public DataResult Data(DataCommand command)
{
if (command.Period == default)
{
throw new Exception("Missing parameter: Period");
}
if (command.Period.Day != 1)
{
throw new Exception("Period must be the first day of the month.");
}
var startedAt = DateTime.Now;
using (var conn = NewConnection())
{
conn.Open();
WriteToolDataResult writeToolDataProcessResult = null;
WriteRoomDataResult writeRoomDataProcessResult = null;
WriteStoreDataResult writeStoreDataProcessResult = null;
if ((command.BillingCategory & BillingCategory.Tool) > 0)
{
writeToolDataProcessResult = new WriteToolDataProcess(WriteToolDataConfig.Create(conn, "ProcessRepository.Data", command.Period, command.ClientID, command.Record, Cost.GetToolCosts(command.Period, command.Record))).Start();
}
if ((command.BillingCategory & BillingCategory.Room) > 0)
{
writeRoomDataProcessResult = new WriteRoomDataProcess(new WriteRoomDataConfig {
Connection = conn, Context = "ProcessRepository.Data", Period = command.Period, ClientID = command.ClientID, RoomID = command.Record
}).Start();
}
if ((command.BillingCategory & BillingCategory.Store) > 0)
{
writeStoreDataProcessResult = new WriteStoreDataProcess(new WriteStoreDataConfig {
Connection = conn, Context = "ProcessRepository.Data", Period = command.Period, ClientID = command.ClientID, ItemID = command.Record
}).Start();
}
conn.Close();
DataResult result = new DataResult(startedAt)
{
WriteToolDataProcessResult = writeToolDataProcessResult,
WriteRoomDataProcessResult = writeRoomDataProcessResult,
WriteStoreDataProcessResult = writeStoreDataProcessResult
};
return(result);
}
}
public UpdateResult Update(UpdateCommand command)
{
if (command.Period == default)
{
throw new Exception("Missing parameter: Period");
}
if (command.Period.Day != 1)
{
throw new Exception("Period must be the first day of the month.");
}
var startedAt = DateTime.Now;
using (var conn = NewConnection())
{
conn.Open();
var types = command.BillingTypes.ToString().Split(',').Select(x => x.Trim()).ToArray();
// types should be {"Tool", "Room", "Store"} for example
WriteToolDataCleanResult writeToolDataCleanProcessResult = null;
WriteRoomDataCleanResult writeRoomDataCleanProcessResult = null;
WriteStoreDataCleanResult writeStoreDataCleanProcessResult = null;
WriteToolDataResult writeToolDataProcessResult = null;
WriteRoomDataResult writeRoomDataProcessResult = null;
WriteStoreDataResult writeStoreDataProcessResult = null;
string error = null;
foreach (string t in types)
{
//Clean data always first, then final data
string[] dTypes = null;
switch (command.UpdateTypes)
{
case UpdateDataType.DataClean:
dTypes = new string[] { "Clean" };
break;
case UpdateDataType.Data:
dTypes = new string[] { "" };
break;
case UpdateDataType.DataClean | UpdateDataType.Data:
dTypes = new string[] { "Clean", "" };
break;
}
foreach (string dType in dTypes)
{
DateTime sd;
DateTime ed;
string dataType = $"{t}Data{dType}"; //e.g. StoreData, StoreDataClean OR RoomData, RoomDataClean
string funcName = $"Write{dataType}"; //e.g. WriteStoreData, WriteStoreDataClean OR WriteRoomData, WriteRoomDataClean
DateTime fom = command.Period.FirstOfMonth();
//always do clean first (called from within the select)
if (dType == "Clean")
{
//This stored procedure will delete all records that are of today (i.e. 00:00:00 of current day)
//and will return the max date after the deletion (so the return date should be yesterday)
string procName = $"dbo.{dataType}_Select";
var lastUpdate = GetLastUpdate(conn, procName, command.ClientID);
/*
* For tool: lastUpdate is the last BeginDateTime in ToolDataClean after deleteing all records in this way:
*
* SET @eDate = CONVERT(datetime, CONVERT(nvarchar(10), GETDATE(), 120)) -- 00:00:00 of current day
*
* DELETE dbo.ToolDataClean -- allows multiple queries in the same day
* WHERE BeginDateTime >= @eDate OR ActualBeginDateTime >= @eDate
*/
if (lastUpdate == default)
{
throw new Exception($"Cannot get lastUpdate from {procName}");
}
// sd is which ever is earlier: previousDay or lastUpdate
sd = lastUpdate < fom ? lastUpdate : fom;
ed = fom.AddMonths(1).Date;
}
else
{
// For Data always import the whole period.
