/// <summary>
/// 特殊信息
/// </summary>
/// <param name="dt_Batch">需要确认的数据</param>
/// <param name="TickNo">钩号</param>
/// <returns></returns>
public string Send_PcInfo(DataTable dt_Batch, int[] rownumber, string strPcInfo, string strDel)
{
string result = "1";
try
{
TransactionHelper.BeginTransaction();
TransactionHelper_SQL.BeginTransaction();
Dal_TQC_SPECIFIC_CONTENT_LOG dalLog = new Dal_TQC_SPECIFIC_CONTENT_LOG();
string pcinfo = strPcInfo + ";";
string userID = RV.UI.UserInfo.UserID;
DateTime dTime = RV.UI.ServerTime.timeNow();
for (int i = 0; i < rownumber.Length; i++)
{
int i_index = rownumber[i];
string strID = dt_Batch.Rows[i_index]["C_ID"].ToString();
Mod_TRC_ROLL_PRODCUT mod_roll_prodcut = dal.GetModel(strID);
if (strDel == "0")
{
if (dt_Batch.Rows[i_index]["C_PCINFO"].ToString().Contains(pcinfo))
{
mod_roll_prodcut.C_PCINFO = dt_Batch.Rows[i_index]["C_PCINFO"].ToString().Replace(pcinfo, "");
}
}
else
{
mod_roll_prodcut.C_PCINFO = mod_roll_prodcut.C_PCINFO + pcinfo;
}
string strDJ = "";
if (string.IsNullOrEmpty(mod_roll_prodcut.C_JUDGE_LEV_ZH))
{
strDJ = "DP";
}
else
{
strDJ = mod_roll_prodcut.C_JUDGE_LEV_ZH;
}
string sql = "";
sql += "insert into ReZJB_GPD(Barcode,WGDH,CK,HW,PCH,WLH,WLMC,SX,PH,GG,BB,GH,ZL,BZ,RQ,RKType,RKRY,WeightRQ,ProduceData,PCInfo,vfree0,vfree3,GPTYPE,ZJBstatus,CAPPK,vfree1,vfree2,insertts) values('" + mod_roll_prodcut.C_BARCODE + "','" + mod_roll_prodcut.C_TRC_ROLL_MAIN_ID + "','" + mod_roll_prodcut.C_LINEWH_CODE + "','" + mod_roll_prodcut.C_LINEWH_LOC_CODE + "','" + mod_roll_prodcut.C_BATCH_NO + "','" + mod_roll_prodcut.C_MAT_CODE + "','" + mod_roll_prodcut.C_MAT_DESC + "','" + strDJ + "','" + mod_roll_prodcut.C_STL_GRD + "','" + mod_roll_prodcut.C_SPEC + "mm','" + mod_roll_prodcut.C_GROUP + "','" + mod_roll_prodcut.C_TICK_NO + "','" + mod_roll_prodcut.N_WGT + "','" + mod_roll_prodcut.C_STD_CODE + "','" + mod_roll_prodcut.D_RKRQ + "','" + mod_roll_prodcut.C_MOVE_DESC + "','" + mod_roll_prodcut.C_RKRY + "','" + mod_roll_prodcut.D_WEIGHT_DT + "','" + mod_roll_prodcut.D_PRODUCE_DATE + "','" + mod_roll_prodcut.C_PCINFO + "','" + mod_roll_prodcut.C_STOVE + "','" + mod_roll_prodcut.C_BZYQ + "','','0','" + mod_roll_prodcut.C_ID + "','" + mod_roll_prodcut.C_ZYX1 + "','" + mod_roll_prodcut.C_ZYX2 + "','" + dTime + "')";
if (TransactionHelper_SQL.ExecuteSql(sql) == 0)
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("特殊信息传到条码时出错！");
}
mod_roll_prodcut.C_EMP_ID = userID;
mod_roll_prodcut.C_PLANT_DESC = dTime.ToString();
if (!dal.Update_Trans_XL(mod_roll_prodcut))
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("特殊信息保存时出错！");
}
Mod_TQC_SPECIFIC_CONTENT_LOG modLog = new Mod_TQC_SPECIFIC_CONTENT_LOG();
modLog.C_BATCH_NO = mod_roll_prodcut.C_BATCH_NO;
if (strDel == "0")
{
modLog.C_CONTENT = "取消" + strPcInfo;
}
else
{
modLog.C_CONTENT = "添加" + strPcInfo;
}
modLog.C_TICK_NO = mod_roll_prodcut.C_TICK_NO;
modLog.C_EMP_ID = userID;
if (!dalLog.Add_Trans(modLog))
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("特殊信息保存日志失败！");
}
}
TransactionHelper.Commit();
TransactionHelper_SQL.Commit();
return(result);
}
catch (Exception ex)
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return(ex.Message);
}
}
/// <summary>
/// 下发条码
/// </summary>
/// <returns></returns>
public string Down_RF(DataTable dt)
{
string result = "1";
try
{
TransactionHelper.BeginTransaction();
TransactionHelper_SQL.BeginTransaction();
string userID = RV.UI.UserInfo.UserID;
DateTime dTime = RV.UI.ServerTime.timeNow();
Dal_TRC_ROLL_PDD_ITEM dalRollPddItem = new Dal_TRC_ROLL_PDD_ITEM();
Dal_TPB_LINEWH dalTpbLineWh = new Dal_TPB_LINEWH();
Int64 i_ID_Main = 0;
Int64 i_ID_Item = 0;
string s_id_main = dal.Get_Max_ID();
if (string.IsNullOrEmpty(s_id_main))
{
i_ID_Main = 20190200000;
}
else
{
i_ID_Main = Convert.ToInt64(s_id_main) + 1;
}
string s_id_item = dalRollPddItem.Get_Max_ID();
if (string.IsNullOrEmpty(s_id_item))
{
i_ID_Item = 2019022500000;
}
else
{
i_ID_Item = Convert.ToInt64(s_id_item) + 1;
}
for (int i = 0; i < dt.Rows.Count; i++)
{
if (dt.Rows[i]["条码账存卷数"].ToString() == "0")
{
continue;
}
string NC_CK_ID = dalTpbLineWh.GetList_id(dt.Rows[i]["仓库"].ToString()).ToString();
string strDH = dal.Get_PDDH(dTime.ToString(), dt.Rows[i]["仓库"].ToString());
if (string.IsNullOrEmpty(strDH))
{
strDH = dal.Get_Max_PDDH(dTime.ToString());
if (string.IsNullOrEmpty(strDH))
{
strDH = "PD" + dTime.ToString("yyyyMMdd") + "0001";
}
else
{
strDH = "PD" + (Convert.ToUInt64(strDH) + 1).ToString();
}
i_ID_Main++;
Mod_TRC_ROLL_PDD modPdd = new Mod_TRC_ROLL_PDD();
modPdd.C_ID = i_ID_Main.ToString();
modPdd.C_CK = dt.Rows[i]["仓库"].ToString();
modPdd.D_PDRQ = dTime;
modPdd.C_YSDH = strDH;
modPdd.D_INSERT = dTime;
if (!dal.Add_Trans(modPdd))
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("往CAP盘点主表插入失败！");
}
string strSql = "insert into ReZJB_PDD(ZJBstatus,CAPPK,ck,pdrq,ysdh,insertts,beizhu)values('0','" + i_ID_Main.ToString() + "','" + NC_CK_ID + "','" + dTime + "','" + strDH + "','" + dTime + "','') ";
if (!dal.Add_RF_Trans(strSql))
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("往RF盘点主表插入失败！");
}
}
i_ID_Item++;
Mod_TRC_ROLL_PDD_ITEM modItem = new Mod_TRC_ROLL_PDD_ITEM();
modItem.C_YSDH = strDH;
modItem.C_MATCODE = dt.Rows[i]["物料号"].ToString();
modItem.C_PCH = dt.Rows[i]["批次号"].ToString();
modItem.C_SX = dt.Rows[i]["质量等级"].ToString();
//modItem.C_ZCSL = dt.Rows[i]["仓库"].ToString();
//modItem.C_FZCZL = dt.Rows[i]["仓库"].ToString();
//modItem.C_FREE0 = "";
modItem.C_FREE1 = dt.Rows[i]["自由项1"].ToString();
modItem.C_FREE2 = dt.Rows[i]["自由项2"].ToString();
modItem.C_FREE3 = dt.Rows[i]["自由项3"].ToString();
