/// <summary>
/// 暂停
/// </summary>
public void Pause()
{
lock (this)
{
ChangeStatus(TaskRunStatus.Pausing);
TaskWorker.Change(Timeout.Infinite, Timeout.Infinite); //禁止再次回调
ChangeStatus(TaskRunStatus.Paused);
Logger.Debug("[{0}]暂停，计时器已暂停。(最后一次回调的任务可能还在执行)", this);
}
}
private void StopTask()
{
lock (this)
{
ChangeStatus(TaskRunStatus.Stoping);
TaskWorker.Change(Timeout.Infinite, Timeout.Infinite); //禁止再次回调
Task.Execution.RunStatus = TaskRunStatus.Stoped;
ChangeStatus(TaskRunStatus.Stoped);
Logger.Debug("[{0}] 停止，计时器已释放。", this);
}
}
/// <summary>
/// 暂停
/// </summary>
public void Pause()
{
lock (this)
{
ChangeStatus(TaskRunStatusType.Pausing);
//SaveExecution(); //先保存一次状态
TaskWorker.Change(Timeout.Infinite, Timeout.Infinite); //禁止再次回调
ChangeStatus(TaskRunStatusType.Paused);
Log.Debug($"[{this}]暂停，计时器已暂停。(最后一次回调的任务可能还在执行)");
}
}
private void StopTask()
{
lock (this)
{
ChangeStatus(TaskRunStatusType.Stoping);
TaskWorker.Change(Timeout.Infinite, Timeout.Infinite); //禁止再次回调
//SaveExecution(); //先保存一次状态
Task.Execution.RunStatus = TaskRunStatusType.Stoped;
ChangeStatus(TaskRunStatusType.Stoped);
Log.Debug($"[{this}] 停止，计时器已释放。");
}
}
/// <summary>
/// 恢复
/// </summary>
public void Resume()
{
lock (this)
{
ChangeStatus(TaskRunStatus.Running);
var now = SystemTime.Now();
var nextRun = Task.GetNextRunTime(now);
if (nextRun == null)
{
Logger.Warn("[{0}] 无法恢复，因为下次执行时间为null", this);
return;
}
var dueTime = nextRun.Value.Subtract(now);
TaskWorker.Change(dueTime /*第一次延时调用*/, TimeSpan.FromMilliseconds(-1) /*Note:回调时会更改调用延时，此周期设为无限*/); //重启计时器
Logger.Debug("[{0}] 暂停，计时器已恢复。(最后一次回调的任务可能还在执行)", this);
}
}
/// <summary>
/// 恢复
/// </summary>
public void Resume()
{
lock (this)
{
ChangeStatus(TaskRunStatusType.Running);
var now = SystemTime.Now();
var nextRun = Task.GetNextRunTime(now);
if (nextRun == null)
{
Log.Warn($"[{this}] 无法恢复，因为下次执行时间为null");
return;
}
var dueTime = nextRun.Value.Subtract(now);
TaskWorker.Change(dueTime /*第一次延时调用*/, TimeSpan.MaxValue); //重启计时器
Log.Debug($"[{this}] 暂停，计时器已恢复。(最后一次回调的任务可能还在执行)");
}
}
/// <summary>
/// 工作运行
/// Note:两次间隔有100毫秒左右的误差
/// </summary>
public virtual void Working()
{
try
{
// http://www.cnblogs.com/SharkBin/archive/2012/08/04/2622627.html
TaskWorker.Change(Timeout.Infinite, Timeout.Infinite); //暂停计时。
if (IsRemoving)
{
Logger.Warn("任务被标起为移除，回调中断，且任务不会被再次调用。");
return;
}
//执行今日任务
_runTimes++;
var now = SystemTime.Now();
Logger.Info("[{0}] 第{1}次执行开始。[{2}] ◇", this, _runTimes, now.ToShortTimeString());
ChangeStatus(TaskRunStatus.Working);
var val = new TaskResult();
try
{
val = WorkHandler(); //同步委托，任务执行[可能较耗时]
}
catch (Exception ex)
{
Logger.Error("执行任务<{0}>时发生异常:{1}", this.Task, ex);