sd = fom;
ed = sd.AddMonths(1);
}
// At this point ed is always 1 month after period (the arg passed to this method). For Data,
// sd will always be period. For DataClean sd will either be period or the last date currently
// found in the Clean table, whichever is earliest.
// No looping is necessary because for Clean the methods take a start and end date, and for Data
// we always use period (the arg passed to this method). Assuming DataClean works, there will be
// something to import into Data.
try
{
switch (funcName)
{
case "WriteToolDataClean":
writeToolDataCleanProcessResult = new WriteToolDataCleanProcess(new WriteToolDataCleanConfig {
Connection = conn, Context = "ProcessRepository.Update", StartDate = sd, EndDate = ed, ClientID = command.ClientID
}).Start();
break;
case "WriteToolData":
writeToolDataProcessResult = new WriteToolDataProcess(WriteToolDataConfig.Create(conn, "ProcessRepository.Update", sd, command.ClientID, 0, Cost.GetToolCosts(sd, 0))).Start();
break;
case "WriteRoomDataClean":
writeRoomDataCleanProcessResult = new WriteRoomDataCleanProcess(new WriteRoomDataCleanConfig {
Connection = conn, Context = "ProcessRepository.Update", StartDate = sd, EndDate = ed, ClientID = command.ClientID
}).Start();
break;
case "WriteRoomData":
writeRoomDataProcessResult = new WriteRoomDataProcess(new WriteRoomDataConfig {
Connection = conn, Context = "ProcessRepository.Update", Period = sd, ClientID = command.ClientID, RoomID = 0
}).Start();
break;
case "WriteStoreDataClean":
writeStoreDataCleanProcessResult = new WriteStoreDataCleanProcess(new WriteStoreDataCleanConfig {
Connection = conn, Context = "ProcessRepository.Update", StartDate = sd, EndDate = ed, ClientID = command.ClientID
}).Start();
break;
case "WriteStoreData":
writeStoreDataProcessResult = new WriteStoreDataProcess(new WriteStoreDataConfig {
Connection = conn, Context = "ProcessRepository.Update", Period = sd, ClientID = command.ClientID, ItemID = 0
}).Start();
break;
}
}
catch (Exception ex)
{
// [2010-02-03] Test code to track who calls this function
// [2016-09-28 jg] Only call when there's an error
error = $"[{DateTime.Now:yyyy-MM-dd HH:mm:ss}] function = {funcName}, ClientID = {command.ClientID}, sd = {sd}, ed = {ed}"
+ Environment.NewLine + Environment.NewLine + ex.ToString();
string subj = $"Call from LNF.CommonTools.WriteData.UpdateTables [{t + dType}] [{DateTime.Now:yyyy-MM-dd HH:mm:ss}]";
SendEmail.SendDeveloperEmail("LNF.CommonTools.WriteData.UpdateTables", subj, error);
}
}
}
conn.Close();
var result = new UpdateResult(startedAt)
{
BillingTypes = command.BillingTypes,
UpdateTypes = command.UpdateTypes,
Period = command.Period,
ClientID = command.ClientID,
WriteToolDataCleanProcessResult = writeToolDataCleanProcessResult,
WriteRoomDataCleanProcessResult = writeRoomDataCleanProcessResult,
WriteStoreDataCleanProcessResult = writeStoreDataCleanProcessResult,
WriteToolDataProcessResult = writeToolDataProcessResult,
WriteRoomDataProcessResult = writeRoomDataProcessResult,
WriteStoreDataProcessResult = writeStoreDataProcessResult,
Error = error
};
return(result);
}
}
