private ControlCategory GetTargetingSettings()
{
var peekToggleBox = new TerminalOnOffButton()
{
Name = "Peek",
Value = Cfg.targeting.enablePeek,
CustomValueGetter = () => Cfg.targeting.enablePeek,
ControlChangedHandler = ((sender, args) => Cfg.targeting.enablePeek = (sender as TerminalOnOffButton).Value),
ToolTip = new RichText(ToolTip.DefaultText)
{
"Enables/disables preview of block configuration"
},
};
// Close if not in view
var autoCloseBox = new TerminalCheckbox()
{
Name = "Close if target not in sight",
Value = Cfg.targeting.closeIfNotInView,
CustomValueGetter = () => Cfg.targeting.closeIfNotInView,
ControlChangedHandler = ((sender, args) => Cfg.targeting.closeIfNotInView = (sender as TerminalCheckbox).Value),
};
// Can open while holding tools
var toolOpenBox = new TerminalCheckbox()
{
Name = "Can open while placing",
Value = Cfg.targeting.canOpenIfPlacing,
CustomValueGetter = () => Cfg.targeting.canOpenIfPlacing,
ControlChangedHandler = ((sender, args) => Cfg.targeting.canOpenIfPlacing = (sender as TerminalCheckbox).Value),
ToolTip = new RichText(ToolTip.DefaultText)
{
"If unchecked, Build Vision will not open\n" +
"while placing blocks. Only works if Legacy\n" +
"Mode is off."
},
};
// Open range slider
var openRangeSlider = new TerminalSlider()
{
Name = "Max open range",
Min = 2.5f,
Max = 20f,
ValueText = $"{Cfg.targeting.maxOpenRange.Round(1)}m",
Value = (float)Cfg.targeting.maxOpenRange,
CustomValueGetter = () => (float)Cfg.targeting.maxOpenRange,
ControlChangedHandler = (sender, args) =>
{
var slider = sender as TerminalSlider;
Cfg.targeting.maxOpenRange = slider.Value;
slider.ValueText = $"{slider.Value.Round(1)}m";
},
ToolTip = new RichText(ToolTip.DefaultText)
{
"Build Vision will not open for target\n" +
"blocks beyond this distance"
},
};
// Control range slider
var controlRangeSlider = new TerminalSlider()
{
Name = "Max control range",
Min = 2.5f,
Max = 60f,
ValueText = $"{Cfg.targeting.maxControlRange.Round(1)}m",
Value = (float)Cfg.targeting.maxControlRange.Round(1),
CustomValueGetter = () => (float)Cfg.targeting.maxControlRange,
ControlChangedHandler = (sender, args) =>
{
var slider = sender as TerminalSlider;
Cfg.targeting.maxControlRange = slider.Value;
slider.ValueText = $"{slider.Value.Round(1)}m";
},
ToolTip = new RichText(ToolTip.DefaultText)
{
"Auto-close distance after Build Vision\n" +
"has been opened"
},
};
// Close if not in view
var specLimitBox = new TerminalCheckbox()
{
Name = "Limit spectator range",
Value = Cfg.targeting.isSpecRangeLimited,
CustomValueGetter = () => Cfg.targeting.isSpecRangeLimited,
ControlChangedHandler = ((sender, args) => Cfg.targeting.isSpecRangeLimited = (sender as TerminalCheckbox).Value),
ToolTip = new RichText(ToolTip.DefaultText)
{
"If enabled the auto-close distance will be\n" +
"enforced for the spectator camera."
},
};
var targetingResetButton = new TerminalButton()
{
Name = "Reset targeting settings",
ControlChangedHandler = (sender, args) => BvConfig.Current.targeting = TargetingConfig.Defaults,
};
return(new ControlCategory()
{
HeaderText = "Targeting",
SubheaderText = "Configure block targeting behavior",
TileContainer =
{
new ControlTile()
{
peekToggleBox, autoCloseBox, toolOpenBox,
},
new ControlTile()
{
openRangeSlider, controlRangeSlider, specLimitBox
},
new ControlTile()
{
targetingResetButton
}
},
});
}
private ControlCategory GetGuiSettings()
{
// Legacy mode toggle
var legacyToggleBox = new TerminalOnOffButton()
{
Name = "Legacy Mode",
Value = Cfg.genUI.legacyModeEnabled,
CustomValueGetter = () => Cfg.genUI.legacyModeEnabled,
ControlChangedHandler = (sender, args) =>
{
bool value = (sender as TerminalOnOffButton).Value;
if (value != Cfg.genUI.legacyModeEnabled)
{
Cfg.genUI.legacyModeEnabled = value;
bindsPage.Enabled = !value;
legacyBindsPage.Enabled = value;
if (Cfg.genUI.legacyModeEnabled)
{
BvBinds.Cfg = new BindsConfig
{
modifierGroup = BindsConfig.DefaultModifiers,
mainGroup = BindsConfig.DefaultLegacyMain,
secondaryGroup = BindsConfig.DefaultLegacySecondary,
dupeGroup = BindsConfig.DefaultLegacyDupe
};
}
else
{
BvBinds.Cfg = new BindsConfig
{
modifierGroup = BindsConfig.DefaultModifiers,
mainGroup = BindsConfig.DefaultMain,
secondaryGroup = BindsConfig.DefaultSecondary,
dupeGroup = BindsConfig.DefaultDupe
};
}
}
},
ToolTip = new RichText(ToolTip.DefaultText)
{
"Makes old list menu the primary menu\n" +
"and reverts to the v2.5 control scheme.\n" +
"Changing this will overwrite your binds."
