Operation IParser.Parse(string[] lines)
{
Operation operation = new Operation();
OperationResource last = new OperationResource();
lines = Utilities.Trim(lines);
CurrentSection section = CurrentSection.AHeader;
bool keywordsOnly = true;
for (int i = 0; i < lines.Length; i++)
{
try
{
string line = lines[i];
if (line.Length == 0)
{
continue;
}
if (GetSection(line.Trim(), ref section, ref keywordsOnly))
{
continue;
}
string msg = line;
string prefix = "";
// Make the keyword check - or not (depends on the section we are in; see above)
if (keywordsOnly)
{
string keyword;
if (!ParserUtility.StartsWithKeyword(line, Keywords, out keyword))
{
continue;
}
int x = line.IndexOf(':');
if (x == -1)
{
// If there is no colon found (may happen occasionally) then simply remove the length of the keyword from the beginning
prefix = keyword;
msg = line.Remove(0, prefix.Length).Trim();
}
else
{
prefix = line.Substring(0, x);
msg = line.Substring(x + 1).Trim();
}
prefix = prefix.Trim().ToUpperInvariant();
}
// Parse each section
switch (section)
{
case CurrentSection.AHeader:
{
switch (prefix)
{
case "ABSENDER":
operation.CustomData["Absender"] = msg;
break;
case "EINSATZNUMMER":
operation.OperationNumber = ParserUtility.GetTextBetween(msg, null, "Alarmzeit:");
string timestamp = ParserUtility.GetTextBetween(msg, "Alarmzeit:");
operation.Timestamp = ParserUtility.ReadFaxTimestamp(timestamp, DateTime.Now);
break;
}
}
break;
case CurrentSection.BMitteiler:
{
// This switch would not be necessary in this section (there is only "Name")...
switch (prefix)
{
case "NAME":
operation.Messenger = msg;
break;
case "TELEFON":
operation.Messenger = string.Format("{0} Telefon: {1}", operation.Messenger, msg);
break;
}
}
break;
case CurrentSection.CEinsatzort:
{
switch (prefix)
{
case "STRAßE":
{
string street, streetNumber, appendix;
ParserUtility.AnalyzeStreetLine(msg, out street, out streetNumber, out appendix);
operation.CustomData["Einsatzort Zusatz"] = appendix;
operation.Einsatzort.Street = street;
operation.Einsatzort.StreetNumber = streetNumber;
}
break;
case "ABSCHNITT":
operation.CustomData["Einsatzort Abschnitt"] = msg;
break;
case "ORT":
{
operation.Einsatzort.ZipCode = ParserUtility.ReadZipCodeFromCity(msg);
if (string.IsNullOrWhiteSpace(operation.Einsatzort.ZipCode))
{
Logger.Instance.LogFormat(LogType.Warning, this, "Could not find a zip code for city '{0}'. Route planning may fail or yield wrong results!", operation.Einsatzort.City);
}
operation.Einsatzort.City = msg.Remove(0, operation.Einsatzort.ZipCode.Length).Trim();
// The City-text often contains a dash after which the administrative city appears multiple times (like "City A - City A City A").
// However we can (at least with google maps) omit this information without problems!
int dashIndex = operation.Einsatzort.City.IndexOf(" - ");
if (dashIndex != -1)
{
// Ignore everything after the dash
operation.Einsatzort.City = operation.Einsatzort.City.Substring(0, dashIndex).Trim();
}
}
break;
case "OBJEKT":
operation.Einsatzort.Property = msg;
break;
case "KREUZUNG":
operation.Einsatzort.Intersection = msg;
break;
case "STATION":
operation.CustomData["Einsatzort Station"] = ParserUtility.GetTextBetween(msg, null, "Objektnummer");
operation.OperationPlan = ParserUtility.GetMessageText(ParserUtility.GetTextBetween(msg, "Objektnummer"), "");
break;
}
}
break;
case CurrentSection.DEinsatzgrund:
{
switch (prefix)
{
case "SCHLAGWORT.":
operation.Keywords.Keyword = msg;
break;
case "- BRAND":
operation.Keywords.B = msg;
break;
case "- RETTUNGSDIENST":
operation.Keywords.R = msg;
break;
case "- SONSTIGES":
operation.Keywords.S = msg;
break;
case "- THL":
operation.Keywords.T = msg;
break;
case "- INFO":
operation.CustomData["Stichwort I"] = msg;
break;
}
}
break;
case CurrentSection.EEinsatzmittel:
{
switch (prefix)
{
case "EINSATZMITTELNAME":
last.FullName = msg;
break;
case "GEF. GERÄTE":
last.RequestedEquipment.Add(msg);
operation.Resources.Add(last);
last = new OperationResource();
break;
}
}
break;
case CurrentSection.FBemerkung:
{
// Append with newline at the end in case that the message spans more than one line
operation.Comment = operation.Comment.AppendLine(msg);
}
break;
case CurrentSection.GFooter:
// The footer can be ignored completely.
break;
}
}
catch (Exception ex)
{
Logger.Instance.LogFormat(LogType.Warning, this, "Error while parsing line '{0}'. The error message was: {1}", i, ex.Message);
}
}
return(operation);
}
Operation IParser.Parse(string[] lines)
{
Operation operation = new Operation();
OperationResource last = new OperationResource();
lines = Utilities.Trim(lines);
CurrentSection section = CurrentSection.AHeader;
bool keywordsOnly = true;
InnerSection innerSection = InnerSection.AStraße;
for (int i = 0; i < lines.Length; i++)
{
try
{
string line = lines[i];
if (line.Length == 0)
{
continue;
}
// Try to parse the header and extract date and time if possible
operation.Timestamp = ParserUtility.ReadFaxTimestamp(line, operation.Timestamp);
if (GetSection(line.Trim(), ref section, ref keywordsOnly))
{
continue;
}
string msg = line;
string prefix = "";
// Make the keyword check - or not (depends on the section we are in; see above)
if (keywordsOnly)
{
string keyword;
if (!ParserUtility.StartsWithKeyword(line, Keywords, out keyword))
{
continue;
}
int x = line.IndexOf(':');
if (x == -1)
{
// If there is no colon found (may happen occasionally) then simply remove the length of the keyword from the beginning
prefix = keyword;
msg = line.Remove(0, prefix.Length).Trim();
}
else
{
prefix = line.Substring(0, x);
msg = line.Substring(x + 1).Trim();
}
prefix = prefix.Trim().ToUpperInvariant();
}
// Parse each section
switch (section)
{
case CurrentSection.AHeader:
{
switch (prefix)
{
case "ALARM":
operation.Timestamp = ParserUtility.ReadFaxTimestamp(msg, DateTime.Now);
break;
case "EINSATZNUMMER":
operation.OperationNumber = msg;
break;
}
}
break;
case CurrentSection.BMitteiler:
{
// This switch would not be necessary in this section (there is only "Name")...
switch (prefix)
{
case "NAME":
operation.Messenger = msg;
break;
case "RUFNUMMER":
if (operation.Messenger != null)
{
operation.Messenger += " " + msg;
}
break;
}
}
break;
case CurrentSection.CEinsatzort:
{
switch (prefix)
{
case "STRAßE":
{
innerSection = InnerSection.AStraße;
string street, streetNumber, appendix;
ParserUtility.AnalyzeStreetLine(msg, out street, out streetNumber, out appendix);
operation.CustomData["Einsatzort Zusatz"] = appendix;
operation.Einsatzort.Street = street;
operation.Einsatzort.StreetNumber = streetNumber;
}
break;
case "ABSCHNITT":
operation.Einsatzort.Intersection = msg;
break;
case "ORT":
{
innerSection = InnerSection.BOrt;
operation.Einsatzort.ZipCode = ParserUtility.ReadZipCodeFromCity(msg);
if (string.IsNullOrWhiteSpace(operation.Einsatzort.ZipCode))
{
Logger.Instance.LogFormat(LogType.Warning, this, "Could not find a zip code for city '{0}'. Route planning may fail or yield wrong results!", operation.Einsatzort.City);
}
operation.Einsatzort.City = msg.Remove(0, operation.Einsatzort.ZipCode.Length).Trim();
// The City-text often contains a dash after which the administrative city appears multiple times (like "City A - City A City A").
// However we can (at least with google maps) omit this information without problems!
int dashIndex = operation.Einsatzort.City.IndexOf(" - ");
if (dashIndex != -1)
{
// Ignore everything after the dash
operation.Einsatzort.City = operation.Einsatzort.City.Substring(0, dashIndex).Trim();
}
}
break;
case "OBJEKT":
innerSection = InnerSection.CObjekt;
operation.Einsatzort.Property = msg;
break;
case "EINSATZPLANNUMMER":
operation.OperationPlan = msg;
break;
case "STATION":
innerSection = InnerSection.DStation;
operation.CustomData["Einsatzort Station"] = msg;
break;
default:
switch (innerSection)
{
case InnerSection.AStraße:
//Quite dirty because of Streetnumber. Looking for better solution
operation.Einsatzort.Street += msg;
break;
case InnerSection.BOrt:
operation.Einsatzort.City += msg;
break;
case InnerSection.CObjekt:
operation.Einsatzort.Property += msg;
break;
case InnerSection.DStation:
operation.CustomData["Einsatzort Station"] += msg;
break;
}
break;
}
}
break;
case CurrentSection.DZielort:
{
switch (prefix)
{
case "STRAßE":
{
innerSection = InnerSection.AStraße;
string street, streetNumber, appendix;
ParserUtility.AnalyzeStreetLine(msg, out street, out streetNumber, out appendix);
operation.CustomData["Zielort Zusatz"] = appendix;
operation.Zielort.Street = street;
operation.Zielort.StreetNumber = streetNumber;
}
break;
case "ORT":
{
innerSection = InnerSection.BOrt;
operation.Zielort.ZipCode = ParserUtility.ReadZipCodeFromCity(msg);
if (string.IsNullOrWhiteSpace(operation.Zielort.ZipCode))
{
Logger.Instance.LogFormat(LogType.Warning, this, "Could not find a zip code for city '{0}'. Route planning may fail or yield wrong results!", operation.Zielort.City);
}
operation.Zielort.City = msg.Remove(0, operation.Zielort.ZipCode.Length).Trim();
}
break;
case "OBJEKT":
innerSection = InnerSection.CObjekt;
operation.Zielort.Property = msg;
break;
case "STATION":
innerSection = InnerSection.DStation;
operation.CustomData["Zielort Station"] = msg;
break;
default:
switch (innerSection)
{
case InnerSection.AStraße:
//Quite dirty because of Streetnumber. Looking for better solution
operation.Zielort.Street += msg;
break;
case InnerSection.BOrt:
operation.Zielort.City += msg;
break;
case InnerSection.CObjekt:
operation.Zielort.Property += msg;
break;
case InnerSection.DStation:
operation.CustomData["Zielort Station"] += msg;
break;
}
break;
}
}
break;
case CurrentSection.EEinsatzgrund:
{
switch (prefix)
{
case "SCHLAGW.":
operation.Keywords.Keyword = msg;
break;
case "STICHWORT":
operation.Keywords.EmergencyKeyword = msg;
break;
}
}
break;
case CurrentSection.FEinsatzmittel:
{
switch (prefix)
{
case "NAME":
last.FullName = msg.Trim();
break;
case "GEF. GERÄTE":
// Only add to requested equipment if there is some text,
// otherwise the whole vehicle is the requested equipment
if (!string.IsNullOrWhiteSpace(msg))
{
last.RequestedEquipment.Add(msg);
}
break;
case "ALARMIERT":
// Only add to requested equipment if there is some text,
// otherwise the whole vehicle is the requested equipment
if (!string.IsNullOrWhiteSpace(msg))
{
last.Timestamp = msg;
}
operation.Resources.Add(last);
last = new OperationResource();
break;
}
}
break;
case CurrentSection.GBemerkung:
{
// Append with newline at the end in case that the message spans more than one line
operation.Comment = operation.Comment.AppendLine(msg);
}
break;
case CurrentSection.HFooter:
// The footer can be ignored completely.
