/// <summary>
/// ctor for the operator factory, where the equation compnents are set
/// </summary>
/// <param name="_config"></param>
/// <param name="_LsTrk"></param>
/// <param name="_HMFdegree"></param>
/// <param name="BcMap"></param>
/// <param name="thermBcMap"></param>
/// <param name="degU"></param>
public XNSFE_OperatorFactory(XNSFE_OperatorConfiguration _config, LevelSetTracker _LsTrk, int _HMFdegree,
IncompressibleMultiphaseBoundaryCondMap BcMap, ThermalMultiphaseBoundaryCondMap thermBcMap, int degU, IDictionary <SpeciesId, IEnumerable <double> > MassScale)
{
this.config = _config;
this.LsTrk = _LsTrk;
this.D = _LsTrk.GridDat.SpatialDimension;
this.HMFDegree = _HMFdegree;
this.physParams = config.getPhysParams;
this.thermParams = config.getThermParams;
this.dntParams = config.getDntParams;
// test input
// ==========
{
if ((config.getPhysParams.mu_A <= 0) && (config.getPhysParams.mu_B <= 0))
{
config.isViscous = false;
}
else
{
if ((config.getPhysParams.mu_A <= 0) || (config.getPhysParams.mu_B <= 0))
{
throw new ArgumentException();
}
}
if ((config.getPhysParams.rho_A <= 0) || (config.getPhysParams.rho_B <= 0))
{
throw new ArgumentException();
}
if (_LsTrk.SpeciesNames.Count != 2)
{
throw new ArgumentException();
}
if (!(_LsTrk.SpeciesNames.Contains("A") && _LsTrk.SpeciesNames.Contains("B")))
{
throw new ArgumentException();
}
}
// full operator:
// ==============
CodName = ArrayTools.Cat(EquationNames.MomentumEquations(D), EquationNames.ContinuityEquation);
Params = ArrayTools.Cat(
VariableNames.Velocity0Vector(D),
VariableNames.Velocity0MeanVector(D),
VariableNames.NormalVector(D),
VariableNames.Curvature,
VariableNames.SurfaceForceVector(D)
);
DomName = ArrayTools.Cat(VariableNames.VelocityVector(D), VariableNames.Pressure);
if (config.solveEnergy)
{
CodName = ArrayTools.Cat(CodName, EquationNames.KineticEnergyEquation);
Params = ArrayTools.Cat(Params,
VariableNames.VelocityX_GradientVector(),
VariableNames.VelocityY_GradientVector(),
new string[] { "VelocityXGradX_GradientX", "VelocityXGradX_GradientY" },
new string[] { "VelocityXGradY_GradientX", "VelocityXGradY_GradientY" },
new string[] { "VelocityYGradX_GradientX", "VelocityYGradX_GradientY" },
new string[] { "VelocityYGradY_GradientX", "VelocityYGradY_GradientY" },
VariableNames.Pressure0,
VariableNames.PressureGradient(D),
VariableNames.GravityVector(D)
);
DomName = ArrayTools.Cat(DomName, VariableNames.KineticEnergy);
}
if (config.solveHeat)
{
Params = ArrayTools.Cat(Params,
VariableNames.Temperature0,
VariableNames.HeatFlux0Vector(D),
VariableNames.DisjoiningPressure
);
if (config.conductMode == ConductivityInSpeciesBulk.ConductivityMode.SIP)
{
CodName = ArrayTools.Cat(CodName, EquationNames.HeatEquation);
DomName = ArrayTools.Cat(DomName, VariableNames.Temperature);
}
else
{
CodName = ArrayTools.Cat(CodName, EquationNames.HeatEquation, EquationNames.AuxHeatFlux(D));
DomName = ArrayTools.Cat(DomName, VariableNames.Temperature, VariableNames.HeatFluxVector(D));
}
}
storedParams = new DGField[Params.Length];
// selected part:
if (config.getCodBlocks[0])
{
CodNameSelected = ArrayTools.Cat(CodNameSelected, CodName.GetSubVector(0, D));
}
if (config.getCodBlocks[1])
{
CodNameSelected = ArrayTools.Cat(CodNameSelected, CodName.GetSubVector(D, 1));
}
if (config.getDomBlocks[0])
{
DomNameSelected = ArrayTools.Cat(DomNameSelected, DomName.GetSubVector(0, D));
}
if (config.getDomBlocks[1])
{
DomNameSelected = ArrayTools.Cat(DomNameSelected, DomName.GetSubVector(D, 1));
}
int nBlocks = 2;
if (config.solveEnergy)
{
nBlocks = 3;
if (config.getCodBlocks[2])
{
CodNameSelected = ArrayTools.Cat(CodNameSelected, CodName.GetSubVector(D + 1, 1));
}
