMode.DONE)
{
GMEConsole.Info.WriteLine("Done response from Meta-Link: " + notice.msg);
}
else if (notice.noticeMode == Notice.NoticeMode.ACK)
{
GMEConsole.Info.WriteLine("Ack response from Meta-Link: " + notice.msg);
}
else if (notice.noticeMode == Notice.NoticeMode.WARN)
{
GMEConsole.Warning.WriteLine("Warn response from Meta-Link: " + notice.msg);
}
}
}
}
if (message.mode.SequenceEqual(new Edit.EditMode[] { Edit.EditMode.INTEREST, MetaLinkProtobuf.Edit.EditMode.NOTICE }))
{
// Start Creo in design editing mode
if (message.topic.Count == 2 && message.topic[0] == CadAssemblyTopic
&& message.notices.Count == 1 && message.notices[0].noticeMode == Notice.NoticeMode.ACK)
{
// message.topic[1] is the assembly GUID
string assemblyGuid = Guid.Parse(message.topic[1]).ToString();
string exeparams = "";
addon.Project.BeginTransactionInNewTerr();
try
{
exeparams = GetStartupParams(assemblyGuid);
}
finally
{
addon.Project.AbortTransaction();
}
StartAssemblyExe(CreoOpenMode.OPEN_COMPONENT, assemblyGuid, true, exeparams);
}
// Start Creo in AVM component editing mode
if (message.topic.Count >= 2 && message.topic[0] == ComponentUpdateTopic
&& message.notices.Count == 1 && message.notices[0].noticeMode == Notice.NoticeMode.ACK)
{
Action<MetaLinkProtobuf.Edit> action;
if (noticeActions.TryGetValue(message.guid, out action))
{
noticeActions.Remove(message.guid);
action(message);
}
}
}
if (message.mode.Count > 0 && message.mode.Last() == MetaLinkProtobuf.Edit.EditMode.NOTICE)
{
foreach (var notice in message.actions.SelectMany(a => a.notices)
.Where(n => n.noticeMode == Notice.NoticeMode.FAULT || n.noticeMode == Notice.NoticeMode.FAIL ||
n.noticeMode == Notice.NoticeMode.REJECT))
{
GMEConsole.Error.WriteLine("Meta-Link error: " + notice.msg);
}
}
if (message.origin.Contains(GMEOrigin)) // ignore messages from ourselves
return;
// DISINTEREST: The user closed Creo (component)
if (message.topic.Count == 2 && (message.topic[0] == ComponentUpdateTopic || message.topic[0] == CadPassiveTopic) &&
message.mode.SequenceEqual(new Edit.EditMode[] { Edit.EditMode.DISINTEREST }))
{
if (message.topic[0] == ComponentUpdateTopic)
{
String componentAVMID = message.topic[1];
//componentEditMessages.Remove(componentAVMID);
syncedComponents.Remove(componentAVMID);
SendDisinterest(ComponentUpdateTopic, componentAVMID);
addon.Project.BeginTransactionInNewTerr();
try
{
var component = CyphyMetaLinkUtils.GetComponentByAvmId(addon.Project, componentAVMID);
if (component != null)
{
HighlightInTree(component, 0);
}
}
finally
{
addon.Project.AbortTransaction();
}
}
else
{
syncedComponents.Remove(""); // CAD has been started in an empty mode
}
}
// DISINTEREST: The user closed Creo (design)
if (message.topic.Count == 2 && message.topic[0] == CadAssemblyTopic &&
message.mode.SequenceEqual(new Edit.EditMode[] { Edit.EditMode.DISINTEREST }))
{
Guid componentAssemblyID = Guid.Parse(message.topic[1]);
/*try{
Directory.Delete(syncedComponents[componentAssemblyID.ToString()].WorkingDir);
} catch (Exception e)
{
GMEConsole.Warning.WriteLine("Unable to delete working directory: " + e.Message);
}*/
syncedComponents.Remove(componentAssemblyID.ToString());
SendDisinterest(CadAssemblyTopic, message.topic[1]);
addon.Project.BeginTransactionInNewTerr();
try
{
CyPhyML.ComponentAssembly assembly = CyphyMetaLinkUtils.GetComponentAssemblyByGuid(addon.Project, AssemblyID);
if (assembly != null)
{
HighlightInTree(assembly, 0);
}
}
finally
{
addon.Project.AbortTransaction();
}
AssemblyID = null;
}
if (message.topic.Count == 2 && message.topic[0] == ComponentAnalysisPointTopic &&
message.mode.SequenceEqual(new Edit.EditMode[] { Edit.EditMode.POST }))
{
foreach (var action in message.actions)
{
ProcessAnalysisPointMessage(message.topic[1], action);
}
}
// Design edit message (insert/select/discard)
