public void InitializeCAN()
{
XL_Status status;
// Open XL Driver
status = CANDriver.XL_OpenDriver();
status = CANDriver.XL_GetDriverConfig(ref driverConfig);
while (!GetAppChannelAndTestIsOk(1, ref txMask, ref txCi) || !GetAppChannelAndTestIsOk(0, ref rxMask, ref rxCi))
{
PrintAssignErrorAndPopupHwConf();
}
accessMask = txMask | rxMask;
permissionMask = accessMask;
// Open port
status = CANDriver.XL_OpenPort(ref portHandle, appName, accessMask, ref permissionMask, 1024, XLDefine.XL_InterfaceVersion.XL_INTERFACE_VERSION, XLDefine.XL_BusTypes.XL_BUS_TYPE_CAN);
Console.WriteLine("\n\nOpen Port : " + status);
if (status != XL_Status.XL_SUCCESS)
{
PrintFunctionError();
}
// Check port
status = CANDriver.XL_CanRequestChipState(portHandle, accessMask);
Console.WriteLine("Can Request Chip State: " + status);
if (status != XL_Status.XL_SUCCESS)
{
PrintFunctionError();
}
// Activate channel
status = CANDriver.XL_ActivateChannel(portHandle, accessMask, XLDefine.XL_BusTypes.XL_BUS_TYPE_CAN, XLDefine.XL_AC_Flags.XL_ACTIVATE_NONE);
Console.WriteLine("Activate Channel : " + status);
if (status != XL_Status.XL_SUCCESS)
{
PrintFunctionError();
}
Console.WriteLine("Set Notification : " + status);
if (status != XL_Status.XL_SUCCESS)
{
PrintFunctionError();
}
status = CANDriver.XL_ResetClock(portHandle);
Console.WriteLine("Reset Clock : " + status + "\n\n");
if (status != XL_Status.XL_SUCCESS)
{
PrintFunctionError();
}
}
public bool OpenDriver()
{
status = CANDriver.XL_OpenDriver();
info += "Open Driver : ";
if (status == XLDefine.XL_Status.XL_SUCCESS)
{
info += "Succesfull\n";
status = CANDriver.XL_GetDriverConfig(ref driverConfig);
info += "DLL Version : " + CANDriver.VersionToString(driverConfig.dllVersion) + "\n" +
"Channels found : " + driverConfig.channelCount + "\n";
for (int i = 0; i < driverConfig.channelCount; i++)
{
info += " " + driverConfig.channel[i].name + "\n";
if ((driverConfig.channel[i].channelCapabilities & XLDefine.XL_ChannelCapabilities.XL_CHANNEL_FLAG_CANFD_ISO_SUPPORT) == XLDefine.XL_ChannelCapabilities.XL_CHANNEL_FLAG_CANFD_ISO_SUPPORT)
{
info += " - CAN FD Support : yes\n";
}
else
{
info += " - CAN FD Support : no\n";
}
info += " - Channel Mask : " + driverConfig.channel[i].channelMask + "\n";
info += " - Transceiver Name: " + driverConfig.channel[i].transceiverName + "\n";
info += " - Serial Number: " + driverConfig.channel[i].serialNumber + "\n";
}
// If the application name cannot be found in VCANCONF...
