/// <summary>
/// 申领模具
/// </summary>
/// <param name="moldUseType">模具使用类型</param>
/// <param name="moldNR">模具号</param>
/// <param name="applicantNR">申请员工工号</param>
/// <param name="operatorNR">操作员工工号</param>
/// <param name="workstationNR">操作台号</param>
/// <returns>申请信息</returns>
public Message ApplyMold(MoldUseType moldUseType, string moldNR, string applicantNR, string operatorNR, string workstationNR)
{
try
{
using (IUnitOfWork unitwork = MSSqlHelper.DataContext())
{
IWorkstationRepository workstationRep = new WorkstationRepository(unitwork);
IMoldRepository moldRep = new MoldRepository(unitwork);
Mold mold = moldRep.GetById(moldNR);
// check mold is available for apply
if (mold.State == MoldStateType.NotReturned)
return new Message() { MsgType = MsgType.Warn, Content = "模具处于不可借状态！" };
// check workstaition reach the max mold apply number
if (workstationRep.OverAppliedMold(workstationNR) == false && Settings.Default.AllowOverApply == false)
return new Message() { MsgType = MsgType.Warn, Content = "申领已到达上限！" };
IPositionRepository positionRep = new PositionRepository(unitwork);
Position position = positionRep.GetByFacilictyNR(moldNR);
//set value of storage record
IStorageRecordRepository recordRep = new StorageRecordRepository(unitwork);
StorageRecord storageRecord = new StorageRecord();
storageRecord.StorageRecordNR = GuidUtil.GenerateGUID();
storageRecord.PositionId = position.PositionID;
storageRecord.Source = position.PositionNR;
storageRecord.Destination = workstationNR;
storageRecord.OperatorId = operatorNR;
storageRecord.ApplicantId = applicantNR;
storageRecord.Quantity = 1;
storageRecord.Date = DateTime.Now;
storageRecord.TargetNR = moldNR;
storageRecord.RecordType = (StorageRecordType)moldUseType;
// add new storage record
recordRep.Add(storageRecord);
// update mold last apply storage record nr
IMoldLastRecordRepository lastRecordRep = new MoldLastRecordRepository(unitwork);
MoldLastRecord lastRecord = lastRecordRep.GetByMoldNR(moldNR);
lastRecord.StorageRecordNR = storageRecord.StorageRecordNR;
// update mold state
mold = moldRep.GetById(storageRecord.TargetNR);
mold.State = MoldStateType.NotReturned;
// update the workstation current mold count
Workstation workstation = workstationRep.GetById(storageRecord.Destination);
workstation.CurrentMoldCount++;
unitwork.Submit();
return new Message() { MsgType = MsgType.OK, Content = "申领成功" };
}
}
catch (Exception ex)
{
LogUtil.log.Error(ex.ToString());
return new Message() { MsgType = MsgType.Error, Content = "请核实所填数据的准确性" };
}
}
/// <summary>
/// set mold cut
/// </summary>
/// <param name="moldNr"></param>
/// <param name="currentCut"></param>
/// <param name="totalCut"></param>
/// <returns></returns>
public string SetMoldCut(string moldNr, string currentCut, string totalCut)
{
Mold mold = null;
try
{
using (IUnitOfWork unitwork = MSSqlHelper.DataContext())
{
IMoldRepository moldRep = new MoldRepository(unitwork);
mold = moldRep.GetById(moldNr);
if (mold != null)
{
// update mold state
mold.CurrentCuttimes = int.Parse(currentCut);
mold.Cuttedtimes = int.Parse(totalCut);
}
unitwork.Submit();
}
}
catch (Exception ex)
{
LogUtil.log.Error(ex.ToString());
}
return moldNr;
}
/// <summary>
/// 根据模具警报类型获得模具警报信息
/// </summary>
/// <param name="type">模具警报类型</param>
/// <returns>模具警报信息列表</returns>
public List<MoldWarnInfo> GetMoldWarnInfo(MoldWarnType type)
{
using (IUnitOfWork unitwork = MSSqlHelper.DataContext())
{
IMoldRepository moldRepostitory = new MoldRepository(unitwork);
List<MoldView> molds = moldRepostitory.GetByWarnType(type);