//modItem.C_FREE4 = "";
modItem.C_ID = i_ID_Item.ToString();
modItem.D_INSERT = dTime;
//modItem.C_REMARK = "";
modItem.C_CK = dt.Rows[i]["仓库"].ToString();
modItem.C_MATDESC = dt.Rows[i]["物料名称"].ToString();
modItem.C_SPEC = dt.Rows[i]["规格"].ToString();
modItem.C_STL_GRD = dt.Rows[i]["钢种"].ToString();
modItem.C_NC_SL = Convert.ToDecimal(dt.Rows[i]["NC账存卷数"].ToString());
modItem.C_NC_ZL = Convert.ToDecimal(dt.Rows[i]["NC账存数量"].ToString());
modItem.C_CAP_SL = Convert.ToDecimal(dt.Rows[i]["CAP账存卷数"].ToString());
modItem.C_CAP_ZL = Convert.ToDecimal(dt.Rows[i]["CAP账存数量"].ToString());
modItem.C_RF_SL = Convert.ToDecimal(dt.Rows[i]["条码账存卷数"].ToString());
modItem.C_RF_ZL = Convert.ToDecimal(dt.Rows[i]["条码账存数量"].ToString());
//modItem.C_RF_SJ_SL = dt.Rows[i]["仓库"].ToString();
//modItem.C_RF_SJ_ZL = dt.Rows[i]["仓库"].ToString();
modItem.C_NC_CAP_SL = Convert.ToDecimal(dt.Rows[i]["NC与CAP卷数账差"].ToString());
modItem.C_NC_CAP_ZL = Convert.ToDecimal(dt.Rows[i]["NC与CAP数量账差"].ToString());
modItem.C_RF_CAP_SL = Convert.ToDecimal(dt.Rows[i]["条码与CAP卷数账差"].ToString());
modItem.C_RF_CAP_ZL = Convert.ToDecimal(dt.Rows[i]["条码与CAP数量账差"].ToString());
//modItem.C_CAP_SJ_SL = Convert.ToDecimal(dt.Rows[i]["CAP与实盘卷数差异"].ToString());
//modItem.C_CAP_SJ_ZL = Convert.ToDecimal(dt.Rows[i]["CAP与实盘数量差异"].ToString());
if (!dalRollPddItem.Add_Trans(modItem))
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("往CAP盘点明细表插入失败！");
}
string strSql_Item = "insert into ReZJB_PDD_Item(ysdh,BARCODE,PCH,SX,ZCSL,FZCZL,vfree0,vfree1,vfree2,vfree3,vfree4,ZJBstatus,CAPPK,insertts)values('" + strDH + "','" + dt.Rows[i]["物料号"].ToString() + "','" + dt.Rows[i]["批次号"].ToString() + "','" + dt.Rows[i]["质量等级"].ToString() + "','" + dt.Rows[i]["条码账存卷数"].ToString() + "','" + dt.Rows[i]["条码账存数量"].ToString() + "','','" + dt.Rows[i]["自由项1"].ToString() + "','" + dt.Rows[i]["自由项2"].ToString() + "','" + dt.Rows[i]["自由项3"].ToString() + "','','0','" + i_ID_Item.ToString() + "','" + dTime + "' ) ";
if (!dal.Add_RF_Trans(strSql_Item))
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("往RF盘点主表插入失败！");
}
}
TransactionHelper.Commit();
TransactionHelper_SQL.Commit();
}
catch (Exception ex)
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return(ex.Message);
}
return(result);
}
/// <summary>
/// 同步条码盘点结果信息
/// </summary>
/// <returns></returns>
public string TB_RF_PD_Result()
{
string result = "1";
try
{
TransactionHelper.BeginTransaction();
TransactionHelper_SQL.BeginTransaction();
string userID = RV.UI.UserInfo.UserID;
DateTime dTime = RV.UI.ServerTime.timeNow();
Dal_TRC_ROLL_PDD_ITEM dalRollPddItem = new Dal_TRC_ROLL_PDD_ITEM();
DataTable dtMain = dal.Get_PD_List().Tables[0];
if (dtMain.Rows.Count > 0)
{
for (int i = 0; i < dtMain.Rows.Count; i++)
{
DataTable dtItem = dal.Get_PD_ITEM_List(dtMain.Rows[i]["ysdh"].ToString()).Tables[0];
for (int mm = 0; mm < dtItem.Rows.Count; mm++)
{
Mod_TRC_ROLL_PDD_ITEM model_Item = dalRollPddItem.GetModel(dtItem.Rows[mm]["YSDH"].ToString(), dtItem.Rows[mm]["BARCODE"].ToString(), dtItem.Rows[mm]["PCH"].ToString(), dtItem.Rows[mm]["SX"].ToString(), dtItem.Rows[mm]["vfree1"].ToString(), dtItem.Rows[mm]["vfree2"].ToString(), dtItem.Rows[mm]["vfree3"].ToString());
if (model_Item != null)
{
model_Item.C_RF_SJ_SL = Convert.ToDecimal(dtItem.Rows[mm]["SPSL"].ToString());
model_Item.C_RF_SJ_ZL = Convert.ToDecimal(dtItem.Rows[mm]["SPZL"].ToString());
model_Item.C_CAP_SJ_SL = model_Item.C_CAP_SL - model_Item.C_RF_SJ_SL;
model_Item.C_CAP_SJ_ZL = model_Item.C_CAP_ZL - model_Item.C_RF_SJ_ZL;
if (!dalRollPddItem.Update_Trans(model_Item))
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("更新实盘重量失败！");
}
}
}
string strSql = "update SeZJB_PDD_FINISHED set ZJBstatus=1 where ysdh='" + dtMain.Rows[i]["ysdh"].ToString() + "' ";
if (!dal.Update_RF_Trans(strSql))
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("更新条码盘点表状态失败！");
}
}
}
else
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("没有需要同步的盘点信息！");
}
TransactionHelper.Commit();
TransactionHelper_SQL.Commit();
}
catch (Exception ex)
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return(ex.Message);
}
return(result);
}
/// <summary>
/// 修料
/// </summary>
/// <param name="strs">线材实绩主键</param>
/// <param name="Type">修料状态</param>
/// <param name="PCINFO">特殊信息</param>
/// <returns></returns>
public int TransaTSXX(string strs, string Type, string PCINFO, string rollID, string strSFHG)
{
try
{
Dal_TRC_ROLL_PRODCUT dalTrcRollProduct = new Dal_TRC_ROLL_PRODCUT();
Dal_TQC_UPDATE_MATERIAL dal_Update = new Dal_TQC_UPDATE_MATERIAL();
Dal_TQC_UPDATE_MATERIAL_LOG dal_update_log = new Dal_TQC_UPDATE_MATERIAL_LOG();
Dal_TQC_UPD_MATERIAL_MAIN dalUpdMain = new Dal_TQC_UPD_MATERIAL_MAIN();
Dal_Interface_FR dalInterface_FR = new Dal_Interface_FR();
Dal_TQC_SPECIFIC_CONTENT_LOG dalLog = new Dal_TQC_SPECIFIC_CONTENT_LOG();
TransactionHelper.BeginTransaction();
TransactionHelper_SQL.BeginTransaction();
string strUserID = RV.UI.UserInfo.UserID;
DateTime dTime = RV.UI.ServerTime.timeNow();
string[] strs_Product_ID = strs.Substring(0, strs.Length - 1).Split(',');
string[] strs_ID = null;
if (rollID != "")
{
strs_ID = rollID.Substring(0, rollID.Length - 1).Split(',');
}
if (strs_Product_ID.Length == 0)
{
TransactionHelper_SQL.RollBack();
TransactionHelper.RollBack();
return(0);
}
for (int i = 0; i < strs_Product_ID.Length; i++)
{
Mod_TRC_ROLL_PRODCUT modProduct = dalTrcRollProduct.GetModel(strs_Product_ID[i]);
Mod_TQC_UPDATE_MATERIAL_LOG mod_log = new Mod_TQC_UPDATE_MATERIAL_LOG();
decimal? wgt = modProduct.N_WGT;
DataTable dt = dalInterface_FR.Get_TM_XL_List(modProduct.C_BATCH_NO, modProduct.C_TICK_NO).Tables[0];