if ((CANDriver.XL_GetApplConfig(appName, 0, ref hwType, ref hwIndex, ref hwChannel, XLDefine.XL_BusTypes.XL_BUS_TYPE_CAN) != XLDefine.XL_Status.XL_SUCCESS) ||
(CANDriver.XL_GetApplConfig(appName, 1, ref hwType, ref hwIndex, ref hwChannel, XLDefine.XL_BusTypes.XL_BUS_TYPE_CAN) != XLDefine.XL_Status.XL_SUCCESS))
{
//...create the item with two CAN channels
CANDriver.XL_SetApplConfig(appName, 0, XLDefine.XL_HardwareType.XL_HWTYPE_NONE, 0, 0, XLDefine.XL_BusTypes.XL_BUS_TYPE_CAN);
CANDriver.XL_SetApplConfig(appName, 1, XLDefine.XL_HardwareType.XL_HWTYPE_NONE, 0, 0, XLDefine.XL_BusTypes.XL_BUS_TYPE_CAN);
CANDriver.XL_PopupHwConfig();
}
accessMask = txMask | rxMask;
permissionMask = accessMask;
return(true);
}
else
{
info += "NOT Succesfull\n";
return(false);
}
}
public long CanTpCreateConnection(string appName, uint appChannel, XLDefine.XL_HardwareType hwType, uint hwIndex, uint hwChannel, XLDefine.XL_BusTypes busType)
{
XLDefine.XL_Status status;
status = CANTPDriver.XL_OpenDriver();
Console.WriteLine("Open Driver : " + status);
if (status != XLDefine.XL_Status.XL_SUCCESS)
{
return(-1);
}
status = CANTPDriver.XL_SetApplConfig(appName, appChannel, hwType, hwIndex, hwChannel, busType);
Console.WriteLine("SetApplConfig : " + status);
if (status != XLDefine.XL_Status.XL_SUCCESS)
{
return(-2);
}
accessMask = CANTPDriver.XL_GetChannelMask(hwType, (int)hwIndex, (int)hwChannel);
permissionMask = accessMask;
txMask = accessMask;
status = CANTPDriver.XL_OpenPort(ref portHandle, appName, accessMask, ref permissionMask, 1024, XLDefine.XL_InterfaceVersion.XL_INTERFACE_VERSION, XLDefine.XL_BusTypes.XL_BUS_TYPE_CAN);
Console.WriteLine("Open Port : " + status);
if (status != XLDefine.XL_Status.XL_SUCCESS)
{
return(-3);
}
status = CANTPDriver.XL_CanRequestChipState(portHandle, accessMask);
Console.WriteLine("Can Request Chip State: " + status);
if (status != XLDefine.XL_Status.XL_SUCCESS)
{
return(-4);
}
status = CANTPDriver.XL_ActivateChannel(portHandle, accessMask, XLDefine.XL_BusTypes.XL_BUS_TYPE_CAN, XLDefine.XL_AC_Flags.XL_ACTIVATE_NONE);
Console.WriteLine("Activate Channel : " + status);
if (status != XLDefine.XL_Status.XL_SUCCESS)
{
return(-5);
}
status = CANTPDriver.XL_SetNotification(portHandle, ref eventHandle, 1);
Console.WriteLine("Set Notification : " + status);
if (status != XLDefine.XL_Status.XL_SUCCESS)
{
return(-6);
}
status = CANTPDriver.XL_ResetClock(portHandle);
Console.WriteLine("Reset Clock : " + status + "\n\n");
if (status != XLDefine.XL_Status.XL_SUCCESS)
{
return(-7);
}
Console.WriteLine("Start Rx thread...");
rxThread = new Thread(new ThreadStart(CanTp_ReceptionInd));
rxThread.Start();
return(0);
}
public void INITLOG()
{
//starting app
Console.WriteLine("UDS- Vector Client Started \n");
Console.WriteLine("Vector XL Driver Version: " + typeof(XLDriver).Assembly.GetName().Version + "\n");
//opening driver
status = UDSDemo.XL_OpenDriver();
Console.WriteLine("Opening vector CAN Driver.... \n");
if (status != XLDefine.XL_Status.XL_SUCCESS)
{
PrintFunctionError();
}
status = UDSDemo.XL_GetDriverConfig(ref driverConfig);
//getting config
Console.WriteLine("Getting CAN Driver Config: \n");
Console.WriteLine(status + Environment.NewLine);
if (status != XLDefine.XL_Status.XL_SUCCESS)
{
PrintFunctionError();
}
//getting DLL info
Console.WriteLine("Getting Vector DLL Version: ");
Console.WriteLine(UDSDemo.VersionToString(driverConfig.dllVersion) + Environment.NewLine);
//Getting channels...