val.Result = TaskResultType.Error;
val.ExtendMessage = ex.Message;
}
finally
{
ChangeStatus(TaskRunStatus.Worked);
Task.Execution.LastRun = now;
}
var runSpan = SystemTime.Now() - now;
Logger.Info("[{0}] 第{1}次执行结果[{2} : {3}] [Execution:{4}]", this, _runTimes, val.Result, val.Message, runSpan);
//Note:工作完成后的状态处理
//Note:注意，这里的错误次数实际上是执行失败的次数
if (val.Result.HasFlag(TaskResultType.Error))
{
var sleepInterval = ((TimeSpan)Task.WorkSetting.SleepInterval);
Task.Execution.SleepTimes++;
Logger.Warn("[{0}] 状态更新[{1}],休眠次数++ ，准备[{2}]后再次执行", this, val.Result, sleepInterval);
TaskWorker.Change(sleepInterval, TimeSpan.FromMilliseconds(-1));
return;
}
else
{
Task.Execution.RunTimes++;
var runInterval = Task.GetNextInterval();
if (runInterval == null)
{
ChangeStatus(TaskRunStatus.Removing);
Logger.Debug("[{0}] 下次运行时间为null，当前任务停止。", this);
return;
}
if (runInterval.Value.TotalMilliseconds > WorkerInterval * 5)
{
ChangeStatus(TaskRunStatus.Removing);
Logger.Debug("[{0}] 下次运行时间{1}，超过5倍工作线程间隔，暂时移除执行队列。当前任务停止。", this, runInterval);
return;
}
//var runInterval = runTime.Value.Subtract(now);
SaveExecution();
Logger.Debug("[{0}]第{1}次执行结束。 运行成功[Times:{2}] ，准备[{3}]后再次执行 ◆", this, _runTimes, Task.Execution.RunTimes, runInterval);
TaskWorker.Change(runInterval.Value, TimeSpan.FromMilliseconds(-1)); //Note:更改计时器约50多毫秒
}
#region 根据任务配置做出相应动作
//本次任务已完成,Note:只有本次任务达到所设条件才算是正常完成，正常完成后才更新最后成功完成的时间。
if ((Task.Execution.RunTimes >= Task.WorkSetting.Times && Task.WorkSetting.Times > 0) ||
(val.Result.HasFlag(TaskResultType.Finished)))
{
ChangeStatus(TaskRunStatus.Removing);
Logger.Debug("■ [{0}] ({1})完成。■", this, Task.Execution.LastSucceedRun);
return;
}
//根据设定，一旦有错误发生。立即停止
if (val.Result.HasFlag(TaskResultType.Error) && Task.WorkSetting.ErrorWay == ErrorWayType.Stop)
{
ChangeStatus(TaskRunStatus.Removing);
Logger.Info("▲ [{0}] 根据设定Stop，发生了错误一次，等待移除。▲", this);
return;
}
//根据设定，有错误时。休眠超期后停止
if (Task.Execution.SleepTimes >= Task.WorkSetting.SleepInterval.Times &&
Task.WorkSetting.SleepInterval.Times > 0 && Task.WorkSetting.ErrorWay == ErrorWayType.TryAndStop)
{
ChangeStatus(TaskRunStatus.Removing);
Logger.Info("▲ [{0}] 根据设定Sleep，发生了错误{Task.Execution.SleepTimes}次，等待移除。▲", this);
return;
}
#endregion
}
catch (Exception ex)
{
//Note:异常发生后停止该任务，不管任何原因
Logger.Error("[{0}] 执行异常，停止执行。{1}", this, ex);
Stop();
}
finally
{
}
}
/// <summary>
/// 工作运行
/// Note:两次间隔有100豪秒左右的误差
/// </summary>
public virtual void Working()
{
try
{
TaskWorker.Change(Timeout.Infinite, Timeout.Infinite); //暂停计时。
if (IsRemoving)
{
Log.Warn("任务被标起为移除，回调中断，且任务不会被再次调用。");
return;
}
//执行今日任务
_runTimes++;
var now = SystemTime.Now();