}
};
// Cursor sensitivity
var cursorSensitivity = new TerminalSlider()
{
Name = "Wheel Cursor Sensitivity",
Min = .3f,
Max = 2f,
Value = BvConfig.Current.genUI.cursorSensitivity,
ValueText = $"{(BvConfig.Current.genUI.hudScale * 100f).Round()}%",
CustomValueGetter = () => BvConfig.Current.genUI.cursorSensitivity,
ControlChangedHandler = (sender, args) =>
{
var slider = sender as TerminalSlider;
BvConfig.Current.genUI.cursorSensitivity = slider.Value;
slider.ValueText = $"{(slider.Value * 100f).Round()}%";
},
ToolTip = new RichText(ToolTip.DefaultText)
{
"Controls speed for scrolling using the mouse"
}
};
var tile1 = new ControlTile()
{
legacyToggleBox,
cursorSensitivity,
};
// Menu size
var menuScale = new TerminalSlider()
{
Name = "Menu scale",
Min = .75f,
Max = 2f,
Value = BvConfig.Current.genUI.hudScale,
ValueText = $"{(BvConfig.Current.genUI.hudScale * 100f).Round()}%",
CustomValueGetter = () => BvConfig.Current.genUI.hudScale,
ControlChangedHandler = (sender, args) =>
{
var slider = sender as TerminalSlider;
BvConfig.Current.genUI.hudScale = slider.Value;
slider.ValueText = $"{(slider.Value * 100f).Round()}%";
}
};
// Menu opacity
var opacity = new TerminalSlider()
{
Name = "Menu opacity",
Min = .5f,
Max = 1f,
Value = BvConfig.Current.genUI.hudOpacity,
ValueText = $"{(BvConfig.Current.genUI.hudOpacity * 100f).Round()}%",
CustomValueGetter = () => BvConfig.Current.genUI.hudOpacity,
ControlChangedHandler = (sender, args) =>
{
var slider = sender as TerminalSlider;
BvConfig.Current.genUI.hudOpacity = slider.Value;
slider.ValueText = $"{(slider.Value * 100f).Round()}%";
}
};
var tile2 = new ControlTile()
{
menuScale,
opacity,
};
// Max visible properties
var listMaxVisibleSlider = new TerminalSlider()
{
Name = "List Max Visible",
Min = 6,
Max = 40,
Value = BvConfig.Current.genUI.listMaxVisible,
ValueText = $"{BvConfig.Current.genUI.listMaxVisible}",
CustomValueGetter = () => BvConfig.Current.genUI.listMaxVisible,
ControlChangedHandler = (sender, args) =>
{
var slider = sender as TerminalSlider;
BvConfig.Current.genUI.listMaxVisible = (int)slider.Value;
slider.ValueText = $"{(int)slider.Value}";
}
};
var wheelMaxVisibleSlider = new TerminalSlider()
{
Name = "Wheel Max Visible",
Min = 10,
Max = 30,
Value = BvConfig.Current.genUI.wheelMaxVisible,
ValueText = $"{BvConfig.Current.genUI.wheelMaxVisible}",
CustomValueGetter = () => BvConfig.Current.genUI.wheelMaxVisible,
ControlChangedHandler = (sender, args) =>
{
var slider = sender as TerminalSlider;
BvConfig.Current.genUI.wheelMaxVisible = (int)slider.Value;
slider.ValueText = $"{(int)slider.Value}";
}
};
var tile3 = new ControlTile()
{
listMaxVisibleSlider,
wheelMaxVisibleSlider,
};
// Clamp to screen edges
var clampToEdges = new TerminalCheckbox()
{
Name = "Clamp to screen edges",
Value = BvConfig.Current.genUI.clampHudPos,
CustomValueGetter = () => BvConfig.Current.genUI.clampHudPos,
ControlChangedHandler = ((sender, args) => BvConfig.Current.genUI.clampHudPos = (sender as TerminalCheckbox).Value),
ToolTip = new RichText(ToolTip.DefaultText)
{
"Prevents the menu from moving outside the bounds\n" +
"of the screen"
},
};
// Use custom position
var customPos = new TerminalCheckbox()
{
Name = "Use custom position",
Value = BvConfig.Current.genUI.useCustomPos,
CustomValueGetter = () => BvConfig.Current.genUI.useCustomPos,
ControlChangedHandler = ((sender, args) => BvConfig.Current.genUI.useCustomPos = (sender as TerminalCheckbox).Value),
ToolTip = new RichText(ToolTip.DefaultText)
{
"Sets menu to a user-defined fixed position"
},
};
// Set custom position
var setPosition = new TerminalDragBox()
{
Name = "Set custom position",
AlignToEdge = true,
CustomValueGetter = () => BvConfig.Current.genUI.hudPos,
ControlChangedHandler = ((sender, args) => BvConfig.Current.genUI.hudPos = (sender as TerminalDragBox).Value),
Value = BvConfig.Current.genUI.hudPos,
};
var tile4 = new ControlTile()
{
clampToEdges,
customPos,
setPosition,
};
var resetGuiButton = new TerminalButton()
{
Name = "Reset GUI settings",
ControlChangedHandler = (sender, args) => BvConfig.Current.genUI = UIConfig.Defaults,
};
var tile5 = new ControlTile()
{
resetGuiButton,
};
return(new ControlCategory()
{
HeaderText = "GUI Settings",
SubheaderText = "Customize appearance and menu positioning",
TileContainer = { tile1, tile2, tile3, tile4, tile5 }
});
}