break;
}
}
catch (Exception ex)
{
Logger.Instance.LogFormat(LogType.Warning, this, "Error while parsing line '{0}'. The error message was: {1}", i, ex.Message);
}
}
return(operation);
}
Operation IParser.Parse(string[] lines)
{
Operation operation = new Operation();
OperationResource last = new OperationResource();
lines = Utilities.Trim(lines);
CurrentSection section = CurrentSection.AHeader;
bool keywordsOnly = true;
InnerSection innerSection = InnerSection.AStraße;
for (int i = 0; i < lines.Length; i++)
{
try
{
string line = lines[i];
if (line.Length == 0)
{
continue;
}
// Try to parse the header and extract date and time if possible
operation.Timestamp = ParserUtility.ReadFaxTimestamp(line, operation.Timestamp);
if (GetSection(line.Trim(), ref section, ref keywordsOnly))
{
continue;
}
string msg = line;
string prefix = "";
// Make the keyword check - or not (depends on the section we are in; see above)
if (keywordsOnly)
{
string keyword;
if (!ParserUtility.StartsWithKeyword(line, Keywords, out keyword))
{
continue;
}
int x = line.IndexOf(':');
if (x == -1)
{
// If there is no colon found (may happen occasionally) then simply remove the length of the keyword from the beginning
prefix = keyword;
msg = line.Remove(0, prefix.Length).Trim();
}
else
{
prefix = line.Substring(0, x);
msg = line.Substring(x + 1).Trim();
}
prefix = prefix.Trim().ToUpperInvariant();
}
// Parse each section
switch (section)
{
case CurrentSection.AHeader:
{
switch (prefix)
{
case "ABSENDER":
operation.CustomData["Absender"] = msg;
break;
case "TERMIN":
operation.CustomData["Termin"] = msg;
break;
case "EINSATZNUMMER":
operation.OperationNumber = msg;
break;
case "BMA MELDER":
operation.CustomData["BMA Melder"] = msg;
break;
}
}
break;
case CurrentSection.BMitteiler:
{
// This switch would not be necessary in this section (there is only "Name")...
switch (prefix)
{
case "NAME":
operation.Messenger = msg;
break;
}
}
break;
case CurrentSection.CEinsatzort:
{
switch (prefix)
{
case "STRAßE":
{
innerSection = InnerSection.AStraße;
string street, streetNumber, appendix;
ParserUtility.AnalyzeStreetLine(msg, out street, out streetNumber, out appendix);
operation.CustomData["Einsatzort Zusatz"] = appendix;
operation.Einsatzort.Street = street;
operation.Einsatzort.StreetNumber = streetNumber;
}
break;
case "STR.ABSCHN":
innerSection = InnerSection.BAbschnitt;
operation.CustomData["Einsatzort Straße Abschnitt"] = msg;
break;
case "ORT":
{
innerSection = InnerSection.COrt;
operation.Einsatzort.ZipCode = ParserUtility.ReadZipCodeFromCity(msg);
if (string.IsNullOrWhiteSpace(operation.Einsatzort.ZipCode))
{
Logger.Instance.LogFormat(LogType.Warning, this, "Could not find a zip code for city '{0}'. Route planning may fail or yield wrong results!", operation.Einsatzort.City);
}
operation.Einsatzort.City = msg.Remove(0, operation.Einsatzort.ZipCode.Length).Trim();
// The City-text often contains a dash after which the administrative city appears multiple times (like "City A - City A City A").
// However we can (at least with google maps) omit this information without problems!
int dashIndex = operation.Einsatzort.City.IndexOf(" - ");
if (dashIndex != -1)
{
// Ignore everything after the dash
operation.Einsatzort.City = operation.Einsatzort.City.Substring(0, dashIndex).Trim();
}
}
break;
case "OBJEKT":
innerSection = InnerSection.DObjekt;
operation.Einsatzort.Property = msg;
break;
case "STATION":
innerSection = InnerSection.EStation;
operation.CustomData["Einsatzort Station"] = msg;
break;
default:
switch (innerSection)
{
case InnerSection.AStraße:
//Quite dirty because of Streetnumber. Looking for better solution
operation.Einsatzort.Street += msg;
break;
case InnerSection.BAbschnitt:
operation.CustomData["Einsatzort Straße Abschnitt"] += msg;
break;
case InnerSection.COrt:
operation.Einsatzort.City += msg;
break;
case InnerSection.DObjekt:
operation.Einsatzort.Property += msg;
break;
case InnerSection.EStation:
operation.CustomData["Einsatzort Station"] += msg;
break;
}
break;
}
}
break;
case CurrentSection.EEinsatzgrund:
{
switch (prefix)
{
case "SCHLAGW.":
operation.Keywords.Keyword = msg;
break;
case "STICHWORT B":
operation.Keywords.B = msg;
break;
case "STICHWORT T":
operation.Keywords.T = msg;
break;
case "STICHWORT S":
operation.Keywords.S = msg;
break;
case "STICHWORT R":
operation.Keywords.R = msg;
break;
}
}
break;
case CurrentSection.FEinsatzmittel:
{
if (line.StartsWith("NAME", StringComparison.CurrentCultureIgnoreCase))
{
msg = ParserUtility.GetMessageText(line, "NAME");
last.FullName = msg.Trim();
}
else if (line.StartsWith("GEF. GERÄT", StringComparison.CurrentCultureIgnoreCase))
{
msg = ParserUtility.GetMessageText(line, "GEF. GERÄT");
// Only add to requested equipment if there is some text,
// otherwise the whole vehicle is the requested equipment
if (!string.IsNullOrWhiteSpace(msg))
{
last.RequestedEquipment.Add(msg);
}
}
else if (line.StartsWith("ALARMIERT", StringComparison.CurrentCultureIgnoreCase))
{
msg = ParserUtility.GetMessageText(line, "Alarmiert");
// In case that parsing the time failed, we just assume that the resource got requested right away.
DateTime dt;
// Most of the time the OCR-software reads the colon as a "1", so we check this case right here.
if (!DateTime.TryParseExact(msg, "dd.MM.yyyy HH1mm", CultureInfo.InvariantCulture, DateTimeStyles.None, out dt))
{
// If this is NOT the case and it was parsed correctly, try it here
DateTime.TryParseExact(msg, "dd.MM.yyyy HH:mm", CultureInfo.InvariantCulture, DateTimeStyles.None, out dt);
}
last.Timestamp = dt.ToString("dd.MM.yyyy HH:mm");
// This line will end the construction of this resource. Add it to the list and go to the next.
operation.Resources.Add(last);
last = new OperationResource();
}
}
break;
case CurrentSection.GBemerkung:
{
// Append with newline at the end in case that the message spans more than one line
operation.Comment = operation.Comment.AppendLine(msg);
}
break;
case CurrentSection.HFooter:
// The footer can be ignored completely.
break;
}
}
catch (Exception ex)
{
Logger.Instance.LogFormat(LogType.Warning, this, "Error while parsing line '{0}'. The error message was: {1}", i, ex.Message);
}
}
return(operation);
}
Operation IParser.Parse(string[] lines)
{
Operation operation = new Operation();
OperationResource last = new OperationResource();
lines = Utilities.Trim(lines);
bool keywordsOnly = true;
CurrentSection section = CurrentSection.AHeader;
for (int i = 0; i < lines.Length; i++)
{
try
{
string line = lines[i];
if (line.Length == 0)
{
continue;
}
if (GetSection(line.Trim(), ref section, ref keywordsOnly))
{
continue;
}
string msg = line;
string prefix = "";
// Make the keyword check - or not (depends on the section we are in; see above)
if (keywordsOnly)
{
string keyword;
if (!ParserUtility.StartsWithKeyword(line, Keywords, out keyword))
{
continue;
}
int x = line.IndexOf(':');
if (x == -1)
{
// If there is no colon found (may happen occasionally) then simply remove the length of the keyword from the beginning
prefix = keyword;
msg = line.Remove(0, prefix.Length).Trim();
}
else
{
prefix = line.Substring(0, x);
msg = line.Substring(x + 1).Trim();
}
prefix = prefix.Trim().ToUpperInvariant();
}
// Parse each section
switch (section)
{
case CurrentSection.AHeader:
{
switch (prefix)
{
case "ABSENDER":
operation.CustomData["Absender"] = msg;
break;
case "TERMIN":
operation.CustomData["Termin"] = msg;
break;
case "EINSATZNUMMER":
// Try to parse the header and extract date and time if possible
operation.Timestamp = ParserUtility.ReadFaxTimestamp(line, operation.Timestamp);
if (msg.ToUpperInvariant().Contains("ALARMZEIT"))
{
msg = msg.Substring(0, msg.ToUpperInvariant().IndexOf("ALARMZEIT")).Trim();
}
operation.OperationNumber = msg;
break;
}
}
break;
case CurrentSection.BMitteiler:
{
// This switch would not be necessary in this section (there is only "Name")...