if (dt == null)
{
TransactionHelper_SQL.RollBack();
TransactionHelper.RollBack();
return(0);
}
if (rollID == "")
{
Mod_TQC_UPDATE_MATERIAL mod = new Mod_TQC_UPDATE_MATERIAL();
mod.C_ROLL_PRODUCT_ID = modProduct.C_ID;
mod.C_TYPE = Type;
mod.C_EMP_ID = strUserID;
mod.C_SFHG = strSFHG;
mod_log.C_TYPE = mod.C_TYPE;
dalUpdMain.Update_BATCH_NO(modProduct.C_BATCH_NO);
if (!dal_Update.Add_Trans(mod))
{
TransactionHelper_SQL.RollBack();
TransactionHelper.RollBack();
return(0);
}
}
else
{
Mod_TQC_UPDATE_MATERIAL mod = dal_Update.GetModel(strs_ID[i]);
if (Type == "2")
{
if (mod.C_TYPE == "3")
{
mod.C_TYPE = "6";
PCINFO = "0";
Mod_TQC_UPDATE_MATERIAL_LOG mod_logs = new Mod_TQC_UPDATE_MATERIAL_LOG();
mod_logs.C_TYPE = "2";
mod_logs.N_WGT = wgt;
mod_logs.N_WGT_DIFFERENCE = wgt - Convert.ToDecimal(dt.Rows[0]["ZL"]);
mod_logs.C_SFHG = mod.C_SFHG;
mod_logs.C_ROLL_PRODUCT_ID = modProduct.C_ID;
mod_logs.C_EMP_ID = strUserID;
if (!dal_update_log.Add_Trans(mod_logs))
{
TransactionHelper_SQL.RollBack();
TransactionHelper.RollBack();
return(0);
}
}
else
{
mod.C_TYPE = Type;
}
}
if (Type == "3")
{
if (mod.C_TYPE == "2")
{
mod.C_TYPE = "6";
PCINFO = "0";
Mod_TQC_UPDATE_MATERIAL_LOG mod_logs = new Mod_TQC_UPDATE_MATERIAL_LOG();
mod_logs.C_TYPE = "3";
mod_logs.N_WGT = wgt;
mod_logs.N_WGT_DIFFERENCE = wgt - Convert.ToDecimal(dt.Rows[0]["ZL"]);
mod_logs.C_SFHG = mod.C_SFHG;
mod_logs.C_ROLL_PRODUCT_ID = modProduct.C_ID;
mod_logs.C_EMP_ID = strUserID;
if (!dal_update_log.Add_Trans(mod_logs))
{
TransactionHelper_SQL.RollBack();
TransactionHelper.RollBack();
return(0);
}
}
else
{
mod.C_TYPE = Type;
}
}
mod.C_EMP_ID = strUserID;
mod.D_MOD_DT = dTime;
mod.N_WGT = wgt;
mod.C_SFHG = strSFHG;
mod.N_WGT_DIFFERENCE = wgt - Convert.ToDecimal(dt.Rows[0]["ZL"]);
mod_log.C_TYPE = mod.C_TYPE;
mod_log.N_WGT = wgt;
mod_log.N_WGT_DIFFERENCE = wgt - Convert.ToDecimal(dt.Rows[0]["ZL"]);
mod_log.C_SFHG = mod.C_SFHG;
modProduct.N_WGT = Convert.ToDecimal(dt.Rows[0]["ZL"]);
if (!dal_Update.Update_Trans(mod))
{
TransactionHelper_SQL.RollBack();
TransactionHelper.RollBack();
return(0);
}
}
if (PCINFO == "0")
{
if (modProduct.C_PCINFO.Contains("待修料;"))
{
modProduct.C_PCINFO = modProduct.C_PCINFO.Replace("待修料;", "");
}
}
else
{
if (modProduct.C_PCINFO == "")
{
modProduct.C_PCINFO = PCINFO + ";";
}
else if (modProduct.C_PCINFO.Contains("待修料"))
{
modProduct.C_PCINFO = modProduct.C_PCINFO;
}
else
{
modProduct.C_PCINFO = modProduct.C_PCINFO + PCINFO + ";";
}
}
modProduct.C_EMP_ID = strUserID;
modProduct.C_PLANT_DESC = dTime.ToString();
if (!dalTrcRollProduct.Update_Trans_XL(modProduct))
{
TransactionHelper_SQL.RollBack();
TransactionHelper.RollBack();
return(0);
}
mod_log.C_ROLL_PRODUCT_ID = modProduct.C_ID;
mod_log.C_EMP_ID = strUserID;
if (!dal_update_log.Add_Trans(mod_log))
{
TransactionHelper_SQL.RollBack();
TransactionHelper.RollBack();
return(0);
}
string strDJ = "";
if (string.IsNullOrEmpty(modProduct.C_JUDGE_LEV_ZH))
{
strDJ = "DP";
}
else
{
strDJ = modProduct.C_JUDGE_LEV_ZH;
}
string sql = "";
sql += "insert into ReZJB_GPD(Barcode,WGDH,CK,HW,PCH,WLH,WLMC,SX,PH,GG,BB,GH,ZL,BZ,RQ,RKType,RKRY,WeightRQ,ProduceData,PCInfo,vfree0,vfree3,GPTYPE,ZJBstatus,CAPPK,vfree1,vfree2,insertts) values('" + modProduct.C_BARCODE + "','" + modProduct.C_TRC_ROLL_MAIN_ID + "','" + modProduct.C_LINEWH_CODE + "','" + modProduct.C_LINEWH_LOC_CODE + "','" + modProduct.C_BATCH_NO + "','" + modProduct.C_MAT_CODE + "','" + modProduct.C_MAT_DESC + "','" + strDJ + "','" + modProduct.C_STL_GRD + "','" + modProduct.C_SPEC + "mm','" + modProduct.C_GROUP + "','" + modProduct.C_TICK_NO + "','" + modProduct.N_WGT + "','" + modProduct.C_STD_CODE + "','" + modProduct.D_RKRQ + "','" + modProduct.C_MOVE_DESC + "','" + modProduct.C_RKRY + "','" + modProduct.D_WEIGHT_DT + "','" + modProduct.D_PRODUCE_DATE + "','" + modProduct.C_PCINFO + "','" + modProduct.C_STOVE + "','" + modProduct.C_BZYQ + "','','0','" + modProduct.C_ID + "','" + modProduct.C_ZYX1 + "','" + modProduct.C_ZYX2 + "','" + RV.UI.ServerTime.timeNow() + "')";
if (TransactionHelper_SQL.ExecuteSql(sql) == 0)
{
TransactionHelper_SQL.RollBack();
TransactionHelper.RollBack();
return(0);
}
else
{
if (rollID != "")
{
Mod_TQC_UPDATE_MATERIAL mod = dal_Update.GetModel(strs_ID[i]);
if (Type == "2")
{
if (mod.C_TYPE == "3")
{
Mod_TQC_SPECIFIC_CONTENT_LOG modLog = new Mod_TQC_SPECIFIC_CONTENT_LOG();
modLog.C_BATCH_NO = modProduct.C_BATCH_NO;
modLog.C_CONTENT = "取消待修料";
modLog.C_TICK_NO = modProduct.C_TICK_NO;
modLog.C_EMP_ID = strUserID;
if (!dalLog.Add_Trans(modLog))
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return(0);
}
}
}
if (Type == "3")
{
if (mod.C_TYPE == "2")
{
Mod_TQC_SPECIFIC_CONTENT_LOG modLog = new Mod_TQC_SPECIFIC_CONTENT_LOG();
modLog.C_BATCH_NO = modProduct.C_BATCH_NO;
modLog.C_CONTENT = "取消待修料";
modLog.C_TICK_NO = modProduct.C_TICK_NO;
modLog.C_EMP_ID = strUserID;
if (!dalLog.Add_Trans(modLog))
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return(0);
}
}
}
}
}
}
TransactionHelper_SQL.Commit();
TransactionHelper.Commit();
return(1);
}
catch (Exception ex)
{
TransactionHelper_SQL.RollBack();
TransactionHelper.RollBack();
return(0);
}
}
/// <summary>
/// 改判
/// </summary>
/// <param name="strs">已选择的数据ID数组</param>
/// <param name="strGrd">钢种</param>
/// <param name="strStdCode">执行标准</param>
/// <param name="strMatCode">物料编码</param>
/// <param name="strMatName">物料名称</param>
/// <param name="strZrdwID">责任单位代码</param>
/// <param name="strZrdwName">责任单位描述</param>
/// <param name="strRemark">备注</param>
/// <param name="strUrl">NC接口地址</param>
/// <param name="strPDDJ">判定等级</param>
