private void initLaunchEnable()
{
int error_code;
PluserActive active = PluserActive.OFF;
error_code = GetPulserTransmitDAQ.Active(SelectAscan.sessionIndex, SelectAscan.port, ref active);
if (error_code != 0)
{
return;
}
switch (active)
{
case PluserActive.OFF:
rdoOFF.Checked = true;
break;
case PluserActive.ON:
rdoON.Checked = true;
break;
default:
MessageShow.show("Error:Initial launch enable failed",
"错误：初始化发射使能失败!");
break;
}
}
/** Initial transmission RadioButton*/
private int initTrans()
{
int error_code;
RecieverType type = RecieverType.Pe;
error_code = GetPulserTransmitDAQ.RecieverMode(SelectAscan.sessionIndex, SelectAscan.port, ref type);
if (error_code != 0)
{
return(error_code);
}
switch (type)
{
case RecieverType.Pc:
RadioButtonThrough.Checked = true;
break;
case RecieverType.Pe:
RadioButtonReflection.Checked = true;
break;
default:
error_code = -1;
MessageShow.show("Warn:Initial RadioButton of Transmission failed!",
"警告:初始化探头收发模式的控件失败!");
break;
}
return(error_code);
}
private void initTransmitVoltage()
{
int error_code;
double intensity = 0;
error_code = GetPulserTransmitDAQ.Intensity(SelectAscan.sessionIndex, SelectAscan.port, ref intensity);
if (error_code != 0)
{
return;
}
if (intensity == 100)
{
rdo100.Checked = true;
}
else if (intensity == 400)
{
rdo400.Checked = true;
}
else
{
//MessageShow.show("Error:Initial transmit voltage failed!",
//"错误:初始化发射电压失败!");
}
}
private void initPRF()
{
int error_code;
uint prf = 0;
error_code = GetPulserTransmitDAQ.Prf(SelectAscan.sessionIndex, SelectAscan.port, ref prf);
if (error_code != 0)
{
return;
}
textBoxPrf.Text = prf.ToString();
}
private void initDelayTime()
{
int error_code;
double timeDelay = 0;
double pulseWidth = 0;
error_code = GetPulserTransmitDAQ.Delay(SelectAscan.sessionIndex, SelectAscan.port, ref timeDelay);
if (error_code != 0)
{
return;
}
error_code = GetPulserTransmitDAQ.Width(SelectAscan.sessionIndex, SelectAscan.port, ref pulseWidth);
if (error_code != 0)
{
return;
}
textBoxTimeDelay.Text = timeDelay.ToString();
textBoxPulseWidth.Text = pulseWidth.ToString();
}
private void initImpedanceMatch()
{
int error_code;
PulserDampingActive active = PulserDampingActive.OFF;
uint dampingValue = 0;
error_code = GetPulserTransmitDAQ.DampingActive(SelectAscan.sessionIndex, SelectAscan.port, ref active);
if (error_code != 0)
{
return;
}
error_code = GetPulserTransmitDAQ.DampingValue(SelectAscan.sessionIndex, SelectAscan.port, ref dampingValue);
if (error_code != 0)
{
return;
}
switch (active)
{
case PulserDampingActive.OFF:
chkImpedanceMatch.Checked = false;
textBoxImpedance.Enabled = false;
break;
case PulserDampingActive.ON:
chkImpedanceMatch.Checked = true;
textBoxImpedance.Enabled = true;
break;
default:
MessageShow.show("Error:Initial impedance match failed!",
"错误：初始化阻抗匹配失败!");
break;
}
textBoxImpedance.Text = dampingValue.ToString();
}
//使得筛选的通道和当前显示通道所有参数变得一样
public static int Param(uint sessionIndex, uint selPort)
{
int error_code = 0;
bool isSetPre = false;
double delay = 0;
double range = 0;
double gain = 0;
uint envlopDecay = 0;
AscanWaveDectionMode waveMode = AscanWaveDectionMode.SemiPositve;
RecieverType type = RecieverType.Pc;
AscanEnvelopActive envelopActive = AscanEnvelopActive.OFF;
int gateTol = 4;
TofMode tofMode = TofMode.Flank;
TofMode[] tofModeArr = new TofMode[gateTol];
GateAlarmLogic[] gateAlarmLogic = new GateAlarmLogic[gateTol];
GateAlarmActive[] gateAlarmActive = new GateAlarmActive[gateTol];
double[] gateDelay = new double[gateTol];
double[] gateWidth = new double[gateTol];
double[] threshold = new double[gateTol];
SuppressCounterActive[] scActive = new SuppressCounterActive[gateTol];
uint[] scCount = new uint[gateTol];
IFActive ifActive = IFActive.OFF;
AscanIFActive ascanIfActive = AscanIFActive.OFF;
//取得当前通道的所有参数
error_code = GetAsacnVideoDAQ.Delay(sessionIndex, selPort, ref delay);
