//function to be passed into the thread that walls are spawned in
//this allows us to wait a few seconds before spawning walls in order to maintain a gap between them.
public void spawnWall(cVector3 enda, cVector3 endb, float thickness, float height, cGame pownergame, cCritterSlideWall.TYPE wallType, cVector3 moveAxisAndDirection, bool bounce, cVector3 startPos, cVector3 endPos)
{
int numWalls = 3;
float spawnPos = 10; //position the ith wall must reach before the (i + 1)th wall spawns
//spawn the first wall
cCritterSlideWall wall = new cCritterSlideWall(enda, endb, thickness, height, pownergame, wallType, moveAxisAndDirection, bounce, startPos, endPos);
cSpriteTextureBox spriteBox = new cSpriteTextureBox(wall.Skeleton, BitmapRes.Wood2, 16);
wall.Sprite = spriteBox;
//spawn the remaining walls
for (int i = 0; i < numWalls - 1; i++)
{
//wait until the previous wall reaches the spawn position
while (wall.Position.Z > spawnPos)
{
;
}
//spawn the wall and add textures.
wall = new cCritterSlideWall(enda, endb, thickness, height, pownergame, wallType, moveAxisAndDirection, bounce, startPos, endPos);
spriteBox = new cSpriteTextureBox(wall.Skeleton, BitmapRes.Wood2, 16);
wall.Sprite = spriteBox;
}
}
public override cSprite copy( )
{
cSpriteTextureBox s = new cSpriteTextureBox();
s.copy(this);
return(s);
}
//Just sets the fill colors
//cSprite overloads
public override void copy( cSprite psprite ) //Use this in copy constructor and operator=
{
base.copy( psprite );
if ( !psprite.IsKindOf( "cSpriteTextureBox" ))
return ; //You're done if psprite isn't a cSpriteTextureBox*.
cSpriteTextureBox ptexturebox = ( cSpriteTextureBox )( psprite ); /* I know it is a
cSpriteTextureBox at this point, but I need to do a cast, so the compiler will
let me call cSpriteTextureBox methods. */
_pskeleton.copy(ptexturebox._pskeleton);
}
//setRoom1 creates a new room when the player runs through the previous door
public void setRoom1( )
{
//remove critters and wall
Biota.purgeCritters("cCritterWall");
Biota.purgeCritters("cCritter3Dcharacter");
setBorder(64.0f, 16.0f, 64.0f); // size of the world
//create new room 'shell'
cRealBox3 skeleton = new cRealBox3();
skeleton.copy(_border);
setSkyBox(skeleton);
//set textures and graphics
SkyBox.setSideTexture(cRealBox3.HIZ, BitmapRes.Wall3); //Make the near HIZ transparent
SkyBox.setSideTexture(cRealBox3.LOZ, BitmapRes.Wall3); //Far wall
SkyBox.setSideTexture(cRealBox3.LOX, BitmapRes.Wall3); //left wall
SkyBox.setSideTexture(cRealBox3.HIX, BitmapRes.Wall3); //right wall
SkyBox.setSideTexture(cRealBox3.LOY, BitmapRes.Concrete); //floor
SkyBox.setSideTexture(cRealBox3.HIY, BitmapRes.Concrete); //ceiling
//set number of critters to be created. Adjust numbers for increasing difficulty between rooms
_seedcount = 7;
WrapFlag = cCritter.BOUNCE;
setPlayer(new cCritter3DPlayer(this));
_ptreasure = new cCritterTreasure(this);
//create a door at a new position in the room
cCritterDoor pdwall = new cCritterDoor(
new cVector3(_border.Lox, _border.Loy, _border.Midz),
new cVector3(_border.Lox, _border.Midy - 3, _border.Midz),
0.1f, 2, this);
cSpriteTextureBox pspritedoor =
new cSpriteTextureBox(pdwall.Skeleton, BitmapRes.Door);
pdwall.Sprite = pspritedoor;
//move player to new position in next room
Player.moveTo(new cVector3(0.0f, -10.0f, 32.0f));
//set collision flag and reset age of new room
wentThrough = true;
startNewRoom = Age;
}
public void setRoom3()
{
Biota.purgeCritters("cCritterWall");
Biota.purgeCritters("cCritter3Dcharacter");
Biota.purgeCritters("cCritterBoss");
setBorder(50.0f, 20.0f, 50.0f);
cRealBox3 skeleton = new cRealBox3();
skeleton.copy(_border);
setSkyBox(skeleton);
SkyBox.setAllSidesTexture(BitmapRes.Graphics3, 2);
SkyBox.setSideTexture(cRealBox3.LOY, BitmapRes.Concrete);
SkyBox.setSideSolidColor(cRealBox3.HIY, Color.Blue);
_seedcount = 0;
Player.setMoveBox(new cRealBox3(50.0f, 20.0f, 50.0f));
wentThrough = true;
startNewRoom = Age;
cCritterDoor pdwall = new cCritterDoor(
new cVector3(_border.Midx, _border.Loy, _border.Loz),
new cVector3(_border.Midx, _border.Midy - 3, _border.Loz),
2.0f, 2, this);
cSpriteTextureBox pspritedoor =