if (message.topic.Count == 2 && message.topic[0] == CadAssemblyTopic &&
message.mode.SequenceEqual(new Edit.EditMode[] { Edit.EditMode.POST }))
{
foreach (var action in message.actions)
{
if (action.actionMode == MetaLinkProtobuf.Action.ActionMode.INSERT && action.payload != null)
{
// Add an AVM component
ProcessEditInsert(message.topic[1], action);
}
if (action.actionMode == MetaLinkProtobuf.Action.ActionMode.SELECT && action.payload != null)
{
// Select a component ref
ProcessEditSelect(message.topic[1], action);
}
if (action.actionMode == MetaLinkProtobuf.Action.ActionMode.DISCARD)
{
// Remove a component ref
ProcessEditDiscard(message.topic[1], action);
}
}
}
// Re-sync
if (message.topic.Count == 2 && message.topic[0] == ResyncTopic &&
message.mode.SequenceEqual(new Edit.EditMode[] { Edit.EditMode.POST }))
{
ProcessResync(message.topic[1]);
}
if (message.topic.Count == 2 && message.topic[0] == CadAssemblyTopic &&
message.mode.SequenceEqual(new Edit.EditMode[] { Edit.EditMode.INTEREST }))
{
string designId = message.topic[1];
string xml;
if (designIdToCadAssemblyXml.TryGetValue(designId, out xml))
{
addon.Project.BeginTransactionInNewTerr();
try
{
SendCadAssemblyXml(xml, designId, false);
SaveCadAssemblyXml(xml, designId);
}
finally
{
addon.Project.AbortTransaction();
}
}
else
{
GMEConsole.Warning.WriteLine("MetaLink: unknown assembly " + designId);
}
}
// Request component list message from Creo
if (message.topic.Count > 0 && message.topic[0] == ComponentManifestTopic &&
message.mode.SequenceEqual(new Edit.EditMode[] { Edit.EditMode.INTEREST }))
{
addon.Project.BeginTransactionInNewTerr();
try
{
SendComponentManifest();
}
finally
{
addon.Project.AbortTransaction();
}
}
// Update AVM Component with the information from Creo
if (message.mode.SequenceEqual(new Edit.EditMode[] { Edit.EditMode.POST }) &&
message.topic.Count >= 2 && message.topic[0] == ComponentUpdateTopic && message.actions.Count == 1 &&
message.actions[0].alien != null && message.actions[0].alien.encodingMode == Alien.EncodingMode.XML)
{
string componentId = message.topic[1];
string component_xml = Encoding.UTF8.GetString(message.actions[0].alien.encoded);
ProcessAVMComponentUpdate(componentId, component_xml);
}
// Some type of AVM component update (INSERT, DISCARD, etc.)
if (message.mode.SequenceEqual(new Edit.EditMode[] { Edit.EditMode.POST }) &&
message.topic.Count >= 2 && message.topic[0] == ComponentUpdateTopic && message.actions.Count >= 1)
{
string componentId = message.topic[1];
foreach (var action in message.actions)
{
if (action.actionMode == MetaLinkProtobuf.Action.ActionMode.INSERT && action.payload != null)
{
ProcessAVMComponentInsert(message.topic[1], action);
}
}
}
// Create new AVM component
if (message.mode.SequenceEqual(new Edit.EditMode[] { Edit.EditMode.POST }) &&
message.topic.Count <= 2 && message.topic[0] == ComponentCreateTopic && message.actions.Count == 1 &&
message.actions[0].alien != null && message.actions[0].alien.encodingMode == Alien.EncodingMode.XML)
{
string component_xml = Encoding.UTF8.GetString(message.actions[0].alien.encoded);
ProcessAVMComponentCreate(component_xml, message.topic.Count>1?message.topic[1]:null);
}
// Connect component within a design
if (message.mode.SequenceEqual(new Edit.EditMode[] { Edit.EditMode.POST }) &&
message.topic.Count >= 1 && message.topic[0] == ConnectTopic)
{
try
{
string conn1 = message.actions[0].payload.components[1].ComponentID.Substring(0, message.actions[0].payload.components[1].ComponentID.IndexOf('_'));
string ref1 = message.actions[0].payload.components[1].ComponentID.Substring(message.actions[0].payload.components[1].ComponentID.IndexOf('_')+1);
string conn2 = message.actions[0].payload.components[2].ComponentID.Substring(0, message.actions[0].payload.components[2].ComponentID.IndexOf('_'));
