public int Read_2352(byte[] buffer, int offset)
{
//user data
int read = Blob.BaseBlob.Read(Offset, buffer, offset + 16, 2048);
//if we read the 2048 physical bytes OK, then return the complete sector
if (read == 2048 && has_extra_data)
{
Buffer.BlockCopy(extra_data, 0, buffer, offset, 16);
Buffer.BlockCopy(extra_data, 16, buffer, offset + 2064, 4 + 8 + 172 + 104);
return(2352);
}
//sync
buffer[offset + 0] = 0x00; buffer[offset + 1] = 0xFF; buffer[offset + 2] = 0xFF; buffer[offset + 3] = 0xFF;
buffer[offset + 4] = 0xFF; buffer[offset + 5] = 0xFF; buffer[offset + 6] = 0xFF; buffer[offset + 7] = 0xFF;
buffer[offset + 8] = 0xFF; buffer[offset + 9] = 0xFF; buffer[offset + 10] = 0xFF; buffer[offset + 11] = 0x00;
//sector address
buffer[offset + 12] = bcd_aba_min;
buffer[offset + 13] = bcd_aba_sec;
buffer[offset + 14] = bcd_aba_frac;
//mode 1
buffer[offset + 15] = 1;
//calculate EDC and poke into the sector
uint edc = ECM.EDC_Calc(buffer, offset, 2064);
ECM.PokeUint(buffer, 2064, edc);
//intermediate
for (int i = 0; i < 8; i++)
{
buffer[offset + 2068 + i] = 0;
}
//ECC
ECM.ECC_Populate(buffer, offset, buffer, offset, false);
//VALIDATION - check our homemade algorithms against code derived from ECM
////EDC
//GPL_ECM.edc_validateblock(buffer, 2064, buffer, offset + 2064);
////ECC
//GPL_ECM.ecc_validate(buffer, offset, false);
//if we read the 2048 physical bytes OK, then return the complete sector
if (read == 2048)
{
extra_data = new byte[16 + 4 + 8 + 172 + 104];
Buffer.BlockCopy(buffer, 0, extra_data, 0, 16);
Buffer.BlockCopy(buffer, 2064, extra_data, 16, 4 + 8 + 172 + 104);
has_extra_data = true;
return(2352);
}
//otherwise, return a smaller value to indicate an error
else
{
return(read);
}
}
void Reconstruct(byte[] secbuf, int type)
{
//sync
secbuf[0] = 0;
for (int i = 1; i <= 10; i++)
{
secbuf[i] = 0xFF;
}
secbuf[11] = 0x00;
//misc stuff
switch (type)
{
case 1:
//mode 1
secbuf[15] = 0x01;
//reserved
for (int i = 0x814; i <= 0x81B; i++)
{
secbuf[i] = 0x00;
}
break;
case 2:
case 3:
//mode 2
secbuf[15] = 0x02;
//flags - apparently CD XA specifies two copies of these 4bytes of flags. ECM didnt store the first copy; so we clone the second copy which was stored down to the spot for the first copy.
secbuf[0x10] = secbuf[0x14];
secbuf[0x11] = secbuf[0x15];
secbuf[0x12] = secbuf[0x16];
secbuf[0x13] = secbuf[0x17];
break;
}
//edc
switch (type)
{
case 1: ECM.PokeUint(secbuf, 0x810, ECM.EDC_Calc(secbuf, 0, 0x810)); break;
case 2: ECM.PokeUint(secbuf, 0x818, ECM.EDC_Calc(secbuf, 16, 0x808)); break;
case 3: ECM.PokeUint(secbuf, 0x92C, ECM.EDC_Calc(secbuf, 16, 0x91C)); break;
}
//ecc
switch (type)
{
case 1: ECM.ECC_Populate(secbuf, 0, secbuf, 0, false); break;
case 2: ECM.ECC_Populate(secbuf, 0, secbuf, 0, true); break;
}
}
/// <summary>
/// Synthesizes the complete ECM data (EDC + ECC) for a Mode 1 data sector (and puts it in place)
/// Make sure everything else in the sector userdata is done before calling this
/// </summary>
public static void ECM_Mode1(byte[] buf2352, int offset, int LBA)
{
//EDC
uint edc = ECM.EDC_Calc(buf2352, offset, 2064);
ECM.PokeUint(buf2352, offset + 2064, edc);
//reserved, zero
for (int i = 0; i < 8; i++)
{
buf2352[offset + 2068 + i] = 0;
}
//ECC
ECM.ECC_Populate(buf2352, offset, buf2352, offset, false);
}
/// <summary>
/// Synthesizes the EDC checksum for a Mode 2 Form 2 data sector (and puts it in place)
/// </summary>
public static void EDC_Mode2_Form2(byte[] buf2352, int offset)
{
uint edc = ECM.EDC_Calc(buf2352, offset + 16, 2324 + 8);
ECM.PokeUint(buf2352, offset + 2348, edc);
}
/// <summary>
/// Synthesizes the EDC checksum for a Mode 2 Form 1 data sector (and puts it in place)
/// </summary>
public static void EDC_Mode2_Form1(byte[] buf2352, int offset)
{
uint edc = ECM.EDC_Calc(buf2352, offset + 16, 2048 + 8);
ECM.PokeUint(buf2352, offset + 2072, edc);
}