/// <summary>
/// 取得dat每一行的資料
/// </summary>
/// <param name="TxtPath">Dat的路徑</param>
/// <param name="IndexToRead">想要從哪一行開始抓取</param>
/// <param name="TxtData">抓取的資料</param>
/// <returns></returns>
public static bool ReadFileData(string DatPath, int IndexToRead, out string[] DatData)
{
DatData = new string[] { };
try
{
List <string> tempDataStr = new List <string>();
string[] TemplatePostData = System.IO.File.ReadAllLines(DatPath);
if (TemplatePostData.Length == 0)
{
CaxLog.ShowListingWindow(Path.GetFileName(DatPath) + "資料為空，請檢查");
DatData = new string[] { };
return(false);
}
DatData = new string[TemplatePostData.Length];
for (int i = 0; i < TemplatePostData.Length; i++)
{
if (i >= IndexToRead)
{
tempDataStr.Add(TemplatePostData[i]);
}
}
DatData = tempDataStr.ToArray();
}
catch (System.Exception ex)
{
DatData = new string[] { };
return(false);
}
return(true);
}
//獲得所有刀具名稱
public static bool FindAllMachineToolName(out List <string> toolNameList)
{
toolNameList = new List <string>();
try
{
Part workPart = theSession.Parts.Work;
//取得Machine Tool Root的NCGroup
NCGroup machineToolRoot = workPart.CAMSetup.GetRoot(CAMSetup.View.MachineTool);
CAMObject[] toolRootMenberAry = machineToolRoot.GetMembers();
foreach (CAMObject member in toolRootMenberAry)
{
if (member.Name != "NONE")
{
toolNameList.Add(member.Name);
}
}
}
catch (System.Exception ex)
{
CaxLog.ShowListingWindow("FindAllMachineToolName()..." + ex.Message);
return(false);
}
return(true);
}
//獲得刀具名稱，若有重複的會自動加底線流水號
public static bool GetToolName(string insertName, string holderName, out string toolName)
{
toolName = "";
try
{
List <string> allToolNameList;
FindAllMachineToolName(out allToolNameList);
string tempName = (holderName == "") ? insertName : insertName + "_" + holderName;
if (allToolNameList.Contains(tempName))
{
List <string> sameNameToolList = allToolNameList.FindAll(
qq =>
qq.ToUpper().Contains(tempName.ToUpper()) &&
qq.Length - tempName.Length <= 2);
toolName = tempName + "_" + sameNameToolList.Count.ToString();
}
else
{
toolName = tempName;
}
}
catch (System.Exception ex)
{
CaxLog.ShowListingWindow("GetToolName()..." + ex.Message);
return(false);
}
return(true);
}
public static bool CreateNewEmptyComp(string comp_path, out NXOpen.Assemblies.Component component, string TemplateFileName = "model-plain-1-mm-template.prt", string ReferenceSetName = "Entire Part")
{
try
{
Session theSession = Session.GetSession();
Part workPart = theSession.Parts.Work;
Part displayPart = theSession.Parts.Display;
// ----------------------------------------------
// Menu: Assemblies->Components->Create New Component...
// ----------------------------------------------
FileNew fileNew1;
fileNew1 = theSession.Parts.FileNew();
fileNew1.TemplateFileName = TemplateFileName;
fileNew1.Application = FileNewApplication.Modeling;
fileNew1.Units = NXOpen.Part.Units.Millimeters;
//fileNew1.TemplateType = FileNewTemplateType.Item;
fileNew1.NewFileName = comp_path;
fileNew1.MasterFileName = "";
fileNew1.UseBlankTemplate = false;
fileNew1.MakeDisplayedPart = false;
string newNameNoExt = "";
newNameNoExt = Path.GetFileNameWithoutExtension(comp_path);
string newNameNoExtUpper = "";
newNameNoExtUpper = newNameNoExt.ToUpper();
NXOpen.Assemblies.CreateNewComponentBuilder createNewComponentBuilder1;
createNewComponentBuilder1 = workPart.AssemblyManager.CreateNewComponentBuilder();