/// <param name="strZYX1">自由项1</param>
/// <param name="strZYX2">自由项2</param>
/// <param name="strBZYQ">包装要求</param>
/// <param name="strGPYY">改判原因</param>
/// <returns></returns>
public string Gp_Roll_WW(string strs, string strGrd, string strStdCode, string strMatCode, string strMatName, string strZrdwID, string strZrdwName, string strRemark, string strUrl, string strPDDJ, string strZYX1, string strZYX2, string strBZYQ, string strGPYY)
{
string result = "1";
try
{
Dal_TRC_ROLL_PRODCUT dalTrcRollProduct = new Dal_TRC_ROLL_PRODCUT();
Dal_Interface_NC_Roll_KC4N dalInterface = new Dal_Interface_NC_Roll_KC4N();
Dal_TB_STD_CONFIG dalTbStdConfig = new Dal_TB_STD_CONFIG();
Dal_TQD_DESIGN dalDesign = new Dal_TQD_DESIGN();
TransactionHelper.BeginTransaction();
TransactionHelper_SQL.BeginTransaction();
string strUserID = RV.UI.UserInfo.userID;
DateTime time = RV.UI.ServerTime.timeNow();
string strBatch = "";
string C_MASTER_ID = "";
string C_GP_BEFORE_ID = "";
string C_GP_AFTER_ID = "";
string strDesignNo = dalDesign.Get_Design_No(strStdCode, strGrd);
if (string.IsNullOrEmpty(strDesignNo))
{
return("改判失败，没有找到对应的执行标准信息！");
}
DataTable dt = dal.GetList_max().Tables[0];
if (string.IsNullOrEmpty(dt.Rows[0]["C_MASTER_ID"].ToString()))
{
C_MASTER_ID = "XJ" + time.ToString("yyMMdd00001");
}
else
{
C_MASTER_ID = "XJ" + (Convert.ToInt64(dt.Rows[0]["C_MASTER_ID"].ToString()) + 1).ToString();
}
if (string.IsNullOrEmpty(dt.Rows[0]["C_GP_BEFORE_ID"].ToString()))
{
C_GP_BEFORE_ID = "XQ" + time.ToString("yyMMdd00001");
}
else
{
C_GP_BEFORE_ID = "XQ" + (Convert.ToInt64(dt.Rows[0]["C_GP_BEFORE_ID"].ToString()) + 1).ToString();
}
if (string.IsNullOrEmpty(dt.Rows[0]["C_GP_AFTER_ID"].ToString()))
{
C_GP_AFTER_ID = "XH" + time.ToString("yyMMdd00001");
}
else
{
C_GP_AFTER_ID = "XH" + (Convert.ToInt64(dt.Rows[0]["C_GP_AFTER_ID"].ToString()) + 1).ToString();
}
string[] strs_Product_ID = strs.Substring(0, strs.Length - 1).Split(',');
if (strs_Product_ID.Length == 0)
{
return("改判失败，请选择需要改判的数据！");
}
for (int i = 0; i < strs_Product_ID.Length; i++)
{
Mod_TRC_ROLL_PRODCUT modProduct = dalTrcRollProduct.GetModel(strs_Product_ID[i]);
strBatch = modProduct.C_BATCH_NO;
if (modProduct != null)
{
Mod_TQC_ROLL_COMMUTE modTqcRollCommute = new Mod_TQC_ROLL_COMMUTE();
modTqcRollCommute.C_ROLL_ID = modProduct.C_ID;
modTqcRollCommute.C_STA_ID = modProduct.C_PLANT_ID;
//modTqcRollCommute.C_STA_DESC = modProduct.C_PLANT_DESC;
modTqcRollCommute.C_STOVE = modProduct.C_STOVE;
modTqcRollCommute.C_BATCH_NO = modProduct.C_BATCH_NO;
modTqcRollCommute.C_TICK_NO = modProduct.C_TICK_NO;
modTqcRollCommute.N_WGT = Convert.ToDecimal(modProduct.N_WGT);
modTqcRollCommute.C_STL_GRD_BEFORE = modProduct.C_STL_GRD;
modTqcRollCommute.C_STA_ID = modProduct.C_STA_ID;
modTqcRollCommute.C_STD_CODE_BEFORE = modProduct.C_STD_CODE;
modTqcRollCommute.C_SPEC_BEFORE = modProduct.C_SPEC;
modTqcRollCommute.C_MAT_CODE_BEFORE = modProduct.C_MAT_CODE;
modTqcRollCommute.C_MAT_DESC_BEFORE = modProduct.C_MAT_DESC;
modTqcRollCommute.C_ZYX1_BEFORE = modProduct.C_ZYX1;
modTqcRollCommute.C_ZYX2_BEFORE = modProduct.C_ZYX2;
modTqcRollCommute.C_JUDGE_LEV_BP_BEFORE = modProduct.C_JUDGE_LEV_ZH;
modTqcRollCommute.D_COMMUTE_DATE = time;
modTqcRollCommute.C_STL_GRD_AFTER = strGrd;
modTqcRollCommute.C_STD_CODE_AFTER = strStdCode;
modTqcRollCommute.C_SPEC_AFTER = modProduct.C_SPEC;
modTqcRollCommute.C_MAT_CODE_AFTER = strMatCode;
modTqcRollCommute.C_MAT_DESC_AFTER = strMatName;
modTqcRollCommute.C_REASON_DEPMT_ID = strZrdwID;
modTqcRollCommute.C_REASON_DEPMT_DESC = strZrdwName;
modTqcRollCommute.C_ZYX1_AFTER = strZYX1;
modTqcRollCommute.C_ZYX2_AFTER = strZYX2;
modTqcRollCommute.C_EMP_ID = strUserID;
modTqcRollCommute.C_REMARK = strRemark;
modTqcRollCommute.C_MASTER_ID = C_MASTER_ID;
modTqcRollCommute.C_GP_BEFORE_ID = C_GP_BEFORE_ID;
modTqcRollCommute.C_GP_AFTER_ID = C_GP_AFTER_ID;
modTqcRollCommute.C_JUDGE_LEV_BP_AFTER = strPDDJ;
modTqcRollCommute.C_BZYQ_AFTER = strBZYQ;
modTqcRollCommute.C_BZYQ_BEFORE = modProduct.C_BZYQ;
modTqcRollCommute.C_COMMUTE_REASON = strGPYY;
if (dal.Add_Trans(modTqcRollCommute))
{
modProduct.C_STD_CODE = strStdCode;
modProduct.C_STL_GRD = strGrd;
modProduct.C_MAT_DESC = strMatName;
modProduct.C_MAT_CODE = strMatCode;
modProduct.C_MASTER_ID = C_MASTER_ID;
modProduct.C_JUDGE_LEV_ZH = strPDDJ;
modProduct.C_GP_BEFORE_ID = C_GP_BEFORE_ID;
modProduct.C_GP_AFTER_ID = C_GP_AFTER_ID;
modProduct.C_ZYX1 = strZYX1;
modProduct.C_ZYX2 = strZYX2;
modProduct.C_BZYQ = strBZYQ;
modProduct.C_JUDGE_LEV_ZH = strPDDJ;
modProduct.C_IS_PD = "N";
modProduct.C_IS_QR = "Y";
modProduct.C_QR_USER = strUserID;
modProduct.D_QR_DATE = time;
modProduct.C_DESIGN_NO = strDesignNo;
modProduct.C_QGP_STATE = "Y";
modProduct.C_COMMUTE_REASON = strGPYY;
if (!dalTrcRollProduct.Update_Trans(modProduct))
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("改判失败，请检查改判的信息！");
}
}
else
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("改判失败，添加改判记录失败!");
}
}
}
//综合判定需要
if (!dalTrcRollProduct.Update_Batch_No(strBatch))
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("改判失败，请检查批号！");
}
string result_NC = dalInterface.SendXml_GP(strUrl, C_MASTER_ID, C_GP_BEFORE_ID, C_GP_AFTER_ID);
if (result_NC != "1")
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return(result_NC);
}
TransactionHelper_SQL.Commit();
TransactionHelper.Commit();
}
catch (Exception ex)
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return(ex.Message);
}
return(result);
}
/// <summary>
/// 改判
/// </summary>
/// <param name="strs">已选择的数据ID数组</param>
/// <param name="strGrd">钢种</param>