List<MoldWarnInfo> moldWarnInfos = new List<MoldWarnInfo>();
foreach (MoldView m in molds)
{
MoldWarnInfo moldWarnInfo = new MoldWarnInfo()
{
MoldNR = m.MoldNR,
Type = m.TypeName,
ProjectName = m.ProjectName,
MaxLendHour = (double)m.MaxLendHour,
LendTime = (DateTime)m.LastRecordDate,
CurrentPosition = m.StorageRecordNR.HasValue ? moldRepostitory.GetMoldCurrPosiByRecordNR((Guid)m.StorageRecordNR) : string.Empty
};
moldWarnInfos.Add(moldWarnInfo);
}
return moldWarnInfos;
}
}
/// <summary>
/// 根据模具号获得库位号
/// </summary>
/// <param name="posiNr">库位号</param>
/// <returns>模具号</returns>
public string GetMoldNrByPosiNr(string posiNr)
{
using (IUnitOfWork unitwork = MSSqlHelper.DataContext())
{
IMoldRepository moldRep = new MoldRepository(unitwork);
return moldRep.GetMoldNrByPosiNr(posiNr);
}
}
/// <summary>
/// 根据模具号获得模具动态信息
/// </summary>
/// <param name="moldNR">模具号</param>
/// <returns>模具基本信息</returns>
public MoldDynamicInfo GetMoldDynamicInfoByMoldNR(string moldNR)
{
using (IUnitOfWork unitwork = MSSqlHelper.DataContext())
{
IMoldRepository moldRepostitory = new MoldRepository(unitwork);
MoldView moldview = moldRepostitory.GetMoldViewByMoldNR(moldNR);
if (moldview == null)
return null;
IStorageRecordRepository storageRep = new StorageRecordRepository(unitwork);
StorageRecord storageRecord = null;
if (moldview.StorageRecordNR != null)
{
storageRecord = storageRep.GetByStorageNR((Guid)moldview.StorageRecordNR);
}
MoldDynamicInfo moldDynamicInfo = new MoldDynamicInfo()
{
CurrentPosition = moldview.StorageRecordNR == null ? string.Empty : moldRepostitory.GetMoldCurrPosiByRecordNR((Guid)moldview.StorageRecordNR),
Operator = storageRecord == null ? string.Empty : storageRecord.OperatorId,
OperateTime = storageRecord == null ? string.Empty : storageRecord.Date.ToString(),
AllowedCuttedTime = moldview.MaxCuttimes,
CurrentCuttedTime = moldview.CurrentCuttimes,
ReleaseCycle = moldview.ReleaseCycle,
LastReleasedTime = moldview.LastReleasedDate.ToString(),
MantainCycle = moldview.MaintainCycle,
LastMantainTime = moldview.LastMainedDate.ToString(),
State = moldview.State,
StateCN = EnumUtil.GetEnumDescriptionByEnumValue(moldview.State),
ProjectId = moldview.ProjectID,
ProjectName = moldview.ProjectName
};
return moldDynamicInfo;
}
}
/// <summary>
/// 根据模具号获得库位号
/// </summary>
/// <param name="moldNR">模具号</param>
/// <returns>库位号</returns>
public string GetMoldCurrentPosition(string moldNR)
{
using (IUnitOfWork unitwork = MSSqlHelper.DataContext())
{
IMoldRepository moldRepostitory = new MoldRepository(unitwork);
MoldView moldview = moldRepostitory.GetMoldViewByMoldNR(moldNR);
return moldview.StorageRecordNR == null ? string.Empty : moldRepostitory.GetMoldCurrPosiByRecordNR((Guid)moldview.StorageRecordNR);
}
}
/// <summary>
/// 根据搜索条件获得模具基本信息
/// </summary>
/// <param name="conditions">搜索条件</param>
/// <returns>模具基本信息列表</returns>
public List<MoldBaseInfo> GetMoldByMutiConditions(MoldSearchCondition conditions)
{
using (IUnitOfWork unitwork = MSSqlHelper.DataContext())
{
IMoldRepository moldRepostitory = new MoldRepository(unitwork);
List<MoldView> molds = moldRepostitory.GetByMutiConditions(conditions);
List<MoldBaseInfo> moldBaseInfos = new List<MoldBaseInfo>();
foreach (MoldView m in molds)
{
MoldBaseInfo moldBaseInfo = new MoldBaseInfo()
{
MoldNR = m.MoldNR,
Name = m.Name,
Type = m.TypeName,
State = m.State,
StateCN = m.StateCN,
ProjectId = m.ProjectID,
ProjectName = m.ProjectName,
CurrentPosition = m.StorageRecordNR.HasValue ? moldRepostitory.GetMoldCurrPosiByRecordNR((Guid)m.StorageRecordNR) : string.Empty