string ref2 = message.actions[0].payload.components[2].ComponentID.Substring(message.actions[0].payload.components[2].ComponentID.IndexOf('_') + 1);
ProcessConnect(message.actions[0].payload.components[0].ComponentID, conn1, ref1, conn2, ref2);
}
catch (Exception ex)
{
GMEConsole.Warning.WriteLine("Error during processing " + ConnectTopic + " message: " + ex.Message);
}
}
// Send AVM component update to Creo
if (message.mode.SequenceEqual(new Edit.EditMode[] { Edit.EditMode.INTEREST }) &&
message.topic.Count >= 2 && message.topic[0] == ComponentUpdateTopic)
{
addon.Project.BeginTransactionInNewTerr();
try
{
CyPhyML.Component avmcomp = CyphyMetaLinkUtils.FindAVMComponent(addon.Project, message.topic[1], null);
if (avmcomp == null)
throw new Exception(String.Format("Can't find AVM component to open with id {0}.", message.topic[1]));
var outmessage = CreateComponentEditMessage(avmcomp, CyphyMetaLinkUtils.FindCADModelObject(avmcomp));
if (outmessage != null)
{
SendInterest(null, ResyncTopic, message.topic[1]);
bridgeClient.SendToMetaLinkBridge(outmessage);
}
else
{
GMEConsole.Warning.WriteLine("MetaLink: don't know about component " + message.topic[1]);
}
// This is a recently created component
if (!syncedComponents.ContainsKey(avmcomp.Attributes.AVMID))
{
SyncedComponentData syncedCompData = new SyncedComponentData()
{
Type = SyncedComponentData.EditType.Component
};
syncedComponents.Add(avmcomp.Attributes.AVMID, syncedCompData);
HighlightInTree(avmcomp, 1);
}
}
finally
{
addon.Project.AbortTransaction();
}
}
}
public void StartEditingComponent(CyPhyML.Component component, MgaFCO cadModel, bool createNewComponent)
{
addon.Project.BeginTransactionInNewTerr();
string avmid = component.Attributes.AVMID;
SyncedComponentData syncedCompData;
try
{
if (syncedComponents.TryGetValue(avmid, out syncedCompData))
{
GMEConsole.Error.WriteLine("This component is already open in Creo, AVMID: " + component.Attributes.AVMID);
return;
}
else
{
}
List <string> errorList = new List <string>();
VerifyCADResources(component, errorList);
if (errorList.Count != 0)
{
foreach (var err in errorList)
{
GMEConsole.Error.WriteLine(err);
}
System.Windows.Forms.MessageBox.Show("Errors found in component. Can't open in Meta-Link. Please check the log.");
return;
}
CyPhyML.Component newComponent = CyphyMetaLinkUtils.CopyComponent(component, createNewComponent);
avmid = newComponent.Attributes.AVMID;
if (createNewComponent && GMEConsole.gme != null)
{
// META-2109: open copy in model editor, select in Browser
try
{
string newComponentID = newComponent.ID;
bool closeModelEditor = false;
if (GMEConsole.gme.OleIt != null)
{
closeModelEditor = GMEConsole.gme.OleIt.MgaModel.ID == component.ID;
}
SyncControl.BeginInvoke((System.Action) delegate
{
try
{
if (closeModelEditor)
{
GMEConsole.gme.OleIt.Close();
}
GMEConsole.gme.ShowFCO((MgaFCO)newComponent.Impl, false);
object browser = GetBrowser();
if (browser != null)
{
browser.GetType().InvokeMember("FocusItem", System.Reflection.BindingFlags.InvokeMethod, null, browser, new object[] { newComponentID });
}
}
catch (Exception) { }
});
}
catch (Exception) { }
}
HighlightInTree(newComponent, 1);
}
finally
{
addon.Project.CommitTransaction();
}
syncedCompData = new SyncedComponentData()
{
Type = SyncedComponentData.EditType.Component,
InstanceId = (IdCounter++).ToString(),
Id = avmid
};
syncedComponents.Add(avmid, syncedCompData);
SendInterest(StartComponentEditAction, syncedCompData.InstanceId);
}
/// <summary>
/// The main dispatch handler for incoming messages
/// </summary>
/// <param name="message"></param>
private void ProcessEditMessage(MetaLinkProtobuf.Edit message)
{
if (GMEConsole == null)
{
GMEConsole = GMEConsole.CreateFromProject(addon.Project);
}
// This is the first message from Creo, hide the CAD Startup Dialog