if (config.getDomBlocks[2])
{
DomNameSelected = ArrayTools.Cat(DomNameSelected, DomName.GetSubVector(D + 1, 1));
}
}
if (config.solveHeat)
{
if (config.getCodBlocks[nBlocks])
{
CodNameSelected = ArrayTools.Cat(CodNameSelected, CodName.GetSubVector(nBlocks + (D - 1) + 1, 1));
}
if (config.getDomBlocks[nBlocks])
{
DomNameSelected = ArrayTools.Cat(DomNameSelected, DomName.GetSubVector(nBlocks + (D - 1) + 1, 1));
}
if (config.conductMode != ConductivityInSpeciesBulk.ConductivityMode.SIP)
{
if (config.getCodBlocks[nBlocks + 1])
{
CodNameSelected = ArrayTools.Cat(CodNameSelected, CodName.GetSubVector(nBlocks + (D - 1) + 2, D));
}
if (config.getDomBlocks[nBlocks + 1])
{
DomNameSelected = ArrayTools.Cat(DomNameSelected, DomName.GetSubVector(nBlocks + (D - 1) + 2, D));
}
}
}
// create Operator
// ===============
m_XOp = new XSpatialOperatorMk2(DomNameSelected, Params, CodNameSelected, (A, B, C) => _HMFdegree, this.LsTrk.SpeciesNames);
// add Navier-Stokes components
// ============================
// species bulk components
for (int spc = 0; spc < LsTrk.TotalNoOfSpecies; spc++)
{
// Navier Stokes equations
Solution.XNSECommon.XOperatorComponentsFactory.AddSpeciesNSE(m_XOp, config, D, LsTrk.SpeciesNames[spc], LsTrk.SpeciesIdS[spc], BcMap, LsTrk, out U0meanrequired);
// continuity equation
if (config.isContinuity)
{
Solution.XNSECommon.XOperatorComponentsFactory.AddSpeciesContinuityEq(m_XOp, config, D, LsTrk.SpeciesNames[spc], LsTrk.SpeciesIdS[spc], BcMap);
}
}
// interface components
Solution.XNSECommon.XOperatorComponentsFactory.AddInterfaceNSE(m_XOp, config, D, BcMap, LsTrk); // surface stress tensor
Solution.XNSECommon.XOperatorComponentsFactory.AddSurfaceTensionForce(m_XOp, config, D, BcMap, LsTrk, degU, out NormalsRequired, out CurvatureRequired); // surface tension force
if (config.isContinuity)
{
Solution.XNSECommon.XOperatorComponentsFactory.AddInterfaceContinuityEq(m_XOp, config, D, LsTrk); // continuity equation
}
// add kinetic energy equation components
// ======================================
if (config.solveEnergy)
{
// species bulk components
for (int spc = 0; spc < LsTrk.TotalNoOfSpecies; spc++)
{
Solution.EnergyCommon.XOperatorComponentsFactory.AddSpeciesKineticEnergyEquation(m_XOp, config, D, LsTrk.SpeciesNames[spc], LsTrk.SpeciesIdS[spc], BcMap, LsTrk);
}
// interface components
Solution.EnergyCommon.XOperatorComponentsFactory.AddInterfaceKineticEnergyEquation(m_XOp, config, D, BcMap, LsTrk, degU);
CurvatureRequired = true;
}
// add Heat equation components
// ============================
if (config.solveHeat)
{
// species bulk components
for (int spc = 0; spc < LsTrk.TotalNoOfSpecies; spc++)
{
Solution.XheatCommon.XOperatorComponentsFactory.AddSpeciesHeatEq(m_XOp, config,
D, LsTrk.SpeciesNames[spc], LsTrk.SpeciesIdS[spc], thermBcMap, LsTrk);
}
// interface components
Solution.XheatCommon.XOperatorComponentsFactory.AddInterfaceHeatEq(m_XOp, config, D, thermBcMap, LsTrk);
}
// add Evaporation interface components
// ====================================
if (config.isEvaporation)
{
XOperatorComponentsFactory.AddInterfaceNSE_withEvaporation(m_XOp, config, D, LsTrk);
if (config.isContinuity)
{
XOperatorComponentsFactory.AddInterfaceContinuityEq_withEvaporation(m_XOp, config, D, LsTrk);
}
}
// create temporal operator
// ========================
var TempOp = new ConstantXTemporalOperator(m_XOp, 0.0);
m_XOp.TemporalOperator = TempOp;
foreach (var kv in MassScale)
{
TempOp.DiagonalScale[LsTrk.GetSpeciesName(kv.Key)].SetV(kv.Value.ToArray());
}
// Finalize
// ========
m_XOp.Commit();
}
/// <summary>
/// ctor for the operator factory, where the equation compnents are set
/// </summary>
/// <param name="config"></param>
