Esempio n. 1
0
        /// <summary>
        /// 初始化;
        /// </summary>
        protected void Init()
        {
            if (mViewBase == null)
            {
                return;
            }
            CDimTools dimTools = CDimTools.GetInstance();

            //初始化视图包围盒;
            dimTools.InitViewBox();

            //获取所有螺钉的数据字典;
            Dictionary <Identifier, TSD.Bolt> dicIdentifierBolt = dimTools.GetAllBoltInDrawing(mViewBase);

            //获取所有Drawing视图中的Part;
            List <TSD.Part> partList = dimTools.GetAllPartInDrawing(mViewBase);

            foreach (TSD.Part partInDrawing in partList)
            {
                //1.获取部件的信息;
                TSM.ModelObject modelObjectInModel = dimTools.TransformDrawingToModel(partInDrawing);
                TSM.Part        partInModel        = modelObjectInModel as TSM.Part;
                CMrPart         mrPart             = null;

                if (CMrMainBeam.GetInstance().mPartInModel.Identifier.GUID == partInModel.Identifier.GUID)
                {
                    mrPart    = CMrMainBeam.GetInstance();
                    mMainBeam = CMrMainBeam.GetInstance();
                    mMainBeam.mPartInDrawing = partInDrawing;
                }
                else
                {
                    mrPart = new CMrPart(partInModel, partInDrawing);
                }

                dimTools.InitMrPart(modelObjectInModel, mViewBase, mrPart);
                AppendMrPart(mrPart);
                InitMrPart(mrPart);

                mrPart.GetBeamTopViewInfo().InitMrPartTopViewInfo();

                //2.获取部件中的所有螺钉组;
                List <BoltArray> boltArrayList = dimTools.GetAllBoltArray(partInModel);

                foreach (BoltArray boltArray in boltArrayList)
                {
                    TSD.Bolt boltInDrawing = dicIdentifierBolt[boltArray.Identifier];

                    CMrBoltArray mrBoltArray = new CMrBoltArray(boltArray, boltInDrawing);
                    dimTools.InitMrBoltArray(boltArray, mViewBase, mrBoltArray);
                    InitMrBoltArray(mrBoltArray);
                    mrPart.AppendMrBoltArray(mrBoltArray);
                }
                dimTools.UpdateViewBox(mrPart);
            }
            CMrMarkManager.GetInstance().Clear();
        }
Esempio n. 2
0
        /// <summary>
        /// 获取单例;
        /// </summary>
        /// <returns></returns>
        public static CMrMarkManager GetInstance()
        {
            if (null == mInstance)
            {
                mInstance = new CMrMarkManager();
            }

            return(mInstance);
        }
        /// <summary>
        /// 初始化;
        /// </summary>
        protected void Init()
        {
            if (mViewBase == null)
            {
                return;
            }

            CDimTools dimTools = CDimTools.GetInstance();

            //初始化视图包围盒;
            dimTools.InitViewBox();

            //获取所有螺钉的数据字典;
            Dictionary <Identifier, TSD.Bolt> dicIdentifierBolt = dimTools.GetAllBoltInDrawing(mViewBase);

            //获取所有Drawing视图中的Part;
            List <TSD.Part> partList = dimTools.GetAllPartInDrawing(mViewBase);

            foreach (TSD.Part partInDrawing in partList)
            {
                //1.获取部件的信息;
                TSM.ModelObject modelObjectInModel = dimTools.TransformDrawingToModel(partInDrawing);
                TSM.Part        partInModel        = modelObjectInModel as TSM.Part;

                CMrPart mrPart = null;

                if (CMrMainBeam.GetInstance().mPartInModel.Identifier.GUID == partInModel.Identifier.GUID)
                {
                    mrPart    = CMrMainBeam.GetInstance();
                    mMainBeam = CMrMainBeam.GetInstance();
                    mMainBeam.mPartInDrawing = partInDrawing;
                }
                else
                {
                    mrPart = new CMrPart(partInModel, partInDrawing);
                }

                dimTools.InitMrPart(modelObjectInModel, mViewBase, mrPart);
                AppendMrPart(mrPart);

                mrPart.GetCylinderTopViewInfo().InitCylinderTopViewInfo();
                InitMrPart(mrPart);

                //第一次遍历时就把所有的垂直加筋板保存起来,后面需要使用;
                if (CDimTools.GetInstance().IsTwoVectorParallel(mrPart.mNormal, new Vector(1, 0, 0)))
                {
                    mVerticalConnectPlateList.Add(mrPart);
                }

                //2.获取部件中的所有螺钉组;
                List <BoltArray> boltArrayList = dimTools.GetAllBoltArray(partInModel);

                foreach (BoltArray boltArray in boltArrayList)
                {
                    TSD.Bolt boltInDrawing = dicIdentifierBolt[boltArray.Identifier];

                    CMrBoltArray mrBoltArray = new CMrBoltArray(boltArray, boltInDrawing);
                    dimTools.InitMrBoltArray(boltArray, mViewBase, mrBoltArray);
                    mrPart.AppendMrBoltArray(mrBoltArray);
                }
                dimTools.UpdateViewBox(mrPart);
            }