if (StartupDialog.Visible && message.origin.Contains(CadAssemblyOrigin) &&
message.editMode == Edit.EditMode.INTEREST && message.topic.Count == 1 &&
message.topic[0] == LastStartedInstance.InstanceId)
{
ShowStartupDialog(false);
}
// Drop a message to the console with the acknowledgement of a previous message
if (message.actions.Count > 0)
{
foreach (var action in message.actions)
{
foreach (var notice in action.notices)
{
if (notice.noticeMode == Notice.NoticeMode.DONE)
{
GMEConsole.Info.WriteLine("Done response from Meta-Link: " + notice.msg);
}
else if (notice.noticeMode == Notice.NoticeMode.ACK)
{
GMEConsole.Info.WriteLine("Ack response from Meta-Link: " + notice.msg);
}
else if (notice.noticeMode == Notice.NoticeMode.WARN)
{
GMEConsole.Warning.WriteLine("Warn response from Meta-Link: " + notice.msg);
}
}
}
}
if (!TestMode && message.mode.SequenceEqual(new Edit.EditMode[] { Edit.EditMode.INTEREST, MetaLinkProtobuf.Edit.EditMode.NOTICE }))
{
// Start Creo in design editing mode
if (message.notices.Count == 1 && message.notices[0].noticeMode == Notice.NoticeMode.ACK)
{
SyncedComponentData cdata = GetSyncedCompDataByInstanceId(message.topic[0]);
if (cdata == null)
{
GMEConsole.Error.WriteLine("Fatal error: can't find component data for synced component: " + message.topic[0]);
}
else if (cdata.Type == SyncedComponentData.EditType.Design)
{
// message.topic[1] is the assembly GUID
string assemblyGuid = Guid.Parse(cdata.Id).ToString();
string exeparams = "";
addon.Project.BeginTransactionInNewTerr();
try
{
exeparams = GetStartupParams(assemblyGuid);
}
finally
{
addon.Project.AbortTransaction();
}
StartAssemblyExe(CreoOpenMode.OPEN_COMPONENT, assemblyGuid, true, exeparams);
}
else
{
Action<MetaLinkProtobuf.Edit> action;
if (noticeActions.TryGetValue(message.guid, out action))
{
noticeActions.Remove(message.guid);
action(message);
}
}
}
}
// Write message to console if it's an error response
if (message.mode.Count > 0 && message.mode.Last() == MetaLinkProtobuf.Edit.EditMode.NOTICE)
{
foreach (var notice in message.actions.SelectMany(a => a.notices)
.Where(n => n.noticeMode == Notice.NoticeMode.FAULT || n.noticeMode == Notice.NoticeMode.FAIL))
{
GMEConsole.Error.WriteLine("Meta-Link error: " + notice.msg);
}
}
// ignore messages from ourselves
if (message.origin.Contains(GMEOrigin))
{
return;
}
// DISINTEREST: The user closed Creo (component)
if (message.mode.SequenceEqual(new Edit.EditMode[] { Edit.EditMode.DISINTEREST }))
{
SyncedComponentData cdata = GetSyncedCompDataByInstanceId(message.topic[0]);
if (cdata.Type == SyncedComponentData.EditType.Component)
{
String componentAVMID = cdata.Id;
//componentEditMessages.Remove(componentAVMID);
syncedComponents.Remove(componentAVMID);
SendDisinterest(false, cdata.InstanceId);
addon.Project.BeginTransactionInNewTerr();
try
{
var component = CyphyMetaLinkUtils.GetComponentByAvmId(addon.Project, componentAVMID);
if (component != null)
{
HighlightInTree(component, 0);
}
}
finally
{
addon.Project.AbortTransaction();
}
}
else if (cdata.Type == SyncedComponentData.EditType.Empty)
{
syncedComponents.Remove(""); // CAD has been started in an empty mode
}
else
{
Guid componentAssemblyID = Guid.Parse(cdata.Id);
syncedComponents.Remove(componentAssemblyID.ToString());
SendDisinterest(true, cdata.InstanceId);
addon.Project.BeginTransactionInNewTerr();
try
{
CyPhyML.ComponentAssembly assembly = CyphyMetaLinkUtils.GetComponentAssemblyByGuid(addon.Project, AssemblyID);
if (assembly != null)
{
HighlightInTree(assembly, 0);
}
}
finally
{
addon.Project.AbortTransaction();
}
AssemblyID = null;
}
}
else
// Create analysis point
if (message.mode.SequenceEqual(new Edit.EditMode[] { Edit.EditMode.POST }) &&
message.actions.Count >= 1 && message.actions[0].actionMode == MetaLinkProtobuf.Action.ActionMode.CREATE_ANALYSIS_POINTS)
{