/// <param name="strStdCode">执行标准</param>
/// <param name="strMatCode">物料编码</param>
/// <param name="strMatName">物料名称</param>
/// <param name="strZrdwID">责任单位代码</param>
/// <param name="strZrdwName">责任单位描述</param>
/// <param name="strRemark">备注</param>
/// <param name="strUrl">NC接口地址</param>
/// <param name="strPDDJ">判定等级</param>
/// <param name="strZYX1">自由项1</param>
/// <param name="strZYX2">自由项2</param>
/// <param name="strBZYQ">包装要求</param>
/// <param name="strGPYY">改判原因</param>
/// <returns></returns>
public string Gp_Roll(string strs, string strGrd, string strStdCode, string strMatCode, string strMatName, string strZrdwID, string strZrdwName, string strRemark, string strUrl, string strPDDJ, string strZYX1, string strZYX2, string strBZYQ, string strGPYY)
{
string result = "1";
try
{
Dal_TRC_ROLL_PRODCUT dalTrcRollProduct = new Dal_TRC_ROLL_PRODCUT();
Dal_Interface_NC_Roll_KC4N dalInterface = new Dal_Interface_NC_Roll_KC4N();
Dal_TB_STD_CONFIG dalTbStdConfig = new Dal_TB_STD_CONFIG();
Dal_TQD_DESIGN dalDesign = new Dal_TQD_DESIGN();
TransactionHelper.BeginTransaction();
TransactionHelper_SQL.BeginTransaction();
string strUserID = RV.UI.UserInfo.userID;
DateTime time = RV.UI.ServerTime.timeNow();
string strBatch = "";
string C_MASTER_ID = "";
string C_GP_BEFORE_ID = "";
string C_GP_AFTER_ID = "";
string strDesignNo = dalDesign.Get_Design_No(strStdCode, strGrd);
if (string.IsNullOrEmpty(strDesignNo))
{
return("改判失败，没有找到对应的执行标准信息！");
}
DataTable dt = dal.GetList_max().Tables[0];
if (string.IsNullOrEmpty(dt.Rows[0]["C_MASTER_ID"].ToString()))
{
C_MASTER_ID = "XJ" + time.ToString("yyMMdd00001");
}
else
{
C_MASTER_ID = "XJ" + (Convert.ToInt64(dt.Rows[0]["C_MASTER_ID"].ToString()) + 1).ToString();
}
if (string.IsNullOrEmpty(dt.Rows[0]["C_GP_BEFORE_ID"].ToString()))
{
C_GP_BEFORE_ID = "XQ" + time.ToString("yyMMdd00001");
}
else
{
C_GP_BEFORE_ID = "XQ" + (Convert.ToInt64(dt.Rows[0]["C_GP_BEFORE_ID"].ToString()) + 1).ToString();
}
if (string.IsNullOrEmpty(dt.Rows[0]["C_GP_AFTER_ID"].ToString()))
{
C_GP_AFTER_ID = "XH" + time.ToString("yyMMdd00001");
}
else
{
C_GP_AFTER_ID = "XH" + (Convert.ToInt64(dt.Rows[0]["C_GP_AFTER_ID"].ToString()) + 1).ToString();
}
string[] strs_Product_ID = strs.Substring(0, strs.Length - 1).Split(',');
if (strs_Product_ID.Length == 0)
{
return("改判失败，请选择需要改判的数据！");
}
for (int i = 0; i < strs_Product_ID.Length; i++)
{
Mod_TRC_ROLL_PRODCUT modProduct = dalTrcRollProduct.GetModel(strs_Product_ID[i]);
strBatch = modProduct.C_BATCH_NO;
string sql = "";
sql += "insert into ReZJB_GPD(Barcode,WGDH,CK,HW,PCH,WLH,WLMC,SX,PH,GG,BB,GH,ZL,BZ,RQ,RKType,RKRY,WeightRQ,ProduceData,PCInfo,vfree0,vfree3,GPTYPE,ZJBstatus,CAPPK,vfree1,vfree2,insertts) values('" + modProduct.C_BARCODE + "','" + modProduct.C_TRC_ROLL_MAIN_ID + "','" + modProduct.C_LINEWH_CODE + "','" + modProduct.C_LINEWH_LOC_CODE + "','" + modProduct.C_BATCH_NO + "','" + strMatCode + "','" + strMatName + "','" + strPDDJ + "','" + strGrd + "','" + modProduct.C_SPEC + "mm','" + modProduct.C_GROUP + "','" + modProduct.C_TICK_NO + "','" + modProduct.N_WGT + "','" + strStdCode + "','" + modProduct.D_RKRQ + "','" + modProduct.C_MOVE_DESC + "','" + modProduct.C_RKRY + "','" + modProduct.D_WEIGHT_DT + "','" + modProduct.D_PRODUCE_DATE + "','" + modProduct.C_PCINFO + "','" + modProduct.C_STOVE + "','" + strBZYQ + "','','0','" + modProduct.C_ID + "','" + strZYX1 + "','" + strZYX2 + "','" + time + "')";
if (TransactionHelper_SQL.ExecuteSql(sql) == 0)
{
TransactionHelper_SQL.RollBack();
return("改判失败，信息传到条码时出错！");
}
if (modProduct != null)
{
Mod_TQC_ROLL_COMMUTE modTqcRollCommute = new Mod_TQC_ROLL_COMMUTE();
modTqcRollCommute.C_ROLL_ID = modProduct.C_ID;
modTqcRollCommute.C_STA_ID = modProduct.C_PLANT_ID;
//modTqcRollCommute.C_STA_DESC = modProduct.C_PLANT_DESC;
modTqcRollCommute.C_STOVE = modProduct.C_STOVE;
modTqcRollCommute.C_BATCH_NO = modProduct.C_BATCH_NO;
modTqcRollCommute.C_TICK_NO = modProduct.C_TICK_NO;
modTqcRollCommute.N_WGT = Convert.ToDecimal(modProduct.N_WGT);
modTqcRollCommute.C_STL_GRD_BEFORE = modProduct.C_STL_GRD;
modTqcRollCommute.C_STA_ID = modProduct.C_STA_ID;
modTqcRollCommute.C_STD_CODE_BEFORE = modProduct.C_STD_CODE;
modTqcRollCommute.C_SPEC_BEFORE = modProduct.C_SPEC;
modTqcRollCommute.C_MAT_CODE_BEFORE = modProduct.C_MAT_CODE;
modTqcRollCommute.C_MAT_DESC_BEFORE = modProduct.C_MAT_DESC;
modTqcRollCommute.C_ZYX1_BEFORE = modProduct.C_ZYX1;
modTqcRollCommute.C_ZYX2_BEFORE = modProduct.C_ZYX2;
modTqcRollCommute.C_JUDGE_LEV_BP_BEFORE = modProduct.C_JUDGE_LEV_ZH;
modTqcRollCommute.D_COMMUTE_DATE = time;
modTqcRollCommute.C_STL_GRD_AFTER = strGrd;
modTqcRollCommute.C_STD_CODE_AFTER = strStdCode;
modTqcRollCommute.C_SPEC_AFTER = modProduct.C_SPEC;
modTqcRollCommute.C_MAT_CODE_AFTER = strMatCode;
modTqcRollCommute.C_MAT_DESC_AFTER = strMatName;
modTqcRollCommute.C_REASON_DEPMT_ID = strZrdwID;
modTqcRollCommute.C_REASON_DEPMT_DESC = strZrdwName;
modTqcRollCommute.C_ZYX1_AFTER = strZYX1;
modTqcRollCommute.C_ZYX2_AFTER = strZYX2;
modTqcRollCommute.C_EMP_ID = strUserID;
modTqcRollCommute.C_REMARK = strRemark;
modTqcRollCommute.C_MASTER_ID = C_MASTER_ID;
modTqcRollCommute.C_GP_BEFORE_ID = C_GP_BEFORE_ID;
modTqcRollCommute.C_GP_AFTER_ID = C_GP_AFTER_ID;
modTqcRollCommute.C_JUDGE_LEV_BP_AFTER = strPDDJ;
modTqcRollCommute.C_BZYQ_AFTER = strBZYQ;
modTqcRollCommute.C_BZYQ_BEFORE = modProduct.C_BZYQ;
modTqcRollCommute.C_COMMUTE_REASON = strGPYY;
if (dal.Add_Trans(modTqcRollCommute))
{
modProduct.C_STD_CODE = strStdCode;
modProduct.C_STL_GRD = strGrd;
modProduct.C_MAT_DESC = strMatName;
modProduct.C_MAT_CODE = strMatCode;