            InitCylinderGridLine();

            //构建剪切板的拓扑结构;
            CMrClipPlateManager.GetInstance().BuildMrClipPlate(mMrPartList, MrViewType.CylinderTopView);

            //清空标记管理器中的数据;
            CMrMarkManager.GetInstance().Clear();
        }
Esempio n. 4
0
        /// <summary>
        /// 初始化函数;
        /// </summary>
        protected void Init()
        {
            if (mViewBase == null)
            {
                return;
            }

            //初始化视图的包围盒;
            CDimTools.GetInstance().InitViewBox();

            //获取所有螺钉的数据字典;
            Dictionary <Identifier, TSD.Bolt> dicIdentifierBolt = CDimTools.GetInstance().GetAllBoltInDrawing(mViewBase);

            //获取所有Drawing视图中的Part;
            List <TSD.Part> partList = CDimTools.GetInstance().GetAllPartInDrawing(mViewBase);

            foreach (TSD.Part partInDrawing in partList)
            {
                //1.获取部件的信息;
                TSM.ModelObject modelObjectInModel = CDimTools.GetInstance().TransformDrawingToModel(partInDrawing);
                TSM.Part        partInModel        = modelObjectInModel as TSM.Part;

                CMrPart mrPart = null;
                if (CMrMainBeam.GetInstance().mPartInModel.Identifier.GUID == partInModel.Identifier.GUID)
                {
                    mrPart    = CMrMainBeam.GetInstance();
                    mMainBeam = CMrMainBeam.GetInstance();
                    mMainBeam.mPartInDrawing = partInDrawing;
                    CDimTools.GetInstance().InitMrPart(modelObjectInModel, mViewBase, mrPart);
                    AppendMrPart(mrPart);
                }
                else
                {
                    mrPart = new CMrPart(partInModel, partInDrawing);
                    CDimTools.GetInstance().InitMrPart(modelObjectInModel, mViewBase, mrPart);
                    AppendMrPart(mrPart);
                }

                //2.获取部件中的所有螺钉组;
                List <BoltArray> boltArrayList = CDimTools.GetInstance().GetAllBoltArray(partInModel);

                foreach (BoltArray boltArray in boltArrayList)
                {
                    TSD.Bolt     boltInDrawing = dicIdentifierBolt[boltArray.Identifier];
                    CMrBoltArray mrBoltArray   = new CMrBoltArray(boltArray, boltInDrawing);

                    CDimTools.GetInstance().InitMrBoltArray(boltArray, mViewBase, mrBoltArray);
                    mrPart.AppendMrBoltArray(mrBoltArray);
                }

                CDimTools.GetInstance().UpdateViewBox(mrPart);

                UpdateMinAndMaxYPart(mrPart);
            }

            //移除主柱子;
            mMrPartList.Remove(mMainBeam);

            //清空零件标记管理器中的零件标记;
            CMrMarkManager.GetInstance().Clear();

            //构建门式框架结构柱标注顶视图的拓扑;
            CMrCylinderDoorTopManager.GetInstance().BuildCylinderDoorTopTopo(mMrPartList);
        }
        /// <summary>
        /// 初始化函数;
        /// </summary>
        protected void Init()
        {
            if (mViewBase == null)
            {
                return;
            }

            CDimTools dimTools = CDimTools.GetInstance();

            //初始化视图的包围盒;
            dimTools.InitViewBox();

            Point viewMinPoint = mViewBase.RestrictionBox.MinPoint;
            Point viewMaxPoint = mViewBase.RestrictionBox.MaxPoint;

            //获取所有螺钉的数据字典;
            Dictionary <Identifier, TSD.Bolt> dicIdentifierBolt = dimTools.GetAllBoltInDrawing(mViewBase);

            //获取所有Drawing视图中的Part;
            List <TSD.Part> partList = dimTools.GetAllPartInDrawing(mViewBase);

            foreach (TSD.Part partInDrawing in partList)
            {
                //1.获取部件的信息;
                TSM.ModelObject modelObjectInModel = dimTools.TransformDrawingToModel(partInDrawing);
                TSM.Part        partInModel        = modelObjectInModel as TSM.Part;

                CMrPart mrPart = null;

                if (CMrMainBeam.GetInstance().mPartInModel.Identifier.GUID == partInModel.Identifier.GUID)
                {
                    mrPart    = CMrMainBeam.GetInstance();
                    mMainBeam = CMrMainBeam.GetInstance();
                    mMainBeam.mPartInDrawing = partInDrawing;
                }
                else
                {
                    mrPart = new CMrPart(partInModel, partInDrawing);
                }

                dimTools.InitMrPart(modelObjectInModel, mViewBase, mrPart);

                List <Point> pointList = mrPart.GetPointList();
                int          nCount    = pointList.Count;