foreach (var action in message.actions)
{
ProcessAnalysisPointMessage(action.subjectID, action);
}
}
else
// Design edit message (insert/select/discard)
if (message.mode.SequenceEqual(new Edit.EditMode[] { Edit.EditMode.POST }) && message.actions.Count >= 1 &&
(message.actions[0].actionMode == MetaLinkProtobuf.Action.ActionMode.ADD_COMPONENT_TO_CYPHY_DESIGN ||
message.actions[0].actionMode == MetaLinkProtobuf.Action.ActionMode.SELECT_CYPHY_COMPONENT ||
message.actions[0].actionMode == MetaLinkProtobuf.Action.ActionMode.REMOVE_CYPHY_DESIGN_COMPONENT))
{
foreach (var action in message.actions)
{
if (action.actionMode == MetaLinkProtobuf.Action.ActionMode.ADD_COMPONENT_TO_CYPHY_DESIGN && action.payload != null)
{
// Add an AVM component
ProcessEditInsert(action.subjectID, action);
}
else if (action.actionMode == MetaLinkProtobuf.Action.ActionMode.SELECT_CYPHY_COMPONENT && action.payload != null)
{
// Select a component
ProcessEditSelect(action.subjectID, action);
}
else if (action.actionMode == MetaLinkProtobuf.Action.ActionMode.REMOVE_CYPHY_DESIGN_COMPONENT)
{
// Remove a component
ProcessEditDiscard(action.subjectID, action);
}
else
{
GMEConsole.Warning.WriteLine("Unknown action: " + message.ToString());
}
}
}
else
// Re-sync
if (message.mode.SequenceEqual(new Edit.EditMode[] { Edit.EditMode.POST }) &&
message.actions.Count >= 1 && message.actions[0].actionMode == MetaLinkProtobuf.Action.ActionMode.RESYNC)
{
ProcessResync(message.actions[0].subjectID);
}
else
// Send assembly/component info to the client
if (message.mode.SequenceEqual(new Edit.EditMode[] { Edit.EditMode.INTEREST }))
{
SyncedComponentData cdata = GetSyncedCompDataByInstanceId(message.topic[0]);
if (cdata.Type == SyncedComponentData.EditType.Component)
{
addon.Project.BeginTransactionInNewTerr();
try
{
CyPhyML.Component avmcomp = CyphyMetaLinkUtils.FindAVMComponent(addon.Project, cdata.Id, null);
if (avmcomp == null)
{
throw new Exception(String.Format("Can't find AVM component to open with id {0}.", cdata.Id));
}
var outmessage = CreateComponentEditMessage(cdata.InstanceId, avmcomp, CyphyMetaLinkUtils.FindCADModelObject(avmcomp));
if (outmessage != null)
{
//SendInterest(null, ResyncTopic, message.topic[1]);
bridgeClient.SendToMetaLinkBridge(outmessage);
}
else
{
GMEConsole.Warning.WriteLine("MetaLink: don't know about component " + cdata.Id);
}
// This is a recently created component
if (!syncedComponents.ContainsKey(avmcomp.Attributes.AVMID))
{
SyncedComponentData syncedCompData = new SyncedComponentData()
{
Type = SyncedComponentData.EditType.Component,
Id = avmcomp.Attributes.AVMID
};
syncedComponents.Add(avmcomp.Attributes.AVMID, syncedCompData);
HighlightInTree(avmcomp, 1);
}
}
finally
{
addon.Project.AbortTransaction();
}
}
else
{
string designId = cdata.Id;
string xml;
if (designIdToCadAssemblyXml.TryGetValue(designId, out xml))
{
addon.Project.BeginTransactionInNewTerr();
try
{
SendCadAssemblyXml(message.topic[0], xml, designId, false);
SaveCadAssemblyXml(xml, designId);
}
finally
{
addon.Project.AbortTransaction();
}
}
else
{
GMEConsole.Warning.WriteLine("MetaLink: unknown assembly " + designId);
}
}
}
else
// Request component list message from Creo
if (message.mode.SequenceEqual(new Edit.EditMode[] { Edit.EditMode.POST }) &&
message.actions.Count >= 1 && message.actions[0].actionMode == MetaLinkProtobuf.Action.ActionMode.REQUEST_COMPONENT_LIST)
{
addon.Project.BeginTransactionInNewTerr();
try
{
SendComponentList(message.topic[0]);
}
finally
{
addon.Project.AbortTransaction();
}
}
else
// Update AVM Component with the information from Creo
if (message.mode.SequenceEqual(new Edit.EditMode[] { Edit.EditMode.POST }) &&
message.actions.Count == 1 && message.actions[0].actionMode == MetaLinkProtobuf.Action.ActionMode.UPDATE_CYPHY_COMPONENT &&