new cSpriteTextureBox(pdwall.Skeleton, BitmapRes.Door);
pdwall.Sprite = pspritedoor;
float height = 0.1f * _border.YSize;
float ycenter = -_border.YRadius + height / 2.0f;
float wallthickness = cGame3D.WALLTHICKNESS + 1.0f;
cCritterSlideWall pwall = new cCritterSlideWall(new cVector3(_border.Midx, ycenter - 10, _border.Midz + 10), new cVector3(_border.Hix + 50, ycenter - 10, _border.Midz + 10),
height, wallthickness, this, cCritterSlideWall.TYPE.HARMFUL, new cVector3(0.0f, -0.05f, 0.0f), false, 200);
cSpriteTextureBox pspritebox = new cSpriteTextureBox(pwall.Skeleton, BitmapRes.Wood2, 16);
pwall.Sprite = pspritebox;
seedCritters();
_ptreasure = new cCritterMedpack(this, new cVector3(_border.Midx, _border.Midy - 2.0f,
_border.Loz - 1.5f * cGame3D.TREASURERADIUS));
cCritterBossDragonKnight boss = new cCritterBossDragonKnight(this, new cVector3(_border.Midx, _border.Loy, _border.Midz - 5), new DragonBullet(1.0f));
}
public cGame3D()
{
doorcollision = false;
_menuflags &= ~cGame.MENU_BOUNCEWRAP;
_menuflags |= cGame.MENU_HOPPER; //Turn on hopper listener option.
_spritetype = cGame.ST_MESHSKIN;
setBorder(64.0f, 16.0f, 64.0f); // size of the world
cRealBox3 skeleton = new cRealBox3();
skeleton.copy(_border);
setSkyBox(skeleton);
/* In this world the coordinates are screwed up to match the screwed up
* listener that I use. I should fix the listener and the coords.
* Meanwhile...
* I am flying into the screen from HIZ towards LOZ, and
* LOX below and HIX above and
* LOY on the right and HIY on the left. */
SkyBox.setSideTexture(cRealBox3.HIZ, BitmapRes.Wall3); //Make the near HIZ transparent
SkyBox.setSideTexture(cRealBox3.LOZ, BitmapRes.Wall3); //Far wall
SkyBox.setSideTexture(cRealBox3.LOX, BitmapRes.Wall3); //left wall
SkyBox.setSideTexture(cRealBox3.HIX, BitmapRes.Wall3); //right wall
SkyBox.setSideTexture(cRealBox3.LOY, BitmapRes.Concrete); //floor
SkyBox.setSideTexture(cRealBox3.HIY, BitmapRes.Concrete); //ceiling
WrapFlag = cCritter.BOUNCE;
_seedcount = 7;
setPlayer(new cCritter3DPlayer(this));
_ptreasure = new cCritterTreasure(this);
cCritterDoor pdwall = new cCritterDoor(
new cVector3(_border.Lox, _border.Loy, _border.Midz),
new cVector3(_border.Lox, _border.Midy - 3, _border.Midz),
0.1f, 2, this);
cSpriteTextureBox pspritedoor =
new cSpriteTextureBox(pdwall.Skeleton, BitmapRes.Door);
pdwall.Sprite = pspritedoor;
}
public void setRoom1( )
{
Biota.purgeCritters <cCritterWall>();
Biota.purgeCritters <cCritter3Dcharacter>();
Biota.purgeCritters <cCritterShape>();
setBorder(10.0f, 15.0f, 10.0f);
cRealBox3 skeleton = new cRealBox3();
skeleton.copy(_border);
setSkyBox(skeleton);
SkyBox.setAllSidesTexture(BitmapRes.Graphics1, 2);
SkyBox.setSideTexture(cRealBox3.LOY, BitmapRes.Concrete);
SkyBox.setSideSolidColor(cRealBox3.HIY, Color.Blue);
_seedcount = 0;;;
Player.setMoveBox(new cRealBox3(10.0f, 15.0f, 10.0f));
float zpos = 0.0f; /* Point on the z axis where we set down the wall. 0 would be center,
* halfway down the hall, but we can offset it if we like. */
float height = 0.1f * _border.YSize;
float ycenter = -_border.YRadius + height / 2.0f;
float wallthickness = cGame3D.WALLTHICKNESS;
cCritterWall pwall = new cCritterWall(
new cVector3(_border.Midx + 2.0f, ycenter, zpos),
new cVector3(_border.Hix, ycenter, zpos),
height, //thickness param for wall's dy which goes perpendicular to the
//baseline established by the frist two args, up the screen
wallthickness, //height argument for this wall's dz goes into the screen
this);
cSpriteTextureBox pspritebox =
new cSpriteTextureBox(pwall.Skeleton, BitmapRes.Wall3, 16); //Sets all sides
/* We'll tile our sprites three times along the long sides, and on the
* short ends, we'll only tile them once, so we reset these two. */
pwall.Sprite = pspritebox;
wentThrough = true;
startNewRoom = Age;
}
//Constructors
public cGame()
{
_seedcount = COUNTSTART;
_gameover = false;
_maxscore = MAXSCORE;
_scorecorrection = 0;
_wrapflag = cCritter.WRAP;
_bDragging = false;
_pfocus = null;
_pplayer = null;
_border = new cRealBox3(cGame.WORLDWIDTH, cGame.WORLDHEIGHT); //Default no zsize, computes faster.