switch (prefix)
{
case "NAME":
operation.Messenger = msg;
break;
}
}
break;
case CurrentSection.CEinsatzort:
{
switch (prefix)
{
case "STRAßE":
{
string street, streetNumber, appendix;
ParserUtility.AnalyzeStreetLine(msg, out street, out streetNumber, out appendix);
operation.CustomData["Einsatzort Zusatz"] = appendix;
operation.Einsatzort.Street = street;
operation.Einsatzort.StreetNumber = streetNumber;
}
break;
case "ABSCHNITT":
break;
case "ORT":
{
operation.Einsatzort.ZipCode = ParserUtility.ReadZipCodeFromCity(msg);
if (string.IsNullOrWhiteSpace(operation.Einsatzort.ZipCode))
{
Logger.Instance.LogFormat(LogType.Warning, this, "Could not find a zip code for city '{0}'. Route planning may fail or yield wrong results!", operation.Einsatzort.City);
}
operation.Einsatzort.City = msg.Remove(0, operation.Einsatzort.ZipCode.Length).Trim();
// The City-text often contains a dash after which the administrative city appears multiple times (like "City A - City A City A").
// However we can (at least with google maps) omit this information without problems!
int dashIndex = operation.Einsatzort.City.IndexOf('-');
if (dashIndex != -1)
{
// Ignore everything after the dash
operation.Einsatzort.City = operation.Einsatzort.City.Substring(0, dashIndex).Trim();
}
}
break;
case "OBJEKT":
operation.Einsatzort.Property = msg;
break;
case "KREUZUNG":
operation.Einsatzort.Intersection = msg;
break;
case "STATION":
operation.CustomData["Einsatzort Station"] = msg;
break;
}
}
break;
case CurrentSection.EEinsatzgrund:
{
switch (prefix)
{
case "SCHLAGW.":
operation.Keywords.Keyword = msg;
break;
case "STICHWORT B":
operation.Keywords.B = ParserUtility.GetTextBetween(msg, null, "STICHWORT RD:");
operation.Keywords.R = ParserUtility.GetTextBetween(msg, "STICHWORT RD:");
break;
case "STICHWORT SO":
operation.Keywords.S = ParserUtility.GetTextBetween(msg, null, "STICHWORT TH:");
operation.Keywords.T = ParserUtility.GetTextBetween(msg, "STICHWORT TH:", "STICHWORT IN:");
operation.CustomData["Stichwort IN"] = ParserUtility.GetTextBetween(msg, "STICHWORT IN:");
break;
case "PRIO.":
operation.Priority = msg;
break;
}
}
break;
case CurrentSection.FEinsatzmittel:
{
switch (prefix)
{
case "EINSATZMITTELNAME":
last.FullName = msg.Trim();
break;
case "GEF. GERÄTE":
// Only add to requested equipment if there is some text,
// otherwise the whole vehicle is the requested equipment
if (!string.IsNullOrWhiteSpace(msg))
{
last.RequestedEquipment.Add(msg);
}
// This line will end the construction of this resource. Add it to the list and go to the next.
operation.Resources.Add(last);
last = new OperationResource();
break;
}
}
break;
case CurrentSection.GBemerkung:
{
// Append with newline at the end in case that the message spans more than one line
operation.Comment = operation.Comment += msg + "\n";
}
break;
case CurrentSection.HFooter:
// The footer can be ignored completely.
break;
}
}
catch (Exception ex)
{
Logger.Instance.LogFormat(LogType.Warning, this, "Error while parsing line '{0}'. The error message was: {1}", i, ex.Message);
}
}
// Post-processing the operation if needed
if (!string.IsNullOrWhiteSpace(operation.Comment) && operation.Comment.EndsWith("\n"))
{
operation.Comment = operation.Comment.Substring(0, operation.Comment.Length - 1).Trim();
}
return(operation);
}
Operation IParser.Parse(string[] lines)
{
Operation operation = new Operation();
lines = Utilities.Trim(lines);
CurrentSection section = CurrentSection.AHeader;
bool keywordsOnly = true;
for (int i = 0; i < lines.Length; i++)
{
try
{
string line = lines[i];
if (line.Length == 0)
{
continue;
}
// Try to parse the header and extract date and time if possible
operation.Timestamp = ReadFaxTimestamp(line, operation.Timestamp);
if (GetSection(line.Trim(), ref section, ref keywordsOnly))
{
continue;
}
string msg = line;
string prefix = "";
// Make the keyword check - or not (depends on the section we are in; see above)
if (keywordsOnly)
{
string keyword;
if (!StartsWithKeyword(line, out keyword))
{
continue;
}
int x = line.IndexOf(':');
if (x == -1)
{
// If there is no colon found (may happen occasionally) then simply remove the length of the keyword from the beginning
prefix = keyword;
msg = line.Remove(0, prefix.Length).Trim();
}
else
{
prefix = line.Substring(0, x);
msg = line.Substring(x + 1).Trim();
}
prefix = prefix.Trim().ToUpperInvariant();
}
// Parse each section
switch (section)
{
case CurrentSection.AHeader:
{
switch (prefix)
{
case "ABSENDER":
operation.CustomData["Absender"] = msg.Substring(0, msg.IndexOf("ALARMZEIT", StringComparison.InvariantCultureIgnoreCase));
String dateString = msg.Substring(msg.IndexOf("ALARMZEIT", StringComparison.InvariantCultureIgnoreCase)).Trim().Remove(0, "ALARMZEIT".Length + 1).Trim();
DateTime time = DateTime.Now;
DateTime.TryParse(dateString, out time);
operation.Timestamp = time;
break;
case "TERMIN":
operation.CustomData["Termin"] = msg;
break;
case "EINSATZNUMMER":
operation.OperationNumber = msg;
break;
}
}
break;
case CurrentSection.BMitteiler:
{
// This switch would not be necessary in this section (there is only "Name")...
switch (prefix)
{
case "NAME":
operation.Messenger = msg;
break;
}
}
break;
case CurrentSection.CEinsatzort:
{
switch (prefix)
{
case "STRAßE":
{
string street, streetNumber, appendix;
ParserUtility.AnalyzeStreetLine(msg, out street, out streetNumber, out appendix);
operation.CustomData["Einsatzort Zusatz"] = appendix;
operation.Einsatzort.Street = street;
operation.Einsatzort.StreetNumber = streetNumber;
}
break;
case "ORT":
{
operation.Einsatzort.ZipCode = ParserUtility.ReadZipCodeFromCity(msg);
if (string.IsNullOrWhiteSpace(operation.Einsatzort.ZipCode))
{
Logger.Instance.LogFormat(LogType.Warning, this, "Could not find a zip code for city '{0}'. Route planning may fail or yield wrong results!", operation.Einsatzort.City);
}
operation.Einsatzort.City = msg.Remove(0, operation.Einsatzort.ZipCode.Length).Trim();
// The City-text often contains a dash after which the administrative city appears multiple times (like "City A - City A City A").
// However we can (at least with google maps) omit this information without problems!
int dashIndex = operation.Einsatzort.City.IndexOf(" - ");
if (dashIndex != -1)
{
// Ignore everything after the dash
operation.Einsatzort.City = operation.Einsatzort.City.Substring(0, dashIndex).Trim();
}
}
break;
case "ABSCHNITT":
case "KREUZUNG":
operation.Einsatzort.Intersection += msg;
break;
case "OBJEKT":
operation.Einsatzort.Property = msg;
break;
case "STATION":
operation.CustomData["Einsatzort Station"] = msg;
break;
case "KOORDINATE":
Regex r = new Regex(@"[\d\.]+");
var matches = r.Matches(line);
if (matches.Count == 2)
{
int geoRechts = Convert.ToInt32(matches[0].Value);
int geoHoch = Convert.ToInt32(matches[1].Value);
var geo = GeographicCoords.FromGaussKrueger(geoRechts, geoHoch);
operation.Einsatzort.GeoLatitude = geo.Latitude;
operation.Einsatzort.GeoLongitude = geo.Longitude;
}
break;
case "ABTEILUNG":
case "ZUSTÄNDIGE ILS":
//These fields are currently unassigned. If required this can be done.
break;
}
}
break;
case CurrentSection.DZielort:
{
switch (prefix)
{
case "STRAßE":
{
string street, streetNumber, appendix;
ParserUtility.AnalyzeStreetLine(msg, out street, out streetNumber, out appendix);
operation.CustomData["Zielort Zusatz"] = appendix;
operation.Zielort.Street = street;
operation.Zielort.StreetNumber = streetNumber;
}
break;
case "ORT":
{
string plz = ParserUtility.ReadZipCodeFromCity(msg);
operation.Zielort.ZipCode = plz;
operation.Zielort.City = msg.Remove(0, plz.Length).Trim();
}
break;
case "OBJEKT":
operation.Zielort.Property = msg;
break;
case "STATION":
operation.CustomData["Zielort Station"] = msg;
break;
}
}
break;
case CurrentSection.EEinsatzgrund:
{
switch (prefix)
{
case "SCHLAGWORT":
operation.Keywords.Keyword = msg.Substring(0, msg.IndexOf("STICHWORT", StringComparison.InvariantCultureIgnoreCase));
operation.Keywords.EmergencyKeyword = msg.Substring(msg.IndexOf("STICHWORT", StringComparison.InvariantCultureIgnoreCase)).Trim().Remove(0, "STICHWORT".Length + 1).Trim();
break;
case "PRIO.":
operation.Priority = msg;
break;
}
}
break;
case CurrentSection.FEinsatzmittel:
{
if (line.StartsWith("NAME", StringComparison.CurrentCultureIgnoreCase))
{
//Thats the line "Name : Alarmiert : Aus : AN". Should be ignored.