message.actions[0].alien != null && message.actions[0].alien.encodingMode == Alien.EncodingMode.XML)
{
string componentId = message.actions[0].subjectID;
string component_xml = Encoding.UTF8.GetString(message.actions[0].alien.encoded);
ProcessAVMComponentUpdate(componentId, component_xml);
}
else
// Create a connector in component
if (message.mode.SequenceEqual(new Edit.EditMode[] { Edit.EditMode.POST }) &&
message.actions.Count >= 1 && message.actions[0].actionMode == MetaLinkProtobuf.Action.ActionMode.ADD_CONNECTOR_TO_COMPONENT)
{
string componentId = message.actions[0].subjectID;
ProcessInsertComponentConnector(componentId, message.actions[0]);
}
else
// Create new CyPhy component
if (message.mode.SequenceEqual(new Edit.EditMode[] { Edit.EditMode.POST }) &&
message.actions.Count == 1 && message.actions[0].actionMode == MetaLinkProtobuf.Action.ActionMode.CREATE_CYPHY_COMPONENT &&
message.actions[0].alien != null && message.actions[0].alien.encodingMode == Alien.EncodingMode.XML)
{
string component_xml = Encoding.UTF8.GetString(message.actions[0].alien.encoded);
ProcessAVMComponentCreate(component_xml, message.topic[0]);
}
else
// Connect component within a design
if (message.mode.SequenceEqual(new Edit.EditMode[] { Edit.EditMode.POST }) &&
message.actions.Count >= 1 && message.actions[0].actionMode == MetaLinkProtobuf.Action.ActionMode.CONNECT_COMPONENTS_CYPHY)
{
try
{
string assemblyID = message.actions[0].payload.components[0].ComponentID;
string conn1 = message.actions[0].payload.components[1].ComponentID.Substring(0, message.actions[0].payload.components[1].ComponentID.IndexOf('_'));
string ref1 = message.actions[0].payload.components[1].ComponentID.Substring(message.actions[0].payload.components[1].ComponentID.IndexOf('_') + 1);
string conn2 = message.actions[0].payload.components[2].ComponentID.Substring(0, message.actions[0].payload.components[2].ComponentID.IndexOf('_'));
string ref2 = message.actions[0].payload.components[2].ComponentID.Substring(message.actions[0].payload.components[2].ComponentID.IndexOf('_') + 1);
ProcessConnect(assemblyID, conn1, ref1, conn2, ref2);
}
catch (Exception ex)
{
GMEConsole.Warning.WriteLine("Error during processing connect message: " + ex.Message);
}
}
else
{
GMEConsole.Warning.WriteLine("Message left unprocessed: " + message.ToString());
}
}
private void StartAssemblyExe(CreoOpenMode mode, string guid, bool isComponentAssembly, string exeparams, string workingDir = null)
{
SyncedComponentData syncedCompData = null;
if (!syncedComponents.TryGetValue(guid, out syncedCompData))
{
GMEConsole.Warning.WriteLine("StartAssemblyExe(): Can't find guid " + guid);
return;
}
string createAssemblyExe = Path.Combine(META.VersionInfo.MetaPath, "bin", "CAD", "Creo", "bin", "CADCreoParametricMetaLink.exe");
if (File.Exists(createAssemblyExe) == false)
{
GMEConsole.Error.WriteLine(String.Format("Could not find CADCreoParametricMetaLink.exe at '{0}'", createAssemblyExe));
return;
}
if (workingDir == null)
{
workingDir = syncedCompData.WorkingDir;
}
try
{
File.Copy(Path.Combine(GetProjectDir(), "constraintdata.xml"), Path.Combine(workingDir, "constraintdata.xml"));
}
catch (Exception)
{
// not an issue
}
string logfile = Path.Combine(GetProjectDir(), "log", Path.ChangeExtension("MetaLink_CreoCreateAssembly_" + Path.GetRandomFileName(), "log"));
string arguments = String.Format("-v debug -g -s 127.0.0.1:{4} -w \"{0}\" -l \"{1}\" {2}, -id {3}", workingDir, logfile, exeparams, syncedCompData.InstanceId, SocketQueue.port);
arguments += " -d " + guid;
ProcessStartInfo info = new ProcessStartInfo()
{
RedirectStandardOutput = true,
RedirectStandardError = true,
RedirectStandardInput = true,
UseShellExecute = false,
WindowStyle = ProcessWindowStyle.Hidden,
CreateNoWindow = true,
FileName = createAssemblyExe,
Arguments = arguments
// TODO -p ?