_pskybox = null;
_cursorpos = new cVector3(0.0f, 0.0f);
_level = 1;
_spritetype = cGame.ST_SPRITETYPENOTUSED;
_menuflags = (cGame.MENU_ALL & ~cGame.MENU_AUTOPLAY & ~cGame.MENU_HOPPER);
_newgame = true;
//Fix the static readonlys
/* Reset the various static readonlys that may have been set to different values by previously
* running some other game. */
cCritter.Maxspeed = cGame.CRITTERMAXSPEED;
cCritter.MinRadius = cGame.CRITTERMINRADIUS;
cCritter.MaxRadius = cGame.CRITTERMAXRADIUS;
cCritter.BulletRadius = cGame.BULLETRADIUS;
//Allocate the pointer variables.
_pbiota = new cBiota(this);
_pcollider = new cCollider();
_pcontroller = Framework.Keydev;
_plightingmodel = new cLightingModel(true); //Default lighting model enables lights.
setBorder(cGame.WORLDWIDTH, cGame.WORLDHEIGHT, 0.0f);
// setBorder initializes _pskybox as well
//Set the player, we want to make sure a game always has a player
setPlayer(new cCritterPlayer(this)); //Sets _pplayer AND adds it to _pbiota.
}
public cGame(cBiota pbiota)
{
_pcollider = new cCollider();
_pcontroller = Framework.Keydev;
_pbiota = pbiota;
_pbiota.setGame(this);
_pfocus = new cCritter();
_border = new cRealBox3();
_pskybox = new cSpriteTextureBox();
_plightingmodel = new cLightingModel();
_cursorpos = new cVector3();
//Deleting the _pbiota killed off your _pplayer, so you need to get a new one.
if (_pbiota.Size > 0) // use the first member of pbiota if there is one.
{
_pplayer = _pbiota.GetAt(0);
}
else //otherwise make a dummy.
{
_pplayer = new cCritter();
cCritter pdummyplayer = new cCritter();
setPlayer(pdummyplayer);
}
}
public void setRoom2()
{
Biota.purgeCritters("cCritterWall");
Biota.purgeCritters("cCritter3Dcharacter");
Biota.purgeCritters("cCritter3DCharacterEnemy");
setBorder(BORDER_XZ, BORDER_Y, BORDER_XZ);
cRealBox3 skeleton = new cRealBox3();
skeleton.copy(_border);
setSkyBox(skeleton);
SkyBox.setAllSidesTexture(BitmapRes.BossRoom, 0);
SkyBox.setSideTexture(cRealBox3.LOX, BitmapRes.BossRoom_90r);
SkyBox.setSideTexture(cRealBox3.HIX, BitmapRes.BossRoom_90r);
SkyBox.setSideTexture(cRealBox3.LOY, BitmapRes.Concrete);
SkyBox.setSideSolidColor(cRealBox3.HIY, Color.Blue);
_seedcount = 0;
Player.setMoveBox(new cRealBox3(BORDER_XZ, BORDER_Y, BORDER_XZ));
Player.MaxSpeed = 30; //reduce player max speed to account for smaller room
Player.moveTo(new cVector3(_border.Midx, _border.Midy, _border.Hiz));
float zpos = 0.0f; /* Point on the z axis where we set down the wall. 0 would be center,
* halfway down the hall, but we can offset it if we like. */
float height = 0.1f * _border.YSize;
float ycenter = -_border.YRadius + height / 2.0f;
float wallthickness = cGame3D.WALLTHICKNESS;
cCritterWall pwall = new cCritterWall(
new cVector3(_border.Lox, ycenter, zpos),
new cVector3(_border.Hix, ycenter, zpos),
_border.YSize - 4, //thickness param for wall's dy which goes perpendicular to the
//baseline established by the frist two args, up the screen
wallthickness, //height argument for this wall's dz goes into the screen
this);
cSpriteTextureBox pspritebox =
new cSpriteTextureBox(pwall.Skeleton, BitmapRes.Wall3, 16); //Sets all sides
/* We'll tile our sprites three times along the long sides, and on the
* short ends, we'll only tile them once, so we reset these two. */
pwall.Sprite = pspritebox;
wentThrough = true;
startNewRoom = Age;
movingWall = new cCritterMovingWall(
new cVector3(_border.Midx - 2, _border.Midy, _border.Loz + 10.0f),
new cVector3(_border.Midx - 2, _border.Midy, _border.Loz + 2.0f),
10.0f, 1, this);
cSpriteTextureBox pspritedoor =
new cSpriteTextureBox(movingWall.Skeleton, BitmapRes.Door);
movingWall.Sprite = pspritedoor;
shouldMoveWall = true;
//spawn two bosses in final room
cCritter3DBoss boss1 = new cCritter3DBoss(this);
boss1.moveTo(new cVector3(_border.Hiz - 3.0f, _border.Loy, _border.Hix - 3.0f));
cCritter3DBoss boss2 = new cCritter3DBoss(this);
boss2.moveTo(new cVector3(_border.Loz + 3.0f, _border.Loy, _border.Lox + 3.0f));
cCritterDragonball dball6 = new cCritterDragonball(this);
dball6.moveTo(new cVector3(_border.Lox, Border.Loy, _border.Hiz - 3.0f));
cCritterDragonball dball7 = new cCritterDragonball(this);
dball7.moveTo(new cVector3(_border.Hix - 2, Border.Loy, _border.Loz + 2));
}
/// <summary>
/// Used to set the SkyBox, a box set around the player and critters, which allows colors and textures to
/// be added to the walls, ceiling and floor (on the SkyBox object, use setSideSolidColor or setSideTexture,
/// for example). The skybox is set using two vectors which represent the corners. The first vector contains the
/// lowest coordinate values of x, y, and z, and the second vector contains the highest coordinate values of x, y, and z.