};
moldBaseInfos.Add(moldBaseInfo);
}
return moldBaseInfos;
}
}
/// <summary>
/// 根据模具号获得模具基本信息
/// </summary>
/// <param name="moldNR">模具号</param>
/// <returns>模具基本信息</returns>
public MoldBaseInfo GetMoldBaseInfoByNR(string moldNR)
{
using (IUnitOfWork unitwork = MSSqlHelper.DataContext())
{
IMoldRepository moldRepostitory = new MoldRepository(unitwork);
IAttachmentRepository attachRep = new AttachmentRepository(unitwork);
IPositionRepository posiRep = new PositionRepository(unitwork);
MoldView m = moldRepostitory.GetMoldViewByMoldNR(moldNR);
if (m != null)
{
MoldBaseInfo mb = new MoldBaseInfo()
{
MoldNR = m.MoldNR,
Name = m.Name,
Type = m.TypeName,
Position = posiRep.GetByFacilictyNR(moldNR).PositionNR,
Producer = m.Producer,
Material = m.Material,
Weight = m.Weight == null ? string.Empty : m.Weight.ToString(),
State = m.State,
StateCN = m.StateCN,
ProjectId = m.ProjectID,
ProjectName = m.ProjectName,
Attach = attachRep.GetByMasterNR(moldNR)
};
return mb;
}
return null;
}
}
/// <summary>
/// 根据模具号判断模具是否存在
/// </summary>
/// <param name="moldNR">模具号</param>
/// <returns>判断结果</returns>
public bool MoldExist(string moldNR)
{
using (IUnitOfWork unitwork = MSSqlHelper.DataContext())
{
IMoldRepository moldRep = new MoldRepository(unitwork);
return moldRep.MoldExsit(moldNR);
}
}
/// <summary>
/// 将模具从缓冲区移到库位
/// </summary>
/// <param name="moldNR">模具号</param>
/// <param name="operatorNR">操作员工号</param>
/// <param name="remark">备注</param>
/// <returns>操作信息</returns>
public Message ReturnMoldInPosition(string moldNR, string operatorNR,string remark)
{
try
{
using (IUnitOfWork unitwork = MSSqlHelper.DataContext())
{
IMoldRepository moldRep = new MoldRepository(unitwork);
Mold mold = moldRep.GetById(moldNR);
if (mold.State == MoldStateType.NotReturned)
return new Message() { MsgType = MsgType.Warn, Content = "模具还未归还，请归还后再入库！" };
string currentPosi = moldRep.GetMoldCurrPosiByMoldNR(moldNR);
if(!currentPosi.Equals(GetPartPoolPosiNr()))
return new Message() { MsgType = MsgType.Warn, Content = "模具已经入库！" };
StorageRecord storageRecord = new StorageRecord();
//set value of storage record
IPositionRepository positionRep = new PositionRepository(unitwork);
Position position = positionRep.GetByFacilictyNR(moldNR);
storageRecord.PositionId = position.PositionID;
storageRecord.StorageRecordNR = GuidUtil.GenerateGUID();
storageRecord.Source = currentPosi;
storageRecord.Destination = position.PositionNR;
storageRecord.OperatorId =operatorNR==null?string.Empty: operatorNR.ToString();
storageRecord.Date = DateTime.Now;
storageRecord.Quantity = 1;
storageRecord.TargetNR = moldNR;
storageRecord.Remark = remark==null?string.Empty:remark.ToString();
storageRecord.RecordType = StorageRecordType.MoveStore;
// add new storage record
IStorageRecordRepository recordRep = new StorageRecordRepository(unitwork);
recordRep.Add(storageRecord);
// update mold last apply storage record nr
IMoldLastRecordRepository lastRecordRep = new MoldLastRecordRepository(unitwork);
MoldLastRecord lastRecord = lastRecordRep.GetByMoldNR(moldNR);
lastRecord.StorageRecordNR = storageRecord.StorageRecordNR;
unitwork.Submit();
return new Message() { MsgType = MsgType.OK, Content = "入库成功" };
}
}
catch (Exception ex)
{
LogUtil.log.Error(ex.ToString());
return new Message() { MsgType = MsgType.Error, Content = ex.Message };
}
}
/// <summary>
/// 归还模具
/// </summary>
/// <param name="moldNR">模具号</param>
/// <param name="applicantNR">申请员工工号</param>
/// <param name="operatorNR">操作员工工号</param>