};
if (mode == CreoOpenMode.OPEN_EMPTY)
{
info.Arguments += " -m passive";
}
else if (!isComponentAssembly)
{
info.Arguments += " -m component";
}
if (Configuration.ConfigProFile.Length > 0)
{
info.Arguments += " -c " + Configuration.ConfigProFile;
}
if (!string.IsNullOrWhiteSpace(syncedCompData.AuxDir))
{
info.Arguments += String.Format(" -a \"{0}\"", syncedCompData.AuxDir);
}
Process createAssembly = new Process();
createAssembly.StartInfo = info;
StringBuilder stdoutData = new StringBuilder();
StringBuilder stderrData = new StringBuilder();
createAssembly.OutputDataReceived += (o, args) =>
{
lock (stdoutData)
{
stdoutData.Append(args.Data);
stdoutData.Append(System.Environment.NewLine);
}
};
createAssembly.ErrorDataReceived += (o, args) =>
{
lock (stderrData)
{
stderrData.Append(args.Data);
stderrData.Append(System.Environment.NewLine);
}
};
createAssembly.EnableRaisingEvents = true;
createAssembly.Exited += (o, args) =>
{
lock (stderrData)
{
if (GMEConsole != null && createAssembly.ExitCode != 0)
{
string message = String.Format("CADCreoParametricMetaLink exited with code {0}", createAssembly.ExitCode);
// CADCreoParametricMetaLink attempts to log everything in its log file
// Ignore stderr if it doesn't contain anything useful
string stdErrString = stderrData.ToString();
if (Regex.Match(stdErrString, "\\S").Success)
{
string errlog = "CADCreoParametricCreateAssembly_err.log";
using (StreamWriter writer = new StreamWriter(errlog))
{
writer.Write(stdErrString);
writer.Close();
}
message += String.Format(", the logfile is {0} ", errlog);
}
GMEConsole.Error.WriteLine(message);
SyncControl.Invoke((System.Action)(() => StartupFailureCallback(stdErrString, logfile)));
}
}
};
LastStartedInstance = syncedCompData;
createAssembly.Start();
if (TestMode_CreoJobObject != IntPtr.Zero)
{
JobObjectPinvoke.AssignProcessToJobObject(createAssembly, TestMode_CreoJobObject);
}
createAssembly.BeginOutputReadLine();
createAssembly.BeginErrorReadLine();
createAssembly.StandardInput.Close();
GMEConsole.Info.WriteLine("Creo is starting, the logfile is " + SmartLogger.GetGMEConsoleFileLink(logfile));
ShowStartupDialog(true);
// createAssembly.WaitForExit(10 * 1000);
}
public void StartEditingComponent(CyPhyML.Component component, MgaFCO cadModel, bool createNewComponent)
{
addon.Project.BeginTransactionInNewTerr();
string avmid = component.Attributes.AVMID;
SyncedComponentData syncedCompData;
try
{
if (syncedComponents.TryGetValue(avmid, out syncedCompData))
{
GMEConsole.Error.WriteLine("This component is already open in Creo, AVMID: " + component.Attributes.AVMID);
return;
}
else
{
}
List<string> errorList = new List<string>();
VerifyCADResources(component, errorList);
if (errorList.Count != 0)
{
foreach (var err in errorList)
{
GMEConsole.Error.WriteLine(err);
}
System.Windows.Forms.MessageBox.Show("Errors found in component. Can't open in Meta-Link. Please check the log.");
return;
}
CyPhyML.Component newComponent = CyphyMetaLinkUtils.CopyComponent(component, createNewComponent);
avmid = newComponent.Attributes.AVMID;
if (createNewComponent && GMEConsole.gme != null)
{
// META-2109: open copy in model editor, select in Browser
try
{
string newComponentID = newComponent.ID;
bool closeModelEditor = false;
if (GMEConsole.gme.OleIt != null)
{
closeModelEditor = GMEConsole.gme.OleIt.MgaModel.ID == component.ID;
}
SyncControl.BeginInvoke((System.Action)delegate
{
try
{
if (closeModelEditor)
{
GMEConsole.gme.OleIt.Close();
}
GMEConsole.gme.ShowFCO((MgaFCO)newComponent.Impl, false);
object browser = GetBrowser();
if (browser != null)
{
browser.GetType().InvokeMember("FocusItem", System.Reflection.BindingFlags.InvokeMethod, null, browser, new object[] { newComponentID });
}
}
catch (Exception) { }
});
}
catch (Exception) { }
}
HighlightInTree(newComponent, 1);
}
finally
{
addon.Project.CommitTransaction();
}
syncedCompData = new SyncedComponentData()
{
Type = SyncedComponentData.EditType.Component,
InstanceId = (IdCounter++).ToString(),
Id = avmid
};
syncedComponents.Add(avmid, syncedCompData);
SendInterest(StartComponentEditAction, syncedCompData.InstanceId);
}
public void StartCreoEmpyMode()
{
string tmpid = Guid.NewGuid().ToString();
SyncedComponentData cdata = new SyncedComponentData()
{
Type = SyncedComponentData.EditType.Empty,
WorkingDir = GetProjectDir(),
InstanceId = (IdCounter++).ToString(),
Id = tmpid
};
syncedComponents.Add(tmpid, cdata);
StartAssemblyExe(CreoOpenMode.OPEN_EMPTY, tmpid, false, "");
SendInterest(null, cdata.InstanceId);