error_code |= GetAsacnVideoDAQ.Range(sessionIndex, selPort, ref range);
error_code |= GetAsacnVideoDAQ.Range(sessionIndex, selPort, ref range);
error_code |= GetRecieverDAQ.AnalogGain(sessionIndex, selPort, ref gain);
error_code |= GetAsacnVideoDAQ.EnvlopDecayFactor(sessionIndex, selPort, ref envlopDecay);
error_code |= GetAsacnVideoDAQ.DetectionWaveMode(sessionIndex, selPort, ref waveMode);
error_code |= GetPulserTransmitDAQ.RecieverMode(sessionIndex, selPort, ref type);
error_code |= GetAsacnVideoDAQ.EnvlopActive(sessionIndex, selPort, ref envelopActive);
error_code |= GetGateDAQ.IFActive(sessionIndex, selPort, GateType.I, ref ifActive);
error_code |= GetAsacnVideoDAQ.IFActive(sessionIndex, selPort, ref ascanIfActive);
for (int i = 0; i < gateTol; i++)
{
GateType gateIndex = (GateType)i;
error_code |= GetGateDAQ.TofMode(sessionIndex, selPort, gateIndex, ref tofModeArr[i]);
error_code |= GetGateDAQ.AlarmLogic(sessionIndex, selPort, gateIndex, ref gateAlarmLogic[i]);
error_code |= GetGateDAQ.AlarmActive(sessionIndex, selPort, gateIndex, ref gateAlarmActive[i]);
error_code |= GetGateDAQ.Delay(sessionIndex, selPort, gateIndex, ref gateDelay[i]);
error_code |= GetGateDAQ.Width(sessionIndex, selPort, gateIndex, ref gateWidth[i]);
error_code |= GetGateDAQ.Threshold(sessionIndex, selPort, gateIndex, ref threshold[i]);
error_code |= GetGateDAQ.ScActive(sessionIndex, selPort, gateIndex, ref scActive[i]);
error_code |= GetGateDAQ.ScCounter(sessionIndex, selPort, gateIndex, ref scCount[i]);
}
if (error_code != 0)
{
return(error_code);
}
//赋值
for (int i = 0; i < batchSessionsInfo.Count; i++)
{
uint port = (uint)batchSessionsInfo[i].port;
uint seIndex = (uint)batchSessionsInfo[i].sessionIndex;
//第二种情况||batchSessionsInfo[i].sessionIndex ！= sessionIndex
//if (batchSessionsInfo[i].sessionIndex == sessionIndex && port != selPort )//以selPort号为依据配置同一块板卡的其他虚拟通道的参数
{
error_code = SetAscanVideoDAQ.Delay(seIndex, port, delay);
error_code |= SetAscanVideoDAQ.Range(seIndex, port, range);
error_code |= SetReceiverDAQ.AnalogGain(seIndex, port, gain);
error_code |= SetAscanVideoDAQ.EnvlopDecayFactor(seIndex, port, envlopDecay);
isSetPre = SetAscanVideoDAQ.WaveMode(seIndex, port, waveMode);
error_code |= SetPulserTransmitDAQ.RecieverMode(seIndex, port, type);
error_code |= SetAscanVideoDAQ.EnvlopActive(seIndex, port, envelopActive);
for (int j = 0; j < gateTol; j++)
{
GateType gateIndex = (GateType)j;
isSetPre |= SetGateDAQ.setTofMode(seIndex, port, gateIndex, tofModeArr[j]);
error_code |= SetGateDAQ.AlarmLogic(seIndex, port, gateIndex, gateAlarmLogic[j]);
error_code |= SetGateDAQ.AlarmActive(seIndex, port, gateIndex, gateAlarmActive[j]);
error_code |= SetGateDAQ.Delay(seIndex, port, gateIndex, gateDelay[j]);
error_code |= SetGateDAQ.Width(seIndex, port, gateIndex, gateWidth[j]);
error_code |= SetGateDAQ.Threshold(seIndex, port, gateIndex, threshold[j]);
error_code |= SetGateDAQ.ScActive(seIndex, port, gateIndex, scActive[j]);
error_code |= SetGateDAQ.ScCounter(seIndex, port, gateIndex, scCount[j]);
if (error_code != 0)
{
return(error_code);
}
}
error_code |= GetGateDAQ.TofMode(seIndex, port, GateType.I, ref tofMode);
if (ifActive == IFActive.ON && ascanIfActive == AscanIFActive.ON)
{
if (tofMode != TofMode.Flank)
{
MessageShow.show("Warning:" + seIndex + port + "The TOF Mode GateI must select Flank mode!",
"警告：" + sessionIndex + port + "门模式门I未选择Flank模式!");
return(error_code = -1);
}
else
{
error_code |= SetGateDAQ.iFActive(seIndex, port, GateType.I, IFActive.ON);
error_code |= SetAscanVideoDAQ.IFActive(seIndex, port, AscanIFActive.ON);
}
}
else
{
error_code |= SetGateDAQ.iFActive(seIndex, port, GateType.I, IFActive.OFF);
error_code |= SetAscanVideoDAQ.IFActive(seIndex, port, AscanIFActive.OFF);
}
if (error_code != 0)
{
return(error_code);
}
}
}
return(error_code);
}