/// </summary>
/// <param name="locorner">Contains the lowest coordinate values of x, y, and z.</param>
/// <param name="hicorner">Contains the highest coordinate values of x, y, and z.</param>
/// <param name="resourceID">You can use this to set textures to all sides (individual sides can be changed later).
/// Use BitmapRest to select the texture to use. This paramater is set to -1 by default, which means just
/// use plain rectangles initially for the faces.</param>
public void setSkyBox(cVector3 locorner, cVector3 hicorner, int resourceID = -1)
{
_pskybox = new cSpriteTextureBox(locorner, hicorner, resourceID);
// _pskybox->setColorStyle(new cColorStyle());
}
public void setRoom1( )
{
Biota.purgeCritters("cCritterWall");
Biota.purgeCritters("cCritter3Dcharacter");
Biota.purgeCritters("cCritterWank");
Biota.purgeCritters("cCritterGohan");
setBorder(BORDER_XZ, BORDER_Y, BORDER_XZ);
cRealBox3 skeleton = new cRealBox3();
skeleton.copy(_border);
setSkyBox(skeleton);
SkyBox.setAllSidesTexture(BitmapRes.Dragonball_bg3, 0);
SkyBox.setSideTexture(cRealBox3.LOX, BitmapRes.Dragonball_bg3_90r);
SkyBox.setSideTexture(cRealBox3.HIX, BitmapRes.Dragonball_bg3_90r);
SkyBox.setSideTexture(cRealBox3.LOY, BitmapRes.Concrete);
SkyBox.setSideSolidColor(cRealBox3.HIY, Color.Blue);
_seedcount = 0;
Player.setMoveBox(new cRealBox3(BORDER_XZ, BORDER_Y, BORDER_XZ));
Player.MaxSpeed = 50; //reduce player max speed to account for smaller room
Player.moveTo(new cVector3(_border.Midx, _border.Midy, _border.Hiz));
float zpos = 0.0f; /* Point on the z axis where we set down the wall. 0 would be center,
* halfway down the hall, but we can offset it if we like. */
float height = 0.1f * _border.YSize;
float ycenter = -_border.YRadius + height / 2.0f;
wentThrough = true;
startNewRoom = Age;
cCritterDoor pdwall = new cCritterDoor(
new cVector3(_border.Lox, _border.Loy, _border.Midz),
new cVector3(_border.Lox, _border.Midy - 3, _border.Midz),
0.1f, 3, this);
cSpriteTextureBox pspritedoor =
new cSpriteTextureBox(pdwall.Skeleton, BitmapRes.Door);
pdwall.Sprite = pspritedoor;
//Draw the ramp
float width = 10.0f;
cCritterWall pwall = new cCritterWall(
new cVector3(_border.Hix - width / 2.0f, _border.Loy - 1, _border.Hiz - 2.0f),
new cVector3(_border.Hix - width / 2.0f, _border.Loy + 6, zpos),
width,
cGame3D.WALLTHICKNESS,
this);
cSpriteTextureBox stb = new cSpriteTextureBox(pwall.Skeleton,
BitmapRes.Wood2, 2);
pwall.Sprite = stb;
//draw a platform at the end of the ramp
cCritterWall pPlatform = new cCritterWall(
new cVector3(_border.Hix - _border.XSize / 2.0f, _border.Loy + 6, zpos),
new cVector3(_border.Hix - _border.XSize / 2.0f, _border.Loy + 6, _border.Loz),
_border.XSize,
cGame3D.WALLTHICKNESS,
this);
cSpriteTextureBox pPlatformSprite = new cSpriteTextureBox(pPlatform.Skeleton, BitmapRes.Wall3, 16);
pPlatform.Sprite = pPlatformSprite;
//draw a wall on the lox of the ramp
cCritterWall pRampWall = new cCritterWall(
new cVector3(_border.Hix - width, _border.Midy, _border.Hiz - 3),
new cVector3(_border.Hix - width, _border.Midy, zpos),
cGame3D.WALLTHICKNESS,
_border.YSize,
this);
cSpriteTextureBox pRampWallSprite = new cSpriteTextureBox(pRampWall.Skeleton, BitmapRes.Wall3, 16);
pRampWall.Sprite = pRampWallSprite;
//close off the upstairs room
cCritterWall pUpstairsWall = new cCritterWall(
new cVector3(_border.Hix - width, _border.Midy + 0.35f * _border.YSize, zpos),
new cVector3(_border.Lox, _border.Midy + 0.35f * _border.YSize, zpos),