}
else
{
operation.Resources.Add(new OperationResource {
FullName = msg.Replace(':', ' ').Trim()
});
}
}
break;
case CurrentSection.Objektinfo:
operation.CustomData["Objektinfo"] += line;
break;
case CurrentSection.GBemerkung:
{
operation.Comment = operation.Comment.AppendLine(msg);
}
break;
case CurrentSection.HFooter:
// The footer can be ignored completely.
break;
}
}
catch (Exception ex)
{
Logger.Instance.LogFormat(LogType.Warning, this, "Error while parsing line '{0}'. The error message was: {1}", i, ex.Message);
}
}
return(operation);
}
Operation IParser.Parse(string[] lines)
{
Operation operation = new Operation();
OperationResource last = new OperationResource();
lines = Utilities.Trim(lines);
CurrentSection section = CurrentSection.AHeader;
bool keywordsOnly = true;
NumberFormatInfo nfi = new NumberFormatInfo {
NumberDecimalSeparator = "."
};
for (int i = 0; i < lines.Length; i++)
{
try
{
string line = lines[i];
if (line.Length == 0)
{
continue;
}
// Try to parse the header and extract date and time if possible
operation.Timestamp = ParserUtility.ReadFaxTimestamp(line, operation.Timestamp);
if (GetSection(line.Trim(), ref section, ref keywordsOnly))
{
continue;
}
string msg = line;
string prefix = "";
// Make the keyword check - or not (depends on the section we are in; see above)
if (keywordsOnly)
{
string keyword;
if (!ParserUtility.StartsWithKeyword(line, Keywords, out keyword))
{
continue;
}
int x = line.IndexOf(':');
if (x == -1)
{
// If there is no colon found (may happen occasionally) then simply remove the length of the keyword from the beginning
prefix = keyword;
msg = line.Remove(0, prefix.Length).Trim();
}
else
{
prefix = line.Substring(0, x);
msg = line.Substring(x + 1).Trim();
}
prefix = prefix.Trim().ToUpperInvariant();
}
// Parse each section
switch (section)
{
case CurrentSection.AHeader:
{
switch (prefix)
{
case "ABSENDER":
operation.CustomData["Absender"] = msg;
break;
case "TERMIN":
operation.CustomData["Termin"] = msg;
break;
case "EINSATZN.":
operation.OperationNumber = msg;
break;
}
}
break;
case CurrentSection.BMitteiler:
{
// This switch would not be necessary in this section (there is only "Name")...
switch (prefix)
{
case "NAME":
operation.Messenger = msg;
break;
}
}
break;
case CurrentSection.CEinsatzort:
{
switch (prefix)
{
case "STRAßE":
{
operation.Einsatzort.Street = msg;
}
break;
case "HAUS-NR.":
{
operation.Einsatzort.StreetNumber = msg;
}
break;
case "ABSCHNITT":
{
operation.Einsatzort.Intersection = msg;
}
break;
case "ORTSTEIL":
{
operation.CustomData["Einsatzort Ortsteil"] = msg;
}
break;
case "ORT":
{
operation.Einsatzort.ZipCode = ParserUtility.ReadZipCodeFromCity(msg);
if (string.IsNullOrWhiteSpace(operation.Einsatzort.ZipCode))
{
Logger.Instance.LogFormat(LogType.Warning, this, "Could not find a zip code for city '{0}'. Route planning may fail or yield wrong results!", operation.Einsatzort.City);
}
operation.Einsatzort.City = msg.Remove(0, operation.Einsatzort.ZipCode.Length).Trim();
// The City-text often contains a dash after which the administrative city appears multiple times (like "City A - City A City A").
// However we can (at least with google maps) omit this information without problems!
int dashIndex = operation.Einsatzort.City.IndexOf(" - ");
if (dashIndex != -1)
{
// Ignore everything after the dash
operation.Einsatzort.City = operation.Einsatzort.City.Substring(0, dashIndex).Trim();
}
}
break;
case "KOORDINATE":
Regex r = new Regex(@"\d+");
var matches = r.Matches(line);
if (matches.Count > 2)
{
int rechts = Convert.ToInt32(matches[0].Value);
int hoch = Convert.ToInt32(matches[1].Value);
GaussKrueger gauss = new GaussKrueger(rechts, hoch);
Geographic geo = (Geographic)gauss;
operation.Einsatzort.GeoLatitude = geo.Latitude;
operation.Einsatzort.GeoLongitude = geo.Longitude;
}
break;
case "OBJEKT":
operation.Einsatzort.Property = msg;
break;
case "EINSATZPLAN":
operation.OperationPlan = msg;
break;
case "STATION":
operation.CustomData["Einsatzort Station"] = msg;
break;
case "SCHLAGWORT":
operation.Keywords.Keyword = msg;
break;
case "STICHWORT B":
operation.Keywords.B = msg;
break;
case "STICHWORT T":
operation.Keywords.T = msg;
break;
case "STICHWORT S":
operation.Keywords.S = msg;
break;
case "STICHWORT I":
operation.CustomData["Stichwort I"] = msg;
break;
case "STICHWORT R":
operation.Keywords.R = msg;
break;
}
}
break;
case CurrentSection.FEinsatzmittel:
{
switch (prefix)
{
case "NAME":
last.FullName = msg.Trim();
break;
case "AUSSTATTUNG":
// Only add to requested equipment if there is some text,
// otherwise the whole vehicle is the requested equipment
if (!string.IsNullOrWhiteSpace(msg))
{
last.RequestedEquipment.Add(msg);
}
// This line will end the construction of this resource. Add it to the list and go to the next.
operation.Resources.Add(last);
last = new OperationResource();
break;
}
}
break;
case CurrentSection.GBemerkung:
{
// Append with newline at the end in case that the message spans more than one line
operation.Comment = operation.Comment.AppendLine(msg);
}
break;
case CurrentSection.HFooter:
// The footer can be ignored completely.
break;
}
}
catch (Exception ex)
{
Logger.Instance.LogFormat(LogType.Warning, this, "Error while parsing line '{0}'. The error message was: {1}", i, ex.Message);
}
}
return(operation);
}
Operation IParser.Parse(string[] lines)
{
Operation operation = new Operation();
OperationResource last = new OperationResource();
lines = Utilities.Trim(lines);
CurrentSection section = CurrentSection.AHeader;
bool keywordsOnly = true;
double geoX = 0, geoY = 0;
NumberFormatInfo nfi = new NumberFormatInfo {
NumberDecimalSeparator = "."
};
for (int i = 0; i < lines.Length; i++)
{
try
{
string line = lines[i];
if (line.Length == 0)
{
continue;
}
if (GetSection(line.Trim(), ref section, ref keywordsOnly))
{
continue;
}
string msg = line;
string prefix = "";
// Make the keyword check - or not (depends on the section we are in; see above)
string keyword = "";
if (keywordsOnly)
{
if (!ParserUtility.StartsWithKeyword(line, _keywords, out keyword))
{
continue;
}
int x = line.IndexOf(':');
if (x == -1)
{
// If there is no colon found (may happen occasionally) then simply remove the length of the keyword from the beginning
prefix = keyword;
msg = line.Remove(0, prefix.Length).Trim();
}
else
{
prefix = line.Substring(0, x);
msg = line.Substring(x + 1).Trim();
}
prefix = prefix.Trim().ToUpperInvariant();
}
// Parse each section
switch (section)
{
case CurrentSection.AHeader:
{
switch (prefix)
{
case "EINSATZNUMMER":
operation.OperationNumber = msg;
break;
}
}
break;
case CurrentSection.CKoordinaten:
switch (prefix)
{
case "X":
geoX = double.Parse(msg, nfi);
break;
case "Y":
geoY = double.Parse(msg, nfi);
var geo = GeographicCoords.FromGaussKrueger(geoX, geoY);
operation.Einsatzort.GeoLatitude = geo.Latitude;
operation.Einsatzort.GeoLongitude = geo.Longitude;
break;
}
break;
case CurrentSection.BMitteiler:
switch (prefix)
{
case "NAME":
operation.Messenger = msg;
break;
case "RUFNUMMER":
operation.Messenger = operation.Messenger.AppendLine(string.Format("Nr.: {0}", msg));
break;
}
break;
case CurrentSection.DEinsatzort:
{
switch (prefix)
{
case "STRAßE":
operation.Einsatzort.Street = msg;
break;
case "HAUS-NR.":
operation.Einsatzort.StreetNumber = msg;
break;
case "ORT":
{
operation.Einsatzort.ZipCode = ParserUtility.ReadZipCodeFromCity(msg);
if (!string.IsNullOrWhiteSpace(operation.Einsatzort.ZipCode))
{
operation.Einsatzort.City = msg.Replace(operation.Einsatzort.ZipCode, "").Trim();
}
else
{
operation.Einsatzort.City = msg;
}
// The City-text often contains a dash after which the administrative city appears multiple times (like "City A - City A City A").