createNewComponentBuilder1.NewComponentName = newNameNoExtUpper;
createNewComponentBuilder1.ReferenceSet = NXOpen.Assemblies.CreateNewComponentBuilder.ComponentReferenceSetType.EntirePartOnly;
createNewComponentBuilder1.ReferenceSetName = ReferenceSetName;
// ----------------------------------------------
// Dialog Begin Create New Component
// ----------------------------------------------
createNewComponentBuilder1.ReferenceSet = NXOpen.Assemblies.CreateNewComponentBuilder.ComponentReferenceSetType.Model;
createNewComponentBuilder1.NewFile = fileNew1;
NXObject nXObject1;
nXObject1 = createNewComponentBuilder1.Commit();
component = (NXOpen.Assemblies.Component)nXObject1;
//UI.GetUI().NXMessageBox.Show("Message", NXMessageBox.DialogType.Information, component.Name);
createNewComponentBuilder1.Destroy();
}
catch (System.Exception ex)
{
CaxLog.ShowListingWindow(ex.ToString());
component = null;
return(false);
}
return(true);
}
/// <summary>
/// 取得Operatrion程式名
/// </summary>
/// <param name="operTag"></param>
/// <param name="operName"></param>
/// <returns></returns>
public static string AskOperNameFromTag(Tag operTag)
{
string operName = "";
try
{
theUfSession.Oper.AskNameFromTag(operTag, out operName);
return(operName);
}
catch (System.Exception ex)
{
CaxLog.ShowListingWindow("使用AskOperNameFromTag出錯：" + ex.ToString());
return(operName);
}
}
/// <summary>
/// 取得Operation加工方法
/// </summary>
/// <param name="operTag"></param>
/// <param name="operMethodName"></param>
/// <returns></returns>
public static bool AskOperMethodNameFromTag(Tag operTag, out string operMethodName)
{
operMethodName = "";
try
{
Tag bb;
theUfSession.Oper.AskMethodGroup(operTag, out bb);
NXOpen.CAM.Method cc = (NXOpen.CAM.Method)NXObjectManager.Get(bb);
operMethodName = cc.Name;
}
catch (System.Exception ex)
{
CaxLog.ShowListingWindow("使用AskOperMethodNameFromTag出錯：" + ex.ToString());
return(false);
}
return(true);
}
/// <summary>
/// 以另存檔案的方式修改Part名稱，可指定是否刪除原檔案，預設為刪除
/// </summary>
/// <param name="Part"></param>
/// <param name="NewPartName"></param>
/// <param name="DeleteOldPart"></param>
/// <returns></returns>
public static bool RenamePart(NXOpen.Part part, string NewPartName, bool DeleteOldPart = true)
{
try
{
Part currentworkpart = theSession.Parts.Work;
theSession.Parts.SetWork(part);
string oldPartPath = part.FullPath;
string newPartPath = string.Format("{0}\\{1}.prt", Path.GetDirectoryName(oldPartPath), NewPartName);
if (File.Exists(newPartPath))
{
File.Delete(newPartPath);
}
//另存成新的檔案架構名稱
PartSaveStatus partSaveStatus1;
partSaveStatus1 = part.SaveAs(Path.GetDirectoryName(newPartPath) + "\\" + Path.GetFileNameWithoutExtension(newPartPath));
partSaveStatus1.Dispose();
//刪除舊有檔案
if (DeleteOldPart)
{
if (File.Exists(oldPartPath))
{
File.Delete(oldPartPath);
}
}
theSession.Parts.SetWork(currentworkpart);
}
catch (Exception ex)
{
CaxLog.ShowListingWindow(ex.Message);
return(false);
}
return(true);
}
public static bool CreateTcutterToolNxopen()
{
try
{
Part workPart = theSession.Parts.Work;
//取得Machine Tool Root的NCGroup
NCGroup machineToolRoot = workPart.CAMSetup.GetRoot(CAMSetup.View.MachineTool);
//建立刀具
string toolType = "mill_planar";
string toolSubtype = "T_CUTTER";
string toolName = "TestTool";
NCGroup createToolGroup = workPart.CAMSetup.CAMGroupCollection.CreateTool(