_border.YSize,
cGame3D.WALLTHICKNESS,
this);
cSpriteTextureBox pUpstairsWallSprite = new cSpriteTextureBox(pUpstairsWall.Skeleton, BitmapRes.Wall3, 16);
pUpstairsWall.Sprite = pUpstairsWallSprite;
cCritter3DCharacterEnemy enemy = new cCritter3DCharacterEnemy(this);
enemy.moveTo(new cVector3(0.0f, -4.0f, 0.0f));
cCritter3DCharacterEnemy enemy2 = new cCritter3DCharacterEnemy(this);
enemy2.moveTo(new cVector3(_border.Midx, _border.Loz + 4, _border.Hiy));
//Insert dragonballs
cCritterDragonball dball3 = new cCritterDragonball(this);
dball3.moveTo(new cVector3(_border.Midx, Border.Loy, _border.Midz));
cCritterDragonball dball4 = new cCritterDragonball(this);
dball4.moveTo(new cVector3(_border.Midx, Border.Midy + 3, _border.Loz + 4));
cCritterDragonball dball5 = new cCritterDragonball(this);
dball5.moveTo(new cVector3(_border.Hix - 2, Border.Loy, _border.Midz - 2));
}
public cGame3D()
{
doorcollision = false;
_menuflags &= ~cGame.MENU_BOUNCEWRAP;
_menuflags |= cGame.MENU_HOPPER; //Turn on hopper listener option.
_spritetype = cGame.ST_MESHSKIN;
setBorder(64.0f, 16.0f, 64.0f); // size of the world
cRealBox3 skeleton = new cRealBox3();
skeleton.copy(_border);
setSkyBox(skeleton);
/* In this world the coordinates are screwed up to match the screwed up
* listener that I use. I should fix the listener and the coords.
* Meanwhile...
* I am flying into the screen from HIZ towards LOZ, and
* LOX below and HIX above and
* LOY on the right and HIY on the left. */
SkyBox.setSideSolidColor(cRealBox3.HIZ, Color.Aqua); //Make the near HIZ transparent
SkyBox.setSideSolidColor(cRealBox3.LOZ, Color.Aqua); //Far wall
SkyBox.setSideSolidColor(cRealBox3.LOX, Color.DarkOrchid); //left wall
SkyBox.setSideTexture(cRealBox3.HIX, BitmapRes.Wall2, 2); //right wall
SkyBox.setSideTexture(cRealBox3.LOY, BitmapRes.Graphics3); //floor
SkyBox.setSideTexture(cRealBox3.HIY, BitmapRes.Sky); //ceiling
WrapFlag = cCritter.BOUNCE;
_seedcount = 7;
setPlayer(new cCritter3DPlayer(this));
_ptreasure = new cCritterTreasure(this);
shape = new cCritterShape(this);
shape.Sprite = new cSphere(3, Color.DarkBlue);
shape.moveTo(new cVector3(Border.Midx, Border.Hiy, Border.Midz));
/* In this world the x and y go left and up respectively, while z comes out of the screen.
* A wall views its "thickness" as in the y direction, which is up here, and its
* "height" as in the z direction, which is into the screen. */
//First draw a wall with dy height resting on the bottom of the world.
float zpos = 0.0f; /* Point on the z axis where we set down the wall. 0 would be center,
* halfway down the hall, but we can offset it if we like. */
float height = 0.1f * _border.YSize;
float ycenter = -_border.YRadius + height / 2.0f;
float wallthickness = cGame3D.WALLTHICKNESS;
cCritterWall pwall = new cCritterWall(
new cVector3(_border.Midx + 2.0f, ycenter, zpos),
new cVector3(_border.Hix, ycenter, zpos),
height, //thickness param for wall's dy which goes perpendicular to the
//baseline established by the frist two args, up the screen
wallthickness, //height argument for this wall's dz goes into the screen
this);
cSpriteTextureBox pspritebox =
new cSpriteTextureBox(pwall.Skeleton, BitmapRes.Wall3, 16); //Sets all sides
/* We'll tile our sprites three times along the long sides, and on the
* short ends, we'll only tile them once, so we reset these two. */
pwall.Sprite = pspritebox;
//Then draw a ramp to the top of the wall. Scoot it over against the right wall.