/// <param name="remark">备注</param>
/// <param name="moldState">模具状态</param>
/// <returns>归还信息</returns>
public Message ReturnMold(string moldNR, string applicantNR, string operatorNR, string remark, MoldReturnStateType moldState)
{
try
{
using (IUnitOfWork unitwork = MSSqlHelper.DataContext())
{
IMoldRepository moldRep = new MoldRepository(unitwork);
Mold mold = moldRep.GetById(moldNR);
if (mold.State != MoldStateType.NotReturned)
return new Message() {MsgType= MsgType.Warn, Content = "模具已归还！" };
StorageRecord storageRecord = new StorageRecord();
//set value of storage record
IPositionRepository positionRep = new PositionRepository(unitwork);
//Position position = positionRep.GetByFacilictyNR(moldNR);
Position position = positionRep.GetPartPoolPosition(Settings.Default.MoldPoolPosiNr);
storageRecord.PositionId = position.PositionID;
storageRecord.StorageRecordNR = GuidUtil.GenerateGUID();
storageRecord.Source = moldRep.GetMoldCurrPosiByMoldNR(moldNR);
storageRecord.Destination = position.PositionNR;
storageRecord.OperatorId = operatorNR;
storageRecord.ApplicantId = applicantNR;
storageRecord.Date = DateTime.Now;
storageRecord.Quantity = 1;
storageRecord.TargetNR = moldNR;
storageRecord.Remark = remark;
storageRecord.RecordType = StorageRecordType.Return;
// add new storage record
IStorageRecordRepository recordRep = new StorageRecordRepository(unitwork);
recordRep.Add(storageRecord);
// update mold last apply storage record nr
IMoldLastRecordRepository lastRecordRep = new MoldLastRecordRepository(unitwork);
MoldLastRecord lastRecord = lastRecordRep.GetByMoldNR(moldNR);
lastRecord.StorageRecordNR = storageRecord.StorageRecordNR;
// update mold state
mold = moldRep.GetById(storageRecord.TargetNR);
mold.State =(MoldStateType)moldState;
// update workstation mold count
IWorkstationRepository workstationRep = new WorkstationRepository(unitwork);
Workstation workstation = workstationRep.GetById(storageRecord.Source);
if(workstation!=null)
workstation.CurrentMoldCount--;
unitwork.Submit();
return new Message() { MsgType = MsgType.OK, Content = "归还成功" };
}
}
catch (Exception ex)
{
LogUtil.log.Error(ex.ToString());
return new Message() { MsgType = MsgType.Error, Content = ex.Message };
}
}
/// <summary>
/// 模具测试
/// </summary>
/// <param name="moldNR">模具号</param>
/// <param name="operatorNR">操作员工号</param>
/// <param name="files">文件列表</param>
/// <returns>测试信息</returns>
public Message MoldTest(string moldNR, string operatorNR, FileUP[] files,int currentCutTimes,bool moldNormal)
{
try
{
using (TransactionScope ts = new TransactionScope())
{
using (IUnitOfWork unitwork = MSSqlHelper.DataContext())
{
IReportRepository reportRep = new ReportRepository(unitwork);
Report report = new Report();
report.ReportId = GuidUtil.GenerateGUID();
report.MoldID = moldNR;
report.ReportType = ReportType.TestReport;
report.OperatorID = operatorNR;
report.Date = DateTime.Now;
//upload files
FileUpLoad(files, report.ReportId.ToString());
reportRep.Add(report);
// update the last released date
IMoldRepository moldRep = new MoldRepository(unitwork);
Mold mold = moldRep.GetById(moldNR);
mold.LastReleasedDate = report.Date;
mold.Cuttedtimes += mold.CurrentCuttimes;
mold.CurrentCuttimes = 0;
if (moldNormal)
mold.State = MoldStateType.Normal;
unitwork.Submit();
ts.Complete();
return new Message() { MsgType = MsgType.OK, Content = "实验报告上传成功！" };
}
}
}
catch (Exception ex)
{
LogUtil.log.Error(ex.ToString());
return new Message() { MsgType = MsgType.Error, Content = ex.Message };
}
}