modProduct.C_MASTER_ID = C_MASTER_ID;
modProduct.C_JUDGE_LEV_ZH = strPDDJ;
modProduct.C_GP_BEFORE_ID = C_GP_BEFORE_ID;
modProduct.C_GP_AFTER_ID = C_GP_AFTER_ID;
modProduct.C_ZYX1 = strZYX1;
modProduct.C_ZYX2 = strZYX2;
modProduct.C_BZYQ = strBZYQ;
modProduct.C_JUDGE_LEV_ZH = strPDDJ;
modProduct.C_IS_PD = "N";
modProduct.C_IS_QR = "Y";
modProduct.C_QR_USER = strUserID;
modProduct.D_QR_DATE = time;
modProduct.C_DESIGN_NO = strDesignNo;
modProduct.C_QGP_STATE = "Y";
modProduct.C_COMMUTE_REASON = strGPYY;
if (!dalTrcRollProduct.Update_Trans(modProduct))
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("改判失败，请检查改判的信息！");
}
}
else
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("改判失败，添加改判记录失败!");
}
}
}
//综合判定需要
if (!dalTrcRollProduct.Update_Batch_No(strBatch))
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("改判失败，请检查批号！");
}
string result_NC = dalInterface.SendXml_GP(strUrl, C_MASTER_ID, C_GP_BEFORE_ID, C_GP_AFTER_ID);
if (result_NC != "1")
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return(result_NC);
}
TransactionHelper_SQL.Commit();
TransactionHelper.Commit();
}
catch (Exception ex)
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return(ex.Message);
}
return(result);
}
/// <summary>
/// 保存特殊信息
/// </summary>
/// <param name="dr">需要添加特殊信息的批号信息</param>
/// <param name="strTSXX">特殊信息</param>
/// <returns></returns>
public string Cancle_TSXX(DataRow dr)
{
string result = "1";
try
{
TransactionHelper.BeginTransaction();
string userID = RV.UI.UserInfo.UserID;
DateTime dTime = RV.UI.ServerTime.timeNow();
Dal_TRC_ROLL_PRODCUT dalTrcRollProduct = new Dal_TRC_ROLL_PRODCUT();
Mod_TQC_COMPRE_ROLL model = dal.GetModel(dr["C_ID"].ToString());
if (model != null)
{
model.C_PCINFO = "";
if (!dal.Update_Trans(model))
{
TransactionHelper.RollBack();
return("保存特殊信息失败！");
}
DataTable dt_Details = dalTrcRollProduct.Get_Details(dr["批号"].ToString(), dr["执行标准"].ToString(), dr["物料编码"].ToString(), dr["钢种"].ToString(), dr["炉号"].ToString(), dr["表判结果"].ToString(), dr["不合格原因"].ToString()).Tables[0];
if (dt_Details.Rows.Count > 0)
{
string sql = "";
for (int kk = 0; kk < dt_Details.Rows.Count; kk++)
{
Mod_TRC_ROLL_PRODCUT modProduct = dalTrcRollProduct.GetModel(dt_Details.Rows[kk]["C_ID"].ToString());
if (modProduct != null)
{
modProduct.C_PCINFO = modProduct.C_PCINFO.Replace("厂外时效", "");
string strDJ = "";
if (string.IsNullOrEmpty(modProduct.C_JUDGE_LEV_ZH))
{
strDJ = "DP";
}
else
{
strDJ = modProduct.C_JUDGE_LEV_ZH;
}
sql = "insert into ReZJB_GPD(Barcode,WGDH,CK,HW,PCH,WLH,WLMC,SX,PH,GG,BB,GH,ZL,BZ,RQ,RKType,RKRY,WeightRQ,ProduceData,PCInfo,vfree0,vfree3,GPTYPE,ZJBstatus,CAPPK,insertts,vfree1,vfree2) values('" + modProduct.C_BARCODE + "','" + modProduct.C_TRC_ROLL_MAIN_ID + "','" + modProduct.C_LINEWH_CODE + "','" + modProduct.C_LINEWH_LOC_CODE + "','" + modProduct.C_BATCH_NO + "','" + modProduct.C_MAT_CODE + "','" + modProduct.C_MAT_DESC + "','" + strDJ + "','" + modProduct.C_STL_GRD + "','" + modProduct.C_SPEC + "mm','" + modProduct.C_GROUP + "','" + modProduct.C_TICK_NO + "','" + modProduct.N_WGT + "','" + modProduct.C_STD_CODE + "','" + modProduct.D_RKRQ + "','" + modProduct.C_MOVE_DESC + "','" + modProduct.C_RKRY + "','" + modProduct.D_WEIGHT_DT + "','" + modProduct.D_PRODUCE_DATE + "','" + modProduct.C_PCINFO + "','" + modProduct.C_STOVE + "','" + modProduct.C_BZYQ + "','','0','" + modProduct.C_ID + "','" + dTime + "','" + modProduct.C_ZYX1.ToString() + "','" + modProduct.C_ZYX2.ToString() + "')";
if (TransactionHelper_SQL.ExecuteSql(sql) == 0)
{
TransactionHelper.RollBack();
return("特殊信息传到条码时出错！");
}
modProduct.C_EMP_ID = userID;
modProduct.C_PLANT_DESC = dTime.ToString();
if (!dalTrcRollProduct.Update_Trans_XL(modProduct))
{
TransactionHelper.RollBack();
return("保存特殊信息出错！");
}
}
else
{
TransactionHelper.RollBack();
return("没有找到线材信息！");
}
}
}
else
{
TransactionHelper.RollBack();
return("特殊信息传到条码时出错！");
}
}
TransactionHelper.Commit();
}
catch (Exception ex)
{
TransactionHelper.RollBack();
return("0");
}
return(result);
}
/// <summary>
/// 线材综合判定确认
/// </summary>
/// <param name="strBatchNo">批号</param>
/// <param name="strUrl">xml地址</param>
/// <returns></returns>
public string Roll_Compre_OK(string strBatchNo, string strUrl)
{
string result = "1";
try
{
Dal_TRC_ROLL_PRODCUT dalTrcRollProduct = new Dal_TRC_ROLL_PRODCUT();
Dal_TRC_ROLL_WGD dalTrcRollWgd = new Dal_TRC_ROLL_WGD();
Dal_TQC_ROLL_COMMUTE DalTqcRollCommute = new Dal_TQC_ROLL_COMMUTE();
Dal_Interface_NC_Roll_KC4N_ZP dal_interface = new Dal_Interface_NC_Roll_KC4N_ZP();
Dal_Interface_NC_Roll_KC4N_ZP_No_WGD dal_interface_No_Wgd = new Dal_Interface_NC_Roll_KC4N_ZP_No_WGD();
Dal_TQR_ZBS_ITEM dalTqrZbsItem = new Dal_TQR_ZBS_ITEM();
Dal_TQC_COMPRE_ITEM_RESULT dalTqcCompreItemResult = new Dal_TQC_COMPRE_ITEM_RESULT();
Dal_TQC_PHYSICS_RESULT_MAIN dalTqcPhysicsResultMain = new Dal_TQC_PHYSICS_RESULT_MAIN();
TransactionHelper.BeginTransaction();
TransactionHelper_SQL.BeginTransaction();
string strUserID = RV.UI.UserInfo.userID;
DateTime time = RV.UI.ServerTime.timeNow();
string C_MASTER_ID = "";
string C_GP_BEFORE_ID = "";
string C_GP_AFTER_ID = "";
DataTable dt_CompreRoll = dal.Get_List(strBatchNo).Tables[0];
if (dt_CompreRoll.Rows.Count > 0)
{
int num = 0;
for (int i = 0; i < dt_CompreRoll.Rows.Count; i++)
{
num++;
Mod_TQC_COMPRE_ROLL modTqcCompreRoll = dal.GetModel(dt_CompreRoll.Rows[i]["C_ID"].ToString());
if (!string.IsNullOrEmpty(modTqcCompreRoll.C_RESULT_PEOPLE) || !string.IsNullOrEmpty(modTqcCompreRoll.C_RESULT_ALL))
{
//判定结果回写实绩表
string strResult = "";
if (!string.IsNullOrEmpty(modTqcCompreRoll.C_RESULT_PEOPLE))
{