machineToolRoot, toolType, toolSubtype, NCGroupCollection.UseDefaultName.True, toolName);
Tool createTool = (Tool)createToolGroup;
//設定刀具參數
NXOpen.CAM.TToolBuilder toolBuilder;
toolBuilder = workPart.CAMSetup.CAMGroupCollection.CreateTToolBuilder(createTool);
//設定刀具直徑(Tool>Dimensions>Diameter)
toolBuilder.TlDiameterBuilder.Value = 26.0;
//設定刀桿直徑(Tool>Dimensions>Shank Diameter)
toolBuilder.TlShankDiaBuilder.Value = 10.0;
//設定刀尖R角(Tool>Dimensions>Lower Radius)
toolBuilder.TlLowCorRadBuilder.Value = 2.0;
//設定刀刃上R角(Tool>Dimensions>Up Radius)
toolBuilder.TlUpCorRadBuilder.Value = 3.0;
//設定刀長(Tool>Dimensions>Length)
toolBuilder.TlHeightBuilder.Value = 30.0;
//設定刃長(Tool>Dimensions>Flute Length)
toolBuilder.TlFluteLnBuilder.Value = 25.0;
//設定刃數(Tool>Dimensions>Flutes)
toolBuilder.TlNumFlutesBuilder.Value = 5;
//設定刀把階段
//設定段數(Holder>Holder Steps>Step)
int sectionIndex = 0;
//設定直徑(Holder>Holder Steps>Diameter)
double sectionDiameter = 60.0;
//設定長度(Holder>Holder Steps>Length)
double sectionLength = 20.0;
//設定錐度(Holder>Holder Steps>Taper Angle)
double sectionTaper = 2.0;
//設定下端R角(Holder>Holder Steps>Corner Radius)
double sectionRadius = 1.0;
//新增階段
toolBuilder.HolderSectionBuilder.Add(sectionIndex, sectionDiameter, sectionLength, sectionTaper, sectionRadius);
toolBuilder.Commit();
toolBuilder.Destroy();
}
catch (System.Exception ex)
{
CaxLog.ShowListingWindow(ex.Message);
return(false);
}
return(true);
}
public static bool CreateMillToolNxopen(int toolNo, MillingToolData millToolData, out Tool millTool)
{
millTool = null;
try
{
Part workPart = theSession.Parts.Work;
//取得Machine Tool Root的NCGroup
NCGroup machineToolRoot = workPart.CAMSetup.GetRoot(CAMSetup.View.MachineTool);
//建立刀具
string toolType = "mill_planar";
string toolSubtype = "MILL";
string toolName = "";
string preToolName = string.Format("T{0}_{1}", toolNo, millToolData.CUTTER_NAME);
GetToolName(preToolName, "", out toolName);
NCGroup createToolGroup = workPart.CAMSetup.CAMGroupCollection.CreateTool(
machineToolRoot, toolType, toolSubtype, NCGroupCollection.UseDefaultName.False, toolName);
Tool createTool = (Tool)createToolGroup;
//設定刀具參數
NXOpen.CAM.MillToolBuilder toolBuilder;
toolBuilder = workPart.CAMSetup.CAMGroupCollection.CreateMillToolBuilder(createTool);
//設定刀具直徑(Tool>Dimensions>Diameter)
toolBuilder.TlDiameterBuilder.Value = double.Parse(millToolData.DIAMETER);
//設定刀尖R角(Tool>Dimensions>Lower Radius)
toolBuilder.TlCor1RadBuilder.Value = double.Parse(millToolData.RADIUS);
//設定錐度(Tool>Dimensions>Taper Angle)
toolBuilder.TlTaperAngBuilder.Value = double.Parse(millToolData.FLUTE_B_ANGLE);
//設定刀尖斜度(Tool>Dimensions>Tip Angle)
toolBuilder.TlTipAngBuilder.Value = double.Parse(millToolData.FLUTE_A_ANGLE);
//設定刀長(Tool>Dimensions>Length)
if (double.Parse(millToolData.NECK_LENGTH) != 0.0 &&
double.Parse(millToolData.NECK_DIAMETER) != double.Parse(millToolData.DIAMETER)) //有輸入NL而且ND跟D不同
{
toolBuilder.TlHeightBuilder.Value = double.Parse(millToolData.NECK_LENGTH);
}
else
{
toolBuilder.TlHeightBuilder.Value = 0.0; //刀長設為0，其餘長度丟到holder
}
//設定刃長(Tool>Dimensions>Flute Length)
toolBuilder.TlFluteLnBuilder.Value = double.Parse(millToolData.FLUTE_LENGTH);
//設定刃數(Tool>Dimensions>Flutes)
toolBuilder.TlNumFlutesBuilder.Value = int.Parse(millToolData.FLUTE_NUM);
//設定刀把階段
//設定段數(Holder>Holder Steps>Step)
int sectionIndex = 0;
//設定直徑(Holder>Holder Steps>Diameter)