float planckwidth = 0.75f * height;
pwall = new cCritterWall(
new cVector3(_border.Hix - planckwidth / 2.0f, _border.Loy, _border.Hiz - 2.0f),
new cVector3(_border.Hix - planckwidth / 2.0f, _border.Loy + height, zpos),
planckwidth, //thickness param for wall's dy which is perpenedicualr to the baseline,
//which goes into the screen, so thickness goes to the right
wallthickness, //_border.zradius(), //height argument for wall's dz which goes into the screen
this);
cSpriteTextureBox stb = new cSpriteTextureBox(pwall.Skeleton,
BitmapRes.Wood2, 2);
pwall.Sprite = stb;
cCritterDoor pdwall = new cCritterDoor(
new cVector3(_border.Lox, _border.Loy, _border.Midz),
new cVector3(_border.Lox, _border.Midy - 3, _border.Midz),
0.1f, 2, this);
cSpriteTextureBox pspritedoor =
new cSpriteTextureBox(pdwall.Skeleton, BitmapRes.Door);
pdwall.Sprite = pspritedoor;
}
public void setRoom1( )
{
Biota.purgeCritters("cCritterWall");
Biota.purgeCritters("cCritter3Dcharacter");
Biota.purgeCritters("cCritterBoss");
setBorder(50.0f, 20.0f, 50.0f);
cRealBox3 skeleton = new cRealBox3();
skeleton.copy(_border);
setSkyBox(skeleton);
SkyBox.setAllSidesTexture(BitmapRes.Sky, 2);
SkyBox.setSideTexture(cRealBox3.LOY, BitmapRes.Concrete);
_seedcount = 0;
Player.setMoveBox(new cRealBox3(50.0f, 20.0f, 50.0f));
wentThrough = true;
startNewRoom = Age;
_ptreasure = new cCritterMedpack(this, new cVector3(_border.Midx, _border.Loy + 2.0f,
_border.Midz + 2.0f * cGame3D.TREASURERADIUS));
float rampRaise = 0.5f;
float height = 1.0f;
float width = 10.0f;
// add ramp
cCritterWall pwall = new cCritterWall(
new cVector3(_border.Midx, _border.Loy - rampRaise, _border.Hiz - 3.0f),
new cVector3(_border.Midx, _border.Loy + rampRaise, _border.Hiz - 5.0f),
width, //thickness param for wall's dy which goes perpendicular to the
//baseline established by the frist two args, up the screen
height, //height argument for this wall's dz goes into the screen
this);
cSpriteTextureBox pspritebox =
new cSpriteTextureBox(pwall.Skeleton, BitmapRes.Metal, 16); //Sets all sides
pwall.Sprite = pspritebox;
// add boss platform
pwall = new cCritterWall(
new cVector3(_border.Midx, _border.Loy + rampRaise, _border.Hiz - 5.0f),
new cVector3(_border.Midx, _border.Loy + rampRaise, _border.Loz),
width, //thickness param for wall's dy which goes perpendicular to the
//baseline established by the frist two args, up the screen
height, //height argument for this wall's dz goes into the screen
this);
pspritebox =
new cSpriteTextureBox(pwall.Skeleton, BitmapRes.Metal, 16); //Sets all sides
pwall.Sprite = pspritebox;
// add door
cCritterDoor pdwall = new cCritterDoor(
new cVector3(_border.Midx, _border.Loy + rampRaise, _border.Loz),
new cVector3(_border.Midx, _border.Midy - 3 + rampRaise, _border.Loz),
2.0f, 2, this);
cSpriteTextureBox pspritedoor =
new cSpriteTextureBox(pdwall.Skeleton, BitmapRes.Door);
pdwall.Sprite = pspritedoor;
seedCritters();
new cCritterBossMog(this, new cVector3(_border.Midx, _border.Loy + rampRaise, _border.Loz), new PulseBullet());
}
public void setRoom2()
{
Biota.purgeCritters("cCritterWall");
Biota.purgeCritters("cCritter3Dcharacter");
Biota.purgeCritters("cCritterBoss");
setBorder(50.0f, 40.0f, 50.0f);
cRealBox3 skeleton = new cRealBox3();
skeleton.copy(_border);
setSkyBox(skeleton);
SkyBox.setAllSidesTexture(BitmapRes.Graphics1, 2);
SkyBox.setSideTexture(cRealBox3.LOY, BitmapRes.Concrete);
SkyBox.setSideSolidColor(cRealBox3.HIY, Color.Blue);
_seedcount = 0;
Player.setMoveBox(new cRealBox3(50.0f, 40.0f, 50.0f));
wentThrough = true;
startNewRoom = Age;
//add door
cCritterDoor pdwall = new cCritterDoor(new cVector3(_border.Midx, _border.Loy + 4, _border.Loz), new cVector3(_border.Midx, _border.Loy + 10, _border.Loz), 2.0f, 3.0f, this);
cSpriteTextureBox pspritedoor = new cSpriteTextureBox(pdwall.Skeleton, BitmapRes.Door);
pdwall.Sprite = pspritedoor;
float wallThickness = 5.0f, wallHeight = 10.0f;
//starting block
cVector3 enda = new cVector3(Border.Midx, Border.Loy + 1, Border.Hiz);
cVector3 endb = new cVector3(Border.Midx, Border.Loy + 1, Border.Hiz - 5);
cCritterWall startingBlock = new cCritterWall(enda, endb, wallThickness, wallHeight, this);
cSpriteTextureBox pspritebox =
new cSpriteTextureBox(startingBlock.Skeleton, BitmapRes.Wood2, 16); //Sets all sides
startingBlock.Sprite = pspritebox;
//ending block