strResult = modTqcCompreRoll.C_RESULT_PEOPLE;
}
else
{
strResult = modTqcCompreRoll.C_RESULT_ALL;
}
if (strResult == "N")
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("综判等级为N，请选择人工判定等级！");
}
modTqcCompreRoll.C_QR_STATE = "Y";
modTqcCompreRoll.C_EMP_ID = strUserID;
modTqcCompreRoll.D_MOD_DT = time;
if (!dal.Update_Trans(modTqcCompreRoll))
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("操作失败！");
}
DataTable dt = DalTqcRollCommute.GetList_max_Trans().Tables[0];
if (string.IsNullOrEmpty(dt.Rows[0]["C_GP_AFTER_ID"].ToString()))
{
C_GP_AFTER_ID = "ph" + time.ToString("yyMMdd00001");
}
else
{
C_GP_AFTER_ID = "ph" + (Convert.ToInt64(dt.Rows[0]["C_GP_AFTER_ID"].ToString()) + 1).ToString();
}
if (!dalTrcRollProduct.Update_Trans(strResult, modTqcCompreRoll.C_EMP_ID, modTqcCompreRoll, C_GP_AFTER_ID))
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("操作失败！");
}
}
else
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("请先选择人工判定等级！");
}
}
int num_main = dalTqcPhysicsResultMain.Get_Count(strBatchNo);
if (num_main > 0)
{
if (!dalTqcPhysicsResultMain.Update_PD_Trans(strBatchNo))
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("更新判定状态失败！");
}
}
if (num == dt_CompreRoll.Rows.Count)
{
#region 步重量
DataTable dtTM = dal.Get_TM_List(strBatchNo).Tables[0];
if (dtTM.Rows.Count > 0)
{
for (int i = 0; i < dtTM.Rows.Count; i++)
{
if (!dalTrcRollProduct.Update_Wgt_Trans(strBatchNo, dtTM.Rows[i]["GH"].ToString(), dtTM.Rows[i]["ZL"].ToString()))
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("更新重量失败！");
}
}
}
else
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("没有找到条码库存信息，判定失败！");
}
#endregion
Mod_TRC_ROLL_WGD mod_wgd = dalTrcRollWgd.Get_WGD_Modle(strBatchNo);//获取完工单信息
if (mod_wgd != null)
{
DataTable dt_Group = dalTrcRollProduct.Get_List_ByGroup(strBatchNo).Tables[0];
for (int i = 0; i < dt_Group.Rows.Count; i++)
{
#region 更新线材实绩表
DataTable dt = DalTqcRollCommute.GetList_max_MasterID_Trans().Tables[0];
if (string.IsNullOrEmpty(dt.Rows[0]["C_MASTER_ID"].ToString()))
{
C_MASTER_ID = "sj" + time.ToString("yyMMdd00001");
}
else
{
C_MASTER_ID = "sj" + (Convert.ToInt64(dt.Rows[0]["C_MASTER_ID"].ToString()) + 1).ToString();
}
if (string.IsNullOrEmpty(dt.Rows[0]["C_GP_BEFORE_ID"].ToString()))
{
C_GP_BEFORE_ID = "pq" + time.ToString("yyMMdd00001");
}
else
{
C_GP_BEFORE_ID = "pq" + (Convert.ToInt64(dt.Rows[0]["C_GP_BEFORE_ID"].ToString()) + 1).ToString();
}
if (!dalTrcRollProduct.Update_Trans(C_MASTER_ID, C_GP_BEFORE_ID, dt_Group.Rows[i]["C_STD_CODE"].ToString(), dt_Group.Rows[i]["C_MAT_CODE"].ToString(), dt_Group.Rows[i]["C_ZYX1"].ToString(), dt_Group.Rows[i]["C_ZYX2"].ToString(), strBatchNo))
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("操作失败！");
}
#endregion
#region 条码
DataTable dt_Details = dalTrcRollProduct.Get_Details(strBatchNo, dt_Group.Rows[i]["C_STD_CODE"].ToString(), dt_Group.Rows[i]["C_MAT_CODE"].ToString(), dt_Group.Rows[i]["C_ZYX1"].ToString(), dt_Group.Rows[i]["C_ZYX2"].ToString()).Tables[0];
if (dt_Details.Rows.Count > 0)
{
string sql = "";
for (int kk = 0; kk < dt_Details.Rows.Count; kk++)
{
if (mod_wgd.C_MRSX.ToString() == "DP")
{
sql = "insert into ReZJB_GPD(Barcode,WGDH,CK,HW,PCH,WLH,WLMC,SX,PH,GG,BB,GH,ZL,BZ,RQ,RKType,RKRY,WeightRQ,ProduceData,PCInfo,vfree0,vfree3,GPTYPE,ZJBstatus,CAPPK,insertts,vfree1,vfree2) values('" + dt_Details.Rows[kk]["C_BARCODE"] + "','" + dt_Details.Rows[kk]["C_TRC_ROLL_MAIN_ID"] + "','" + dt_Details.Rows[kk]["C_LINEWH_CODE"] + "','" + dt_Details.Rows[kk]["C_LINEWH_LOC_CODE"] + "','" + dt_Details.Rows[kk]["C_BATCH_NO"] + "','" + dt_Details.Rows[kk]["C_MAT_CODE"] + "','" + dt_Details.Rows[kk]["C_MAT_DESC"] + "','" + dt_Details.Rows[kk]["C_JUDGE_LEV_ZH"] + "','" + dt_Details.Rows[kk]["C_STL_GRD"] + "','" + dt_Details.Rows[kk]["C_SPEC"] + "mm','" + dt_Details.Rows[kk]["C_GROUP"] + "','" + dt_Details.Rows[kk]["C_TICK_NO"] + "','" + dt_Details.Rows[kk]["N_WGT"] + "','" + dt_Details.Rows[kk]["C_STD_CODE"] + "','" + dt_Details.Rows[kk]["D_RKRQ"] + "','" + dt_Details.Rows[kk]["C_MOVE_DESC"] + "','" + dt_Details.Rows[kk]["C_RKRY"] + "','" + dt_Details.Rows[kk]["D_WEIGHT_DT"] + "','" + dt_Details.Rows[kk]["D_PRODUCE_DATE"] + "','" + dt_Details.Rows[kk]["C_PCINFO"] + "','" + dt_Details.Rows[kk]["C_STOVE"] + "','" + dt_Details.Rows[kk]["C_BZYQ"] + "','','0','" + dt_Details.Rows[kk]["C_ID"] + "','" + time + "','" + dt_Details.Rows[kk]["C_ZYX1"].ToString() + "','" + dt_Details.Rows[kk]["C_ZYX2"].ToString() + "')";
if (TransactionHelper_SQL.ExecuteSql(sql) == 0)
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("信息传到条码时出错！");
}
}
else
{
if (dt_Details.Rows[kk]["C_JUDGE_LEV_BP"].ToString() != dt_Details.Rows[kk]["C_JUDGE_LEV_ZH"].ToString())
{
sql = "insert into ReZJB_GPD(Barcode,WGDH,CK,HW,PCH,WLH,WLMC,SX,PH,GG,BB,GH,ZL,BZ,RQ,RKType,RKRY,WeightRQ,ProduceData,PCInfo,vfree0,vfree3,GPTYPE,ZJBstatus,CAPPK,insertts,vfree1,vfree2) values('" + dt_Details.Rows[kk]["C_BARCODE"] + "','" + dt_Details.Rows[kk]["C_TRC_ROLL_MAIN_ID"] + "','" + dt_Details.Rows[kk]["C_LINEWH_CODE"] + "','" + dt_Details.Rows[kk]["C_LINEWH_LOC_CODE"] + "','" + dt_Details.Rows[kk]["C_BATCH_NO"] + "','" + dt_Details.Rows[kk]["C_MAT_CODE"] + "','" + dt_Details.Rows[kk]["C_MAT_DESC"] + "','" + dt_Details.Rows[kk]["C_JUDGE_LEV_ZH"] + "','" + dt_Details.Rows[kk]["C_STL_GRD"] + "','" + dt_Details.Rows[kk]["C_SPEC"] + "mm','" + dt_Details.Rows[kk]["C_GROUP"] + "','" + dt_Details.Rows[kk]["C_TICK_NO"] + "','" + dt_Details.Rows[kk]["N_WGT"] + "','" + dt_Details.Rows[kk]["C_STD_CODE"] + "','" + dt_Details.Rows[kk]["D_RKRQ"] + "','" + dt_Details.Rows[kk]["C_MOVE_DESC"] + "','" + dt_Details.Rows[kk]["C_RKRY"] + "','" + dt_Details.Rows[kk]["D_WEIGHT_DT"] + "','" + dt_Details.Rows[kk]["D_PRODUCE_DATE"] + "','" + dt_Details.Rows[kk]["C_PCINFO"] + "','" + dt_Details.Rows[kk]["C_STOVE"] + "','" + dt_Details.Rows[kk]["C_BZYQ"] + "','','0','" + dt_Details.Rows[kk]["C_ID"] + "','" + time + "','" + dt_Details.Rows[kk]["C_ZYX1"].ToString() + "','" + dt_Details.Rows[kk]["C_ZYX2"].ToString() + "')";