/// <param name="_LsTrk"></param>
/// <param name="_HMFdegree"></param>
/// <param name="BcMap"></param>
/// <param name="degU"></param>
public XNSFE_OperatorFactory(XNSFE_OperatorConfiguration _config, LevelSetTracker _LsTrk, int _HMFdegree, IncompressibleMultiphaseBoundaryCondMap BcMap, int degU)
{
this.config = _config;
this.LsTrk = _LsTrk;
this.D = _LsTrk.GridDat.SpatialDimension;
this.HMFDegree = _HMFdegree;
this.physParams = config.getPhysParams;
this.thermParams = config.getThermParams;
this.dntParams = config.getDntParams;
// test input
// ==========
{
if (config.getDomBlocks.GetLength(0) != 2 || config.getCodBlocks.GetLength(0) != 2)
{
throw new ArgumentException();
}
if ((config.getPhysParams.mu_A <= 0) && (config.getPhysParams.mu_B <= 0))
{
config.isViscous = false;
}
else
{
if ((config.getPhysParams.mu_A <= 0) || (config.getPhysParams.mu_B <= 0))
{
throw new ArgumentException();
}
}
if ((config.getPhysParams.rho_A <= 0) || (config.getPhysParams.rho_B <= 0))
{
throw new ArgumentException();
}
if (_LsTrk.SpeciesNames.Count != 2)
{
throw new ArgumentException();
}
if (!(_LsTrk.SpeciesNames.Contains("A") && _LsTrk.SpeciesNames.Contains("B")))
{
throw new ArgumentException();
}
}
// full operator:
// ==============
CodName = ArrayTools.Cat(EquationNames.MomentumEquations(D), EquationNames.ContinuityEquation);
Params = ArrayTools.Cat(
VariableNames.Velocity0Vector(D),
VariableNames.Velocity0MeanVector(D),
VariableNames.NormalVector(D),
VariableNames.Curvature,
VariableNames.SurfaceForceVector(D),
VariableNames.Temperature0,
VariableNames.HeatFlux0Vector(D),
VariableNames.DisjoiningPressure
);
DomName = ArrayTools.Cat(VariableNames.VelocityVector(D), VariableNames.Pressure);
// selected part:
if (config.getCodBlocks[0])
{
CodNameSelected = ArrayTools.Cat(CodNameSelected, CodName.GetSubVector(0, D));
}
if (config.getCodBlocks[1])
{
CodNameSelected = ArrayTools.Cat(CodNameSelected, CodName.GetSubVector(D, 1));
}
if (config.getDomBlocks[0])
{
DomNameSelected = ArrayTools.Cat(DomNameSelected, DomName.GetSubVector(0, D));
}
if (config.getDomBlocks[1])
{
DomNameSelected = ArrayTools.Cat(DomNameSelected, DomName.GetSubVector(D, 1));
}
// create Operator
// ===============
m_XOp = new XSpatialOperatorMk2(DomNameSelected, Params, CodNameSelected, (A, B, C) => _HMFdegree, this.LsTrk.SpeciesIdS.ToArray());
// add Navier-Stokes components
// ============================
// species bulk components
for (int spc = 0; spc < LsTrk.TotalNoOfSpecies; spc++)
{
// Navier Stokes equations
Solution.XNSECommon.XOperatorComponentsFactory.AddSpeciesNSE(m_XOp, config, D, LsTrk.SpeciesNames[spc], LsTrk.SpeciesIdS[spc], BcMap, LsTrk, out U0meanrequired);
// continuity equation
if (config.isContinuity)
{
Solution.XNSECommon.XOperatorComponentsFactory.AddSpeciesContinuityEq(m_XOp, config, D, LsTrk.SpeciesNames[spc], LsTrk.SpeciesIdS[spc], BcMap);
}
}
// interface components
Solution.XNSECommon.XOperatorComponentsFactory.AddInterfaceNSE(m_XOp, config, D, BcMap, LsTrk); // surface stress tensor
Solution.XNSECommon.XOperatorComponentsFactory.AddSurfaceTensionForce(m_XOp, config, D, BcMap, LsTrk, degU, out NormalsRequired, out CurvatureRequired); // surface tension force
if (config.isContinuity)
{
Solution.XNSECommon.XOperatorComponentsFactory.AddInterfaceContinuityEq(m_XOp, config, D, LsTrk); // continuity equation
}
// add Evaporation interface components
// ====================================
if (config.isEvaporation)
{
XOperatorComponentsFactory.AddInterfaceNSE_withEvaporation(m_XOp, config, D, LsTrk);
if (config.isContinuity)
{
XOperatorComponentsFactory.AddInterfaceContinuityEq_withEvaporation(m_XOp, config, D, LsTrk);
}
}
m_XOp.Commit();
}