cVector3 enda2 = new cVector3(Border.Midx, Border.Loy + 1, Border.Loz + 7);
cVector3 endb2 = new cVector3(Border.Midx, Border.Loy + 1, Border.Loz);
cCritterWall endBlock = new cCritterWall(enda2, endb2, wallThickness, 8.0f, this);
cSpriteTextureBox pspritebox2 =
new cSpriteTextureBox(endBlock.Skeleton, BitmapRes.Wood2, 16); //Sets all sides
endBlock.Sprite = pspritebox2;
//floor
cVector3 enda3 = new cVector3(Border.Midx, Border.Loy, Border.Loz);
cVector3 endb3 = new cVector3(Border.Midx, Border.Loy, Border.Hiz);
DamagingWall floor = new DamagingWall(enda3, endb3, 0.5f, 0.5f, this);
//med pack
_ptreasure = new cCritterMedpack(this, new cVector3(Border.Midx, Border.Loy + 7, Border.Hiz - 4));
//sliding walls (spawned based on pos of starting block)
cVector3 leftEnd = new cVector3();
leftEnd.addassign(startingBlock.Position.add(new cVector3(0, 4.0f, -0.5f)));
cVector3 rightEnd = new cVector3();
rightEnd.copy(leftEnd);
rightEnd.addassign(new cVector3(0, 0, -5.0f));
float thickness = 0.1f, height = 0.3f;
cVector3 moveAxisandDirection = new cVector3(0, 0, -0.005f);
cVector3 startPos = new cVector3();
startPos.copy(rightEnd);
cVector3 endPos = new cVector3();
endPos.copy(startPos);
endPos.Z = Border.Loz + 9.5f;
//spawn sliding walls in a separate thread
new Thread(() =>
spawnWall(leftEnd, rightEnd, thickness, height, this, cCritterSlideWall.TYPE.PLATFORM, moveAxisandDirection, false, startPos, endPos)).Start();
seedCritters();
Player.moveTo(startingBlock.Position.add(new cVector3(0, 10.0f, 0)));
new cCritterBossDrFreak(this, endBlock.Position.add(new cVector3(0, 10.0f, 0)), new KnockbackBullet(), 5);
}
public cRoom(cGame3D game, int room = 1)
{
this.game = game;
game.Biota.purgeCritters <cCritterWall>();
game.Biota.purgeCritters <cCritter3Dcharacter>();
game.Biota.purgeCritters <cCritterShape>();
doorcollision = false;
int roomSize = 100;
if (room == 1)
{
Room1();
}
if (room == 2)
{
Room2();
}
if (room == 3)
{
Room3();
}
game.setBorder(roomSize, 16.0f, roomSize); // size of the world
cRealBox3 skeleton = new cRealBox3();
skeleton.copy(game.Border);
game.setSkyBox(skeleton);
game.SkyBox.setSideSolidColor(cRealBox3.HIZ, Color.Green); //Make the near HIZ transparent
game.SkyBox.setSideSolidColor(cRealBox3.LOZ, Color.Green); //Far wall
game.SkyBox.setSideSolidColor(cRealBox3.LOX, Color.DarkOrchid); //left wall
game.SkyBox.setSideTexture(cRealBox3.HIX, BitmapRes.Wall2, 2); //right wall
game.SkyBox.setSideTexture(cRealBox3.LOY, BitmapRes.Graphics3); //floor
game.SkyBox.setSideTexture(cRealBox3.HIY, BitmapRes.Sky); //ceiling
width = roomSize / mazePlanx.Count;
for (int i = 0; i < mazePlanx.Count; i++)
{
for (int j = 0; j < mazePlanx.Count; j++)
{
if (mazePlanx[i][j])
{
float height = 0.3f * game.Border.YSize;
float ycenter = -game.Border.YRadius + height / 2.0f;
float wallthickness = cGame3D.WALLTHICKNESS;
cCritterWall pwall = new cCritterWall(
new cVector3(game.Border.Hix - (width * j), ycenter, game.Border.Hiz - (width * i)),
new cVector3(game.Border.Hix - (width * (j + 1)), ycenter, game.Border.Hiz - (width * i)),
height, //thickness param for wall's dy which goes perpendicular to the
//baseline established by the frist two args, up the screen
wallthickness, //height argument for this wall's dz goes into the screen
game);
cSpriteTextureBox pspritebox =
new cSpriteTextureBox(pwall.Skeleton, BitmapRes.Wall3, 16); //Sets all sides
pwall.Sprite = pspritebox;
}
}
}
for (int i = 0; i < mazePlanx.Count; i++)
{
for (int j = 0; j < mazePlanx.Count; j++)
{
if (mazePlanz[i][j])
{
float height = 0.3f * game.Border.YSize;
float ycenter = -game.Border.YRadius + height / 2.0f;
float wallthickness = cGame3D.WALLTHICKNESS;
cCritterWall pwall = new cCritterWall(
new cVector3(game.Border.Hix - (width * i), ycenter, game.Border.Hiz - (width * j)),
new cVector3(game.Border.Hix - (width * i), ycenter, game.Border.Hiz - (width * (j + 1))),
wallthickness, //thickness param for wall's dy which goes perpendicular to the
//baseline established by the frist two args, up the screen
height, //height argument for this wall's dz goes into the screen
game);
cSpriteTextureBox pspritebox =
new cSpriteTextureBox(pwall.Skeleton, BitmapRes.Wall3, 16); //Sets all sides
pwall.Sprite = pspritebox;
}
}
}
}
public cGame3D()
{
doorcollision = false;
_menuflags &= ~cGame.MENU_BOUNCEWRAP;
_menuflags |= cGame.MENU_HOPPER; //Turn on hopper listener option.