double sectionDiameter = 60.0;
//設定長度(Holder>Holder Steps>Length)
double sectionLength = 20.0;
//設定錐度(Holder>Holder Steps>Taper Angle)
double sectionTaper = 2.0;
//設定下端R角(Holder>Holder Steps>Corner Radius)
double sectionRadius = 1.0;
//新增階段
toolBuilder.HolderSectionBuilder.Add(sectionIndex, sectionDiameter, sectionLength, sectionTaper, sectionRadius);
toolBuilder.Commit();
toolBuilder.Destroy();
}
catch (System.Exception ex)
{
CaxLog.ShowListingWindow("CreateMillToolNxopen()..." + ex.Message);
return(false);
}
return(true);
}
//建立車刀刀具(給刀片、刀桿資料類別)
public static bool CreateTurningToolNxopen(int toolNo, TurningInsertData insertData, ExternalHolderData exHolder, InternalHolderData inHolder, out Tool turningTool)
{
turningTool = null;
try
{
Part workPart = theSession.Parts.Work;
//取得Machine Tool Root的NCGroup
NCGroup machineToolRoot = workPart.CAMSetup.GetRoot(CAMSetup.View.MachineTool);
//建立刀具
string toolType = "turning";
string toolSubtype = "OD_80_R";
string toolName = "";
string preToolName = string.Format("T{0}_{1}", toolNo.ToString(), insertData.PRODUCT_NO);
GetToolName(preToolName, "", out toolName);
NCGroup createToolGroup = workPart.CAMSetup.CAMGroupCollection.CreateTool(
machineToolRoot, toolType, toolSubtype, NCGroupCollection.UseDefaultName.False, toolName);
Tool createTool = (Tool)createToolGroup;
string shapeCode = insertData.ISO_SPEC.Substring(0, 1);
string relifeAngleCode = insertData.ISO_SPEC.Substring(1, 1);
string toleranceCode = insertData.ISO_SPEC.Substring(2, 1);
string crossSectionCode = insertData.ISO_SPEC.Substring(3, 1);
string sizeCode = insertData.ISO_SPEC.Substring(4, 2);
string thicknessCode = insertData.ISO_SPEC.Substring(6, 2);
string radiusColde = insertData.ISO_SPEC.Substring(8, 2);
//開始設定刀具參數
NXOpen.CAM.TurnToolBuilder turnToolBuilder;
turnToolBuilder = workPart.CAMSetup.CAMGroupCollection.CreateTurnToolBuilder(createTool);
//設定刀號
turnToolBuilder.TlNumberBuilder.Value = toolNo;
//設定刀片形狀(Tool>Insert>ISO Insert Shape)
turnToolBuilder.InsertShape = GetTurningInsertShape(shapeCode);
//設定刀片位置(Tool>Insert>Insert Position)
turnToolBuilder.InsertPosition = TurningToolBuilder.InsertPositions.Underside;
//設定刀片刀尖R角(Tool>Dimensions>Nose Radius)
turnToolBuilder.NoseRadiusBuilder.Value = GetTurningInsertRadius(radiusColde);
//設定刀片切削角度(Tool>Dimensions>Orient angle)
//turnToolBuilder.OrientAngleBuilder.Value = 80;
//設定刀片刀尖夾角(Tool>Dimensions>Nose Angle，刀片形狀需指定為X)
if (turnToolBuilder.InsertShape == TurnToolBuilder.InsertShapes.User)
{
turnToolBuilder.NoseAngleBuilder.Value = 20;
}
//設定刀片尺寸類型(Tool>Insert Size>Measurement)
turnToolBuilder.SizeOption = TurnToolBuilder.SizeOptions.InscribedCircle;
//設定刀片尺寸(Tool>Insert Size>Length)
turnToolBuilder.SizeBuilder.Value = GetTurningInsertSize(shapeCode, sizeCode);
//設定刀片後角類型(Tool>More>Relief Angle)
turnToolBuilder.ReliefAngleType = GetTurningInsertReliefAngle(relifeAngleCode);
//設定刀片後角角度(Tool>More>Relief Angle，刀片後角類型需指定為O)
if (turnToolBuilder.ReliefAngleType == TurnToolBuilder.ReliefAngleTypes.OOther)
{
turnToolBuilder.ReliefAngleBuilder.Value = 45;
}
//設定刀片厚度(Tool>More>Thickness)
double thicknessValue = 0.0;
turnToolBuilder.ThicknessType = GetTurninInsertThickness(thicknessCode, out thicknessValue);
if (turnToolBuilder.ThicknessType == TurnToolBuilder.ThicknessTypes.ThicknessUserDefined)
{
turnToolBuilder.ThicknessBuilder.Value = thicknessValue;