// However we can (at least with google maps) omit this information without problems!
int dashIndex = operation.Einsatzort.City.IndexOf('-');
if (dashIndex != -1)
{
// Ignore everything after the dash
operation.Einsatzort.City = operation.Einsatzort.City.Substring(0, dashIndex);
}
}
break;
case "OBJEKT":
operation.Einsatzort.Property = msg;
break;
case "STATION":
operation.CustomData["Einsatzort Station"] = msg;
break;
}
}
break;
case CurrentSection.EZielort:
{
switch (prefix)
{
case "STRAßE":
operation.Zielort.Street = msg;
break;
case "HAUS-NR.":
operation.Zielort.StreetNumber = msg;
break;
case "ORT":
operation.Zielort.ZipCode = ParserUtility.ReadZipCodeFromCity(msg);
if (!string.IsNullOrWhiteSpace(operation.Zielort.ZipCode))
{
operation.Zielort.City = msg.Replace(operation.Zielort.ZipCode, "").Trim();
}
else
{
operation.Zielort.City = msg;
}
break;
case "OBJEKT":
operation.Zielort.Property = msg;
break;
case "STATION":
operation.CustomData["Zielort Station"] = msg;
break;
}
}
break;
case CurrentSection.FEinsatzgrund:
{
switch (prefix)
{
case "SCHLAGW.":
operation.Keywords.Keyword = msg;
break;
case "STICHWORT":
operation.Keywords.EmergencyKeyword = msg;
break;
}
}
break;
case CurrentSection.HEinsatzmittel:
{
switch (prefix)
{
case "NAME":
last.FullName = msg;
break;
case "GERÄT":
// Only add to requested equipment if there is some text,
// otherwise the whole vehicle is the requested equipment
if (!string.IsNullOrWhiteSpace(msg))
{
last.RequestedEquipment.Add(msg);
}
break;
case "ALARMIERT":
last.Timestamp = ParserUtility.TryGetTimestampFromMessage(msg, DateTime.Now).ToString();
operation.Resources.Add(last);
last = new OperationResource();
break;
}
}
break;
case CurrentSection.GBemerkungen:
{
operation.Picture = operation.Picture.AppendLine(msg);
}
break;
case CurrentSection.ZFooter:
// The footer can be ignored completely.
break;
}
}
catch (Exception ex)
{
Logger.Instance.LogFormat(LogType.Warning, this, "Error while parsing line '{0}'. The error message was: {1}", i, ex.Message);
}
}
return(operation);
}
Operation IParser.Parse(string[] lines)
{
Operation operation = new Operation();
OperationResource last = new OperationResource();
lines = Utilities.Trim(lines);
CurrentSection section = CurrentSection.AHeader;
bool keywordsOnly = true;
for (int i = 0; i < lines.Length; i++)
{
try
{
string line = lines[i];
if (line.Length == 0)
{
continue;
}
if (GetSection(line.Trim(), ref section, ref keywordsOnly))
{
continue;
}
string msg = line;
string prefix = "";
// Make the keyword check - or not (depends on the section we are in; see above)
string keyword = "";
if (keywordsOnly)
{
if (!ParserUtility.StartsWithKeyword(line, _keywords, out keyword))
{
continue;
}
int x = line.IndexOf(':');
if (x == -1)
{
// If there is no colon found (may happen occasionally) then simply remove the length of the keyword from the beginning
prefix = keyword;
msg = line.Remove(0, prefix.Length).Trim();
}
else
{
prefix = line.Substring(0, x);
msg = line.Substring(x + 1).Trim();
}
prefix = prefix.Trim().ToUpperInvariant();
}
// Parse each section
switch (section)
{
case CurrentSection.AHeader:
{
switch (prefix)
{
case "ABSENDER":
operation.CustomData["Absender"] = msg;
break;
case "FAX":
operation.CustomData["Fax"] = msg;
break;
case "TERMIN":
operation.CustomData["Termin"] = msg;
break;
}
}
break;
case CurrentSection.BMitteiler:
operation.Messenger = msg;
break;
case CurrentSection.CEinsatzort:
{
switch (prefix)
{
case "STRAßE":
{
string street, streetNumber, appendix;
ParserUtility.AnalyzeStreetLine(msg, out street, out streetNumber, out appendix);
operation.CustomData["Einsatzort Zusatz"] = appendix;
operation.Einsatzort.Street = street;
operation.Einsatzort.StreetNumber = streetNumber;
}
break;
case "ORT":
{
operation.Einsatzort.ZipCode = ParserUtility.ReadZipCodeFromCity(msg);
if (string.IsNullOrWhiteSpace(operation.Einsatzort.ZipCode))
{
Logger.Instance.LogFormat(LogType.Warning, this, "Could not find a zip code for city '{0}'. Route planning may fail or yield wrong results!", msg);
}
operation.Einsatzort.City = msg.Remove(0, operation.Einsatzort.ZipCode.Length).Trim();
// The City-text often contains a dash after which the administrative city appears multiple times (like "City A - City A City A").
// However we can (at least with google maps) omit this information without problems!
int dashIndex = msg.IndexOf('-');
if (dashIndex != -1)
{
// Ignore everything after the dash
operation.Einsatzort.City = operation.Einsatzort.City.Substring(0, dashIndex);
}
}
break;
case "OBJEKT":
operation.Einsatzort.Property = msg;
break;
case "STATION":
operation.CustomData["Einsatzort Station"] = msg;
break;
}
}
break;
case CurrentSection.DZielort:
{
switch (prefix)
{
case "STRAßE":
{
string street, streetNumber, appendix;
ParserUtility.AnalyzeStreetLine(msg, out street, out streetNumber, out appendix);
operation.CustomData["Zielort Zusatz"] = appendix;
operation.Zielort.Street = street;
operation.Zielort.StreetNumber = streetNumber;
}
break;
case "ORT":
{
operation.Zielort.ZipCode = ParserUtility.ReadZipCodeFromCity(msg);
if (string.IsNullOrWhiteSpace(operation.Zielort.ZipCode))
{
Logger.Instance.LogFormat(LogType.Warning, this, "Could not find a zip code for city '{0}'. Route planning may fail or yield wrong results!", msg);
}
operation.Zielort.City = msg.Remove(0, operation.Zielort.ZipCode.Length).Trim();
// The City-text often contains a dash after which the administrative city appears multiple times (like "City A - City A City A").
// However we can (at least with google maps) omit this information without problems!
int dashIndex = msg.IndexOf('-');
if (dashIndex != -1)
{
// Ignore everything after the dash
operation.Zielort.City = operation.Einsatzort.City.Substring(0, dashIndex);
}
}
break;
case "OBJEKT":
operation.Zielort.Property = msg;
break;
case "STATION":
operation.CustomData["Zielort Station"] = msg;
break;
}
}
break;
case CurrentSection.EEinsatzgrund:
{
switch (prefix)
{
case "SCHLAGW.":
operation.Keywords.Keyword = msg;
break;
case "PRIO.":
operation.Priority = msg;
break;
}
}
break;
case CurrentSection.FBemerkung:
{
// Append with newline at the end in case that the message spans more than one line
operation.Comment += msg + Environment.NewLine;
}
break;
case CurrentSection.GEinsatzmittel:
{
last.FullName = msg;
operation.Resources.Add(last);
last = new OperationResource();
}
break;
case CurrentSection.HFooter:
// The footer can be ignored completely.
break;
}
}
catch (Exception ex)
{
Logger.Instance.LogFormat(LogType.Warning, this, "Error while parsing line '{0}'. The error message was: {1}", i, ex.Message);
}
}
return(operation);
}
Operation IParser.Parse(string[] lines)
{
Operation operation = new Operation();
OperationResource last = new OperationResource();
lines = Utilities.Trim(lines);
CurrentSection section = CurrentSection.AHeader;
bool keywordsOnly = true;
for (int i = 0; i < lines.Length; i++)
{
try
{
string line = lines[i];
if (line.Length == 0)
{
continue;
}
operation.Timestamp = ParserUtility.ReadFaxTimestamp(line, operation.Timestamp);
if (GetSection(line.Trim(), ref section, ref keywordsOnly))
{
continue;
}
string msg = line;
string prefix = "";
string keyword = null;
if (keywordsOnly)
{
if (!ParserUtility.StartsWithKeyword(line, Keywords, out keyword))
{
continue;
}
int x = line.IndexOf(':');
if (x == -1)
{
prefix = keyword;
msg = line.Remove(0, prefix.Length).Trim();
}
else
{
prefix = line.Substring(0, x);
msg = line.Substring(x + 1).Trim();
}
prefix = prefix.Trim().ToUpperInvariant();
}
switch (section)
{
case CurrentSection.AHeader:
{
switch (prefix)
{
case "ABSENDER":
operation.CustomData["Absender"] = msg;
break;
case "TERMIN":
operation.CustomData["Termin"] = msg;
break;
case "EINSATZNUMMER":
operation.OperationNumber = msg;
break;
default:
break;
}
}
break;
case CurrentSection.BMitteiler:
{
// This switch would not be necessary in this section (there is only "Name")...
switch (prefix)
{
case "NAME":
operation.Messenger = msg;
break;
default:
break;
}
}
break;
case CurrentSection.CEinsatzort:
{
switch (prefix)
{
case "STRAßE":
{
string street, streetNumber, appendix;
ParserUtility.AnalyzeStreetLine(msg, out street, out streetNumber, out appendix);
operation.CustomData["Einsatzort Zusatz"] = appendix;
operation.Einsatzort.Street = street;
operation.Einsatzort.StreetNumber = streetNumber;
}
break;
case "ORT":
{
operation.Einsatzort.ZipCode = ParserUtility.ReadZipCodeFromCity(msg);
if (string.IsNullOrWhiteSpace(operation.Einsatzort.ZipCode))
{
Logger.Instance.LogFormat(LogType.Warning, this, "Could not find a zip code for city '{0}'. Route planning may fail or yield wrong results!", operation.Einsatzort.City);
}
operation.Einsatzort.City = msg.Remove(0, operation.Einsatzort.ZipCode.Length).Trim();
// The City-text often contains a dash after which the administrative city appears multiple times (like "City A - City A City A").