_spritetype = cGame.ST_MESHSKIN;
setBorder(BORDER_XZ, BORDER_Y, BORDER_XZ); // size of the world
cRealBox3 skeleton = new cRealBox3();
skeleton.copy(_border);
setSkyBox(skeleton);
shouldMoveWall = false;
/* In this world the coordinates are screwed up to match the screwed up
* listener that I use. I should fix the listener and the coords.
* Meanwhile...
* I am flying into the screen from HIZ towards LOZ, and
* LOX below and HIX above and
* LOY on the right and HIY on the left. */
SkyBox.setSideTexture(cRealBox3.HIY, BitmapRes.Sky); //ceiling
SkyBox.setSideTexture(cRealBox3.LOY, BitmapRes.Concrete); //floor
SkyBox.setSideTexture(cRealBox3.LOX, BitmapRes.Dragonball_bg1_90r); //Left Wall - flip 90r
SkyBox.setSideTexture(cRealBox3.HIX, BitmapRes.Dragonball_bg1_90r); //Right Wall -flip 90l
SkyBox.setSideTexture(cRealBox3.HIZ, BitmapRes.Dragonball_bg1); //Front Wall
SkyBox.setSideTexture(cRealBox3.LOZ, BitmapRes.Dragonball_bg1); //Back Wall
WrapFlag = cCritter.BOUNCE;
_seedcount = 0;
setPlayer(new cCritter3DPlayer(this));
/* In this world the x and y go left and up respectively, while z comes out of the screen.
* A wall views its "thickness" as in the y direction, which is up here, and its
* "height" as in the z direction, which is into the screen. */
//First draw a wall with dy height resting on the bottom of the world.
float zpos = 0.0f; /* Point on the z axis where we set down the wall. 0 would be center,
* halfway down the hall, but we can offset it if we like. */
float height = _border.YSize;
float ycenter = -_border.YRadius + height / 2.0f;
float wallthickness = cGame3D.WALLTHICKNESS;
cCritterWall pwall = new cCritterWall(
new cVector3(_border.Midx + 10.0f, ycenter, zpos - 12),
new cVector3(_border.Hix, ycenter, zpos - 12),
height, //thickness param for wall's dy which goes perpendicular to the
//baseline established by the frist two args, up the screen
wallthickness, //height argument for this wall's dz goes into the screen
this);
cSpriteTextureBox pspritebox =
new cSpriteTextureBox(pwall.Skeleton, BitmapRes.Wall3, 16); //Sets all sides
/* We'll tile our sprites three times along the long sides, and on the
* short ends, we'll only tile them once, so we reset these two.*/
pwall.Sprite = pspritebox;
cCritterWall pNEWall = new cCritterWall(
new cVector3(_border.Midx + 10.0f, _border.Midy, zpos - 17),
new cVector3(_border.Midx + 10.0f, _border.Midy, _border.Loz),
wallthickness,
height,
this);
cSpriteTextureBox pNEWallSprite = new cSpriteTextureBox(pNEWall.Skeleton, BitmapRes.Wall3, 16);
pNEWall.Sprite = pNEWallSprite;
cCritterDoor pdwall = new cCritterDoor(
new cVector3(_border.Midx, _border.Loy, _border.Loz - 0.9f),
new cVector3(_border.Midx, _border.Midy, _border.Loz - 0.9f),
5.0f, 2, this);
cSpriteTextureBox pspritedoor =
new cSpriteTextureBox(pdwall.Skeleton, BitmapRes.Door);
pdwall.Sprite = pspritedoor;
cCritterWank wank = new cCritterWank(this);
wank.moveTo(new cVector3(_border.Hix - 4.0f, 0.0f, _border.Loz + 4.0f));
cCritter3DCharacterEnemy enemy_1 = new cCritter3DCharacterEnemy(this);
enemy_1.moveTo(new cVector3(_border.Hix - 3.0f, _border.Midy + 3.0f, _border.Loz + 10.0f));
cCritterDragonball dball1 = new cCritterDragonball(this);
dball1.moveTo(new cVector3(_border.Midx, Border.Loy, _border.Midz));
cCritterDragonball dball2 = new cCritterDragonball(this);
dball2.moveTo(new cVector3(_border.Hix - 6, Border.Loy, _border.Loz + 6));
}