/// <summary>
/// 模具移动工作台
/// </summary>
/// <param name="moldNR">模具号</param>
/// <param name="operatorNR">操作员工号</param>
/// <param name="targetWStationNR">目标工作台号</param>
/// <returns>移动信息</returns>
public Message MoldMoveWorkStation(string moldNR, string operatorNR, string targetWStationNR)
{
try
{
using (IUnitOfWork unitwork = MSSqlHelper.DataContext())
{
IWorkstationRepository workstationRep = new WorkstationRepository(unitwork);
IMoldRepository moldRep = new MoldRepository(unitwork);
IEmployeeRepository empRep = new EmployeeRepository(unitwork);
Mold mold = moldRep.GetById(moldNR);
if (!empRep.Exist(operatorNR))
return new Message() { MsgType = MsgType.Warn, Content = "操作员不存在！" };
if(mold==null)
return new Message() { MsgType = MsgType.Warn, Content = "模具不存在！" };
Workstation tworkstation=workstationRep.GetById(targetWStationNR);
if (tworkstation == null)
return new Message() { MsgType = MsgType.Warn, Content = "目标工作台不存在！" };
// check mold is available for move
if (mold.State != MoldStateType.NotReturned)
return new Message() { MsgType = MsgType.Warn, Content = "模具未被借用，请先借用！" };
MoldView moldview = moldRep.GetMoldViewByMoldNR(moldNR);
string currentWorkPosi = moldview.StorageRecordNR == null ? string.Empty : moldRep.GetMoldCurrPosiByRecordNR((Guid)moldview.StorageRecordNR);
// if(workstationRep.GetById(currentWorkPosi)==null)
// return new Message() { MsgType = MsgType.Warn, Content = "模具正在使用的工作台号已经被修改，请先归还此模具再做后续操作！" };
if (currentWorkPosi.Equals(targetWStationNR))
return new Message() { MsgType = MsgType.Warn, Content = "模具已经在此工作台，不可重复移动！" };
// check workstaition reach the max mold apply number
if (workstationRep.OverAppliedMold(targetWStationNR) == false && Settings.Default.AllowOverApply == false)
return new Message() { MsgType = MsgType.Warn, Content = "目标工作台已经到达模具使用上限！" };
IPositionRepository positionRep = new PositionRepository(unitwork);
Position position = positionRep.GetByFacilictyNR(moldNR);
//set value of storage record
IStorageRecordRepository recordRep = new StorageRecordRepository(unitwork);
StorageRecord storageRecord = new StorageRecord();
storageRecord.StorageRecordNR = GuidUtil.GenerateGUID();
storageRecord.PositionId = position.PositionID;
storageRecord.Source = currentWorkPosi;
storageRecord.Destination = targetWStationNR;
storageRecord.OperatorId = operatorNR;
storageRecord.Quantity = 1;
storageRecord.Date = DateTime.Now;
storageRecord.TargetNR = moldNR;
storageRecord.RecordType = StorageRecordType.MoveWStation;
// add new storage record
recordRep.Add(storageRecord);
// update mold last apply storage record nr
IMoldLastRecordRepository lastRecordRep = new MoldLastRecordRepository(unitwork);
MoldLastRecord lastRecord = lastRecordRep.GetByMoldNR(moldNR);
lastRecord.StorageRecordNR = storageRecord.StorageRecordNR;
// update the workstation current mold count
//Workstation tworkstation = workstationRep.GetById(storageRecord.Destination);
//if(tworkstation!=null)
tworkstation.CurrentMoldCount++;
Workstation sworkstation = workstationRep.GetById(storageRecord.Source);
if(sworkstation!=null)
sworkstation.CurrentMoldCount--;
unitwork.Submit();
return new Message() { MsgType = MsgType.OK, Content = "移动工作台成功！" };
}
}
catch (Exception ex)
{
LogUtil.log.Error(ex.ToString());
return new Message() { MsgType = MsgType.Error, Content = "请核实所填数据的准确性" };
}
}
/// <summary>
/// 模具移库
/// </summary>
/// <param name="moldNR">模具号</param>
/// <param name="sourcePosiNr">源位置号</param>
/// <param name="desiPosiNr">目标位置号</param>
/// <returns>移库信息</returns>