//Log.Info($"[{this}] 第{_runTimes}次执行开始。[{now:HH:mm:ss ffff}] ◇");
ChangeStatus(TaskRunStatusType.Working);
var val = new TaskResult();
try
{
val = WorkHandler(); //同步委托，任务执行[可能较耗时]
}
catch (Exception ex)
{
Log.Error(ex, $"执行任务<{Task}>时发生异常:");
//throw;
val.Result = TaskResultType.Error;
val.Message = ex.Message;
}
finally
{
ChangeStatus(TaskRunStatusType.Worked);
Task.Execution.LastRun = now;
}
var runSpan = SystemTime.Now() - now;
Log.Info($"[{this}] 第 {_runTimes} 次执行，结果 [{val.Result} : {val.Message}] [RuningTime:{runSpan}]");
//Note:工作完成后的状态处理
//Note:注意，这里的错误次数实际上是执行失败的次数
if (val.Result.HasFlag(TaskResultType.Error))
{
var sleepInterval = ((TimeSpan)Task.WorkSetting.SleepInterval);
Task.Execution.SleepTimes++;
Log.Warn($"[{this}] 状态更新[{val.Result}],休眠次数++ ，准备[{sleepInterval}]后再次执行");
TaskWorker.Change(sleepInterval, TimeSpan.FromMilliseconds(-1));
return;
}
else
{
Task.Execution.RunTimes++;
var runInterval = Task.GetNextInterval();
if (runInterval == null)
{
ChangeStatus(TaskRunStatusType.Removing);
Log.Debug($"[{this}] 下次运行时间为null，当前任务停止。");
return;
}
if (runInterval.Value.TotalMilliseconds > WorkerInterval * 3)
{
ChangeStatus(TaskRunStatusType.Removing);
Log.Debug($"[{this}] 下次运行时间{runInterval}，超过3倍工作线程间隔，暂时移除执行队列。当前任务停止。");
return;
}
//var runInterval = runTime.Value.Subtract(now);
SaveExecution();
Log.Debug($"[{this}]第{_runTimes}次执行结束。 运行成功[Times:{Task.Execution.RunTimes}] ，准备[{runInterval}]后再次执行 ◆");
TaskWorker.Change(runInterval.Value, TimeSpan.FromMilliseconds(-1)); //Note:更改计时器约50多毫秒
}
#region 根据任务配置做出相应动作
//本次任务已完成,Note:只有本次任务达到所设条件才算是正常完成，正常完成后才更新最后成功完成的时间。
if ((Task.Execution.RunTimes >= Task.WorkSetting.Times && Task.WorkSetting.Times > 0) ||
(val.Result.HasFlag(TaskResultType.Finished)))
{
//Task.Meta.Execution.LastSucceedRun = PathDate ?? now; //Note:可自动补全点
//Task.Meta.Execution.RunStatus = TaskRunStatusType.TodayComplete;
ChangeStatus(TaskRunStatusType.Removing);
Log.Debug($"■ [{this}] ({Task.Execution.LastSucceedRun})完成。■");
return;
}
//根据设定，一旦有错误发生。立即停止
if (val.Result.HasFlag(TaskResultType.Error) && Task.WorkSetting.ErrorWay == ErrorWayType.Stop)
{
ChangeStatus(TaskRunStatusType.Removing);
Log.Info($"▲ [{this}] 根据设定Stop，发生了错误一次，等待移除。▲");
return;
}
//根据设定，有错误时。休眠超期后停止
if (Task.Execution.SleepTimes >= Task.WorkSetting.SleepInterval.Times &&
Task.WorkSetting.SleepInterval.Times > 0 && Task.WorkSetting.ErrorWay == ErrorWayType.TryAndStop)
{
ChangeStatus(TaskRunStatusType.Removing);
Log.Info($"▲ [{this}] 根据设定Sleep，发生了错误{Task.Execution.SleepTimes}次，等待移除。▲");
return;
}
#endregion
}
catch (Exception ex)
{
//Note:异常发生后停止该任务，不管任何原因
Log.Error(ex, $"[{this}] 执行异常，停止执行。");
Stop();
//throw;
}
finally
{
}
}