Console.WriteLine("Channels found: " + driverConfig.channelCount + Environment.NewLine);
for (int i = 0; i < driverConfig.channelCount; i++)
{
Console.WriteLine(" Channel Name:" + driverConfig.channel[i].name);
Console.WriteLine(" Channel Mask:" + driverConfig.channel[i].channelMask);
Console.WriteLine(" Transceiver Name:" + driverConfig.channel[i].transceiverName);
Console.WriteLine(" Serial Number:" + driverConfig.channel[i].serialNumber);
Console.WriteLine("\n\n");
}
//Check config
if ((UDSDemo.XL_GetApplConfig(appName, 0, ref hwType, ref hwIndex, ref hwChannel, XLDefine.XL_BusTypes.XL_BUS_TYPE_CAN) != XLDefine.XL_Status.XL_SUCCESS) ||
(UDSDemo.XL_GetApplConfig(appName, 1, ref hwType, ref hwIndex, ref hwChannel, XLDefine.XL_BusTypes.XL_BUS_TYPE_CAN) != XLDefine.XL_Status.XL_SUCCESS))
{
//...create the item with two CAN channels
UDSDemo.XL_SetApplConfig(appName, 0, XLDefine.XL_HardwareType.XL_HWTYPE_NONE, 0, 0, XLDefine.XL_BusTypes.XL_BUS_TYPE_CAN);
UDSDemo.XL_SetApplConfig(appName, 1, XLDefine.XL_HardwareType.XL_HWTYPE_NONE, 0, 0, XLDefine.XL_BusTypes.XL_BUS_TYPE_CAN);
//PrintAssignErrorAndPopupHwConf();
ThreadMutex = 1;
}
// Request the user to assign channels until both CAN1 (Tx) and CAN2 (Rx) are assigned to usable channels
if (!GetAppChannelAndTestIsOk(0, ref txMask, ref txCi) || !GetAppChannelAndTestIsOk(1, ref rxMask, ref rxCi))
{
ThreadMutex = 0;
}
//Printing application configuration on log screen
//PrintConfig();
//making masks
accessMask = txMask | rxMask;
permissionMask = accessMask;
//opening port
status = UDSDemo.XL_OpenPort(ref portHandle, appName, accessMask, ref permissionMask, 1024, XLDefine.XL_InterfaceVersion.XL_INTERFACE_VERSION, XLDefine.XL_BusTypes.XL_BUS_TYPE_CAN);
Console.WriteLine("Open Port :" + status + Environment.NewLine);
if (status != XLDefine.XL_Status.XL_SUCCESS)
{
PrintFunctionError();
}
//chip state checking
status = UDSDemo.XL_CanRequestChipState(portHandle, accessMask);
Console.WriteLine("CAN Request Chip state :" + status + Environment.NewLine);
if (status != XLDefine.XL_Status.XL_SUCCESS)
{
PrintFunctionError();
}
//ON Bus
status = UDSDemo.XL_ActivateChannel(portHandle, accessMask, XLDefine.XL_BusTypes.XL_BUS_TYPE_CAN, XLDefine.XL_AC_Flags.XL_ACTIVATE_NONE);
Console.WriteLine("Activate Channel :" + status + Environment.NewLine);
if (status != XLDefine.XL_Status.XL_SUCCESS)
{
PrintFunctionError();
}
//can ids display
Console.WriteLine("TESTER REQUEST CAN ID: 0x735" + Environment.NewLine);
Console.WriteLine("ECU RESPONSE CAN ID: 0x73D" + Environment.NewLine);
//giving info
//putting notifications on can
int tempInt = -1;
status = UDSDemo.XL_SetNotification(portHandle, ref tempInt, 1);
xlEvWaitHandle.SafeWaitHandle = new SafeWaitHandle(new IntPtr(tempInt), true);
Console.WriteLine("Set Notification :" + status + Environment.NewLine);
if (status != XLDefine.XL_Status.XL_SUCCESS)
{
PrintFunctionError();
}
if (TimerRate == 1)
{
TimerRate = 0;
}
else
{
TimerRate = 20000;
}
status = UDSDemo.XL_SetTimerRate(portHandle, TimerRate);
Console.WriteLine("setTimer :" + status + Environment.NewLine);
//resetting clock
status = UDSDemo.XL_ResetClock(portHandle);
Console.WriteLine("Reset Clock :" + status + Environment.NewLine);
if (status != XLDefine.XL_Status.XL_SUCCESS)
{
PrintFunctionError();
}
//TPLOCK = 1;
Console.ForegroundColor = ConsoleColor.Green;
Console.WriteLine("\nDevice Connected " + driverConfig.channel[0].name + " and " + driverConfig.channel[1].name + " active\n");
Console.ForegroundColor = ConsoleColor.White;
//starting rx thread
Console.WriteLine("Starting Receive Thread........" + Environment.NewLine);
rxThread = new Thread(new ThreadStart(RXHANDLER));
rxThread.Start();
Console.WriteLine("Is main thread is alive" +
" ? : {0}", rxThread.IsAlive);
}
bool OpenDriver()
{
XLDefine.XL_Status status = driver.XL_OpenDriver();
return(DriverAction("Open driver", status));
}
// -----------------------------------------------------------------------------------------------
/// <summary>
/// MAIN
///
/// Sends and receives CAN messages using main methods of the "XLDriver" class.
/// This demo requires two connected CAN channels (Vector network interface).
/// The configuration is read from Vector Hardware Config (vcanconf.exe).