                Comparison <Point> sorterX = new Comparison <Point>(CDimTools.ComparePointX);
                pointList.Sort(sorterX);
                Point minXPoint = pointList[0];
                Point maxXPoint = pointList[nCount - 1];

                if (minXPoint.X > viewMaxPoint.X || maxXPoint.X < viewMinPoint.X)
                {
                    continue;
                }

                Comparison <Point> sorterY = new Comparison <Point>(CDimTools.ComparePointY);
                pointList.Sort(sorterY);
                Point minYPoint = pointList[0];
                Point maxYPoint = pointList[nCount - 1];

                if (minYPoint.Y > viewMaxPoint.Y || maxYPoint.Y < viewMinPoint.Y)
                {
                    continue;
                }

                Comparison <Point> sorterZ = new Comparison <Point>(CDimTools.ComparePointZ);
                pointList.Sort(sorterZ);
                Point minZPoint = pointList[0];
                Point maxZPoint = pointList[nCount - 1];

                if (minZPoint.Z > viewMaxPoint.Z || maxZPoint.Z < viewMinPoint.Z)
                {
                    continue;
                }

                dimTools.UpdateViewBox(mrPart);

                AppendMrPart(mrPart);

                //2.获取部件中的所有螺钉组;
                List <BoltArray> boltArrayList = dimTools.GetAllBoltArray(partInModel);

                foreach (BoltArray boltArray in boltArrayList)
                {
                    TSD.Bolt     boltInDrawing = dicIdentifierBolt[boltArray.Identifier];
                    CMrBoltArray mrBoltArray   = new CMrBoltArray(boltArray, boltInDrawing);
                    dimTools.InitMrBoltArray(boltArray, mViewBase, mrBoltArray);
                    mrPart.AppendMrBoltArray(mrBoltArray);
                }
            }

            CMrMarkManager.GetInstance().Clear();
        }
        /// <summary>
        /// 初始化函数;
        /// </summary>
        protected void Init()
        {
            if (mViewBase == null)
            {
                return;
            }

            mDicBoltPoint.Clear();
            mYDicAttributeBoltArray.Clear();
            mXDicAttributeBoltArray.Clear();

            CDimTools dimTools = CDimTools.GetInstance();

            Point viewMinPoint = mViewBase.RestrictionBox.MinPoint;
            Point viewMaxPoint = mViewBase.RestrictionBox.MaxPoint;

            //获取所有螺钉的数据字典;
            Dictionary <Identifier, TSD.Bolt> dicIdentifierBolt = dimTools.GetAllBoltInDrawing(mViewBase);

            //获取所有Drawing视图中的Part;
            List <TSD.Part> partList = dimTools.GetAllPartInDrawing(mViewBase);

            foreach (TSD.Part partInDrawing in partList)
            {
                //1.获取部件的信息;
                TSM.ModelObject modelObjectInModel = dimTools.TransformDrawingToModel(partInDrawing);
                TSM.Part        partInModel        = modelObjectInModel as TSM.Part;

                CMrPart mrPart = null;

                if (CMrMainBeam.GetInstance().mPartInModel.Identifier.GUID == partInModel.Identifier.GUID)
                {
                    mrPart    = CMrMainBeam.GetInstance();
                    mMainBeam = CMrMainBeam.GetInstance();
                    mMainBeam.mPartInDrawing = partInDrawing;
                }
                else
                {
                    mrPart = new CMrPart(partInModel, partInDrawing);
                }

                dimTools.InitMrPart(modelObjectInModel, mViewBase, mrPart);

                Point minXPoint = mrPart.GetMinXPoint();
                Point maxXPoint = mrPart.GetMaxXPoint();

                if (minXPoint.X > viewMaxPoint.X || maxXPoint.X < viewMinPoint.X)
                {
                    continue;
                }

                Point minYPoint = mrPart.GetMinYPoint();
                Point maxYPoint = mrPart.GetMaxYPoint();

                if (minYPoint.Y > viewMaxPoint.Y || maxYPoint.Y < viewMinPoint.Y)
                {
                    continue;
                }

                Point minZPoint = mrPart.GetMinZPoint();
                Point maxZPoint = mrPart.GetMaxZPoint();

                if (minZPoint.Z > viewMaxPoint.Z || maxZPoint.Z < viewMinPoint.Z)
                {
                    continue;
                }

                AppendMrPart(mrPart);

                //2.获取部件中的所有螺钉组;
                List <BoltArray> boltArrayList = dimTools.GetAllBoltArray(partInModel);

                foreach (BoltArray boltArray in boltArrayList)
                {
                    TSD.Bolt     boltInDrawing = dicIdentifierBolt[boltArray.Identifier];
                    CMrBoltArray mrBoltArray   = new CMrBoltArray(boltArray, boltInDrawing);
                    dimTools.InitMrBoltArray(boltArray, mViewBase, mrBoltArray);
                    mrPart.AppendMrBoltArray(mrBoltArray);
                    InitMrBoltArray(mrBoltArray);
                }
            }

            CMrMarkManager.GetInstance().Clear();
        }