// However we can (at least with google maps) omit this information without problems!
int dashIndex = operation.Einsatzort.City.IndexOf(" - ");
if (dashIndex != -1)
{
// Ignore everything after the dash
operation.Einsatzort.City = operation.Einsatzort.City.Substring(0, dashIndex);
}
}
break;
case "OBJEKT":
operation.Einsatzort.Property = msg;
break;
case "PLANNUMMER":
operation.CustomData["Einsatzort Plannummer"] = msg;
break;
case "STATION":
operation.CustomData["Einsatzort Station"] = msg;
break;
default:
break;
}
}
break;
case CurrentSection.DZielort:
{
switch (prefix)
{
case "STRAßE":
{
string street, streetNumber, appendix;
ParserUtility.AnalyzeStreetLine(msg, out street, out streetNumber, out appendix);
operation.CustomData["Zielort Zusatz"] = appendix;
operation.Zielort.Street = street;
operation.Zielort.StreetNumber = streetNumber;
}
break;
case "ORT":
{
string plz = ParserUtility.ReadZipCodeFromCity(msg);
operation.Zielort.ZipCode = plz;
operation.Zielort.City = msg.Remove(0, plz.Length).Trim();
}
break;
case "OBJEKT":
operation.Zielort.Property = msg;
break;
case "STATION":
operation.CustomData["Zielort Station"] = msg;
break;
default:
break;
}
}
break;
case CurrentSection.EEinsatzgrund:
{
switch (prefix)
{
case "SCHLAGW.":
operation.Keywords.Keyword = msg;
break;
case "STICHWORT B":
operation.Keywords.B = msg;
break;
case "STICHWORT R":
operation.Keywords.R = msg;
break;
case "STICHWORT S":
operation.Keywords.S = msg;
break;
case "STICHWORT T":
operation.Keywords.T = msg;
break;
case "PRIO.":
operation.Priority = msg;
break;
default:
break;
}
}
break;
case CurrentSection.FEinsatzmittel:
{
if (line.StartsWith("EINSATZMITTEL", StringComparison.CurrentCultureIgnoreCase))
{
msg = ParserUtility.GetMessageText(line, "EINSATZMITTEL");
last.FullName = msg;
}
else if (line.StartsWith("ALARMIERT", StringComparison.CurrentCultureIgnoreCase) && !string.IsNullOrEmpty(msg))
{
msg = ParserUtility.GetMessageText(line, "Alarmiert");
DateTime dt = ParserUtility.TryGetTimestampFromMessage(msg, operation.Timestamp);
last.Timestamp = dt.ToString();
}
else if (line.StartsWith("GEFORDERTE AUSSTATTUNG", StringComparison.CurrentCultureIgnoreCase))
{
msg = ParserUtility.GetMessageText(line, "Geforderte Ausstattung");
if (!string.IsNullOrWhiteSpace(msg))
{
last.RequestedEquipment.Add(msg);
}
operation.Resources.Add(last);
last = new OperationResource();
}
}
break;
case CurrentSection.GBemerkung:
{
operation.Comment = operation.Comment += msg + "\n";
}
break;
case CurrentSection.HFooter:
// The footer can be ignored completely.
break;
default:
break;
}
}
catch (Exception ex)
{
Logger.Instance.LogFormat(LogType.Warning, this, "Error while parsing line '{0}'. The error message was: {1}", i, ex.Message);
}
}
operation.Comment = ParserUtility.RemoveTrailingNewline(operation.Comment);
return(operation);
}
Operation IParser.Parse(string[] lines)
{
Operation operation = new Operation();
OperationResource last = new OperationResource();
lines = Utilities.Trim(lines);
CurrentSection section = CurrentSection.AHeader;
bool keywordsOnly = true;
for (int i = 0; i < lines.Length; i++)
{
try
{
string line = lines[i];
if (line.Length == 0)
{
continue;
}
if (GetSection(line.Trim(), ref section, ref keywordsOnly))
{
if (section == CurrentSection.CEinsatzort)
{
Regex r = new Regex(@"\d+");
var matches = r.Matches(line);
if (matches.Count == 2)
{
int geoRechts = Convert.ToInt32(matches[0].Value);
int geoHoch = Convert.ToInt32(matches[1].Value);
var geo = GeographicCoords.FromGaussKrueger(geoRechts, geoHoch);
operation.Einsatzort.GeoLatitude = geo.Latitude;
operation.Einsatzort.GeoLongitude = geo.Longitude;
}
}
continue;
}
string msg = line;
string prefix = "";
// Make the keyword check - or not (depends on the section we are in; see above)
string keyword = "";
if (keywordsOnly)
{
if (!ParserUtility.StartsWithKeyword(line, _keywords, out keyword))
{
continue;
}
int x = line.IndexOf(':');
if (x == -1)
{
// If there is no colon found (may happen occasionally) then simply remove the length of the keyword from the beginning
prefix = keyword;
msg = line.Remove(0, prefix.Length).Trim();
}
else
{
prefix = line.Substring(0, x);
msg = line.Substring(x + 1).Trim();
}
prefix = prefix.Trim().ToUpperInvariant();
}
// Parse each section
switch (section)
{
case CurrentSection.AHeader:
{
switch (prefix)
{
case "EINSATZ-NR.":
operation.OperationNumber = msg;
break;
}
}
break;
case CurrentSection.BMitteiler:
operation.Messenger = msg;
break;
case CurrentSection.CEinsatzort:
{
switch (prefix)
{
case "STRAßE":
{
string street, streetNumber, appendix;
ParserUtility.AnalyzeStreetLine(msg, out street, out streetNumber, out appendix);
operation.CustomData["Einsatzort Zusatz"] = appendix;
operation.Einsatzort.Street = street;
operation.Einsatzort.StreetNumber = streetNumber;
}
break;
case "GEMEINDE":
{
operation.Einsatzort.ZipCode = ParserUtility.ReadZipCodeFromCity(msg);
if (string.IsNullOrWhiteSpace(operation.Einsatzort.ZipCode))
{
Logger.Instance.LogFormat(LogType.Warning, this, "Could not find a zip code for city '{0}'. Route planning may fail or yield wrong results!", operation.Einsatzort.City);
}
operation.Einsatzort.City = msg.Remove(0, operation.Einsatzort.ZipCode.Length).Trim();
// The City-text often contains a dash after which the administrative city appears multiple times (like "City A - City A City A").
// However we can (at least with google maps) omit this information without problems!
int dashIndex = operation.Einsatzort.City.IndexOf(" - ");
if (dashIndex != -1)
{
// Ignore everything after the dash
operation.Einsatzort.City = operation.Einsatzort.City.Substring(0, dashIndex).Trim();
}
}
break;
case "OBJEKT":
operation.Einsatzort.Property = msg;
break;
case "KREUZUNG":
operation.Einsatzort.Intersection = msg;
break;
}
}
break;
case CurrentSection.DEinsatzgrund:
{
switch (prefix)
{
case "SCHLAGW.":
operation.Keywords.Keyword = msg;
break;
case "STICHWORT":
operation.Keywords.EmergencyKeyword = msg;
break;
case "PRIORITÄT":
operation.Priority = msg;
break;
}
}
break;
case CurrentSection.EEinsatzmittel:
{
switch (prefix)
{
case "NAME":
last.FullName = msg;
break;
case "ALARMIERT":
msg = ParserUtility.GetTextBetween(msg, null, "AUS");
last.Timestamp = ParserUtility.TryGetTimestampFromMessage(msg, DateTime.Now).ToString();
break;
case "GEF. GERÄT":
// Only add to requested equipment if there is some text,
// otherwise the whole vehicle is the requested equipment
if (!string.IsNullOrWhiteSpace(msg))
{
last.RequestedEquipment.Add(msg);
}
operation.Resources.Add(last);
last = new OperationResource();
break;
}
}
break;
case CurrentSection.FBemerkung:
{
// Append with newline at the end in case that the message spans more than one line
operation.Picture += msg + Environment.NewLine;
}
break;
case CurrentSection.GHinweis:
{
// Append with newline at the end in case that the message spans more than one line
operation.Comment = operation.Comment.AppendLine(msg);
}
break;
case CurrentSection.HFooter:
// The footer can be ignored completely.
break;
}
}
catch (Exception ex)
{
Logger.Instance.LogFormat(LogType.Warning, this, "Error while parsing line '{0}'. The error message was: {1}", i, ex.Message);
}
}
return(operation);
}
Operation IParser.Parse(string[] lines)
{
Operation operation = new Operation();
lines = Utilities.Trim(lines);
CurrentSection section = CurrentSection.AHeader;
bool keywordsOnly = true;
for (int i = 0; i < lines.Length; i++)
{
try
{
string line = lines[i];
if (line.Length == 0)
{
continue;
}
// Try to parse the header and extract date and time if possible
operation.Timestamp = ParserUtility.ReadFaxTimestamp(line, operation.Timestamp);
if (GetSection(line.Trim(), ref section, ref keywordsOnly))
{
continue;
}
string msg = line;
string prefix = "";
// Make the keyword check - or not (depends on the section we are in; see above)
if (keywordsOnly)
{
string keyword;
if (!ParserUtility.StartsWithKeyword(line, Keywords, out keyword))
{
continue;
}
int x = line.IndexOf(':');
if (x == -1)
{
// If there is no colon found (may happen occasionally) then simply remove the length of the keyword from the beginning
prefix = keyword;
msg = line.Remove(0, prefix.Length).Trim();
}
else
{
prefix = line.Substring(0, x);
msg = line.Substring(x + 1).Trim();
}
prefix = prefix.Trim().ToUpperInvariant();
}
// Parse each section
switch (section)
{
case CurrentSection.AHeader:
{
switch (prefix)
{
case "ABSENDER":
operation.CustomData["Absender"] = msg;
break;
case "TERMIN":
operation.CustomData["Termin"] = msg;
break;
case "EINSATZ":
operation.OperationNumber = msg;
break;
}
}
break;
case CurrentSection.BMitteiler:
{
// This switch would not be necessary in this section (there is only "Name")...
switch (prefix)
{
case "NAME":
operation.Messenger = msg;
break;
}
}
break;
case CurrentSection.CEinsatzort:
{
switch (prefix)
{
case "STRAßE":
{
string street, streetNumber, appendix;
ParserUtility.AnalyzeStreetLine(msg, out street, out streetNumber, out appendix);
operation.CustomData["Einsatzort Zusatz"] = appendix;
operation.Einsatzort.Street = street;
operation.Einsatzort.StreetNumber = streetNumber;
}
break;
case "ORT":
{
operation.Einsatzort.ZipCode = ParserUtility.ReadZipCodeFromCity(msg);
if (string.IsNullOrWhiteSpace(operation.Einsatzort.ZipCode))
{
Logger.Instance.LogFormat(LogType.Warning, this, "Could not find a zip code for city '{0}'. Route planning may fail or yield wrong results!", operation.Einsatzort.City);
}
operation.Einsatzort.City = msg.Remove(0, operation.Einsatzort.ZipCode.Length).Trim();
// The City-text often contains a dash after which the administrative city appears multiple times (like "City A - City A City A").