}
// Callback invoked if the executable startup has failed
private void ExeStartupFailed()
{
// Unhighlight tree and remove item from synced components
if (LastStartedInstance != null)
{
try
{
addon.Project.BeginTransactionInNewTerr();
ISIS.GME.Common.Interfaces.Base model = CyphyMetaLinkUtils.GetComponentAssemblyByGuid(addon.Project, LastStartedInstance.Id);
if (model == null)
{
model = CyphyMetaLinkUtils.GetComponentByAvmId(addon.Project, LastStartedInstance.Id);
SendDisinterest(true, LastStartedInstance.InstanceId);
}
if (model != null)
{
AssemblyID = null;
HighlightInTree(model, 0);
SendDisinterest(true, LastStartedInstance.InstanceId);
}
syncedComponents.Remove(LastStartedInstance.Id);
}
finally
{
addon.Project.AbortTransaction();
}
}
LastStartedInstance = null;
ShowStartupDialog(false);
}
private void StartAssemblyExe(CreoOpenMode mode, string guid, bool isComponentAssembly, string exeparams, string workingDir = null)
{
SyncedComponentData syncedCompData = null;
if (!syncedComponents.TryGetValue(guid, out syncedCompData))
{
GMEConsole.Warning.WriteLine("StartAssemblyExe(): Can't find guid " + guid);
return;
}
string proeIsisExtensionsDir = System.Environment.GetEnvironmentVariable("PROE_ISIS_EXTENSIONS");
string createAssemblyExe = Path.Combine(proeIsisExtensionsDir ?? "", "bin", "CADCreoParametricMetaLink.exe");
if (File.Exists(createAssemblyExe) == false)
{
GMEConsole.Error.WriteLine("CADCreoParametricMetaLink.exe could not be found");
return;
}
if (workingDir == null)
{
workingDir = syncedCompData.WorkingDir;
}
try
{
File.Copy(Path.Combine(GetProjectDir(), "constraintdata.xml"), Path.Combine(workingDir, "constraintdata.xml"));
}
catch (Exception)
{
// not an issue
}
string logfile = Path.Combine(GetProjectDir(), "log", Path.ChangeExtension("MetaLink_CreoCreateAssembly_" + Path.GetRandomFileName(), "log"));
string arguments = String.Format("-v debug -g -s 127.0.0.1:15150 -w \"{0}\" -l \"{1}\" {2}, -id {3}", workingDir, logfile, exeparams, syncedCompData.InstanceId);
arguments += " -d " + guid;
ProcessStartInfo info = new ProcessStartInfo()
{
RedirectStandardOutput = true,
RedirectStandardError = true,
RedirectStandardInput = true,
UseShellExecute = false,
WindowStyle = ProcessWindowStyle.Hidden,
CreateNoWindow = true,
FileName = createAssemblyExe,
Arguments = arguments
// TODO -p ?
};
if (mode == CreoOpenMode.OPEN_EMPTY)
{
info.Arguments += " -m passive";
}
else if (!isComponentAssembly)
{
info.Arguments += " -m component";
}
if (Configuration.ConfigProFile.Length > 0)
{
info.Arguments += " -c " + Configuration.ConfigProFile;
}
if (!string.IsNullOrWhiteSpace(syncedCompData.AuxDir))
{
info.Arguments += String.Format(" -a \"{0}\"", syncedCompData.AuxDir);
}
Process createAssembly = new Process();
createAssembly.StartInfo = info;
StringBuilder stdoutData = new StringBuilder();
StringBuilder stderrData = new StringBuilder();
createAssembly.OutputDataReceived += (o, args) =>
{
lock (stdoutData)
{
stdoutData.Append(args.Data);
stdoutData.Append(System.Environment.NewLine);
}
};
createAssembly.ErrorDataReceived += (o, args) =>
{
lock (stderrData)
{
stderrData.Append(args.Data);
stderrData.Append(System.Environment.NewLine);
}
};
createAssembly.EnableRaisingEvents = true;
createAssembly.Exited += (o, args) =>
{
lock (stderrData)
{
if (GMEConsole != null && createAssembly.ExitCode != 0)
{
string errlog = "CADCreoParametricCreateAssembly_err.log";
StreamWriter writer = new StreamWriter(errlog);
writer.Write(stderrData.ToString());
writer.Flush();
writer.Close();
GMEConsole.Error.WriteLine(String.Format("CADCreoParametricCreateAssembly exited with code {0}, the logfile is {1}", createAssembly.ExitCode, errlog));
SyncControl.Invoke(startupFailedCallback);
}
}
};
LastStartedInstance = syncedCompData;
createAssembly.Start();
createAssembly.BeginOutputReadLine();
createAssembly.BeginErrorReadLine();
createAssembly.StandardInput.Close();
GMEConsole.Info.WriteLine("Creo is starting, the logfile is at: <a href=\"file:///{0}\" target=\"_blank\">{0}</a>", Path.Combine(workingDir, "log", logfile));
ShowStartupDialog(true);
// createAssembly.WaitForExit(10 * 1000);
}
public void StartCreoEmpyMode()
{
SyncedComponentData cdata = new SyncedComponentData()
{
Type = SyncedComponentData.EditType.Component,
WorkingDir = GetProjectDir()
};
string tmpid = Guid.NewGuid().ToString();
syncedComponents.Add(tmpid, cdata);
StartAssemblyExe(CreoOpenMode.OPEN_EMPTY, tmpid, false, "");
SendInterest(null, ComponentCreateTopic, tmpid);
}