/// </summary>
// -----------------------------------------------------------------------------------------------
//[STAThread]
public String InitCANtransmitter()
{
// Open XL Driver
status = CANDemo.XL_OpenDriver();
//Console.WriteLine("Open Driver : " + status);
//if (status != XLDefine.XL_Status.XL_SUCCESS) PrintFunctionError();
// Get XL Driver configuration
status = CANDemo.XL_GetDriverConfig(ref driverConfig);
//Console.WriteLine("Get Driver Config : " + status);
//if (status != XLDefine.XL_Status.XL_SUCCESS) PrintFunctionError();
// If the application name cannot be found in VCANCONF...
if ((CANDemo.XL_GetApplConfig(appName, 0, ref hwType, ref hwIndex, ref hwChannel, XLDefine.XL_BusTypes.XL_BUS_TYPE_CAN) != XLDefine.XL_Status.XL_SUCCESS) ||
(CANDemo.XL_GetApplConfig(appName, 1, ref hwType, ref hwIndex, ref hwChannel, XLDefine.XL_BusTypes.XL_BUS_TYPE_CAN) != XLDefine.XL_Status.XL_SUCCESS))
{
//...create the item with two CAN channels
CANDemo.XL_SetApplConfig(appName, 0, XLDefine.XL_HardwareType.XL_HWTYPE_NONE, 0, 0, XLDefine.XL_BusTypes.XL_BUS_TYPE_CAN);
CANDemo.XL_SetApplConfig(appName, 1, XLDefine.XL_HardwareType.XL_HWTYPE_NONE, 0, 0, XLDefine.XL_BusTypes.XL_BUS_TYPE_CAN);
PrintAssignError();
}
else // else try to read channel assignments
{
string str;
// Read setting of CAN1
CANDemo.XL_GetApplConfig(appName, 0, ref hwType, ref hwIndex, ref hwChannel, XLDefine.XL_BusTypes.XL_BUS_TYPE_CAN);
// Notify user if no channel is assigned to this application
if (hwType == XLDefine.XL_HardwareType.XL_HWTYPE_NONE)
{
PrintAssignError();
}
accessMask = CANDemo.XL_GetChannelMask(hwType, (int)hwIndex, (int)hwChannel);
txMask = accessMask; // this channel is used for Tx
/*
* // Read setting of CAN2
* CANDemo.XL_GetApplConfig(appName, 1, ref hwType, ref hwIndex, ref hwChannel, XLDefine.XL_BusTypes.XL_BUS_TYPE_CAN);
*
* // Notify user if no channel is assigned to this application
* if (hwType == XLDefine.XL_HardwareType.XL_HWTYPE_NONE) PrintAssignError();
*
* accessMask |= CANDemo.XL_GetChannelMask(hwType, (int)hwIndex, (int)hwChannel); // OR: access both channels for RX later
*/
permissionMask = accessMask;
// Open port
status = CANDemo.XL_OpenPort(ref portHandle, appName, accessMask, ref permissionMask, 1024, XLDefine.XL_InterfaceVersion.XL_INTERFACE_VERSION, XLDefine.XL_BusTypes.XL_BUS_TYPE_CAN);
//Console.WriteLine("\n\nOpen Port : " + status);
//if (status != XLDefine.XL_Status.XL_SUCCESS) PrintFunctionError();
// Check port
status = CANDemo.XL_CanRequestChipState(portHandle, accessMask);
//Console.WriteLine("Can Request Chip State: " + status);
//if (status != XLDefine.XL_Status.XL_SUCCESS) PrintFunctionError();
// Activate channel
status = CANDemo.XL_ActivateChannel(portHandle, accessMask, XLDefine.XL_BusTypes.XL_BUS_TYPE_CAN, XLDefine.XL_AC_Flags.XL_ACTIVATE_NONE);
//Console.WriteLine("Activate Channel : " + status);
//if (status != XLDefine.XL_Status.XL_SUCCESS) PrintFunctionError();
// Get RX event handle
status = CANDemo.XL_SetNotification(portHandle, ref eventHandle, 1);
//Console.WriteLine("Set Notification : " + status);
//if (status != XLDefine.XL_Status.XL_SUCCESS) PrintFunctionError();
// Reset time stamp clock
CANDemo.XL_ResetClock(portHandle);
//Console.WriteLine("Reset Clock : " + status + "\n\n");
//if (status != XLDefine.XL_Status.XL_SUCCESS) PrintFunctionError();
}
return(status.ToString());
}