if (TransactionHelper_SQL.ExecuteSql(sql) == 0)
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("信息传到条码时出错！");
}
}
}
}
}
else
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("信息传到条码时出错！");
}
#endregion
#region NC
string sql_NC = "select count(distinct t.STORCODE) from XGERP50.V_ONHAND_XC t where t.批次号='" + strBatchNo + "' AND T.INVTYPE='" + dt_Group.Rows[i]["C_STL_GRD"].ToString() + "' AND T.INVCODE='" + dt_Group.Rows[i]["C_MAT_CODE"].ToString() + "' ";
int countNC = dal.Get_NC_Batch_Count(sql_NC);
if (countNC > 1)
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("该批次信息不在同一个仓库，不能判定！");
}
else if (countNC == 0)
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("该批次信息还没有入库！");
}
string interface_nc = dal_interface.SendXml_GP(strUrl, strBatchNo, C_MASTER_ID, dt_Group.Rows[i]["C_MAT_CODE"].ToString(), dt_Group.Rows[i]["N_WGT"].ToString(), dt_Group.Rows[i]["QUA"].ToString(), dt_Group.Rows[i]["C_ZYX1"].ToString(), dt_Group.Rows[i]["C_ZYX2"].ToString(), mod_wgd, C_GP_BEFORE_ID);
if (interface_nc != "1")
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return(interface_nc);
}
#endregion
}
}
else
{
DataTable dt_Group = dalTrcRollProduct.Get_List_ByGroup(strBatchNo).Tables[0];
for (int i = 0; i < dt_Group.Rows.Count; i++)
{
#region 更新线材实绩表
DataTable dt = DalTqcRollCommute.GetList_max_MasterID_Trans().Tables[0];
if (string.IsNullOrEmpty(dt.Rows[0]["C_MASTER_ID"].ToString()))
{
C_MASTER_ID = "sj" + time.ToString("yyMMdd00001");
}
else
{
C_MASTER_ID = "sj" + (Convert.ToInt64(dt.Rows[0]["C_MASTER_ID"].ToString()) + 1).ToString();
}
if (string.IsNullOrEmpty(dt.Rows[0]["C_GP_BEFORE_ID"].ToString()))
{
C_GP_BEFORE_ID = "pq" + time.ToString("yyMMdd00001");
}
else
{
C_GP_BEFORE_ID = "pq" + (Convert.ToInt64(dt.Rows[0]["C_GP_BEFORE_ID"].ToString()) + 1).ToString();
}
if (!dalTrcRollProduct.Update_Trans(C_MASTER_ID, C_GP_BEFORE_ID, dt_Group.Rows[i]["C_STD_CODE"].ToString(), dt_Group.Rows[i]["C_MAT_CODE"].ToString(), dt_Group.Rows[i]["C_ZYX1"].ToString(), dt_Group.Rows[i]["C_ZYX2"].ToString(), strBatchNo))
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("操作失败！");
}
#endregion
#region 条码
DataTable dt_Details = dalTrcRollProduct.Get_Details(strBatchNo, dt_Group.Rows[i]["C_STD_CODE"].ToString(), dt_Group.Rows[i]["C_MAT_CODE"].ToString(), dt_Group.Rows[i]["C_ZYX1"].ToString(), dt_Group.Rows[i]["C_ZYX2"].ToString()).Tables[0];
if (dt_Details.Rows.Count > 0)
{
string sql = "";
for (int kk = 0; kk < dt_Details.Rows.Count; kk++)
{
sql = "insert into ReZJB_GPD(Barcode,WGDH,CK,HW,PCH,WLH,WLMC,SX,PH,GG,BB,GH,ZL,BZ,RQ,RKType,RKRY,WeightRQ,ProduceData,PCInfo,vfree0,vfree3,GPTYPE,ZJBstatus,CAPPK,insertts,vfree1,vfree2) values('" + dt_Details.Rows[kk]["C_BARCODE"] + "','" + dt_Details.Rows[kk]["C_TRC_ROLL_MAIN_ID"] + "','" + dt_Details.Rows[kk]["C_LINEWH_CODE"] + "','" + dt_Details.Rows[kk]["C_LINEWH_LOC_CODE"] + "','" + dt_Details.Rows[kk]["C_BATCH_NO"] + "','" + dt_Details.Rows[kk]["C_MAT_CODE"] + "','" + dt_Details.Rows[kk]["C_MAT_DESC"] + "','" + dt_Details.Rows[kk]["C_JUDGE_LEV_ZH"] + "','" + dt_Details.Rows[kk]["C_STL_GRD"] + "','" + dt_Details.Rows[kk]["C_SPEC"] + "mm','" + dt_Details.Rows[kk]["C_GROUP"] + "','" + dt_Details.Rows[kk]["C_TICK_NO"] + "','" + dt_Details.Rows[kk]["N_WGT"] + "','" + dt_Details.Rows[kk]["C_STD_CODE"] + "','" + dt_Details.Rows[kk]["D_RKRQ"] + "','" + dt_Details.Rows[kk]["C_MOVE_DESC"] + "','" + dt_Details.Rows[kk]["C_RKRY"] + "','" + dt_Details.Rows[kk]["D_WEIGHT_DT"] + "','" + dt_Details.Rows[kk]["D_PRODUCE_DATE"] + "','" + dt_Details.Rows[kk]["C_PCINFO"] + "','" + dt_Details.Rows[kk]["C_STOVE"] + "','" + dt_Details.Rows[kk]["C_BZYQ"] + "','','0','" + dt_Details.Rows[kk]["C_ID"] + "','" + time + "','" + dt_Details.Rows[kk]["C_ZYX1"].ToString() + "','" + dt_Details.Rows[kk]["C_ZYX2"].ToString() + "')";
if (TransactionHelper_SQL.ExecuteSql(sql) == 0)
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("信息传到条码时出错！");
}
}
}
else
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("信息传到条码时出错！");
}
#endregion
#region NC
string sql_NC = "select count(distinct t.STORCODE) from XGERP50.V_ONHAND_XC t where t.批次号='" + strBatchNo + "' AND T.INVTYPE='" + dt_Group.Rows[i]["C_STL_GRD"].ToString() + "' AND T.INVCODE='" + dt_Group.Rows[i]["C_MAT_CODE"].ToString() + "' ";
int countNC = dal.Get_NC_Batch_Count(sql_NC);
if (countNC > 1)
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("该批次信息不在同一个仓库，不能判定！");
}
else if (countNC == 0)
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("该批次信息还没有入库！");
}
string interface_nc = dal_interface_No_Wgd.SendXml_GP(strUrl, strBatchNo, C_MASTER_ID, dt_Group.Rows[i]["C_MAT_CODE"].ToString(), dt_Group.Rows[i]["N_WGT"].ToString(), dt_Group.Rows[i]["QUA"].ToString(), dt_Group.Rows[i]["C_ZYX1"].ToString(), dt_Group.Rows[i]["C_ZYX2"].ToString(), C_GP_BEFORE_ID);
if (interface_nc != "1")
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return(interface_nc);
}
#endregion
}
}
}
else
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return("信息有误！");
}
}
TransactionHelper.Commit();
TransactionHelper_SQL.Commit();
}
catch (Exception ex)
{
TransactionHelper.RollBack();
TransactionHelper_SQL.RollBack();
return(ex.Message);
}
return(result);
}