public Message MoldMoveStore(string moldNR,string warehouseNR,string sourcePosiNr,string desiPosiNr)
{
try
{
using (IUnitOfWork unitwork = MSSqlHelper.DataContext())
{
IPositionRepository posiRep = new PositionRepository(unitwork);
if (!posiRep.PositionExsit(desiPosiNr))
return new Message() { MsgType = MsgType.Warn, Content = "目标库位不存在，请核实！" };
IMoldRepository moldRep = new MoldRepository(unitwork);
if (moldRep.GetMoldNrByPosiNr(desiPosiNr).Length == 0)
{
// there is no mold in desitination position
// add new uniqstorage
Position position = posiRep.GetByWarehouseNRAndPositionNR(warehouseNR, desiPosiNr);
// add new uniqstorage
IUniqStorageRepository uniqStroageRep = new UniqStorageRepository(unitwork);
uniqStroageRep.DeleteByMoldNr(moldNR);
UniqStorage uniqStorage = new UniqStorage()
{
UniqStorageId = GuidUtil.GenerateGUID(),
UniqNR = moldNR,
PositionId = position.PositionID,
Quantity = 1
};
uniqStroageRep.Add(uniqStorage);
//set value of storage record
StorageRecord storageRecord = new StorageRecord();
storageRecord.PositionId = position.PositionID;
storageRecord.StorageRecordNR = GuidUtil.GenerateGUID();
storageRecord.Source = sourcePosiNr;
storageRecord.Destination = desiPosiNr;
storageRecord.Date = DateTime.Now;
storageRecord.Quantity = 1;
storageRecord.TargetNR = moldNR;
storageRecord.RecordType = StorageRecordType.MoveStore;
// add new storage record
IStorageRecordRepository recordRep = new StorageRecordRepository(unitwork);
recordRep.Add(storageRecord);
IMoldLastRecordRepository moldLastRecord = new MoldLastRecordRepository(unitwork);
moldLastRecord.GetByMoldNR(moldNR).StorageRecordNR = storageRecord.StorageRecordNR;
}
else
{
Position sourcePosi = posiRep.GetByWarehouseNRAndPositionNR(warehouseNR, sourcePosiNr);
Position desiPosi = posiRep.GetByWarehouseNRAndPositionNR(warehouseNR, desiPosiNr);
UniqStorage sourceU = sourcePosi.UniqStorage.First();
UniqStorage desiU = desiPosi.UniqStorage.First();
string desiMoldNr = desiU.UniqNR;
sourceU.UniqNR = desiMoldNr;
desiU.UniqNR = moldNR;
// add new storage record
IStorageRecordRepository recordRep = new StorageRecordRepository(unitwork);
StorageRecord sourcestorageRecord = new StorageRecord();
sourcestorageRecord.PositionId = sourcePosi.PositionID;
sourcestorageRecord.StorageRecordNR = GuidUtil.GenerateGUID();
sourcestorageRecord.Source = sourcePosiNr;
sourcestorageRecord.Destination = desiPosiNr;
sourcestorageRecord.Date = DateTime.Now;
sourcestorageRecord.Quantity = 1;
sourcestorageRecord.TargetNR = moldNR;
sourcestorageRecord.RecordType = StorageRecordType.MoveStore;
recordRep.Add(sourcestorageRecord);
StorageRecord desistorageRecord = new StorageRecord();
desistorageRecord.PositionId = desiPosi.PositionID;
desistorageRecord.StorageRecordNR = GuidUtil.GenerateGUID();
desistorageRecord.Source = desiPosiNr;
desistorageRecord.Destination = sourcePosiNr;
desistorageRecord.Date = DateTime.Now;
desistorageRecord.Quantity = 1;
desistorageRecord.TargetNR = desiMoldNr;
desistorageRecord.RecordType = StorageRecordType.MoveStore;
recordRep.Add(desistorageRecord);
IMoldLastRecordRepository moldLastRecord = new MoldLastRecordRepository(unitwork);
moldLastRecord.GetByMoldNR(moldNR).StorageRecordNR = sourcestorageRecord.StorageRecordNR;
moldLastRecord.GetByMoldNR(desiMoldNr).StorageRecordNR = desistorageRecord.StorageRecordNR;
}
unitwork.Submit();
return new Message() { MsgType = MsgType.OK, Content = "移库成功" };
}
}
catch (Exception ex)
{
LogUtil.log.Error(ex.ToString());
return new Message() { MsgType = MsgType.Error, Content = ex.Message };
}
}