}
#region 刀桿設定
if (exHolder == null && inHolder == null)
{
//設定是否使用刀桿(Tool>Holder(Shank)>Use Turn Holder)
turnToolBuilder.HolderUse = false;
}
else
{
//設定是否使用刀桿(Tool>Holder(Shank)>Use Turn Holder)
turnToolBuilder.HolderUse = true;
if (exHolder != null)
{
//外徑
turnToolBuilder.TlDescription = exHolder.PRODUCT_NO;
string holderStyleCode = exHolder.ISO_CODE.Substring(2, 1);
//設定刀桿類型(Tool>Holder(Shank)>Style)
turnToolBuilder.HolderStyle = GetTurningHolderStyle(holderStyleCode);
//設定刀桿左右手(Tool>Holder(Shank)>Hand)
turnToolBuilder.HolderHand = GetTurningHolderHand(exHolder.HAND_SIDE);
//設定刀桿方形圓形(Tool>Holder(Shank)>Shank Type)
turnToolBuilder.HolderShankType = TurnToolBuilder.HolderShankTypes.Square;
//設定刀桿角度(Holder>Dimensions>Holder Angle)
turnToolBuilder.HolderAngleBuilder.Value = 90.0;
//設定刀桿尺寸
//設定刀具長度(Holder>Dimensions>Length)
turnToolBuilder.HolderLengthBuilder.Value = double.Parse(exHolder.SHANK_L_NX);
//設定刀尖位置(寬)(Holder>Dimensions>Width)
turnToolBuilder.HolderWidthBuilder.Value = double.Parse(exHolder.FUNC_W_NX);
//設定刀桿寬度(Holder>Dimensions>Shank Width)
turnToolBuilder.HolderShankWidthBuilder.Value = double.Parse(exHolder.SHANK_W);
//設定刀尖位置(長)(Holder>Dimensions>Shank Line)
turnToolBuilder.HolderShankLineBuilder.Value = double.Parse(exHolder.FUNC_L_NX);
}
else
{
//內徑
turnToolBuilder.TlDescription = inHolder.PRODUCT_NO;
string holderStyleCode = inHolder.ISO_CODE.Substring(2, 1);
//設定刀桿類型(Tool>Holder(Shank)>Style)
turnToolBuilder.HolderStyle = GetTurningHolderStyle(holderStyleCode);
//設定刀桿左右手(Tool>Holder(Shank)>Hand)
turnToolBuilder.HolderHand = GetTurningHolderHand(inHolder.HAND_SIDE);
//設定刀桿方形圓形(Tool>Holder(Shank)>Shank Type)
turnToolBuilder.HolderShankType = TurnToolBuilder.HolderShankTypes.Round;
//設定刀桿角度(Holder>Dimensions>Holder Angle)
turnToolBuilder.HolderAngleBuilder.Value = 0.0;
//設定刀桿尺寸
//設定刀具長度(Holder>Dimensions>Length)
turnToolBuilder.HolderLengthBuilder.Value = double.Parse(inHolder.SHANK_L_NX);
//設定刀尖位置(寬)(Holder>Dimensions>Width)
turnToolBuilder.HolderWidthBuilder.Value = double.Parse(inHolder.FUNC_W_NX);
//設定刀桿寬度(Holder>Dimensions>Shank Width)
turnToolBuilder.HolderShankWidthBuilder.Value = double.Parse(inHolder.SHANK_W);
//設定刀尖位置(長)(Holder>Dimensions>Shank Line)
turnToolBuilder.HolderShankLineBuilder.Value = double.Parse(inHolder.FUNC_L_NX);
}
//設定刀桿刀片是否固定角度(Tool>Holder(Shank)>Lock Insert and Holder Orientation，刀桿類型需指定為Ud)
if (turnToolBuilder.HolderStyle == TurnToolBuilder.HolderStyles.Ud)
{
turnToolBuilder.HolderLock = false;
}
}
#endregion
////設定Tracking Point
//NXOpen.CAM.TrackingBuilder trackingBuilder = turnToolBuilder.TrackingBuilder;
////取得預設的Tracking Point
//NXObject trackingPoint = trackingBuilder.GetTrackPoint(0);
////修改參數
////名稱(Tracking>Tracking Points>Name)
//string tpName = "TP";
////位置點(Tracking>Tracking Points>P Number，0-8代表p2, p6, p1, p7, p9, p5, p3, p8, p4)
//int tpNo = 6;
//trackingBuilder.Modify(trackingPoint, tpName, 0, tpNo, 0, 0, 0, 0, 0, 0);
//圓形刀片專用
//turnToolBuilder.ButtonDiameterBuilder
//turnToolBuilder.HolderControlAngleBuilder
//turnToolBuilder.HolderControlWidthBuilder
turningTool = (NXOpen.CAM.Tool)turnToolBuilder.Commit();
turnToolBuilder.Destroy();
theUfSession.UiOnt.Refresh();
}
catch (System.Exception ex)
{
CaxLog.ShowListingWindow("CreateTurningToolNxopen()..." + ex.Message);
return(false);
}
return(true);
}