// However we can (at least with google maps) omit this information without problems!
int dashIndex = operation.Einsatzort.City.IndexOf(" - ");
if (dashIndex != -1)
{
operation.CustomData["Einsatzort Kommune"] = operation.Einsatzort.City.Substring(dashIndex).Trim();
// Ignore everything after the dash
operation.Einsatzort.City = operation.Einsatzort.City.Substring(0, dashIndex).Trim();
}
}
break;
case "ABSCHNITT":
operation.Zielort.Intersection = msg;
break;
case "OBJEKT":
operation.Einsatzort.Property = msg;
break;
case "PLANNUMMER":
operation.OperationPlan = msg;
break;
case "STATION":
operation.CustomData["Einsatzort Station"] = msg;
break;
case "ZONE":
operation.Einsatzort.Location = msg;
break;
}
}
break;
case CurrentSection.DZielort:
{
switch (prefix)
{
case "STRAßE":
{
string street, streetNumber, appendix;
ParserUtility.AnalyzeStreetLine(msg, out street, out streetNumber, out appendix);
operation.CustomData["Zielort Zusatz"] = appendix;
operation.Zielort.Street = street;
operation.Zielort.StreetNumber = streetNumber;
}
break;
case "ORT":
{
string zipcode = ParserUtility.ReadZipCodeFromCity(msg);
operation.Zielort.ZipCode = zipcode;
operation.Zielort.City = msg.Remove(0, zipcode.Length).Trim();
}
break;
case "OBJEKT":
operation.Zielort.Property = msg;
break;
case "STATION":
operation.CustomData["Zielort Station"] = msg;
break;
}
}
break;
case CurrentSection.EEinsatzgrund:
{
switch (prefix)
{
case "SCHLAGW.":
Regex regex = new Regex("\\[(.*)]");
if (regex.IsMatch(msg))
{
Match match = regex.Match(msg);
operation.Keywords.EmergencyKeyword = match.Groups[1].Value;
operation.Keywords.Keyword = msg.Replace(match.Value, "");
}
else
{
operation.Keywords.Keyword = msg;
}
break;
case "STICHWORT B":
operation.Keywords.B = msg;
break;
case "STICHWORT T":
operation.Keywords.T = msg;
break;
case "STICHWORT S":
operation.Keywords.S = msg;
break;
case "STICHWORT I":
operation.CustomData["Stichwort I"] = msg;
break;
case "STICHWORT R":
operation.Keywords.R = msg;
break;
case "PRIO.":
operation.Priority = msg;
break;
}
}
break;
case CurrentSection.FEinsatzmittel:
{
if (line.StartsWith("NAME", StringComparison.CurrentCultureIgnoreCase))
{
continue;
}
int indexEquip = line.IndexOf(":", StringComparison.Ordinal);
int indexTime = line.IndexOf(":", indexEquip + 1, StringComparison.Ordinal);
if (line.Contains("Fehlt:"))
{
indexTime = line.IndexOf(":", indexTime + 1, StringComparison.Ordinal);
}
OperationResource resource = new OperationResource();
resource.FullName = line.Substring(0, indexEquip).Trim();
resource.RequestedEquipment.Add(line.Substring(indexEquip + 1, indexTime - indexEquip - 1).Trim());
resource.Timestamp = line.Substring(indexTime + 1).Trim();
operation.Resources.Add(resource);
}
break;
case CurrentSection.GBemerkung:
{
// Append with newline at the end in case that the message spans more than one line
operation.Comment = operation.Comment.AppendLine(msg);
}
break;
case CurrentSection.HTextbausteine:
{
// Append with newline at the end in case that the message spans more than one line
operation.Picture = operation.Picture.AppendLine(msg);
}
break;
case CurrentSection.IFooter:
// The footer can be ignored completely.
break;
}
}
catch (Exception ex)
{
Logger.Instance.LogFormat(LogType.Warning, this, "Error while parsing line '{0}'. The error message was: {1}", i, ex.Message);
}
}
return(operation);
}
Operation IParser.Parse(string[] lines)
{
Operation operation = new Operation();
lines = Utilities.Trim(lines);
CurrentSection section = CurrentSection.AHeader;
bool keywordsOnly = true;
InnerSection innerSection = InnerSection.AStraße;
for (int i = 0; i < lines.Length; i++)
{
try
{
string line = lines[i];
if (line.Length == 0)
{
continue;
}
// Try to parse the header and extract date and time if possible
operation.Timestamp = ParserUtility.ReadFaxTimestamp(line, operation.Timestamp);
if (GetSection(line.Trim(), ref section, ref keywordsOnly))
{
continue;
}
string msg = line;
string prefix = "";
// Make the keyword check - or not (depends on the section we are in; see above)
if (keywordsOnly)
{
string keyword;
if (!ParserUtility.StartsWithKeyword(line, Keywords, out keyword))
{
continue;
}
int x = line.IndexOf(':');
if (x == -1)
{
// If there is no colon found (may happen occasionally) then simply remove the length of the keyword from the beginning
prefix = keyword;
msg = line.Remove(0, prefix.Length).Trim();
}
else
{
prefix = line.Substring(0, x);
msg = line.Substring(x + 1).Trim();
}
prefix = prefix.Trim().ToUpperInvariant();
}
// Parse each section
switch (section)
{
case CurrentSection.AHeader:
//TODO: Absender unterbringen
break;
case CurrentSection.BMitteiler:
{
// This switch would not be necessary in this section (there is only "Name")...
switch (prefix)
{
case "NAME":
operation.Messenger = msg;
break;
}
}
break;
case CurrentSection.CEinsatzort:
{
switch (prefix)
{
case "STRAßE":
{
innerSection = InnerSection.AStraße;
string street, streetNumber, appendix;
ParserUtility.AnalyzeStreetLine(msg, out street, out streetNumber, out appendix);
operation.CustomData["Einsatzort Zusatz"] = appendix;
operation.Einsatzort.Street = street;
operation.Einsatzort.StreetNumber = streetNumber;
}
break;
case "ORT":
{
innerSection = InnerSection.BOrt;
operation.Einsatzort.ZipCode = ParserUtility.ReadZipCodeFromCity(msg);
if (string.IsNullOrWhiteSpace(operation.Einsatzort.ZipCode))
{
Logger.Instance.LogFormat(LogType.Warning, this, "Could not find a zip code for city '{0}'. Route planning may fail or yield wrong results!", operation.Einsatzort.City);
}
operation.Einsatzort.City = msg.Remove(0, operation.Einsatzort.ZipCode.Length).Trim();
// The City-text often contains a dash after which the administrative city appears multiple times (like "City A - City A City A").
// However we can (at least with google maps) omit this information without problems!
int dashIndex = operation.Einsatzort.City.IndexOf(" - ");
if (dashIndex != -1)
{
// Ignore everything after the dash
operation.Einsatzort.City = operation.Einsatzort.City.Substring(0, dashIndex).Trim();
}
}
break;
case "OBJEKT":
innerSection = InnerSection.CObjekt;
operation.Einsatzort.Property = msg;
break;
case "KREUZUNG":
operation.Einsatzort.Intersection = msg;
break;
case "KOORDINATE":
Regex r = new Regex(@"(\d+\.\d+)");
var matches = r.Matches(line);
if (matches.Count == 2)
{
NumberFormatInfo nfi = new NumberFormatInfo {
NumberDecimalSeparator = "."
};
double geoRechts = Convert.ToDouble(matches[0].Value, nfi);
double geoHoch = Convert.ToDouble(matches[1].Value, nfi);
var geo = GeographicCoords.FromGaussKrueger(geoRechts, geoHoch);
operation.Einsatzort.GeoLatitude = geo.Latitude;
operation.Einsatzort.GeoLongitude = geo.Longitude;
}
break;
default:
switch (innerSection)
{
case InnerSection.AStraße:
//Quite dirty because of Streetnumber. Looking for better solution
operation.Einsatzort.Street += msg;
break;
case InnerSection.BOrt:
operation.Einsatzort.City += msg;
break;
case InnerSection.CObjekt:
operation.Einsatzort.Property += msg;
break;
}
break;
}
}
break;
case CurrentSection.DZielort:
switch (prefix)
{
case "STRAßE":
{
innerSection = InnerSection.AStraße;
string street, streetNumber, appendix;
ParserUtility.AnalyzeStreetLine(msg, out street, out streetNumber, out appendix);
operation.CustomData["Zielort Zusatz"] = appendix;
operation.Zielort.Street = street;
operation.Zielort.StreetNumber = streetNumber;
}
break;
case "ORT":
{
innerSection = InnerSection.BOrt;
operation.Zielort.ZipCode = ParserUtility.ReadZipCodeFromCity(msg);
if (string.IsNullOrWhiteSpace(operation.Zielort.ZipCode))
{
Logger.Instance.LogFormat(LogType.Warning, this, "Could not find a zip code for city '{0}'. Route planning may fail or yield wrong results!", operation.Zielort.City);
}
operation.Zielort.City = msg.Remove(0, operation.Zielort.ZipCode.Length).Trim();
}
break;
case "OBJEKT":
innerSection = InnerSection.CObjekt;
operation.Zielort.Property = msg;
break;
default:
switch (innerSection)
{
case InnerSection.AStraße:
//Quite dirty because of Streetnumber. Looking for better solution
operation.Einsatzort.Street += msg;
break;
case InnerSection.BOrt:
operation.Einsatzort.City += msg;
break;
case InnerSection.CObjekt:
operation.Einsatzort.Property += msg;
break;
}
break;
}
break;
case CurrentSection.EEinsatzgrund:
{
switch (prefix)
{
case "SCHLAGW.":
operation.Keywords.Keyword = msg;
break;
case "STICHWORT":
operation.Keywords.EmergencyKeyword = msg;
break;
}
}
break;
case CurrentSection.FEinsatzmittel:
{
operation.Resources.Add(new OperationResource {
FullName = msg.Substring(0, msg.LastIndexOf('('))
});
}
break;
case CurrentSection.GBemerkung:
{
// Append with newline at the end in case that the message spans more than one line
operation.Comment = operation.Comment.AppendLine(msg);
}
break;
case CurrentSection.HFooter:
// The footer can be ignored completely.
