/// <summary>
/// Добавление окна.
/// </summary>
/// <param name="hostWall"></param>
public void AddWindow(Wall hostWall)
{
// hard coding the window type we will use.
// e.g., "M_Fixed: 0915 x 1830mm
const string windowFamilyName = "Фиксированные"; // "M_Fixed"
const string windowTypeName = "0915 x 1830 мм"; // "0915 x 1830mm"
const string windowFamilyAndTypeName = windowFamilyName + ": " + windowTypeName;
double sillHeight = ElementModification.mmToFeet(915);
// get the door type to use.
FamilySymbol windowType =
(FamilySymbol)ElementFiltering.FindFamilyType(
m_rvtDoc,
typeof(FamilySymbol),
windowFamilyName,
windowTypeName,
BuiltInCategory.OST_Windows);
if (windowType == null)
{
TaskDialog.Show("Revit Intro Lab", "Cannot find (" +
windowFamilyAndTypeName +
"). Try with DefaultMetric.rte.");
}
// get the start and end points of the wall.
LocationCurve locCurve = (LocationCurve)hostWall.Location;
XYZ pt1 = locCurve.Curve.GetEndPoint(0);
XYZ pt2 = locCurve.Curve.GetEndPoint(1);
// calculate the mid point.
XYZ pt = (pt1 + pt2) / 2.0;
// we want to set the reference as a bottom of the wall or level1.
ElementId idLevel1 = hostWall.get_Parameter(BuiltInParameter.WALL_BASE_CONSTRAINT).AsElementId();
Level level1 = (Level)m_rvtDoc.GetElement(idLevel1);
// finally create a window.
FamilyInstance aWindow = m_rvtDoc.Create.NewFamilyInstance(pt, windowType, hostWall, level1, StructuralType.NonStructural);
// set the sill height
aWindow.get_Parameter(BuiltInParameter.INSTANCE_SILL_HEIGHT_PARAM).Set(sillHeight);
}
/// <summary>
/// СОздать вдери
/// </summary>
/// <param name="hostWall"></param>
public void AddDoor(Wall hostWall)
{
// hard coding the door type we will use.
// e.g., "M_Single-Flush: 0915 x 2134mm
const string doorFamilyName = "Одиночные-Щитовые"; // "M_Single-Flush"
const string doorTypeName = "0915 x 2134 мм"; // "0915 x 2134mm"
const string doorFamilyAndTypeName = doorFamilyName + ": " + doorTypeName;
// get the door type to use.
FamilySymbol doorType = (FamilySymbol)ElementFiltering.FindFamilyType(
m_rvtDoc,
typeof(FamilySymbol),
doorFamilyName,
doorTypeName,
BuiltInCategory.OST_Doors);
if (doorType == null)
{
TaskDialog.Show($"Revit Intro Lab", "Cannot find (" + doorFamilyAndTypeName + "). " +
"Maybe you use a different template? Try with DefaultMetric.rte.");
}
// get the start and end points of the wall.
LocationCurve locCurve = (LocationCurve)hostWall.Location;
XYZ pt1 = locCurve.Curve.GetEndPoint(0);
XYZ pt2 = locCurve.Curve.GetEndPoint(1);
// calculate the mid point.
XYZ pt = (pt1 + pt2) / 2.0;
// we want to set the reference as a bottom of the wall or level1.
ElementId idLevel1 = hostWall.get_Parameter(BuiltInParameter.WALL_BASE_CONSTRAINT).AsElementId();
Level level1 = (Level)m_rvtDoc.GetElement(idLevel1);
// finally, create a door.
FamilyInstance aDoor = m_rvtDoc.Create.NewFamilyInstance(pt, doorType, hostWall, level1, StructuralType.NonStructural);
}
private void ModifyElement(Document doc, Element element)
{
using (Transaction transaction = new Transaction(doc, nameof(this.ModifyElement)))
{
transaction.Start();
Element newWallType = ElementFiltering.FindFamilyType(
m_rvtDoc,
typeof(WallType),
"Базовая стена",
"CW 102-50-100p",
null);
Wall aWall = (Wall)element;
aWall.WallType = (WallType)newWallType;
aWall.get_Parameter(BuiltInParameter.WALL_TOP_OFFSET).Set(mmToFeet(1000));
/*------------------------------------------------------------------------------*/
LocationCurve wallLocation = (LocationCurve)aWall.Location;
// create a new line bound.
XYZ pt1 = wallLocation.Curve.GetEndPoint(0);
XYZ pt2 = wallLocation.Curve.GetEndPoint(1);
double dt = mmToFeet(2000.0);
XYZ newPt1 = new XYZ(pt1.X - dt, pt1.Y - dt, pt1.Z);
XYZ newPt2 = new XYZ(pt2.X - dt, pt2.Y - dt, pt2.Z);
Line newWallLine = Line.CreateBound(newPt1, newPt2);
// finally change the curve.
wallLocation.Curve = newWallLine;
transaction.Commit();
}
}
/// <summary>
/// Создать четыре стены.
/// </summary>
/// <returns></returns>
public List <Wall> CreateWalls()
{
// hard coding the size of the house for simplicity
double width = ElementModification.mmToFeet(10000.0);
double depth = ElementModification.mmToFeet(5000.0);
// get the levels we want to work on.
// Note: hard coding for simplicity. Modify here you use
// a different template.
Level level1 = (Level)ElementFiltering.FindElement(m_rvtDoc, typeof(Level), "Level 1", null);
if (level1 == null)
{
TaskDialog.Show("Revit Intro Lab", "Cannot find (Level 1). Maybe you use a different template? Try with DefaultMetric.rte.");
return(null);
}
Level level2 = (Level)ElementFiltering.FindElement(m_rvtDoc, typeof(Level), "Level 2", null);
if (level2 == null)
{
TaskDialog.Show("Revit Intro Lab", "Cannot find (Level 2). Maybe you use a different template? Try with DefaultMetric.rte.");
return(null);
}
// set four corner of walls.
// 5th point is for combenience to loop through.
double dx = width / 2.0;
double dy = depth / 2.0;
List <XYZ> pts = new List <XYZ>()
{
new XYZ(-dx, -dy, 0.0),
new XYZ(dx, -dy, 0.0),
new XYZ(dx, dy, 0.0),
new XYZ(-dx, dy, 0.0)
};
pts.Add(pts[0]);
// flag for structural wall or not.
bool isStructural = false;
// save walls we create.
List <Wall> walls = new List <Wall>(4);
// loop through list of points and define four walls.
for (int i = 0; i <= 3; i++)
{
// define a base curve from two points.
Line baseCurve = Line.CreateBound(pts[i], pts[i + 1]);
// create a wall using the one of overloaded methods.
Wall aWall = Wall.Create(m_rvtDoc, baseCurve, level1.Id, isStructural);
// set the Top Constraint to Level 2
aWall.get_Parameter(BuiltInParameter.WALL_HEIGHT_TYPE).Set(level2.Id);
// save the wall.
walls.Add(aWall);
}
// This is important. we need these lines to have shrinkwrap working.
m_rvtDoc.Regenerate();
m_rvtDoc.AutoJoinElements();
return(walls);
}