break;
}
}
catch (Exception ex)
{
Logger.Instance.LogFormat(LogType.Warning, this, "Error while parsing line '{0}'. The error message was: {1}", i, ex.Message);
}
}
return(operation);
}
Operation IParser.Parse(string[] lines)
{
Operation operation = new Operation();
OperationResource last = new OperationResource();
lines = Utilities.Trim(lines);
CurrentSection section = CurrentSection.AHeader;
bool keywordsOnly = true;
for (int i = 0; i < lines.Length; i++)
{
try
{
string line = lines[i];
if (line.Length == 0)
{
continue;
}
if (GetSection(line.Trim(), ref section, ref keywordsOnly))
{
continue;
}
string msg = line;
string prefix = "";
// Make the keyword check - or not (depends on the section we are in; see above)
string keyword = "";
if (keywordsOnly)
{
if (!ParserUtility.StartsWithKeyword(line, _keywords, out keyword))
{
continue;
}
int x = line.IndexOf(':');
if (x == -1)
{
// If there is no colon found (may happen occasionally) then simply remove the length of the keyword from the beginning
prefix = keyword;
msg = line.Remove(0, prefix.Length).Trim();
}
else
{
prefix = line.Substring(0, x);
msg = line.Substring(x + 1).Trim();
}
prefix = prefix.Trim().ToUpperInvariant();
}
// Parse each section
switch (section)
{
case CurrentSection.AHeader:
{
switch (prefix)
{
case "ABSENDER":
operation.OperationNumber = ParserUtility.GetTextBetween(msg, "Einsatznummer:");
break;
}
}
break;
case CurrentSection.BEinsatzort:
{
switch (prefix)
{
case "STRAßE":
{
string street, streetNumber, appendix;
ParserUtility.AnalyzeStreetLine(msg, out street, out streetNumber, out appendix);
operation.CustomData["Einsatzort Zusatz"] = appendix;
operation.Einsatzort.Street = street;
operation.Einsatzort.StreetNumber = streetNumber;
}
break;
case "ORT":
{
string zipCode = ParserUtility.ReadZipCodeFromCity(msg);
operation.Einsatzort.ZipCode = zipCode;
operation.Einsatzort.City = ParserUtility.GetTextBetween(msg, null, "Gemeinde");
operation.Einsatzort.City = operation.Einsatzort.City.Replace(zipCode, "").Trim();
// The City-text often contains a dash after which the administrative city appears multiple times (like "City A - City A City A").
// However we can (at least with google maps) omit this information without problems!
int dashIndex = operation.Einsatzort.City.IndexOf(" - ");
if (dashIndex != -1)
{
// Ignore everything after the dash
operation.Einsatzort.City = operation.Einsatzort.City.Substring(0, dashIndex);
}
operation.CustomData["Einsatzort Gemeinde"] = ParserUtility.GetTextBetween(msg, "Gemeinde:");
}
break;
case "OBJEKT":
operation.Einsatzort.Property = msg;
break;
case "STATION":
operation.CustomData["Einsatzort Station"] = msg;
break;
case "KREUZUNG":
operation.Einsatzort.Intersection = msg;
break;
case "PLANNUMMER":
operation.OperationPlan = msg;
break;
}
}
break;
case CurrentSection.CEreignis:
{
switch (prefix)
{
case "MELDEBILD":
operation.Keywords.Keyword = msg;
break;
case "PRIORITÄT":
operation.Priority = msg;
break;
}
}
break;
case CurrentSection.DZielort:
switch (prefix)
{
case "STRAßE":
{
string street, streetNumber, appendix;
ParserUtility.AnalyzeStreetLine(msg, out street, out streetNumber, out appendix);
operation.CustomData["Zielort Zusatz"] = appendix;
operation.Zielort.Street = street;
operation.Zielort.StreetNumber = streetNumber;
}
break;
case "ORT":
{
operation.Zielort.City = ParserUtility.GetTextBetween(msg, null, "Gemeinde");
// The City-text often contains a dash after which the administrative city appears multiple times (like "City A - City A City A").
// However we can (at least with google maps) omit this information without problems!
int dashIndex = operation.Zielort.City.IndexOf('-');
if (dashIndex != -1)
{
// Ignore everything after the dash
operation.Zielort.City = operation.Einsatzort.City.Substring(0, dashIndex);
}
operation.CustomData["Zielort Gemeinde"] = ParserUtility.GetTextBetween(msg, "Gemeinde:");
}
break;
case "OBJEKT":
operation.Zielort.Property = msg;
break;
case "STATION":
operation.CustomData["Zielort Station"] = msg;
break;
}
break;
case CurrentSection.FEinsatzmittel:
{
string name, equip;
name = ParserUtility.GetTextBetween(msg, null, ">> gefordert:");
equip = ParserUtility.GetTextBetween(msg, ">> gefordert:");
OperationResource resource = new OperationResource
{
FullName = name,
RequestedEquipment = new List <string>()
{
equip
}
};
operation.Resources.Add(resource);
}
break;
case CurrentSection.EBemerkung:
{
// Append with newline at the end in case that the message spans more than one line
operation.Picture = operation.Picture.AppendLine(msg);
}
break;
case CurrentSection.GFooter:
// The footer can be ignored completely.
break;
}
}
catch (Exception ex)
{
string l = lines[i];
Logger.Instance.LogFormat(LogType.Warning, this, "Error while parsing line '{0}'. The error message was: {1}", i, ex.Message);
}
}
return(operation);
}
Operation IParser.Parse(string[] lines)
{
Operation operation = new Operation();
CurrentSection section = CurrentSection.AAnfang;
lines = Utilities.Trim(lines);
foreach (var line in lines)
{
string keyword;
if (ParserUtility.StartsWithKeyword(line, _keywords, out keyword))
{
switch (keyword)
{
case "EINSATZNUMMER": { section = CurrentSection.BeNr; break; }
case "ORT ": { section = CurrentSection.CEinsatzort; break; }
case "STRASSE": { section = CurrentSection.DStraße; break; }
case "OBJEKT ": { section = CurrentSection.FObjekt; break; }
case "EINSATZPLANNUMMER": { section = CurrentSection.GEinsatzplan; break; }
case "DIAGNOSE": { section = CurrentSection.HMeldebild; break; }
case "EINSATZSTICHWORT": { section = CurrentSection.JEinsatzstichwort; break; }
case "MELDENDE(R)": { section = CurrentSection.LMeldender; break; }
case "BEMERKUNGEN": { section = CurrentSection.KHinweis; break; }
case "DAS FAX WURDE": { section = CurrentSection.OFaxtime; break; }
case "AUSDRUCK VOM": { section = CurrentSection.MEnde; break; }
}
}
else
{
section = CurrentSection.MEnde;
}
switch (section)
{
case CurrentSection.BeNr:
operation.OperationNumber = ParserUtility.GetMessageText(line, keyword);
break;
case CurrentSection.CEinsatzort:
string txt = ParserUtility.GetMessageText(line, keyword);
operation.Einsatzort.ZipCode = ParserUtility.ReadZipCodeFromCity(txt);
operation.Einsatzort.City = txt.Remove(0, operation.Einsatzort.ZipCode.Length).Trim();
break;
case CurrentSection.DStraße:
operation.Einsatzort.Street = ParserUtility.GetMessageText(line, keyword);
break;
case CurrentSection.FObjekt:
operation.Einsatzort.Property = ParserUtility.GetMessageText(line, keyword);
break;
case CurrentSection.GEinsatzplan:
operation.OperationPlan = ParserUtility.GetMessageText(line, keyword);
break;
case CurrentSection.HMeldebild:
operation.Picture = ParserUtility.GetMessageText(line, keyword);
break;
case CurrentSection.JEinsatzstichwort:
operation.Keywords.EmergencyKeyword = ParserUtility.GetMessageText(line, keyword);
break;
case CurrentSection.KHinweis:
operation.Comment = operation.Comment.AppendLine(ParserUtility.GetMessageText(line, keyword));
break;
case CurrentSection.OFaxtime:
operation.Timestamp = ParserUtility.ReadFaxTimestamp(line, DateTime.Now);
break;
case CurrentSection.MEnde:
break;
}
}
return(operation);
}
Operation IParser.Parse(string[] lines)
{
Operation operation = new Operation();
CurrentSection section = CurrentSection.Anfang;
lines = Utilities.Trim(lines);
foreach (var line in lines)
{
string keyword;
if (ParserUtility.StartsWithKeyword(line, _keywords, out keyword))
{
string msg = ParserUtility.GetMessageText(line, keyword);
switch (keyword.Trim())
{
case "Einsatznummer":
operation.OperationNumber = msg;
break;
case "Meldungseingang":
operation.Timestamp = ParserUtility.ReadFaxTimestamp(msg, DateTime.Now);
break;
case "Stichwort":
operation.Keywords.Keyword = msg;
break;
case "Sondersignal":
operation.CustomData["Sondersignal"] = msg;
break;
case "Hinweis":
operation.Comment = msg;
break;
case "Ort":
string zip = ParserUtility.ReadZipCodeFromCity(msg);
operation.Einsatzort.ZipCode = zip;
operation.Einsatzort.City = msg.Replace(zip, "").Trim();
break;
case "Ortsteil":
operation.CustomData["Einsatzortz Ortsteil"] = msg;
break;
case "Strasse":
string street, streetNumber, appendix;
ParserUtility.AnalyzeStreetLine(msg, out street, out streetNumber, out appendix);
operation.CustomData["Einsatzort Zusatz"] = appendix;
operation.Einsatzort.Street = street;
operation.Einsatzort.StreetNumber = streetNumber;
break;
case "Objekt":
operation.Einsatzort.Property = msg;
break;
case "Kategorie":
operation.CustomData["Einsatzobjekt Kategorie"] = msg;
break;
case "Information":
operation.CustomData["Einsatzobjekt Information"] = msg;
break;
case "Einsatzplan":
operation.OperationPlan = msg;
break;
case "BMA-Nr.":
operation.CustomData["Einsatzobjekt BMA-Nr."] = msg;
break;
case "Objektplan":
operation.CustomData["Einsatzobjekt Objektplan"] = msg;
break;
case "Zugeteilte Fahrzeuge":
section = CurrentSection.Einsatzmittel;
break;
}
}
switch (section)
{
case CurrentSection.Einsatzmittel:
if (line.Equals("Zugeteilte Fahrzeuge:", StringComparison.InvariantCultureIgnoreCase))
{
break;
}
OperationResource resource = new OperationResource();
resource.FullName = line;
operation.Resources.Add(resource);
break;
}
}
return(operation);
}